DSPIC33EP512MC202-I/SO - 70 MIPS 16-bit DSC, 512KB Flash | Microchip
N.º da peça: DSPIC33EP512MC202-I/SO ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.54 | $4,54 |
| 10 | $4.32 | $43,20 |
| 100 | $4.05 | $405,00 |
| 500 | $3.9 | $1.950,00 |
| 1.000 | $3.72 | $3.720,00 |
DSPIC33EP512MC202-I/SO Visão geral
A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic interrupt architecture of a microcontroller. Within the power-management controller hierarchy, DSCs occupy the niche between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC, DSP-engine addressing modes, and high-resolution PWM peripherals on a single chip.
Key features include the dsPIC33E CPU core running at up to 70 MIPS, dual on-chip op amps, a motor control PWM (MCPWM) module with complementary outputs and dead-time control, and a quadrature encoder interface (QEI) for closed-loop servo feedback. The 512 KB self-programming Flash and 48 KB SRAM enable complex field-oriented control (FOC) algorithms and advanced observers to be executed with headroom.
The MC-family peripheral set targets embedded motor and power applications: high-speed PWM with edge- and center-aligned modes, multiple 12-bit ADC channels supporting simultaneous sampling, and DSP instructions (MAC, dual operand fetch) that accelerate PI loops, transforms, and filter kernels at deterministic rates.
Typical applications include BLDC and PMSM motor drives, industrial automation, digital power supplies (LLC, totem-pole PFC), power inverters, and appliance control. The I temperature grade (-40C to +85C) covers industrial environments.
Design consideration: budget supply decoupling on each VDD pin and place the VCAP stabilizing capacitor per the manufacturer datasheet to guarantee core-voltage integrity at 70 MIPS operation.
This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing, drop-in same-package alternatives, and practical design notes in one citable resource.
Alternativas drop-in para DSPIC33EP512MC202-I/SO — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33EP512MC202-I/SO (mesmo formato e footprint) — diferindo em Package, Core Architecture, Operating Temperature, Program Memory (Flash), Quadrature Encoder Interface.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33EP32MC202-I/SO
✅ Drop-In✓ Em estoque
$2.98 / unidade
Ver ficha técnica →DSPIC33EP32GP502T-E/SO
✅ Drop-In✓ Em estoque
$3.42 / unidade
Ver ficha técnica →DSPIC33EP512GP502-I/SO
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.95 / unidade
Ver ficha técnica →DSPIC33EP64MC202-I/SO
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$0.13 / unidade
Ver ficha técnica →DSPIC33EP128MC202-I/SO
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.92 / unidade
Ver ficha técnica →DSPIC33EP256MC202-I/SO
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.48 / unidade
Ver ficha técnica →DSPIC33EP512MC202-I/SO Classificações máximas e características elétricas
| Core Architecture | 16-bit dsPIC33E DSC |
| Maximum CPU Speed | 70 MIPS |
| Flash Memory | 512 KB (170K x 24) |
| SRAM | 48 KB |
| Encapsulamento | 28-SOIC (0.295 in, 7.50 mm width) |
| Temperatura de operação | -40C to +85C (I grade) |
| PWM Module | Motor Control PWM (MCPWM) |
| Quadrature Encoder Interface | Yes (QEI) |
| On-chip Op Amps | Yes (MC family analog) |
| Tipo de montagem | Surface Mount |
| Programming Interface | ICSP (In-Circuit Serial Programming) |
| Family | dsPIC 33EP |
Guia de Configuração de Pinos do DSPIC33EP512MC202-I/SO 28-soic (0.295 in, 7.50 mm width)
Configuração de pinos para DSPIC33EP512MC202-I/SO (pacote 28-soic (0.295 in, 7.50 mm width)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para DSPIC33EP512MC202-I/SO.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
DSPIC33EP512MC202-I/SO é adequado para 6 aplicaçãos: BLDC / PMSM Motor Drives, Digital Power Supplies (LLC / PFC), Industrial Automation and Robotics, Power Inverters and Solar Micro-Inverters, Appliance and HVAC Control, Test, Measurement and Instrumentation.
BLDC / PMSM Motor Drives
The DSPIC33EP512MC202-I/SO fits brushless DC and permanent-magnet synchronous motor control because its 70 MIPS DSP engine executes field-oriented control (FOC) loops at rates exceeding 10 kHz with deterministic latency, while the MCPWM module generates complementary PWM pairs with programmable dead-time and cycle-by-cycle current limiting. The quadrature encoder interface decodes position feedback directly, and on-chip op amps amplify shunt current signals without external amplifiers. Placed as the sole controller between current-sense shunts and a three-phase inverter gate-driver stage, the DSC closes torque, speed, and position loops in firmware. The 512 KB Flash leaves room for parameter identification routines, trajectory generators, and field-updatable bootloaders beyond the core control code.
Recomendado
Digital Power Supplies (LLC / PFC)
For LLC converters, totem-pole PFC, and synchronous buck stages, this DSC offers the high-resolution PWM, programmable dead-time, and fault tripping needed to switch safely at 100 kHz to 500 kHz while the 70 MIPS core runs 3p3z or PI compensators plus protection state machines. The 12-bit ADC samples input/output voltage and inductor current synchronized to the PWM period, eliminating jitter-induced noise in the feedback path. Firmware compensators adapt to load transients in ways fixed hardware compensators cannot, and the 512 KB Flash supports multiple product variants from one PCB. Expected benefit: closed-loop transient response in the tens of microseconds with full telemetry and fault logging in the remaining code headroom.
Recomendado
Industrial Automation and Robotics
In industrial automation nodes - servo axes, gantries, conveyors, and robotic joints - this controller combines deterministic motor control with communication headroom on one chip. The QEI counts encoder pulses in hardware, freeing the 70 MIPS core for motion profiling, and UART/SPI/I2C with peripheral pin select routes to RS-485, CAN via external transceiver, or EtherCAT-style companion chips. The -40C to +85C industrial grade and 28-SOIC surface-mount footprint survive cabinet and on-machine environments. Its DSP instructions accelerate vibration analysis and filter kernels used in predictive maintenance. Firmware is field-updatable over the 512 KB Flash, letting OEMs ship motion profiles and safety enhancements without hardware revision.
Recomendado
Power Inverters and Solar Micro-Inverters
Grid-tied and off-grid inverters demand simultaneous high-frequency PWM generation, fast overcurrent shutdown, and grid synchronization code - all delivered by this DSC's MCPWM fault inputs and DSP engine. The 70 MIPS core computes sine-reference generation, PLL-based grid locking, and MPPT algorithms concurrently, while hardware PWM dead-time protects the half-bridge power stage. ADC results are trigger-synchronized to PWM boundaries for clean current sampling of the switching waveform. The 28-SOIC package supports compact, thermally efficient layouts typical of micro-inverter PCBs. The 512 KB Flash stores anti-islanding routines, certification-mandated grid codes for multiple regions, and logging firmware, making one controller design adaptable to several product certifications.
Recomendado
Appliance and HVAC Control
Home appliances - washing machines, refrigerators, compressors, and HVAC blower systems - use sensorless BLDC motors that this DSC drives with position-observer firmware on the 70 MIPS core, eliminating hall sensors and reducing BOM cost. MCPWM complementary outputs drive the inverter stage while integrated op amps condition shunt currents, and the QEI handles units that do include encoders. The -40C to +85C range covers outdoor condenser units and unconditioned laundry rooms. The 512 KB Flash holds full user-interface logic, acoustic-noise-reduction modulation schemes, and self-diagnostics mandated by modern appliance standards. The 28-SOIC footprint supports two-layer control boards produced at consumer-electronics cost targets.
Recomendado
Test, Measurement and Instrumentation
Portable instruments - battery testers, load banks, impedance analyzers, and data loggers - benefit from this DSC's DSP instructions implementing FFTs, digital filters, and synchronous detection at 70 MIPS throughput. The MCPWM generates stimulus signals or switch-mode load control, while the 12-bit ADC with PWM-synchronized sampling acquires coherent measurement data, minimizing leakage error in spectral analysis. The 48 KB RAM buffers waveform segments for on-device processing or USB/UART upload. Firmware is field-upgradable through the 512 KB self-programming Flash, allowing instrument calibration data and new measurement modes to ship as updates. The industrial temperature grade and SOIC package suit bench and field-deployed instruments alike.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33EP512MC202-I/SO — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33EP32MC202-I/SO | DSPIC33EP32GP502T-E/SO | DSPIC33EP256MC202-I/SO | DSPIC33EP128MC202-I/SO |
|---|---|---|---|---|---|
| Package | 28-SOIC (7.50 mm) | 28-SOIC (7.50 mm) - same | 28-SOIC (7.50 mm) - same | 28-SOIC (7.50 mm) - same | 28-SOIC (7.50 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 512 KB (170K x 24) | 32 KB | 32 KB | 256 KB | 128 KB |
| Motor Control PWM (MCPWM) | Yes | Yes | No (GP family) | Yes | Yes |
| Quadrature Encoder Interface | Yes | Yes | No (GP family) | Yes | Yes |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +125C (E grade) | -40C to +85C | -40C to +85C |
Principais diferenciais
- Largest Flash in the same 28-SOIC footprint (vs DSPIC33EP256MC202-I/SO)
- MC-family motor-control analog front end (vs DSPIC33EP32GP502T-E/SO)
- Standard industrial temperature grade at full memory (vs DSPIC33EP512GP502-I/SO)
Notas de projeto
Estimated: budget one 0.1 uF ceramic capacitor per VDD pin placed within 2 mm of the pin, plus a 4.7-10 uF bulk capacitor near the device. The dsPIC33E core uses an internal regulator whose external VCAP stabilizing capacitor (per the manufacturer datasheet, typically a tantalum/ceramic around 10 uF with defined ESR range) must not be omitted - the core will not regulate without it. Verify the ESR window in the official datasheet before release; an out-of-range ESR can cause brown-out resets at 70 MIPS operation.
Route PWM outputs to the gate-driver stage on short, matched traces and keep the current-sense shunt kelvin connections directly at the op-amp inputs. Place the analog ground reference and shunt filtering so switching currents do not share return paths with the ADC reference. Keep the MCLR line short to the programming header (ICSP pins 1/4) so in-circuit programming and debugging remain possible after assembly. A solid ground plane under the SOIC body reduces ground bounce during simultaneous PWM switching.
Do not assume pin functions from other 28-pin Microchip parts: the dsPIC33EP family uses Peripheral Pin Select (PPS), so UART/SPI/PWM routings must be configured in code before the peripherals function. Design a unidirectional flash-size migration path: code written for the 512 KB MC202 will not fit on the 32 KB variants - verify worst-case code size with XC16 map files before cost-reducing to DSPIC33EP32MC202-I/SO. Finally, note the I-grade device is rated -40C to +85C; for 125C ambient use the E-grade variants such as DSPIC33EP32GP502T-E/SO.
Informações de conformidade
Compliance data was not present in the provided verified web data. Microchip catalog MCUs of this family are typically RoHS/lead-free compliant; confirm on the official Microchip product page before release.
