DSPIC33FJ16GP304T-I/PT - 16-bit DSC, 40 MIPS, 16KB Flash | Microchip
N.º da peça: DSPIC33FJ16GP304T-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $5.45 | $5,45 |
| 10 | $4.91 | $49,10 |
| 100 | $4.32 | $432,00 |
| 500 | $3.78 | $1.890,00 |
| 1.000 | $3.35 | $3.350,00 |
DSPIC33FJ16GP304T-I/PT Visão geral
A Digital Signal Controller is a class of microcontroller that merges deterministic interrupt-driven control peripherals with single-cycle MAC DSP engine blocks. Within Microchip's 16-bit portfolio the DSC hierarchy runs: dsPIC33F family -> 16-bit DSC -> MCU + DSP -> embedded processor. The dsPIC33F branch itself targets 3.3V designs at 40 MIPS, contrasting with the 5V dsPIC30F branch, and shares a common instruction set with the PIC24F MCU family so that existing PIC24 tools, libraries and PIMs are reused. This semantic placement explains why the part shows up in motor, power-conversion and audio applications rather than in pure signal-chain analog roles.
The DSP engine is the headline feature: a 16x16-bit single-cycle hardware multiplier combined with a 40-bit barrel shifter and 40-bit accumulators gives the DSC native DSP throughput without off-loading work to a companion DSP chip. On-chip peripherals include multiple UART, SPI, IrDA-capable UART, I2C, and LINbus interfaces for embedded connectivity; 35 digital I/O pins populate the 44-pin TQFP; and the part supports boundary-scan (JTAG) and in-circuit serial programming (ICSP) for production test.
Typical applications include brushless-DC and permanent-magnet synchronous motor control (sensored and sensorless FOC), digital power conversion (PFC, full-bridge, LLC), Class-D and Class-AB audio amplifiers, switched-mode power supply DSP loops, and sensor-fusion front ends for industrial drives. Each of these workloads benefits from deterministic interrupt latency plus the single-cycle MAC throughput that a plain MCU cannot deliver.
When designing with the dsPIC33FJ16GP304, supply it from a regulated 3.0V to 3.6V rail (typical 3.3V) and budget enough Flash endurance budget for field-upgradeable firmware. The 16 KB Flash and 2 KB RAM place this part at the entry level of the dsPIC33F lineup, so larger code bases should step up to the dsPIC33FJ32GP or dsPIC33FJ64GP family for additional headroom.
This page synthesizes distributor availability and pricing (as of 2026-09-26), drop-in same-package alternatives drawn from the same dsPIC33FJ16GP304 die, and practical design notes not consolidated in the manufacturer datasheet, offering an engineer-facing supplement to the Microchip datasheet 70290J.
Alternativas drop-in para DSPIC33FJ16GP304T-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33FJ16GP304T-I/PT (mesmo formato e footprint) — diferindo em Core Architecture, Operating Temperature, Package, RoHS Status, ADC.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33FJ16GP304-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC33FJ16GP304-E/PT
✅ Drop-In✓ Em estoque
$2.97 / unidade
Ver ficha técnica →DSPIC33FJ16GP304-H/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC33FJ16GP304T-E/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC33FJ32GP204-I/PT
✅ Drop-In✓ Em estoque
$3.78 / unidade
Ver ficha técnica →DSPIC33FJ16MC304-H/PT
✅ Drop-In✓ Em estoque
$3.72 / unidade
Ver ficha técnica →DSPIC33FJ16GP304T-I/PT Classificações máximas e características elétricas
| Core | dsPIC33F 16-bit DSC (modified Harvard) |
| Maximum CPU Speed | 40 MIPS |
| Program Memory | 16 KB Flash |
| Data Memory (RAM) | 2 KB |
| Operating Voltage (Vdd) | 3.0 V to 3.6 V |
| I/O Pins | 35 |
| Encapsulamento | 44-pin TQFP (PT) 10x10 mm |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +85C (Industrial, "I") |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| DSP Engine | 16x16-bit single-cycle hardware MAC, 40-bit barrel shifter, 40-bit accumulators |
| Programming/Debug | ICSP, JTAG boundary scan |
| Status RoHS | ROHS3 Compliant (per distributor listing) |
| Tape and Reel Suffix | T (T/R packaging variant) |
| Pitch | 0.80 mm |
Configuração de pinos do DSPIC33FJ16GP304T-I/PT
| Pino 1 | RP8/RD8 — Remappable I/O / Port D bit 8 |
| Pino 2 | RP9/RD9 — Remappable I/O / Port D bit 9 |
| Pino 3 | RP10/RD10 — Remappable I/O / Port D bit 10 |
| Pino 4 | RP11/RD11 — Remappable I/O / Port D bit 11 |
| Pino 5 | VSS — Ground reference |
| Pino 6 | OSC1/CLKI — Crystal oscillator input or external clock |
| Pino 7 | OSC2/CLKO — Crystal oscillator output or clock output |
| Pino 8 | RP0/INT0 — Remappable I/O / External interrupt 0 |
| Pino 9 | RP1/INT1 — Remappable I/O / External interrupt 1 |
| Pino 10 | RP2/INT2 — Remappable I/O / External interrupt 2 |
| Pino 11 | RP3/INT3 — Remappable I/O / External interrupt 3 |
| Pino 12 | RP4/INT4 — Remappable I/O / External interrupt 4 |
| Pino 13 | VSS — Ground reference |
| Pino 14 | VDD — Positive supply (3.0-3.6 V) |
| Pino 15 | RP5/IC1 — Remappable I/O / Input Capture 1 |
| Pino 16 | RP6/OC1 — Remappable I/O / Output Compare 1 |
| Pino 17 | RP7/OC2 — Remappable I/O / Output Compare 2 |
| Pino 18 | VDD — Positive supply (3.0-3.6 V) |
| Pino 19 | VSS — Ground reference |
| Pino 20 | RP12/RD12 — Remappable I/O / Port D bit 12 |
| Pino 21 | RP13/RD13 — Remappable I/O / Port D bit 13 |
| Pino 22 | RP14/RD14 — Remappable I/O / Port D bit 14 |
| Pino 23 | RP15/RD15 — Remappable I/O / Port D bit 15 |
| Pino 24 | RP16 — Remappable I/O |
| Pino 25 | RP17 — Remappable I/O |
| Pino 26 | RP18 — Remappable I/O |
| Pino 27 | RP19 — Remappable I/O |
| Pino 28 | RP20 — Remappable I/O |
| Pino 29 | RP21 — Remappable I/O |
| Pino 30 | RP22 — Remappable I/O |
| Pino 31 | RP23 — Remappable I/O |
| Pino 32 | RP24 — Remappable I/O |
| Pino 33 | RP25 — Remappable I/O |
| Pino 34 | MCLR — Master Clear (reset) input |
| Pino 35 | PGED1/AN0 — ICSP data / Analog input 0 |
| Pino 36 | PGEC1/AN1 — ICSP clock / Analog input 1 |
| Pino 37 | AN2/RP26 — Analog input 2 / Remappable I/O |
| Pino 38 | AN3/RP27 — Analog input 3 / Remappable I/O |
| Pino 39 | AN4/RP28 — Analog input 4 / Remappable I/O |
| Pino 40 | AN5/RP29 — Analog input 5 / Remappable I/O |
| Pino 41 | AVDD — Analog positive supply |
| Pino 42 | AVSS — Analog ground |
| Pino 43 | VDD — Positive supply (3.0-3.6 V) |
| Pino 44 | VSS — Ground reference |
Aplicações típicas
DSPIC33FJ16GP304T-I/PT é adequado para 6 aplicaçãos: Brushless DC Motor Control (BLDC / PMSM), Switched-Mode Power Supply (SMPS) Digital Control, Class-D Audio Amplifier DSP Front End, Industrial Sensor Interface & Data Acquisition, Automotive Body & Convenience Modules, Appliance Control Boards (White Goods).
Brushless DC Motor Control (BLDC / PMSM)
The DSPIC33FJ16GP304T-I/PT is a strong fit for brushless DC and permanent-magnet synchronous motor drives, because its 40 MIPS core plus single-cycle 16x16-bit MAC engine sustains field-oriented control (FOC) loops with Park/Clarke transforms at typical 10-20 kHz PWM rates. The 35 digital I/O pins expose the three-phase PWM, fault inputs, and quadrature encoder interface needed for a 3-phase inverter stage, while 16 KB Flash and 2 KB RAM fit a sensored FOC library with margin for application code. Compared with a plain PIC24F MCU running the same loop, this DSC offloads DSP steps to dedicated hardware, freeing CPU bandwidth for housekeeping and commutation state machines. Industrial-grade -40C to +85C operation matches the cabinet thermal envelope of most factory-floor and appliance drives.
Recomendado
Switched-Mode Power Supply (SMPS) Digital Control
Digital control loops in PFC, full-bridge, LLC and buck/boost converters benefit from the DSC's 40 MIPS deterministic interrupt latency and hardware MAC, because average-current-mode control and input-voltage feed-forward run inside the current-loop tick. The DSPIC33FJ16GP304T-I/PT's 16 KB Flash holds a typical 1-2 kW converter control library plus application code, while the 2 KB RAM is sufficient for state-variable storage and ripple-cancellation tables. The 44-TQFP package and 35 I/O pins expose multiple PWM outputs and high-speed ADC triggers essential for phase-shifted full-bridge topologies. The single 3.3V supply rail simplifies bootstrap design alongside a low-side gate driver such as the MCP14700 or UCC27714.
Recomendado
Class-D Audio Amplifier DSP Front End
In Class-D amplifier designs, the DSPIC33FJ16GP304T-I/PT handles volume, EQ, dynamic-range compression, and feedback-loop compensation before driving the output modulator. The 16x16-bit single-cycle MAC sustains per-sample biquad chains at 48 kHz with headroom, while 40 MIPS provides margin for LookAhead limiters and psychoacoustic filters. The 44-TQFP footprint exposes enough I/O for I2S/SPDIF input, PWM modulator outputs, and front-panel GPIO. Audio designers often pair this DSC with a dedicated Class-D gate driver and a low-noise LDO such as the MCP1700 to keep the 3.3V rail clean for the DAC reference chain.
Recomendado
Industrial Sensor Interface & Data Acquisition
Industrial multi-sensor front ends - including strain-gauge bridges, thermocouples via SPI ADC interfaces, and LINbus peripherals - fit naturally in the DSPIC33FJ16GP304T-I/PT's I/O and peripheral mix. The on-chip I2C, SPI and UART/USART (IrDA-capable) peripherals handle multi-drop sensor buses without external glue logic, and 16 KB Flash accommodates Modbus or CANopen application-layer stacks alongside DSP-style filtering. The 35 I/O pins expose GPIO for opto-isolated inputs and relay drivers. Industrial -40C to +85C operation tolerates cabinet and outdoor-embedded thermal envelopes typical of factory-floor data acquisition.
Recomendado
Automotive Body & Convenience Modules
Body and convenience ECUs such as mirror controllers, seat-position memories, HVAC blend-door actuators, and LIN-attached lighting nodes are well served by the DSPIC33FJ16GP304T-I/PT. The on-chip LINbus peripheral simplifies single-wire automotive bus connectivity without an external transceiver controller, and 35 I/O pins drive multiple brushed-DC loads via discrete half-H bridges. The DSC's 40 MIPS DSP throughput handles BLDC blower and pump control in HVAC modules. Designs that need the wider -40C to +125C AEC-Q100 envelope should step up to the DSPIC33FJ16GP304-H/PT automotive variant on the same 44-TQFP footprint.
Recomendado
Appliance Control Boards (White Goods)
White-goods control boards - washing-machine motor drives, refrigerator inverter compressors, and dishwasher pumps - rely on the DSPIC33FJ16GP304T-I/PT for variable-frequency motor control plus user-interface handling. The DSC engine runs FOC for PMSM compressors, while the UART and I2C peripherals drive LCD key panels and external EEPROM. The 44-TQFP package and industrial temperature grade are aligned with the IP54 sealed-envelope thermal reality of consumer appliances. Cost-sensitive designers often pair this DSC with a simple 3.3V LDO and a discrete IGBT half-bridge stage.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33FJ16GP304T-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33FJ16GP304-I/PT | DSPIC33FJ16GP304-E/PT | DSPIC33FJ16GP304-H/PT | DSPIC33FJ16GP304T-E/PT | DSPIC33FJ32GP204-I/PT | DSPIC33FJ16MC304-H/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin TQFP (PT) 10x10 mm | 44-pin TQFP (PT) 10x10 mm - same | 44-pin TQFP (PT) 10x10 mm - same | 44-pin TQFP (PT) 10x10 mm - same | 44-pin TQFP (PT) 10x10 mm - same | 44-pin TQFP (PT) 10x10 mm - same | 44-pin TQFP (PT) 10x10 mm - same |
| Program Memory (Flash) | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 32 KB (+100%) | 16 KB |
| Data RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 4 KB (+100%) | 2 KB |
| Maximum CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +125C (Automotive grade) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +125C (Automotive grade) |
| Packaging (Carrier) | Tape & Reel | Tube | Tube | Tube | Tape & Reel | Tube | Tube |
Principais diferenciais
- 16-bit DSC with single-cycle 16x16-bit hardware MAC at 40 MIPS (vs DSPIC33FJ32GP204-I/PT)
- Industrial -40C to +85C temperature grade at lower cost than -E variant (vs DSPIC33FJ16GP304-E/PT)
- Tape-and-reel carrier packaging for SMT production (vs DSPIC33FJ16GP304-I/PT)
- Compact 44-TQFP 10x10 mm footprint vs larger 100-pin dsPIC33F parts (vs dsPIC33FJ128GP710-I/PF)
Notas de projeto
The DSPIC33FJ16GP304T-I/PT requires a regulated 3.0 V to 3.6 V supply with a typical 3.3 V rail and peak current around 50 mA during DSP-heavy loops. Place a 10 uF bulk capacitor plus 0.1 uF decoupling on each VDD/AVDD pin pair, and keep the analog AVDD/AVSS loop tight to avoid ADC reference drift. If the upstream rail is a 5 V or 12 V bus, an MCP1700 (LDO) or MCP16331 (buck) keeps noise under control for ADC measurements.
At 40 MIPS with all peripherals enabled, the 44-TQFP package dissipates well under 200 mW, so a heatsink is unnecessary. However, sustained SPI/UART traffic in industrial enclosures can push junction temperature up by 20-30 C above ambient; keep the board within -40C to +85C ambient by ensuring at least 1 sq in of ground copper under the exposed pad footprint and adequate airflow around the TQFP body. For sealed IP54 enclosures step down MIPS or move to the -E or -H temperature variants.
Place the 8 MHz primary crystal (or resonator) within 5 mm of OSC1/OSC2, with a ground guard ring to limit EMI pickup. Route PGED1/PGEC1 (ICSP) traces as a short matched pair and avoid running PWM traces under the ICSP lines. Place a 0.1 uF decoupling cap within 3 mm of every VDD pin, with a 10 uF bulk cap on the analog AVDD rail. Reference the Microchip dsPIC33F Family Reference Manual section on PCB layout for high-current PWM outputs.
A common pitfall is configuring remappable peripherals (RP pins) without setting the appropriate PPS register lock - leaving the pin floating until firmware runs. Another is using the 16 KB Flash budget for both bootloader and application code; leave at least 2-3 KB margin or step up to the DSPIC33FJ32GP204-I/PT (32 KB Flash, same 44-TQFP package). Finally, do not skip the MCLR pull-up; if MCLR floats, the part can enter reset intermittently on noisy industrial busses.
Informações de conformidade
ROHS3 compliant per ics-embedded distributor listing. Industrial-grade part is not AEC-Q100 qualified; choose the -H/PT automotive-grade variant for AEC-Q100 deployments. REACH, halogen-free and conflict-minerals status were not provided in the verified web data.