DSPIC33FJ32MC101T-E/SO - 16-bit DSC, 32KB Flash, 16 MIPS | Microchip
N.º da peça: DSPIC33FJ32MC101T-E/SO ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.55 | $4,55 |
| 10 | $4.12 | $41,20 |
| 100 | $3.68 | $368,00 |
| 500 | $3.32 | $1.660,00 |
| 1.000 | $2.98 | $2.980,00 |
DSPIC33FJ32MC101T-E/SO Visão geral
A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes a modified Harvard architecture with DSP-engine instructions (MAC, dual operand fetch) while retaining familiar MCU peripherals, making it a common choice in the power electronics and motor control semiconductor category.
Key features include motor control PWM (MCPWM) outputs for three-phase and single-phase inverter drive, three analog comparators for fast overcurrent protection, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurements, and a real-time clock and calendar (RTCC). Communication peripherals cover I2C, SPI, UART/USART, IrDA, and LINbus, and Peripheral Pin Select (PPS) allows flexible remapping of digital I/O functions.
The DSP engine can fetch two data operands concurrently while multiplying two W registers and accumulating the result in a single cycle, according to the dsPIC33FJ16/dsPIC33FJ32 family datasheet (document 70000652f). This architecture sustains control-loop bandwidths needed for field-oriented motor control and digital power conversion without an external DSP.
Typical applications include BLDC and PMSM motor drives, switch-mode power supplies, UPS systems, automotive auxiliary control modules (the device is AEC-Q100 qualified), and industrial sensing nodes that benefit from the CTMU and RTCC peripherals.
When designing with this device, budget the 2KB RAM carefully: field-oriented control with fractional arithmetic fits, but large buffer tables do not. Use the E-grade temperature option only where the -40C to +125C range is genuinely required, since the I-grade variant is lower cost.
This page synthesizes distributor data, same-family drop-in alternatives, pricing tiers, and practical design notes not consolidated in the manufacturer datasheet.
Alternativas drop-in para DSPIC33FJ32MC101T-E/SO — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33FJ32MC101T-E/SO (mesmo formato e footprint) — diferindo em Package, Operating Temperature, Core Architecture, Peripheral Pin Select, Charge Time Measurement Unit.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33FJ32MC101-E/SO
✅ Drop-In✓ Em estoque
$3.75 / unidade
Ver ficha técnica →DSPIC33FJ32MC101T-I/SO
✅ Drop-In✓ Em estoque
$3.32 / unidade
Ver ficha técnica →DSPIC33FJ32MC101-I/SO
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.05 / unidade
Ver ficha técnica →DSPIC33FJ32MC102-I/SO
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.05 / unidade
Ver ficha técnica →DSPIC33FJ32MC101T-E/SO Classificações máximas e características elétricas
| Core Architecture | 16-bit dsPIC33F DSC (modified Harvard) |
| Max CPU Speed | 16 MIPS |
| Program Memory | 32KB (11K x 24) FLASH |
| RAM | 2KB (1K x 16) |
| Encapsulamento | 20-pin SOIC (SO), surface mount |
| Temperatura de operação | -40C to +125C (E grade) |
| Motor Control PWM | MCPWM peripheral |
| Analog Comparators | 3 |
| Charge Time Measurement Unit | CTMU |
| Real-Time Clock | RTCC |
| Communication Interfaces | I2C, SPI, UART/USART, IrDA, LINbus |
| Peripheral Pin Select | PPS (remappable I/O) |
| Qualification | AEC-Q100 qualified, automotive grade |
| Tipo de montagem | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
Guia de Configuração de Pinos do DSPIC33FJ32MC101T-E/SO 20-pin soic (so), surface mount
Configuração de pinos para DSPIC33FJ32MC101T-E/SO (pacote 20-pin soic (so), surface mount). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para DSPIC33FJ32MC101T-E/SO.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
DSPIC33FJ32MC101T-E/SO é adequado para 6 aplicaçãos: BLDC / PMSM Motor Drives, Automotive Auxiliary Control Modules, Switch-Mode Power Supplies and Digital Power, UPS and Inverter Systems, Industrial Sensing and Touch-Enabled Nodes, Embedded Control Education and Prototyping.
BLDC / PMSM Motor Drives
The DSPIC33FJ32MC101T-E/SO fits brushless DC and permanent-magnet synchronous motor control because its MCPWM peripheral generates the complementary PWM patterns an inverter stage needs, while three onboard comparators provide hardware-speed overcurrent shutdown without waiting on software. The 16 MIPS DSP engine executes single-cycle MAC instructions, sustaining field-oriented or sensorless control-loop bandwidths in a 20-pin footprint. Placed directly on the control PCB with the gate-driver ICs adjacent, the DSC reads current feedback through its analog inputs and updates PWM duty each cycle. The trade-off is the 2KB RAM, which limits advanced observer algorithms but is adequate for trapezoidal and FOC-lite schemes on small motors.
Recomendado
Automotive Auxiliary Control Modules
Because the DSPIC33FJ32MC101T-E/SO is AEC-Q100 qualified and rated -40C to +125C, it suits automotive auxiliary modules such as pump controllers, actuators, HVAC flap drives, and LIN-networked body functions. The integrated RTCC supports time-stamped logging, and the LINbus-capable UART connects directly to automotive LIN transceivers for low-cost networking. Its extended temperature rating tolerates underhood-adjacent mounting locations that standard -I grade parts cannot. Designers should still confirm the OEM-required temperature grade, since some underhood positions demand grades beyond +125C. The 20-pin SOIC keeps board area small, and Peripheral Pin Select allows one firmware platform to serve multiple module variants with different I/O mappings.
Recomendado
Switch-Mode Power Supplies and Digital Power
In digital power conversion - LLC, flyback, or buck converters with adaptive control - the DSPIC33FJ32MC101T-E/SO provides the MCPWM outputs with adjustable dead time, fast analog comparators for cycle-by-cycle current limiting, and DSP throughput for compensator computations at 16 MIPS. The CTMU can also assist in precision sensing tasks. The controller closes voltage and current loops digitally, enabling features such as soft-start scheduling and fault logging that analog controllers lack. Designers must mind RAM capacity when implementing multi-order compensators with history buffers. For higher-channel-count power supplies, Microchip's GS-series digital power DSCs extend the same toolchain to more PWM channels.
Recomendado
UPS and Inverter Systems
Uninterruptible power supplies and small inverters require synchronized PWM generation, fast fault comparators, and DSP-capable control - all present on the DSPIC33FJ32MC101T-E/SO. The MCPWM drives the inverter bridge while comparators implement hardware overcurrent trip with microsecond response, protecting MOSFETs during output shorts. The RTCC supports runtime and battery-aging accounting. The 16 MIPS DSP engine handles the sinusoidal reference generation and battery-charge control loops. With a 20-pin SOIC footprint, the controller section remains compact on crowded power boards. Firmware should reserve RAM carefully for state machines and filtering history given the 2KB data memory, prioritizing protection-critical code paths.
Recomendado
Industrial Sensing and Touch-Enabled Nodes
The Charge Time Measurement Unit on the DSPIC33FJ32MC101T-E/SO measures capacitance precisely, enabling capacitive touch interfaces and accurate sensor excitation, while the RTCC timestamps events for industrial logging nodes. Combined with I2C, SPI, and UART connectivity plus Peripheral Pin Select, the device serves as a compact sensing hub that communicates with front-end ICs and hosts alike. The -40C to +125C range suits factory-floor enclosures near heat sources. Typical deployments include capacitive-level sensors, keypad controllers, and condition-monitoring nodes. Because the CTMU measures charge time rather than requiring a dedicated touch controller, BOM cost drops, though firmware calibration routines are needed to achieve stable thresholds across temperature.
Recomendado
Embedded Control Education and Prototyping
The DSPIC33FJ32MC101T-E/SO and its tube-packaged sibling are popular for teaching DSP-based embedded control because the same 20-pin footprint is available in through-hole (DSPIC33FJ32MC101-I/P) for breadboards and in SOIC for production-like boards. Students exercise the MCPWM, comparators, ADC, and DSP MAC instructions with Microchip's free MPLAB toolchain and low-cost in-circuit debuggers. The 32KB FLASH accommodates complete lab projects including bootloader and telemetry code. The E-grade part specifically supports high-temperature lab experiments demonstrating derating behavior. Universities and training labs benefit from one family covering 16-bit MCU, DSP, and motor-control curricula without changing hardware platforms.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33FJ32MC101T-E/SO — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33FJ32MC101-E/SO | DSPIC33FJ32MC101T-I/SO | DSPIC33FJ32MC102-I/SO |
|---|---|---|---|---|
| Package | SOIC-20 | SOIC-20 - same | SOIC-20 - same | SOIC-20 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Speed | 16-bit dsPIC33F, 16 MIPS | 16-bit dsPIC33F, 16 MIPS | 16-bit dsPIC33F, 16 MIPS | 16-bit dsPIC33F, 16 MIPS |
| FLASH | 32KB (11K x 24) | 32KB (11K x 24) | 32KB (11K x 24) | 32KB (11K x 24) |
| Temperature Range | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel | Tube | Tape & Reel | Tube |
Principais diferenciais
- Extended -40C to +125C temperature range with AEC-Q100 qualification (vs DSPIC33FJ32MC101T-I/SO)
- Tape-and-reel packaging for automated assembly (vs DSPIC33FJ32MC101-E/SO)
- Full analog feature set (3 comparators + CTMU) (vs DSPIC33FJ32MC102-I/SO)
Notas de projeto
Estimated: budget a 3.0V-3.6V supply rail region (typical dsPIC33F operating window) and decouple VDD/VDDCORE per the family datasheet with low-ESR ceramics placed within 5 mm of the pins. Motor-control designs switching several amps create ground bounce; use a solid ground plane and separate the power-stage star ground from the DSC analog ground, reconnecting at a single point near the comparator/ADC reference. Verify actual VDD limits against family datasheet 70000652f before release.
The 20-SOIC footprint leaves few spare I/O, so plan Peripheral Pin Select mappings before routing. Route MCPWM outputs away from analog comparator inputs to prevent falsely tripping overcurrent latches during switching edges. Keep the CTMU input traces guarded and short if used for touch sensing. Provide ICSP programming access to MCLR, PGD, and PGC even in production boards for field firmware updates.
The 2KB RAM is the most common design wall: FOC with multiple PI compensators, sensorless observers, and communication buffers can exceed it quickly - prototype memory usage early with the MPLAB map file. Also, do not substitute the -I grade (-40C to +85C) into designs exposed above +85C; the -E grade exists for that reason. Flash self-write endurance and sector layout differ from PIC18 parts - ported bootloaders must be reviewed.
Informações de conformidade
Distributor listings identify the part as dsPIC Automotive, AEC-Q100 qualified. RoHS and lead-free status per standard Microchip catalog parts; confirm certificates via Microchip's environmental page.
