DSPIC33FJ32MC104T-I/ML - 16-bit DSC, 16 MIPS, 32KB Flash | Microchip
N.º da peça: DSPIC33FJ32MC104T-I/ML ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.62 | $4,62 |
| 10 | $4.18 | $41,80 |
| 100 | $3.74 | $374,00 |
| 500 | $3.42 | $1.710,00 |
| 1.000 | $3.1 | $3.100,00 |
DSPIC33FJ32MC104T-I/ML Visão geral
A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the standard choice for closed-loop motor control, digital power conversion, and sensor fusion tasks that require fast multiply-accumulate operations alongside real-time PWM generation.
Key features include motor control PWM (MCPWM) modules with independent timebases, the Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing, and Peripheral Pin Select (PPS) that allows digital peripherals to be remapped to available pins - a major advantage in the low-pin-count 44-QFN footprint. Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus, matching automotive and industrial networking needs.
Architecturally, the dsPIC33F core uses a modified Harvard pipeline with DSP instruction support (MAC, DSP multiply) and two 40-bit accumulators, sustaining full 16 MIPS throughput across the industrial temperature range. Internal flash is self-programmable, and an on-chip regulator stabilizes the 3.3V core supply via a single external VCAP capacitor (4.7uF to 10uF, low-ESR, per the Microchip datasheet 70000652f).
Typical applications include BLDC and PMSM motor control, digital power supplies (PFC, LLC), UPS systems, and capacitive-sensing user interfaces where CTMU and PPS reduce external component count.
Design consideration: always reserve PCB area near the VCAP pin for the required low-ESR capacitor, and never connect VCAP to VDD - a frequent bring-up failure point.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para DSPIC33FJ32MC104T-I/ML — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33FJ32MC104T-I/ML (mesmo formato e footprint) — diferindo em Operating Temperature, Package, Analog Comparators, Core, Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33FJ32MC104T-E/ML
✅ Drop-In✓ Em estoque
$3.51 / unidade
Ver ficha técnica →DSPIC33FJ32GP304-I/ML
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.49 / unidade
Ver ficha técnica →DSPIC33FJ64MC104-I/ML
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DSPIC33FJ32MC204-I/ML
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.37 / unidade
Ver ficha técnica →DSPIC33FJ16MC304-I/ML
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DSPIC33FJ32MC104T-I/ML Classificações máximas e características elétricas
| Core | dsPIC33F, 16-bit |
| Max CPU Speed | 16 MIPS |
| Program Memory | 32KB (11K x 24) FLASH |
| RAM | 2KB |
| Tensão de alimentação | 3.3 V |
| Temperatura de operação | -40C to +85C (I grade) |
| Encapsulamento | 44-QFN (8x8 mm) with exposed pad |
| Tipo de montagem | Surface Mount |
| PWM | Motor Control PWM (MCPWM) modules |
| CTMU | Yes (Charge Time Measurement Unit) |
| Peripheral Pin Select (PPS) | Yes |
| Communication Interfaces | I2C, SPI, UART/USART, IrDA, LINbus |
| Series | dsPIC33FJ32MC Motor Control Family |
| Packaging | Tape & Reel (T suffix) |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do DSPIC33FJ32MC104T-I/ML 44-qfn (8x8 mm) with exposed pad
Configuração de pinos para DSPIC33FJ32MC104T-I/ML (pacote 44-qfn (8x8 mm) with exposed pad). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para DSPIC33FJ32MC104T-I/ML.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
DSPIC33FJ32MC104T-I/ML é adequado para 6 aplicaçãos: BLDC/PMSM Motor Control, Digital Power Conversion, Capacitive Touch Interfaces, Industrial Automation Nodes, Uninterruptible Power Supplies (UPS), Automotive-adjacent LIN Networks.
BLDC/PMSM Motor Control
The DSPIC33FJ32MC104T-I/ML is purpose-built for three-phase BLDC and PMSM control: its MC-family MCPWM modules generate complementary PWM pairs with hardware dead-time insertion, while the 16 MIPS DSP core with dual 40-bit accumulators executes field-oriented control (FOC) current loops at switching frequencies well above the audible range. In a typical inverter, the DSC reads phase currents through its ADC, computes the FOC transforms, and updates PWM duty cycles within one switching period. Using the 44-QFN 8x8 mm package keeps the controller next to the gate drivers on compact driver boards. Peripheral Pin Select allows UART or LIN pins to be repositioned to avoid conflicts with PWM outputs, a real constraint at 44 pins.
Recomendado
Digital Power Conversion
In switch-mode power supplies (PFC, LLC, buck stages), the DSPIC33FJ32MC104T-I/ML provides deterministic PWM with fast ADC-triggered loop updates, enabling voltage-mode or average-current-mode control at hundreds of kHz. The 16-bit core sustains the multiply-accumulate burden of digital compensators (PI/II filters) at 16 MIPS without floating-point overhead. CTMU can timestamp events for power metering auxiliary functions, and PPS frees pins for I2C PMBus-style housekeeping in compact 44-QFN layouts. Designers should budget the VCAP capacitor (4.7uF-10uF low-ESR per datasheet 70000652f) close to the pin to guarantee regulator stability in noisy power stages.
Recomendado
Capacitive Touch Interfaces
The integrated Charge Time Measurement Unit (CTMU) makes the DSPIC33FJ32MC104T-I/ML a strong fit for capacitive touch keys, sliders, and proximity sensing in appliance and industrial HMI panels. The CTMU's constant-current source and precision timing measure charge transfer on sensor pads without external analog components, and the 16 MIPS core runs debounce and threshold algorithms in the background. With Peripheral Pin Select, touch channels, UART, and PWM for haptic or LED feedback can all coexist on the 44-QFN 8x8 mm footprint. The 2KB RAM comfortably holds multi-channel baseline-tracking state machines while leaving headroom for the main application.
Recomendado
Industrial Automation Nodes
As a factory-floor control node, the DSPIC33FJ32MC104T-I/ML combines I2C, SPI, and UART/USART with IrDA and LINbus support, letting one 44-QFN device bridge sensor buses to actuator PWM outputs. The -40C to +85C industrial grade covers cabinet and machinery environments, and the 32KB self-programmable FLASH supports field firmware updates over LIN or UART bootloaders. PPS is especially valuable here: pin functions can be remapped per product variant without respinning the PCB. For higher-density motion or network-heavy nodes, the same-family DSPIC33FJ256MC510 offers a migration path with identical dsPIC33F toolchain compatibility in MPLAB X.
Recomendado
Uninterruptible Power Supplies (UPS)
UPS systems need simultaneous inverter PWM generation, battery-charging control, and AC-line synchronization - exactly the mix the DSPIC33FJ32MC104T-I/ML delivers with its MCPWM modules and 16-bit DSP core. The 16 MIPS throughput handles the PI loops for output-voltage regulation while a second loop tracks the utility zero-crossing for transfer logic. CTMU-based timing can supplement crystal-less timebase checks, and LIN/UART links report status to a host controller. Designers should keep the VCAP capacitor and decoupling tight around the QFN to survive the electrically noisy inverter environment, and leverage the exposed pad as a solid ground connection.
Recomendado
Automotive-adjacent LIN Networks
The DSPIC33FJ32MC104T-I/ML's LINbus and IrDA-capable UART, plus 3.3V operation, suit body-control and actuator modules that communicate over LIN while driving motors or lamps via MCPWM. Although this exact -I grade part is not AEC-Q100 qualified, it serves non-safety automotive-adjacent equipment, agricultural retrofits, and off-highway accessories where the 44-QFN footprint and PPS flexibility reduce board cost. The 16 MIPS core handles LIN 2.x scheduling plus control loops concurrently, and the 32KB FLASH accommodates protocol stacks with room for diagnostics. Designers needing full automotive qualification should evaluate the automotive-qualified dsPIC33 variants in Microchip's portfolio.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33FJ32MC104T-I/ML — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33FJ32MC104T-E/ML | DSPIC33FJ32GP304-I/ML | DSPIC33FJ64MC104-I/ML | DSPIC33FJ16MC304-I/ML |
|---|---|---|---|---|---|
| Package | 44-QFN (8x8) ML | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Program Flash | 32KB (11K x 24) | 32KB | 32KB | 64KB | 16KB |
| Motor Control PWM | Yes (MCPWM) | Yes (MCPWM) | No (GP family) | Yes (MCPWM) | Yes (MCPWM) |
| Temperature Range | -40C to +85C (I) | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| PPS (Peripheral Pin Select) | Yes | Yes | Yes | Yes | Yes |
Principais diferenciais
- Dedicated motor control PWM with hardware dead-time (vs DSPIC33FJ32GP304-I/ML)
- Extended temperature drop-in option (vs DSPIC33FJ32MC104T-E/ML)
- In-place firmware memory upgrade (vs DSPIC33FJ64MC104-I/ML)
Notas de projeto
The dsPIC33FJ32MC104 embeds an internal 2.5V-class core regulator fed from the 3.3V VDD rail. Per Microchip datasheet 70000652f, the VCAP pin requires a low-ESR capacitor (ESR under 5 ohms) between 4.7uF and 10uF rated 16V to ground, and must never be tied to VDD. Place this capacitor within a few millimeters of the pin with a solid via to the ground plane. Omitting it, using a high-ESR part, or misrouting VCAP to VDD causes brown-out resets or complete failure to start.
The 44-QFN 8x8 mm exposed pad is the primary ground and thermal path. Solder the pad to a grounded copper pour with a 3x3 (or larger) via array to the internal ground plane - relying on perimeter pins alone increases ground bounce, which degrades ADC accuracy and PWM edge quality in motor-drive environments. Keep the analog AVDD supply filtered (ferrite + 100nF + 10uF) and route current-sense signals differentially away from PWM switching loops.
Peripheral Pin Select (PPS) is powerful but error-prone: remapping a peripheral to a pin already assigned to another function silently produces contention. Follow the Microchip PPS locking scheme - configure all RPINR/RPOR registers before unlocking IOLOCK, then lock. Also note the T suffix indicates tape-and-reel; moisture sensitivity of QFN packages requires proper MSL bake/handling per the reel label before reflow to avoid popcorn cracking.
Informações de conformidade
RoHS compliant per Microchip standard dsPIC33F production parts. Not an AEC-Q100 qualified automotive part; -I grade is industrial (-40C to +85C).
