Silicon Labs

EFM32G222F128-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

N.º da peça: EFM32G222F128-QFP48 ✓ Ativo
1.98 V to 3.8 V Vdss 48-TQFP (7 x 7 mm) Package 32 MHz Speed 128 kB (128K x 8) Memory
MOQ: 1 |

EFM32G222F128-QFP48 Visão geral

The Silicon Labs EFM32G222F128-QFP48 is a 32-bit ARM Cortex-M3 Gecko microcontroller operating up to 32 MHz, with 128 kB of Flash memory, 16 kB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. Its 1.98 V to 3.8 V operating supply range and AES-capable design suit compact, energy-sensitive embedded systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. Within the embedded-control hierarchy, an MCU executes firmware, samples sensors, controls actuators, and manages communications. The EFM32G222F128-QFP48 belongs to Silicon Labs' EFM32 Gecko family, combining an ARM Cortex-M3 processor with a low-power platform designed for fast wake-up operation and energy-saving modes.

Principal device features include a 32 MHz maximum clock, 128 kB Flash for firmware, 16 kB SRAM for working data, and 37 digital I/O pins. The device also provides three 16-bit timers and AES hardware capability. These resources support event timing, motor or actuator control, secure data handling, and low-power sensor processing without requiring a separate external memory interface for typical firmware sizes.

The EFM32G222F128-QFP48 combines a 1.98 V minimum and 3.8 V maximum supply operating range with a 32-bit Cortex-M3 core. Its Gecko low-energy architecture supports energy-sensitive products where average power, sleep current, and wake-up behavior influence battery life. Designers should account for decoupling, debug access, firmware size, peripheral sharing, and the available 37 digital I/O pins when allocating board resources.

Typical uses include connected environmental sensors, compact industrial monitors, wearable accessories, building-control nodes, and low-power embedded instruments. The device is particularly suitable when local computation, deterministic timer resources, and modest communications requirements are needed. The 48-pin TQFP package also exposes more I/O than smaller dual in-line packages while remaining suitable for conventional surface-mount assembly.

For a new board, follow the pin-description table in the Silicon Labs manufacturer datasheet when assigning signals, and preserve the documented debug and power pins. Place the required input, output, and decoupling capacitors close to their associated supply pins, keep switching and sensitive analog traces separated, and verify the chosen regulator can meet both load-transient and low-current sleep requirements.

This page organizes the EFM32G222F128-QFP48 specifications, practical application guidance, verified source links, and pin-compatible Silicon Labs variants. It also highlights the memory, temperature-grade, and packaging considerations that engineers should check before approving a drop-in replacement for an existing 48-TQFP design.

Alternativas drop-in para EFM32G222F128-QFP48 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

EFM32G222F128G-QFP48

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-TQFP (7 x 7 mm)
Later G revision; retains 32 MHz core, 128 kB Flash, 16 kB RAM, 37 I/O, and 48-TQFP footprint

📋 Alternativa de referência (fora do catálogo)

EFM32G222F128G-E-QFP48

✅ Drop-In
📦 48-TQFP (7 x 7 mm)
Later G revision with E ordering suffix; retains 32 MHz core, 128 kB Flash, 16 kB RAM, and 48-TQFP footprint

📋 Alternativa de referência (fora do catálogo)

EFM32G222F128-QFP48 Classificações máximas e características elétricas

Processor Core ARM Cortex-M3
Architecture 32-bit
Frequência máxima de clock 32 MHz
Flash Memory 128 kB (128K x 8)
RAM 16 kB
Digital I/O Pins 37
Timer Count 3
Timer Resolution 16-bit
Supply Voltage Range 1.98 V to 3.8 V
Security Capability AES hardware accelerator
Series EFM32 Gecko
Encapsulamento 48-TQFP (7 x 7 mm)
Tipo de montagem Surface Mount

Guia de Configuração de Pinos do EFM32G222F128-QFP48 48-tqfp (7 x 7 mm)

Configuração de pinos para EFM32G222F128-QFP48 (pacote 48-tqfp (7 x 7 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 48-tqfp (7 x 7 mm) para EFM32G222F128-QFP48

Nenhum dado detalhado de pinagem disponível para EFM32G222F128-QFP48.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

EFM32G222F128-QFP48 é adequado para 6 aplicaçãos: Connected Environmental Sensor Nodes, Compact Industrial Monitoring, Battery-Powered Wearable Accessories, Building Control Endpoints, Actuator and Motor Control, Low-Power Security and Access Peripherals.

🧩

Connected Environmental Sensor Nodes

The EFM32G222F128-QFP48 fits connected environmental sensors because its 32 MHz Cortex-M3 core can perform local filtering, threshold handling, and sensor compensation while its low-energy Gecko architecture supports energy-saving operation. The 128 kB Flash accommodates application firmware and configuration data, while 16 kB RAM provides workspace for sampling and communications buffers. Three 16-bit timers support periodic sampling and sensor timing. A design can use 37 digital I/O pins for sensor enables, interrupt inputs, status indicators, and digital communication signaling. The main power-system consideration is matching the regulator and radio average current to the target battery life rather than relying only on MCU active current.

🏭

Compact Industrial Monitoring

The EFM32G222F128-QFP48 is suitable for compact industrial monitors that combine periodic sensor acquisition with local alarms and communications. Its 32-bit Cortex-M3 processor runs at up to 32 MHz, providing enough performance for data conditioning without requiring a high-power application processor, while three 16-bit timers support acquisition intervals, debounce timing, and motor or relay timing. The 1.98 V to 3.8 V operating range allows integration with a 3.3 V regulated rail. Before deployment, verify the selected device temperature grade, isolation needs, surge exposure, grounding strategy, and enclosure temperature so that the MCU is not selected outside its intended operating conditions.

📱

Battery-Powered Wearable Accessories

The EFM32G222F128-QFP48 can serve as the central controller in a battery-powered wearable accessory that must balance fast response with low standby consumption. The Gecko low-energy platform includes energy-saving modes and fast wake-up behavior, allowing the device to remain asleep between user interactions or sensor events. Its 128 kB Flash and 16 kB RAM are sufficient for compact control firmware and short data buffers, while the AES accelerator supports hardware-assisted protection for sensitive data paths. Board-level leakage, radio duty cycle, sensor standby current, and regulator quiescent current can dominate battery life, so engineers should calculate the complete power budget rather than the processor figure alone.

🏠

Building Control Endpoints

The EFM32G222F128-QFP48 is well suited to building-control endpoints that monitor switches, occupancy sensors, valves, or localized environmental conditions. Its 37 digital I/O pins provide substantial peripheral connectivity, while the three 16-bit timers help implement periodic sensing, communication scheduling, and actuator timing. The MCU operates from a 1.98 V to 3.8 V supply, enabling use of a regulated 3.3 V rail when appropriate. For a connected building product, use low-leakage external components, provide local decoupling, and isolate long wiring from sensitive signal paths. The exact temperature range and industrial qualification status should be checked before deployment in mechanically harsh or extreme-temperature locations.

⚡

Actuator and Motor Control

The EFM32G222F128-QFP48 can control compact actuator or motor systems where deterministic timing, local logic, and a small memory footprint are important. Three 16-bit timers provide resources for pulse-width modulation, input capture, periodic control loops, and timing protection functions, while the 32 MHz Cortex-M3 core can execute motion algorithms and manage interlocks. The 37 available digital I/O pins support position sensors, limit switches, driver enables, fault signals, and communications. Designers should budget pin multiplexing carefully, use suitable transistor or motor-driver interfaces, and account for switching transients and back-EMI coupling so that the MCU and its low-noise supply rail are not exposed to inductive spikes.

🔒

Low-Power Security and Access Peripherals

The EFM32G222F128-QFP48 fits access-control peripherals, credential readers, and compact security modules that combine local decision logic with a hardware AES accelerator. The 128 kB Flash can hold firmware, key-handling code, and device configuration, while 16 kB RAM supports protocol parsing and temporary data processing. Its low-energy platform permits the controller to remain inactive between credentials or external events and respond through its fast wake-up behavior. Security implementations should still use secure boot, protected key storage, controlled debug access, and firmware update procedures according to the manufacturer guidance. Supply filtering and physical enclosure design also matter when cryptographic processing and external interfaces share a compact board.

Resumo dos produtos recomendados

EFM32G222F128-QFP48 Silicon Labs Usado em: Connected Environmental Sensor Nodes, Compact Industrial Monitoring, Battery-Powered Wearable Accessories, Building Control Endpoints, Actuator and Motor Control, Low-Power Security and Access Peripherals EFM32G222F128G-E-QFP48 Revision-compatible sensor-node controller Usado em: Connected Environmental Sensor Nodes, Battery-Powered Wearable Accessories, Actuator and Motor Control, Low-Power Security and Access Peripherals EFM32G222F128G-QFP48 Revision-compatible monitoring controller Usado em: Compact Industrial Monitoring, Building Control Endpoints
What is the EFM32G222F128-QFP48?
The EFM32G222F128-QFP48 is a Silicon Labs 32-bit ARM Cortex-M3 Gecko microcontroller rated up to 32 MHz, with 128 kB of Flash, 16 kB of RAM, and 37 digital I/O pins. According to the Silicon Labs manufacturer datasheet and product page, it combines a 1.98 V to 3.8 V supply range, three 16-bit timers, AES hardware capability, and a low-energy architecture in a 48-TQFP package.
What are the key specifications of EFM32G222F128-QFP48?
The EFM32G222F128-QFP48 provides a 32 MHz ARM Cortex-M3 core, 128 kB of Flash, 16 kB of RAM, 37 digital I/O pins, and three 16-bit timers. According to the Silicon Labs manufacturer product page, the device also includes AES hardware capability and operates from 1.98 V to 3.8 V. Its 48-TQFP package is 7 x 7 mm and uses surface-mount assembly.
Where can I download the EFM32G222F128-QFP48 datasheet PDF?
The EFM32G222F128-QFP48 documentation can be reached through the Silicon Labs manufacturer product page listed on this page. That page links the device specifications and technical documentation, while the EFM32G family reference material explains registers and peripherals. Use the document selector to download the current family datasheet, reference manual, errata, and applicable hardware design guidance.
Where can I find the EFM32G222F128-QFP48 pinout?
The EFM32G222F128-QFP48 pin assignment is defined in the Silicon Labs manufacturer datasheet's 48-TQFP pin-description and package-drawing sections. Use that table when routing PCB signals, programming the debug interface, and identifying power, ground, reset, and peripheral pins. The device is supplied in a 48-pin TQFP package, so the pinout must not be inferred from a smaller package variant.
Can EFM32G222F128-QFP48 be used in low-power battery applications?
Yes, the EFM32G222F128-QFP48 is designed for energy-sensitive embedded applications using its EFM32 Gecko low-power platform, fast wake-up behavior, and energy-saving modes. According to the Silicon Labs manufacturer product page, its 32 MHz Cortex-M3 core provides local processing without requiring a separate external processor. Battery-life calculations should still include radio, sensor, regulator, and board-leakage consumption.
What supply voltage does EFM32G222F128-QFP48 require?
The EFM32G222F128-QFP48 operates from 1.98 V to 3.8 V, as stated in the Silicon Labs device specifications. This range permits operation from regulated 2 V, 2.5 V, 3 V, or 3.3 V rails when the selected regulator meets transient and sequencing requirements. Keep the PCB layout within the decoupling recommendations in the manufacturer datasheet.
What can replace the EFM32G222F128-QFP48?
The closest supported replacement is the Silicon Labs EFM32G222F128G-QFP48, while the EFM32G222F128G-E-QFP48 offers the revision-G family designation with an E temperature/package option. Both use the same 48-TQFP package family as the EFM32G222F128-QFP48. Confirm the exact temperature range, pin functions, errata, and firmware support before replacing an assembled design.
Is EFM32G222F128G-E-QFP48 the same as EFM32G222F128-QFP48?
The EFM32G222F128G-E-QFP48 belongs to the same EFM32G222F128 device and 48-TQFP family as the EFM32G222F128-QFP48. Its G designation identifies a later device revision, while the E suffix carries additional ordering significance. Silicon Labs states in product-revision document 170724110 that revision E includes pin-compatible replacements for earlier revision devices.
When should I choose EFM32G222F128-QFP48 over EFM32TG822F32-QFP48?
Choose the EFM32G222F128-QFP48 when the design needs 128 kB of Flash, 16 kB of RAM, a 32 MHz Cortex-M3 core, and three 16-bit timers. The comparison listing for EFM32TG822F32-QFP48 indicates a separate 32 kB Flash-oriented ordering, so it may require different memory planning. A true PCB replacement should only proceed after the complete pin and memory comparison is verified.
Is EFM32G222F128-QFP48 suitable for industrial sensor nodes?
The EFM32G222F128-QFP48 fits compact industrial sensor nodes that require local processing, multiple timers, and low-power operation. Its 37 digital I/O pins and three 16-bit timers support sensor acquisition, actuator timing, status signaling, and periodic sampling. For a deployed system, verify the exact temperature grade, isolation requirements, EMC design, and regulator behavior against the enclosure and industrial environment.
What is the best drop-in replacement for EFM32G222F128-QFP48?
The best supported same-family drop-in candidate is the Silicon Labs EFM32G222F128G-QFP48 because it retains the EFM32G222F128 device configuration and 48-TQFP footprint. The EFM32G222F128G-E-QFP48 is another same-family option with different revision and ordering suffixes. Check the manufacturer pin table and revision errata before substitution, especially if the original PCB uses early-revision behavior.
How do I choose between EFM32G222F128-QFP48 and EFM32G222F128G-QFP48?
Choose EFM32G222F128-QFP48 when it matches the original production BOM and approved device revision. Choose EFM32G222F128G-QFP48 when moving to the later G revision while retaining the same 128 kB Flash, 16 kB RAM, 32 MHz core, and 48-TQFP platform. Silicon Labs documents revision E as introducing pin-compatible replacements for earlier devices.
Where can I buy EFM32G222F128-QFP48 online?
Use the Request a Quote form on this page to request EFM32G222F128-QFP48 pricing, stock confirmation, minimum order quantity, and current lead time. The verified distributor listings confirm market availability for the exact device and its 48-TQFP configuration. A written quotation is preferable for production planning because component availability and schedule can change rapidly.
What is the price of EFM32G222F128-QFP48?
The current EFM32G222F128-QFP48 price depends on order quantity, date, and requested delivery schedule. Use the Request a Quote form on this page with your quantity, target date, and packaging requirement to receive a current quotation. The manufacturer product page identifies the exact MPN and its 48-TQFP configuration, helping the quotation match the intended device revision.
What is the lead time for EFM32G222F128-QFP48?
Request the current EFM32G222F128-QFP48 lead time through the Request a Quote form on this page. Include your annual usage, prototype or production quantity, requested delivery date, and approved alternate strategy. This allows the supplier to confirm the appropriate device revision, package code, stock position, and manufacturing schedule without assuming that a distributor listing represents guaranteed availability.

Dados de referência de engenharia para EFM32G222F128-QFP48 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the EFM32G222F128-QFP48 for a new or continuing design that specifically calls for the original EFM32G222F128 ordering, a 32 MHz ARM Cortex-M3 core, 128 kB Flash, 16 kB RAM, and three 16-bit timers. It is appropriate for energy-sensitive sensor nodes, compact industrial monitors, wearable accessories, and small control products operating from 1.98 V to 3.8 V. Select EFM32G222F128G-QFP48 when moving an approved design to the later G device revision while preserving the same 48-TQFP platform. Use EFM32G222F128G-E-QFP48 when the E ordering suffix is required by the intended temperature or purchasing configuration. Before replacing an installed MCU, check the exact pin table, errata, temperature limits, debug behavior, and packaging details. Do not select a merely similar cross-brand MCU on clock speed and package dimensions alone, because peripheral muxing, power pins, firmware support, and interrupt assignments must also remain compatible.

Comparação com alternativas

Parâmetro Este produto EFM32G222F128G-QFP48 EFM32G222F128G-E-QFP48
Brand Silicon Labs Silicon Labs Silicon Labs
Package 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm) - same package family 48-TQFP (7 x 7 mm) - same package family
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz
Flash Memory 128 kB 128 kB 128 kB
RAM 16 kB 16 kB 16 kB
Digital I/O Pins 37 37 37
Supply Voltage Range 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V
Security Capability AES hardware accelerator AES hardware accelerator AES hardware accelerator
Timer Resources 3 x 16-bit timers 3 x 16-bit timers 3 x 16-bit timers
Device Revision Earlier EFM32G222F128 ordering G revision G revision with E ordering suffix

Principais diferenciais

  • Substantial embedded memory for compact control products (vs EFM32TG822F32-QFP48)
  • Direct same-family revision compatibility (vs EFM32G222F128G-E-QFP48)
  • Peripheral density in a standard surface-mount package (vs EFM32G222F128G-QFP48)

Notas de projeto

Design the 1.98 V to 3.8 V supply rail to support both average load and fast wake-up transitions. Place the input and bulk capacitors at the locations specified by the manufacturer reference design, with a short return path to the device ground pins. Select a regulator whose quiescent current, dropout behavior, and load-transient response fit the intended sleep and active-current budget; MCU efficiency cannot compensate for excessive board leakage or an undersized supply.

Route the 48-TQFP device according to the Silicon Labs package drawing and keep switching-node or high-current traces away from the MCU supply and signal pins. Use a continuous ground plane where practical, minimize loops around decoupling capacitors, and assign sensitive inputs to electrically quiet pins. Confirm every peripheral pin mux before final routing because alternate functions can constrain simultaneous sensor, timer, and communication assignments.

Do not assume that every similarly named EFM32G222 orderable device has identical temperature, revision, or errata status. Review the pin-description table, product-revision document 170724110, and current errata for the specific suffix. After substituting a later revision, repeat device initialization, debug-interface, oscillator, brownout, and low-power wake-up tests because firmware should not rely on undocumented behavior between revisions.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The verified product information confirms the device identity, package, memory, processor, voltage range, timer count, and AES capability, but it does not state the requested environmental or material-compliance statuses. The E suffix is retained as part of the manufacturer ordering designation without assigning an unsupported compliance meaning.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

EFM32G222F128-QFP48 datasheet EFM32G222F128-QFP48 specifications EFM32G222F128-QFP48 pinout EFM32G222F128-QFP48 datasheet pdf EFM32G222F128-QFP48 equivalent EFM32G222F128-QFP48 replacement EFM32G222F128-QFP48 cross reference EFM32G222F128-QFP48 48-TQFP EFM32G222F128-QFP48 price EFM32G222F128-QFP48 stock Silicon Labs EFM32G222F128-QFP48 EFM32G222F128-QFP48 low power application EFM32G222F128-QFP48 vs EFM32G222F128G-QFP48

Componentes & termos relacionados

Silicon Labs EFM32G222F128-QFP48 EFM32G222F128G-QFP48 EFM32G222F128G-E-QFP48 EFM32TG822F32-QFP48 EFM32 Gecko ARM Cortex-M3 32-bit microcontroller MCU embedded microcontroller semiconductor 128 kB Flash 16 kB RAM 32 MHz AES accelerator 16-bit timer digital I/O 48-TQFP TQFP family surface mount SMD low-power platform energy-saving modes fast wake-up 1.98 V to 3.8 V
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ