Intel

EP1K100QC208-2NGZ - ACEX-1K 100K Gates FPGA, 147 I/O, 208-PQFP | Intel / Altera

N.º da peça: EP1K100QC208-2NGZ ✗ Fim de vida

Em estoque Enviado em 1 a 3 dias úteis

2.375 V to 2.625 V Vdss 208-BFQFP (208-PQFP, Plastic Quad Flat Pack) Package -2 (medium speed) Speed

A partir de $71 USD / unidade

MOQ: 1 |

Preço atualizado: 2026-09-06

Preços por volume

Qtd.	Preço unitário	Total
1	$95	$95,00
10	$88.5	$885,00
100	$82	$8.200,00
250	$76.5	$19.125,00
500	$71	$35.500,00

ℹ️ Todos os preços estão em USD

Ver datasheet (PDF) Ver alternativas

Quantidade

EP1K100QC208-2NGZ Visão geral

The Intel / Altera EP1K100QC208-2NGZ is a member of the legacy ACEX-1K family of Field Programmable Gate Arrays (FPGAs), delivering 100,000 typical gates and 4,992 logic elements in a 208-pin Plastic Quad Flat Pack (208-BFQFP / 208-PQFP) surface-mount package. The device integrates 624 Logic Array Blocks (LABs) / Configurable Logic Blocks (CLBs), 49,152 bits of embedded SRAM, 147 user I/O pins, and operates from a 2.375V to 2.625V core supply with a commercial 0°C to 70°C temperature grade.

What is an FPGA? A Field Programmable Gate Array is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs/LABs) connected by a programmable interconnect matrix. Unlike an ASIC (Application-Specific Integrated Circuit), an FPGA can be reconfigured in the field after manufacturing, making it ideal for prototyping, low-volume production, glue logic, and applications where design changes are expected. Within the FPGA taxonomy, the EP1K100 sits at the lower-density end: CPLD -> low-density FPGA -> ACEX-1K -> high-density FPGA -> SoC FPGA.

Key specifications include a 2.5V core supply with 5V-tolerant I/O, in-system programmability via the Altera ByteBlaster or BitBlaster configuration interface, and JTAG boundary-scan support. The 'QC208' package code denotes the 208-pin Plastic QFP, the '-2' speed grade indicates the medium-speed tier, and the 'NGZ' suffix indicates the lead-free, RoHS-compliant commercial processing variant.

The EP1K100QC208-2NGZ uses a SRAM-based Look-Up Table (LUT) architecture with four-input LUTs per logic element, and a hierarchical interconnect structure with FastTrack routing. The embedded array blocks (EABs) provide dedicated dual-port RAM resources that are widely used for FIFO buffers and small register files. Configuration data is loaded from an external serial or parallel PROM at power-up, since the SRAM cells are volatile.

Typical applications include digital signal processing front-ends, industrial control glue logic, telecommunications line-card interfaces, PCI bridge controllers, and legacy embedded systems where the ACEX-1K has been a long-standing design-in. The 147 user I/Os are sufficient to drive multiple 16/32-bit buses and external memory interfaces in cost-sensitive designs.

When designing with this device, ensure that configuration memory (typically an EPC2 or EPC16) is included in the BOM, since the EP1K100 has no on-chip non-volatile configuration storage. Decoupling must follow the ACEX-1K Hardware Reference Manual guidelines: 0.1µF + 10µF near each VCCINT pin group. Note that ACEX-1K is now in legacy/discontinued status, so designers should evaluate Cyclone or Cyclone II for new designs.

This page synthesizes distributor stock levels, drop-in same-package ACEX-1K alternatives, and practical design notes not found in the original manufacturer datasheet.

Alternativas drop-in para EP1K100QC208-2NGZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com EP1K100QC208-2NGZ (mesmo formato e footprint) — diferindo em Family, Speed Grade, Total RAM Bits, Process Technology, Core Supply Voltage.

EP1K100QC208-1

Altera

Family: ACEX-1K

Speed Grade: -1

Process Technology: 0.22 µm