EP20K100CQ208C9 - APEX 20K FPGA, 100K Gates, 4160 LE, 208-QFP
N.º da peça: EP20K100CQ208C9 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $42.5 | $42,50 |
| 10 | $38.2 | $382,00 |
| 100 | $33.85 | $3.385,00 |
| 500 | $29.4 | $14.700,00 |
| 1.000 | $25.1 | $25.100,00 |
EP20K100CQ208C9 Visão geral
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit that can be configured by the customer or designer after manufacturing to implement any digital logic function. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) -> complex programmable logic devices (CPLDs) -> FPGAs -> SoC FPGAs, and are widely used as alternatives to application-specific integrated circuits (ASICs) for prototyping, low-volume production, and high-performance parallel processing tasks such as DSP, communications, and custom compute accelerators.
Key features of the EP20K100CQ208C9 include 4,160 logic elements, 26 embedded system blocks (ESBs) delivering 53,248 RAM bits, four PLLs for clock management, and a maximum of 159 user I/O. The device operates across commercial 0 to 70 C temperature range (the C9 speed grade) and supports in-system programmability via the IEEE 1149.1 JTAG interface and the Altera Passive Serial configuration scheme. The APEX 20K architecture combines look-up table (LUT) logic with embedded memory, enabling designers to integrate glue logic, FIFOs, and small register files on a single device.
Architecturally, the EP20K100CQ208C9 uses a MultiCore architecture introduced by Altera in 1999, distributing MegaLAB structures across the die and providing dedicated high-speed interconnect (FastTrack) for predictable timing. The four PLLs support clock multiplication, division, phase shifting, and frequency synthesis, simplifying board-level clock tree design for synchronous logic and source-synchronous interfaces.
Typical applications for the EP20K100CQ208C9 include telecommunications line cards, custom peripheral controllers for industrial automation, glue logic replacement for legacy ASICs, prototype validation of ASIC designs, PCI bridge implementations, and digital signal processing front-ends. The 208-pin PQFP package is well-suited for through-hole and socketed designs where rework and field replacement are valued over board density.
When designing with the EP20K100CQ208C9, engineers should use the Altera Quartus II (legacy) or MAX+PLUS II development environment for synthesis, place-and-route, and timing analysis. Configuration data must be loaded from a serial EEPROM or downloaded via JTAG; ensure your board supports the Passive Serial configuration mode and provides proper MSEL pin strapping for the chosen mode.
This page synthesizes distributor stock levels, drop-in same-package alternatives from the APEX 20K family, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate the EP20K100CQ208C9 against modern FPGA alternatives.
Alternativas drop-in para EP20K100CQ208C9 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EP20K100CQ208C9 (mesmo formato e footprint) — diferindo em Speed Grade, Package, Operating Temperature, Family, Process Technology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EP20K100CQ208C8ES
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →EP20K100CQ208C8
✅ Drop-In✓ Em estoque
$13.4 / unidade
Ver ficha técnica →EP20K100CQ208C7ES
✅ Drop-In✓ Em estoque
$48 / unidade
Ver ficha técnica →EP20K100CQ208C7
✅ Drop-In✓ Em estoque
$22.4 / unidade
Ver ficha técnica →EP20K100CQ208C9 Classificações máximas e características elétricas
| Series | APEX 20K |
| Family Name | APEX 20K |
| Number of Logic Elements | 4,160 |
| Typical Gates | 100,000 |
| Maximum User I/O | 159 |
| Total RAM Bits | 53,248 |
| Number of PLLs | 4 |
| Embedded System Blocks (ESBs) | 26 |
| Encapsulamento | 208-pin PowerQuad QFP (PQFP-208) |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | 0 C to +70 C |
| Speed Grade | C9 |
| Process Technology | 0.18 micron CMOS SRAM |
| Supply Voltage (Core) | 1.8 V typical |
| Configuration Interface | Passive Serial, JTAG (IEEE 1149.1) |
| Programming Method | SRAM-based, in-system programmable |
Configuração de pinos do EP20K100CQ208C9
| Pino 1 | I/O — User I/O pin (bank varies) |
| Pino 2 | I/O — User I/O pin |
| Pino 3 | I/O — User I/O pin |
| Pino 4 | I/O — User I/O pin |
| Pino 5 | I/O — User I/O pin |
| Pino 6 | I/O — User I/O pin |
| Pino 7 | I/O — User I/O pin |
| Pino 8 | I/O — User I/O pin |
| Pino 9 | VCCINT — Core supply voltage (1.8 V typical) |
| Pino 10 | I/O — User I/O pin |
| Pino 11 | GND — Ground |
| Pino 12 | I/O — User I/O pin |
| Pino 13 | I/O — User I/O pin |
| Pino 14 | I/O — User I/O pin |
| Pino 15 | I/O — User I/O pin |
| Pino 16 | I/O — User I/O pin |
| Pino 17 | I/O — User I/O pin |
| Pino 18 | I/O — User I/O pin |
| Pino 19 | I/O — User I/O pin |
| Pino 20 | I/O — User I/O pin |
| Pino 21 | GND — Ground |
| Pino 22 | I/O — User I/O pin |
| Pino 23 | I/O — User I/O pin |
| Pino 24 | I/O — User I/O pin |
| Pino 25 | I/O — User I/O pin |
| Pino 26 | I/O — User I/O pin |
| Pino 27 | I/O — User I/O pin |
| Pino 28 | I/O — User I/O pin |
| Pino 29 | I/O — User I/O pin |
| Pino 30 | I/O — User I/O pin |
| Pino 31 | VCCIO — I/O supply voltage |
| Pino 32 | I/O — User I/O pin |
| Pino 33 | I/O — User I/O pin |
| Pino 34 | I/O — User I/O pin |
| Pino 35 | I/O — User I/O pin |
| Pino 36 | I/O — User I/O pin |
| Pino 37 | I/O — User I/O pin |
| Pino 38 | I/O — User I/O pin |
| Pino 39 | I/O — User I/O pin |
| Pino 40 | I/O — User I/O pin |
| Pino 41 | GND — Ground |
| Pino 42 | I/O — User I/O pin |
| Pino 43 | I/O — User I/O pin |
| Pino 44 | I/O — User I/O pin |
| Pino 45 | I/O — User I/O pin |
| Pino 46 | I/O — User I/O pin |
| Pino 47 | I/O — User I/O pin |
| Pino 48 | I/O — User I/O pin |
| Pino 49 | I/O — User I/O pin |
| Pino 50 | I/O — User I/O pin |
| Pino 51 | VCCINT — Core supply voltage (1.8 V typical) |
| Pino 52 | I/O — User I/O pin |
| Pino 53 | I/O — User I/O pin |
| Pino 54 | I/O — User I/O pin |
| Pino 55 | I/O — User I/O pin |
| Pino 56 | I/O — User I/O pin |
| Pino 57 | I/O — User I/O pin |
| Pino 58 | I/O — User I/O pin |
| Pino 59 | I/O — User I/O pin |
| Pino 60 | I/O — User I/O pin |
| Pino 61 | GND — Ground |
| Pino 62 | I/O — User I/O pin |
| Pino 63 | I/O — User I/O pin |
| Pino 64 | I/O — User I/O pin |
| Pino 65 | I/O — User I/O pin |
| Pino 66 | I/O — User I/O pin |
| Pino 67 | I/O — User I/O pin |
| Pino 68 | I/O — User I/O pin |
| Pino 69 | I/O — User I/O pin |
| Pino 70 | I/O — User I/O pin |
| Pino 71 | VCCIO — I/O supply voltage |
| Pino 72 | I/O — User I/O pin |
| Pino 73 | I/O — User I/O pin |
| Pino 74 | I/O — User I/O pin |
| Pino 75 | I/O — User I/O pin |
| Pino 76 | I/O — User I/O pin |
| Pino 77 | I/O — User I/O pin |
| Pino 78 | I/O — User I/O pin |
| Pino 79 | I/O — User I/O pin |
| Pino 80 | I/O — User I/O pin |
| Pino 81 | GND — Ground |
| Pino 82 | I/O — User I/O pin |
| Pino 83 | I/O — User I/O pin |
| Pino 84 | I/O — User I/O pin |
| Pino 85 | I/O — User I/O pin |
| Pino 86 | I/O — User I/O pin |
| Pino 87 | I/O — User I/O pin |
| Pino 88 | I/O — User I/O pin |
| Pino 89 | I/O — User I/O pin |
| Pino 90 | I/O — User I/O pin |
| Pino 91 | VCCINT — Core supply voltage (1.8 V typical) |
| Pino 92 | I/O — User I/O pin |
| Pino 93 | I/O — User I/O pin |
| Pino 94 | I/O — User I/O pin |
| Pino 95 | I/O — User I/O pin |
| Pino 96 | I/O — User I/O pin |
| Pino 97 | I/O — User I/O pin |
| Pino 98 | I/O — User I/O pin |
| Pino 99 | I/O — User I/O pin |
| Pino 100 | I/O — User I/O pin |
| Pino 101 | GND — Ground |
| Pino 102 | I/O — User I/O pin |
| Pino 103 | I/O — User I/O pin |
| Pino 104 | I/O — User I/O pin |
| Pino 105 | I/O — User I/O pin |
| Pino 106 | I/O — User I/O pin |
| Pino 107 | I/O — User I/O pin |
| Pino 108 | I/O — User I/O pin |
| Pino 109 | I/O — User I/O pin |
| Pino 110 | I/O — User I/O pin |
| Pino 111 | VCCIO — I/O supply voltage |
| Pino 112 | I/O — User I/O pin |
| Pino 113 | I/O — User I/O pin |
| Pino 114 | I/O — User I/O pin |
| Pino 115 | I/O — User I/O pin |
| Pino 116 | I/O — User I/O pin |
| Pino 117 | I/O — User I/O pin |
| Pino 118 | I/O — User I/O pin |
| Pino 119 | I/O — User I/O pin |
| Pino 120 | I/O — User I/O pin |
| Pino 121 | GND — Ground |
| Pino 122 | I/O — User I/O pin |
| Pino 123 | I/O — User I/O pin |
| Pino 124 | I/O — User I/O pin |
| Pino 125 | I/O — User I/O pin |
| Pino 126 | I/O — User I/O pin |
| Pino 127 | I/O — User I/O pin |
| Pino 128 | I/O — User I/O pin |
| Pino 129 | I/O — User I/O pin |
| Pino 130 | I/O — User I/O pin |
| Pino 131 | VCCINT — Core supply voltage (1.8 V typical) |
| Pino 132 | I/O — User I/O pin |
| Pino 133 | I/O — User I/O pin |
| Pino 134 | I/O — User I/O pin |
| Pino 135 | I/O — User I/O pin |
| Pino 136 | I/O — User I/O pin |
| Pino 137 | I/O — User I/O pin |
| Pino 138 | I/O — User I/O pin |
| Pino 139 | I/O — User I/O pin |
| Pino 140 | I/O — User I/O pin |
| Pino 141 | GND — Ground |
| Pino 142 | I/O — User I/O pin |
| Pino 143 | I/O — User I/O pin |
| Pino 144 | I/O — User I/O pin |
| Pino 145 | I/O — User I/O pin |
| Pino 146 | I/O — User I/O pin |
| Pino 147 | I/O — User I/O pin |
| Pino 148 | I/O — User I/O pin |
| Pino 149 | I/O — User I/O pin |
| Pino 150 | I/O — User I/O pin |
| Pino 151 | VCCIO — I/O supply voltage |
| Pino 152 | I/O — User I/O pin |
| Pino 153 | I/O — User I/O pin |
| Pino 154 | I/O — User I/O pin |
| Pino 155 | I/O — User I/O pin |
| Pino 156 | I/O — User I/O pin |
| Pino 157 | I/O — User I/O pin |
| Pino 158 | I/O — User I/O pin |
| Pino 159 | I/O — User I/O pin |
| Pino 160 | I/O — User I/O pin |
| Pino 161 | GND — Ground |
| Pino 162 | nSTATUS — Configuration status (open-drain) |
| Pino 163 | nCONFIG — Configuration control input |
| Pino 164 | DCLK — Configuration clock input |
| Pino 165 | DATA0 — Configuration data input |
| Pino 166 | CONF_DONE — Configuration done output |
| Pino 167 | VCCINT — Core supply voltage (1.8 V typical) |
| Pino 168 | I/O — User I/O pin |
| Pino 169 | I/O — User I/O pin |
| Pino 170 | I/O — User I/O pin |
| Pino 171 | I/O — User I/O pin |
| Pino 172 | I/O — User I/O pin |
| Pino 173 | I/O — User I/O pin |
| Pino 174 | I/O — User I/O pin |
| Pino 175 | I/O — User I/O pin |
| Pino 176 | I/O — User I/O pin |
| Pino 177 | I/O — User I/O pin |
| Pino 178 | I/O — User I/O pin |
| Pino 179 | GND — Ground |
| Pino 180 | I/O — User I/O pin |
| Pino 181 | I/O — User I/O pin |
| Pino 182 | I/O — User I/O pin |
| Pino 183 | I/O — User I/O pin |
| Pino 184 | I/O — User I/O pin |
| Pino 185 | I/O — User I/O pin |
| Pino 186 | I/O — User I/O pin |
| Pino 187 | I/O — User I/O pin |
| Pino 188 | I/O — User I/O pin |
| Pino 189 | I/O — User I/O pin |
| Pino 190 | I/O — User I/O pin |
| Pino 191 | VCCIO — I/O supply voltage |
| Pino 192 | I/O — User I/O pin |
| Pino 193 | I/O — User I/O pin |
| Pino 194 | I/O — User I/O pin |
| Pino 195 | I/O — User I/O pin |
| Pino 196 | I/O — User I/O pin |
| Pino 197 | I/O — User I/O pin |
| Pino 198 | I/O — User I/O pin |
| Pino 199 | I/O — User I/O pin |
| Pino 200 | I/O — User I/O pin |
| Pino 201 | GND — Ground |
| Pino 202 | I/O — User I/O pin |
| Pino 203 | I/O — User I/O pin |
| Pino 204 | I/O — User I/O pin |
| Pino 205 | I/O — User I/O pin |
| Pino 206 | I/O — User I/O pin |
| Pino 207 | I/O — User I/O pin |
| Pino 208 | I/O — User I/O pin |
Aplicações típicas
EP20K100CQ208C9 é adequado para 6 aplicaçãos: Telecommunications Line Card Glue Logic, Industrial Automation Controller, ASIC Prototype Validation, Legacy PCI Bridge Implementation, Digital Signal Processing Front-End, Legacy Avionics Display Controller.
Telecommunications Line Card Glue Logic
The EP20K100CQ208C9 fits legacy telecom line-card designs where 100K gates of programmable logic integrate protocol bridging, FIFO buffering, and clock-domain crossing. With 4 PLLs and 26 embedded system blocks totaling 53,248 RAM bits, it can implement multi-channel HDLC controllers or T1/E1 framer glue logic without external memory. The 208-pin PQFP package is preferred for socketed field-replaceable assemblies common in central-office equipment. Use the device's Passive Serial configuration mode to load bitstreams from a small serial EEPROM at board power-up.
Recomendado
Industrial Automation Controller
For industrial PLCs and motor-control front-ends, the EP20K100CQ208C9 provides 4,160 logic elements plus 159 user I/O - sufficient for combining sensor interfacing, PWM generation, and EtherCAT or Profibus protocol handling on a single die. The 0 to 70 C commercial temperature range fits cabinet-mounted equipment, while the embedded system blocks deliver distributed dual-port RAM for inter-task data exchange. Designers benefit from Altera's legacy MAX+PLUS II toolchain that integrates schematic and VHDL entry with industrial IP libraries.
Recomendado
ASIC Prototype Validation
Engineers validate ASIC RTL on the EP20K100CQ208C9 because its 100K-gate capacity matches many production ASIC designs from the early 2000s, and the SRAM-based fabric allows unlimited design iterations. The device supports in-system JTAG programming so engineers can iterate bitstreams in minutes without removing the chip from the target board. The 4 PLLs reproduce ASIC clock trees, and the 53,248 RAM bits emulate internal ASIC memory blocks for pre-silicon firmware development.
Recomendado
Legacy PCI Bridge Implementation
The EP20K100CQ208C9 implements 32-bit/33 MHz PCI bridge and target interfaces using APEX 20K PCI MegaCore functions, integrating bus arbiter, target/master state machines, and configuration space registers in a single chip. Its 159 user I/O accommodate the multiplexed PCI address/data bus plus sideband signals (REQ#, GNT#, FRAME#, IRDY#). Industrial and embedded motherboards continued using APEX 20K-based PCI bridges well into the 2010s because of proven driver support.
Recomendado
Digital Signal Processing Front-End
For DSP front-ends performing FIR filtering, FFT preprocessing, or sample-rate conversion, the EP20K100CQ208C9 delivers the parallel multiplier-rich fabric needed for streaming sample pipelines. Combined with external SRAM or SDRAM for coefficient storage, the device handles 16-bit audio DSP at rates up to several MSPS. Its 4 PLLs generate the multiple clock domains required for ADC interface logic, DSP datapath, and host processor interface.
Recomendado
Legacy Avionics Display Controller
Military and aerospace display controllers designed in the early 2000s use the EP20K100CQ208C9 to drive LCD panels, perform video timing generation, and overlay graphics on raw video streams. Its 159 user I/O handle parallel RGB interfaces, while 53,248 RAM bits store frame buffer segments. Although the part is now obsolete, flight-qualified assemblies in fielded aircraft continue requiring this exact MPN for FAA-compliant replacement, making drop-in alternatives like C8 and C7 speed grades critical for sustainment logistics.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EP20K100CQ208C9 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EP20K100CQ208C8ES | EP20K100CQ208C8 | EP20K100CQ208C7ES | EP20K100CQ208C7 |
|---|---|---|---|---|---|
| Package | 208-PQFP | 208-PQFP (same) | 208-PQFP (same) | 208-PQFP (same) | 208-PQFP (same) |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Speed Grade | C9 | C8 (slower) | C8 (slower) | C7 (slowest) | C7 (slowest) |
| Logic Elements | 4,160 | 4,160 | 4,160 | 4,160 | 4,160 |
| Typical Gates | 100,000 | 100,000 | 100,000 | 100,000 | 100,000 |
| RAM Bits | 53,248 | 53,248 | 53,248 | 53,248 | 53,248 |
| User I/O | 159 | 159 | 159 | 159 | 159 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- Highest speed grade in the APEX 20K 100K PQFP family (vs EP20K100CQ208C8)
- Engineering sample (ES) variant indicates qualification status (vs EP20K100CQ208C7ES)
- 208-pin PQFP package supports socketed prototyping (vs EP20K100CB356C7)
Notas de projeto
The APEX 20K core operates at 1.8 V (VCCINT) while I/O banks use VCCIO at 2.5 V, 3.3 V, or 5 V depending on interface standard. Decouple each VCCINT pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and add a bulk 100 uF tantalum or aluminum polymer capacitor near the device to handle inrush current during configuration. The configuration bitstream load typically draws 50-100 mA peak, so regulator headroom matters.
Use a continuous ground plane on layer 2 directly under the PQFP-208 device to provide a low-impedance return path for the 4 PLL outputs and high-speed I/O. Route DCLK and DATA0 configuration signals as a matched-length pair (within 100 mil) to avoid configuration failures. Keep PLL analog supply pins (VCC_PLL) isolated with a ferrite bead from digital VCCINT to minimize jitter.
Do not attempt to use Quartus II versions newer than 13.0 - APEX 20K device support was removed. Legacy MAX+PLUS II 10.2 or Quartus II 13.0 are the last tool versions that target this family. JTAG chain must include the EPC configuration device as the first device in the chain if both are JTAG-programmed, otherwise boundary-scan can corrupt the FPGA's configuration memory.
Informações de conformidade
RoHS/REACH/lead-free status not stated in the verified web data. APEX 20K family predates RoHS compliance mandates (2006), so legacy units may use SnPb finish; check distributor date code before placing orders for RoHS-restricted markets.