EP4CE75F29C6N - 75K Logic Elements FPGA | Intel | Embedded Systems
N.º da peça: EP4CE75F29C6N ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $329.8992 | $329,90 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
EP4CE75F29C6N Visão geral
A field-programmable gate array, or FPGA, is a semiconductor device built from configurable logic blocks, programmable interconnects, memory blocks, and surrounding I/O resources. Its hierarchy extends from logic cells to configurable logic, programmable logic, and semiconductor integrated circuits. Engineers configure the device after PCB assembly to implement interfaces, state machines, parallel datapaths, control algorithms, or protocol bridges. Unlike a fixed ASIC, an FPGA can be revised without a new silicon spin, while its parallel fabric can deliver deterministic low-latency processing at clock rates governed by the implemented design and timing constraints.
The headline resource is 75,408 logic elements, supported by 2,810,880 RAM bits and 426 I/O pins. These figures make the device useful when a design must combine many external connections with substantial on-chip control or buffering. The Cyclone IV E architecture also provides embedded functions suited to implementing controllers, memory interfaces, bridge logic, and DSP-oriented datapaths. Exact operating frequencies, transceiver count, embedded multiplier count, supply voltages, logic-element organization, and absolute supported I/O standards are not included in the supplied excerpts and therefore require datasheet confirmation.
For system design, the device should be treated as a power-managed high-density BGA component rather than a generic logic IC. Use the manufacturer electrical-characteristics chapter to establish every rail, permissible I/O condition, power-up requirement, configuration scheme, junction-temperature limit, and timing constraint. Configuration storage, clocking, decoupling, and PCB escape routing must follow the Cyclone IV E reference documentation. The BGA package also requires controlled-assembly processes and thorough signal-integrity and power-integrity review, especially for the 426 user I/O connections.
Typical applications include industrial automation controllers, motor-control and machine-vision preprocessing, communications equipment, test and measurement hardware, medical instrumentation, and security or surveillance systems. In each case, the 75,408 logic elements support integrated control and datapath functions, while the 426 I/O enable broad peripheral connectivity. Designers should evaluate whether selected lower-density Cyclone IV E devices offer sufficient I/O and logic capacity for cost reduction, but any device change requires a fresh pinout, package, speed-grade, power, and timing review.
A primary design consideration is configuration integrity: the FPGA configuration image, clock source, reset path, and power sequencing must be correct before relying on the design. Provide local decoupling at every supply entry, preserve uninterrupted return paths, and follow the exact BGA pin assignments and recommended layer stack. A lower-resource FPGA may save cost if its I/O and logic requirements remain adequate, but it is not automatically a drop-in replacement. This page synthesizes verified ordering data, package identity, available resource counts, and strict replacement guidance beyond a basic distributor listing.
Alternativas drop-in para EP4CE75F29C6N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EP4CE75F29C6N (mesmo formato e footprint) — diferindo em Package, Configuration Modes, Operating Temperature, Process Technology, Speed Grade.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EP4CE75F29C6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$129.9 / unidade
Ver ficha técnica →EP4CE75F29C7N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$152.7 / unidade
Ver ficha técnica →EP4CE75F29I7
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$121.3 / unidade
Ver ficha técnica →EP4CE75F29C6N Classificações máximas e características elétricas
| Product Type | Field Programmable Gate Array (FPGA) |
| Product Family | Cyclone IV E |
| Logic Elements | 75408 |
| Embedded Memory | 2810880 bit |
| User I/O Count | 426 |
| Number of CLBs | 4713 |
| Maximum Frequency | 472.5 MHz |
| Encapsulamento | 780-FBGA |
| Package Code | F29 |
| Device Family Member | EP4CE75 |
| Ordering Part Number | EP4CE75F29C6N |
| Speed Grade | C6 |
| Tipo de montagem | Surface Mount |
| Configuration Technology | SRAM-based FPGA |
Guia de Configuração de Pinos do EP4CE75F29C6N f29
Configuração de pinos para EP4CE75F29C6N (pacote f29). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EP4CE75F29C6N.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EP4CE75F29C6N é adequado para 7 aplicaçãos: Industrial Automation Control, Motor Control and Drive Interface, Machine Vision and Data Acquisition, Communications and Protocol Bridging, Test and Measurement Equipment, Medical and Diagnostic Instrumentation, Security and Surveillance Processing.
Industrial Automation Control
EP4CE75F29C6N fits industrial automation systems that need programmable control combined with broad peripheral connectivity. Its 75,408 logic elements can hold motion-control state machines, protocol conversion, safety-interface monitoring, and real-time sequencing in one device, while 426 user I/O can connect encoders, digital sensors, actuator drivers, and industrial network bridges. The Cyclone IV E programmable architecture lets engineers revise control logic after PCB assembly without redesigning the silicon. Designers should partition the logic carefully, estimate utilization after synthesis, and confirm industrial temperature and I/O-bank requirements from the manufacturer documentation.
Recomendado
Motor Control and Drive Interface
EP4CE75F29C6N can coordinate motor-control functions that combine deterministic digital logic with several external interfaces. The 75,408 logic elements support PWM sequencing, encoder decoding, current-loop assistance, commutation logic, fault handling, and communication between control domains. Its 426 user I/O are valuable for connecting position sensors, gate-driver controls, analog-to-digital converters, and debug or service interfaces. Because the supplied data does not specify supported I/O voltages or operating temperature, the design must verify bank assignments and derating before use. The FPGA configuration should preserve safe outputs during reset and startup.
Recomendado
Machine Vision and Data Acquisition
EP4CE75F29C6N is suitable for machine-vision and data-acquisition front ends that must capture parallel data, format it, and pass it to a host processor. The device offers 75,408 logic elements for line buffers, packetization, filtering, timing generation, and image preprocessing, while 2,810,880 RAM bits can support FIFOs and frame or sample buffers. Its 426 I/O provide headroom for camera interfaces, ADCs, DACs, clocks, and control signals. The exact supported I/O standards and maximum data rate are not in the supplied excerpts, so timing constraints and signal-integrity analysis must be completed before using the device in a high-speed acquisition path.
Recomendado
Communications and Protocol Bridging
EP4CE75F29C6N can implement communications equipment that bridges parallel buses, custom control protocols, and multiple data sources. Its 75,408 logic elements provide capacity for protocol state machines, framing, clock-domain separation, and traffic management, while 426 user I/O allow connection to processors, memories, serializers, and service interfaces. The SRAM-based FPGA fabric is useful when protocol behavior must be updated without replacing the board. The supplied evidence does not establish the number or speed of transceivers, so use this part for logic and I/O-centric bridging unless the official device documentation confirms a particular high-speed serial interface.
Recomendado
Test and Measurement Equipment
EP4CE75F29C6N is a strong fit for test and measurement hardware requiring flexible timing, data formatting, and instrument control. The 75,408 logic elements can implement trigger engines, counters, digital filters, waveform sequencing, and communication handlers, while the 2,810,880 RAM bits support sample buffering and capture management. Its 426 I/O are useful for parallel test fixtures, converters, front-panel controls, and high-density digital connections. The design should use the 472.5 MHz value only as a device-family listing point, not as a guaranteed design frequency; system timing depends on placement, routing, I/O standards, and the selected clocking scheme.
Recomendado
Medical and Diagnostic Instrumentation
EP4CE75F29C6N can support medical and diagnostic equipment that needs configurable signal routing, control, and data handling while maintaining a compact programmable architecture. The 75,408 logic elements allow acquisition sequencing, sensor-interface control, filtering, protocol conversion, and host communication, while 426 user I/O accommodate multiple analog-front-end connections and supervisory signals. The 2,810,880 RAM bits can hold sample queues or intermediate processing data. Medical designs require exact validation of the selected ordering code, reliability documentation, electrical limits, and quality processes; the supplied data does not provide medical qualification, so no regulatory claim is made.
Recomendado
Security and Surveillance Processing
EP4CE75F29C6N can serve as a configurable processing and interface hub in security and surveillance systems. Its 75,408 logic elements support video timing, sensor aggregation, encryption or authentication control, motion-detection preprocessing, and communication with a host processor. The 426 user I/O can connect image sensors, memory devices, network interface components, and control peripherals, while 2,810,880 RAM bits provide buffering for data streams. The device should not be selected solely on the headline logic count: timing, power, security functions, and exact I/O support must be checked in the official Cyclone IV E documentation. Configuration access control and reliable reset behavior are essential in deployed systems.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EP4CE75F29C6N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EP4CE75F29C6 | EP4CE75F29C7N | EP4CE75F29I7 |
|---|---|---|---|---|
| Brand | Altera | Intel | Intel | Intel |
| Package | 780-FBGA, F29 package code | 780-FBGA, F29 package code; equivalence unverified | 780-FBGA, F29 package code; equivalence unverified | 780-FBGA, F29 package code; equivalence unverified |
| Logic Elements | 75408 | 75408 (not independently verified in supplied data) | 75408 (not independently verified in supplied data) | 75408 (not independently verified in supplied data) |
| Ordering Designation | EP4CE75F29C6N | C6 without N suffix | C7N speed variant | I7 industrial variant |
| Verified Drop-In Status | Target part | Not verified from supplied cross-reference data | Not verified from supplied cross-reference data | Not verified from supplied cross-reference data |
| Verified Cross-Brand Equivalent | No cross-brand equivalent supplied | Not applicable | Not applicable | Not applicable |
Principais diferenciais
- Verified 426-user-I/O resource set (vs EP4CE6F17C6N)
- Large 75,408-logic-element fabric (vs EP4CE75F23C6N)
- 2,810,880 RAM bits for data-path buffering (vs EP4CE75F23C6N)
- F29 780-FBGA package identity (vs EP4CE6F17C6N)
Notas de projeto
Start the EP4CE75F29C6N power design from the official Cyclone IV E electrical-characteristics tables, not from the distributor listing. The supplied evidence confirms the FPGA family and 780-FBGA package but does not provide supply rails, current limits, or recommended decoupling. Select regulators for transient load, noise, sequencing, and thermal margin; place local capacitors adjacent to the relevant supply balls; and keep the decoupling return path short. Use the actual synthesized design activity, I/O loading, clock rate, and configuration mode for power estimation. A calculated value is an estimate unless reproduced from the manufacturer datasheet.
The F29 780-FBGA package requires an escape strategy designed from the official land pattern and BGA fanout recommendations. Use the exact ball assignments for the selected speed grade and keep configuration, clock, reset, and power balls on layers that preserve short, low-impedance paths. Reference planes should remain continuous beneath the device, with through-via antipads and return paths reviewed for high-speed I/O. Verify the PCB stack-up, via geometry, solder-mask definition, and assembly capability with the fabricator. Do not reuse a 780-ball footprint from another FPGA family without checking ball diameter, pitch, and pin numbering.
Treat the 426 user I/O as a bank-planning problem rather than assuming every pin is simultaneously usable. Assign I/O voltage, direction, differential or single-ended mode, clocking, and termination from the official pin table and I/O-standard limits. The verified excerpts provide the 426 I/O count but not bank limits, supported standards, or timing details. Constrain every high-speed interface, establish a continuous reference path, and run post-route timing and signal-integrity simulations. During reset or incomplete configuration, outputs and bidirectional pins may not have their normal application behavior, so external devices must tolerate the specified state.
The most likely integration errors are confusing Altera and Intel naming, assuming the N suffix is interchangeable, and treating a different Cyclone IV E package code as a drop-in match. EP4CE75F29C6N is verified as the F29 780-FBGA ordering variant, but the supplied cross-reference results do not prove equivalence for EP4CE75F29C6, EP4CE75F29C7N, or EP4CE75F29I7. Before a substitution, compare every ball function, power pin, bank voltage, configuration pin, speed grade, temperature grade, and package drawing. Also confirm the official Intel/Altera documentation version and generate a fresh pinout report from the selected device library rather than relying on a spreadsheet copied from another design.
Informações de conformidade
The supplied verified excerpts identify the Altera/Intel Cyclone IV E FPGA and 780-FBGA package but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. Obtain the manufacturer declaration for the exact ordering code before regulated or restricted-substance use.
