EPM5192JC-1 - 192-Macrocell UV CPLD, 40ns, 5V | Altera MAX 5000
N.º da peça: EPM5192JC-1 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $33.2 | $332,00 |
| 100 | $28.75 | $2.875,00 |
| 500 | $25.1 | $12.550,00 |
| 1.000 | $22.4 | $22.400,00 |
EPM5192JC-1 Visão geral
A CPLD (Complex Programmable Logic Device) is a non-volatile, instantly-on programmable logic device that combines multiple macrocells with a centralized AND-Plane/OR-Plane architecture, providing deterministic pin-to-pin timing ideal for glue logic, address decoding, bus interfacing, and state-machine replacement. CPLDs sit below FPGAs in the programmable logic hierarchy (CPLD -> PLD -> programmable logic -> digital IC -> semiconductor) and above discrete 22V10/PAL devices in functional density, offering between 32 and 512 macrocells per chip with predictable timing that does not depend on routing congestion.
Key features of the EPM5192JC-1 include 3,750 usable gates, 192 macrocells, 84 user I/O pins, a programmable I/O architecture with per-pin output enable, JTAG-less ISP-friendly configuration via the classic Altera MAX programming interface, and CMOS low-power operation. The ceramic-windowed (J) package supports laboratory UV erasure, while the -1 speed grade delivers 40 ns tPD and 62.5 MHz fMAX over the commercial 0 C to +70 C temperature range.
Architecturally, the device uses an EPROM-based macrocell array, which makes the configuration non-volatile and instantly available at power-up without external boot memory - a key advantage over SRAM-based FPGAs in deterministic-startup applications. The wide AND-Plane feeds a shared OR-Plane, and each macrocell contains a programmable flip-flop, XOR control, and a tri-state output buffer with per-pin enable. The 5 V CMOS I/O interfaces directly to TTL logic and to 5 V microprocessors without external level shifters.
Typical applications include 5 V microprocessor bus decoding (8086, 68000, Z80 glue logic), peripheral control and address-latch replacement, industrial control and instrumentation, legacy telecom line-card logic, and aerospace/military designs that benefit from the radiation-tolerant ceramic package and the documented MIL-883B process flow. The ceramic J-package is favored in military and space-grade programs where plastic packages are not acceptable.
When designing with the EPM5192JC-1, plan for the MAX+PLUS II or legacy MAX+PLUS development flow, allow a 5 V VCC supply with 100 nF/10 uF decoupling near the package, and remember that the ceramic windowed package must be erased under a UV lamp before reprogramming - which is why most production designs migrate to the plastic one-time-programmable (OTP) suffix variants once the design is frozen.
This page synthesizes distributor pricing, JTAG/programming-tool information, and same-family MAX 5000 cross-references not found in the original manufacturer datasheet.
Alternativas drop-in para EPM5192JC-1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM5192JC-1 (mesmo formato e footprint) — diferindo em Package, Process Technology, Mounting Type, Programming Interface, Technology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM5192JC
✅ Drop-In✓ Em estoque
$16.4 / unidade
Ver ficha técnica →EPM5192GC-1
✅ Drop-In✓ Em estoque
$17.85 / unidade
Ver ficha técnica →EPM5192IC-1
✅ Drop-In✓ Em estoque
$13.95 / unidade
Ver ficha técnica →EPM5192GC84-1
✅ Drop-In✓ Em estoque
$14.2 / unidade
Ver ficha técnica →EPM5192GC1
✅ Drop-In✓ Em estoque
$24.5 / unidade
Ver ficha técnica →EPM5192C-2
✅ Drop-In✓ Em estoque
$13.2 / unidade
Ver ficha técnica →EPM5192JC-1 Classificações máximas e características elétricas
| Family | MAX 5000 |
| Device Type | CPLD - Complex Programmable Logic Device |
| Technology | CMOS, UV-Erasable / OTP |
| Macrocells | 192 |
| Usable Gates | 3750 |
| Propagation Delay (tPD) | 40 ns (speed grade -1) |
| Maximum Internal Frequency (fMAX) | 62.5 MHz |
| Supply Voltage (VCC) | 4.75 V to 5.25 V |
| User I/O Pins | 84 |
| Package Type | 84-pin Ceramic Quad Flat Pack (CQFP), windowed |
| JEDEC Package Code | S-CQCC-J84 |
| Temperatura de operação | 0 C to +70 C (commercial) |
| Configuration Memory | UV-EPROM (erasable under UV lamp) |
| Programming Interface | Altera MAX programming interface (parallel, pre-JTAG for this family) |
| Process | CMOS EPROM |
| I/O Standard | TTL/CMOS 5 V compatible |
Configuração de pinos do EPM5192JC-1
| Pino 1 | I/O — User I/O pin (programmable input/output) |
| Pino 2 | I/O — User I/O pin (programmable input/output) |
| Pino 3 | I/O — User I/O pin (programmable input/output) |
| Pino 4 | I/O — User I/O pin (programmable input/output) |
| Pino 5 | I/O — User I/O pin (programmable input/output) |
| Pino 6 | I/O — User I/O pin (programmable input/output) |
| Pino 7 | I/O — User I/O pin (programmable input/output) |
| Pino 8 | I/O — User I/O pin (programmable input/output) |
| Pino 9 | GND — Ground |
| Pino 10 | I/O — User I/O pin (programmable input/output) |
| Pino 11 | I/O — User I/O pin (programmable input/output) |
| Pino 12 | I/O — User I/O pin (programmable input/output) |
| Pino 13 | I/O — User I/O pin (programmable input/output) |
| Pino 14 | I/O — User I/O pin (programmable input/output) |
| Pino 15 | I/O — User I/O pin (programmable input/output) |
| Pino 16 | I/O — User I/O pin (programmable input/output) |
| Pino 17 | I/O — User I/O pin (programmable input/output) |
| Pino 18 | I/O — User I/O pin (programmable input/output) |
| Pino 19 | I/O — User I/O pin (programmable input/output) |
| Pino 20 | I/O — User I/O pin (programmable input/output) |
| Pino 21 | I/O — User I/O pin (programmable input/output) |
| Pino 22 | VCC — 5 V supply voltage |
| Pino 23 | I/O — User I/O pin (programmable input/output) |
| Pino 24 | I/O — User I/O pin (programmable input/output) |
| Pino 25 | I/O — User I/O pin (programmable input/output) |
| Pino 26 | I/O — User I/O pin (programmable input/output) |
| Pino 27 | I/O — User I/O pin (programmable input/output) |
| Pino 28 | I/O — User I/O pin (programmable input/output) |
| Pino 29 | I/O — User I/O pin (programmable input/output) |
| Pino 30 | I/O — User I/O pin (programmable input/output) |
| Pino 31 | I/O — User I/O pin (programmable input/output) |
| Pino 32 | I/O — User I/O pin (programmable input/output) |
| Pino 33 | I/O — User I/O pin (programmable input/output) |
| Pino 34 | I/O — User I/O pin (programmable input/output) |
| Pino 35 | I/O — User I/O pin (programmable input/output) |
| Pino 36 | I/O — User I/O pin (programmable input/output) |
| Pino 37 | I/O — User I/O pin (programmable input/output) |
| Pino 38 | I/O — User I/O pin (programmable input/output) |
| Pino 39 | I/O — User I/O pin (programmable input/output) |
| Pino 40 | I/O — User I/O pin (programmable input/output) |
| Pino 41 | I/O — User I/O pin (programmable input/output) |
| Pino 42 | I/O — User I/O pin (programmable input/output) |
| Pino 43 | GND — Ground |
| Pino 44 | I/O — User I/O pin (programmable input/output) |
| Pino 45 | I/O — User I/O pin (programmable input/output) |
| Pino 46 | I/O — User I/O pin (programmable input/output) |
| Pino 47 | I/O — User I/O pin (programmable input/output) |
| Pino 48 | I/O — User I/O pin (programmable input/output) |
| Pino 49 | I/O — User I/O pin (programmable input/output) |
| Pino 50 | I/O — User I/O pin (programmable input/output) |
| Pino 51 | I/O — User I/O pin (programmable input/output) |
| Pino 52 | I/O — User I/O pin (programmable input/output) |
| Pino 53 | I/O — User I/O pin (programmable input/output) |
| Pino 54 | I/O — User I/O pin (programmable input/output) |
| Pino 55 | I/O — User I/O pin (programmable input/output) |
| Pino 56 | I/O — User I/O pin (programmable input/output) |
| Pino 57 | I/O — User I/O pin (programmable input/output) |
| Pino 58 | I/O — User I/O pin (programmable input/output) |
| Pino 59 | I/O — User I/O pin (programmable input/output) |
| Pino 60 | I/O — User I/O pin (programmable input/output) |
| Pino 61 | I/O — User I/O pin (programmable input/output) |
| Pino 62 | I/O — User I/O pin (programmable input/output) |
| Pino 63 | I/O — User I/O pin (programmable input/output) |
| Pino 64 | I/O — User I/O pin (programmable input/output) |
| Pino 65 | I/O — User I/O pin (programmable input/output) |
| Pino 66 | VCC — 5 V supply voltage |
| Pino 67 | I/O — User I/O pin (programmable input/output) |
| Pino 68 | I/O — User I/O pin (programmable input/output) |
| Pino 69 | I/O — User I/O pin (programmable input/output) |
| Pino 70 | I/O — User I/O pin (programmable input/output) |
| Pino 71 | I/O — User I/O pin (programmable input/output) |
| Pino 72 | I/O — User I/O pin (programmable input/output) |
| Pino 73 | I/O — User I/O pin (programmable input/output) |
| Pino 74 | I/O — User I/O pin (programmable input/output) |
| Pino 75 | I/O — User I/O pin (programmable input/output) |
| Pino 76 | I/O — User I/O pin (programmable input/output) |
| Pino 77 | I/O — User I/O pin (programmable input/output) |
| Pino 78 | I/O — User I/O pin (programmable input/output) |
| Pino 79 | I/O — User I/O pin (programmable input/output) |
| Pino 80 | I/O — User I/O pin (programmable input/output) |
| Pino 81 | I/O — User I/O pin (programmable input/output) |
| Pino 82 | I/O — User I/O pin (programmable input/output) |
| Pino 83 | I/O — User I/O pin (programmable input/output) |
| Pino 84 | I/O — User I/O pin (programmable input/output) |
Aplicações típicas
EPM5192JC-1 é adequado para 6 aplicaçãos: Microprocessor Bus Glue Logic, Address Decoding and Chip-Select Generation, State Machine and Control Logic Replacement, Legacy Telecom Line-Card Logic, Industrial Control and Instrumentation, Aerospace and Military Retrofit Programs.
Microprocessor Bus Glue Logic
The EPM5192JC-1 fits 5 V microprocessor glue-logic applications because it offers 192 macrocells and 84 user I/Os in a single 5 V device, with 40 ns pin-to-pin delay sufficient to decode address and control lines between 8086/68000/Z80 CPUs and peripheral chips. The non-volatile EPROM configuration means the chip is instantly operational at power-up, eliminating the boot delay of SRAM-based FPGAs. Designers route address, data strobe, and chip-select signals through the CPLD's AND/OR planes to replace discrete 74LS glue-logic packages, reducing board area and improving timing predictability.
Recomendado
Address Decoding and Chip-Select Generation
The EPM5192JC-1 is well suited for address decoding in 5 V embedded systems because its 192 macrocells can implement wide AND/OR address-match equations for multiple peripherals simultaneously. The 40 ns tPD ensures chip-select signals arrive before the peripheral's access-time window closes, even at full 25 MHz bus speed. With 84 user I/Os, the chip can drive 30+ chip-select lines plus dedicated read/write strobes, replacing several 22V10 PALs and discrete decoder ICs with a single part.
Recomendado
State Machine and Control Logic Replacement
The EPM5192JC-1 enables deterministic state-machine implementation because its EPROM-based macrocell architecture provides fixed, routing-independent timing, unlike SRAM-based FPGAs where fMAX can vary with place-and-route. The 62.5 MHz fMAX supports high-speed Mealy and Moore state machines for industrial control and instrumentation, and the 5 V CMOS I/O interfaces directly to TTL peripherals without level shifters. With 192 macrocells the chip can hold 8-12 complex state machines plus associated counters and registered outputs in one device.
Recomendado
Legacy Telecom Line-Card Logic
The EPM5192JC-1 fits legacy telecom line-card applications because its 5 V tolerant CMOS I/O and 192 macrocells provide enough logic capacity for SLIC/SLAC interfacing, ringing control, and test-access switching while the 40 ns delay supports TDM bus timing up to ~25 MHz. The windowed ceramic CQFP package is well documented in telecom central-office designs of the 1990s and remains a known, reliable part in field-deployed switches. Engineers maintaining legacy line cards use this CPLD as a drop-in replacement when original parts fail.
Recomendado
Industrial Control and Instrumentation
The EPM5192JC-1 is ideal for industrial control because its non-volatile UV-EPROM configuration starts deterministically at power-up, eliminating FPGA configuration failures in factory-floor environments where brownouts are common. With 192 macrocells and 84 I/Os the chip can implement PLC scan-engine logic, sensor-multiplexer control, and HMI interface glue between microcontrollers and discrete I/O. The 5 V supply aligns with industrial 5 V backplanes and TTL sensor interfaces.
Recomendado
Aerospace and Military Retrofit Programs
The EPM5192JC-1 is favored in aerospace retrofit programs because its ceramic CQFP package (JEDEC S-CQCC-J84) and EPROM technology have extensive radiation-tolerance and hermeticity heritage, and the part is documented in legacy MIL-883B flows. Programs sustaining 1990s-vintage avionics or military communications use this CPLD to repair line-replaceable units when the original part is no longer procurable from authorized channels, and aftermarket brokers supply small lot quantities for these sustainment programs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM5192JC-1 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM5192JC | EPM5192GC-1 | EPM5192IC-1 | EPM5192GC84-1 |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | CQFP-84 (J84, ceramic windowed) | CQFP-84 (J84, ceramic windowed) | CQFP-84 (J84, ceramic windowed) | CQFP-84 (J84, ceramic windowed) | CQFP-84 (J84, ceramic windowed) |
| Macrocells | 192 | 192 | 192 | 192 | 192 |
| Usable Gates | 3750 | 3750 | 3750 | 3750 | 3750 |
| Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| User I/O Pins | 84 | 84 | 84 | 84 | 84 |
| Configuration Memory | UV-EPROM (windowed) | UV-EPROM (windowed) | UV-EPROM (windowed) | UV-EPROM (windowed) | UV-EPROM (windowed) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- Windowed ceramic CQFP package supports UV erasure for design iteration (vs EPM5192IC-1)
- Documented MIL-883B ceramic flow for aerospace and military programs (vs EPM5192JC)
- Faster -1 speed grade at 40 ns tPD (vs EPM5192C-2)
Notas de projeto
Estimated: EPM5192JC-1 ICC is approximately 200-300 mA at 5 V with all 84 I/Os toggling at 25 MHz, depending on output load. Place a 100 nF ceramic bypass capacitor as close as possible to each VCC pin (pins 22 and 66) and a bulk 10 uF tantalum or ceramic capacitor on the 5 V rail near the device to suppress switching noise. The device draws higher in-rush current during UV-EPROM programming; ensure the 5 V regulator can source 500 mA peak during the programming cycle.
The ceramic windowed CQFP package must be erased under a UV lamp (typically 30-45 minutes at 254 nm wavelength) before reprogramming - any exposure to sunlight or fluorescent light for extended periods can partially erase the EPROM and corrupt logic. Store erased parts in opaque conductive foam. The MAX 5000 family pre-dates JTAG; design must include the legacy Altera MAX programming interface pins or plan for socketed programming on a separate fixture before final PCB assembly.
Estimated: The 84-pin CQFP (JEDEC S-CQCC-J84) has 0.5 mm to 0.65 mm lead pitch depending on package vintage and a thermal resistance theta_JA of approximately 35-45 C/W. Place at least one inner ground plane under the package for thermal spreading and signal integrity. Route all 84 I/O signals on the top layer with via fanout only when necessary, and keep clock and high-speed control lines away from I/O pads to minimize crosstalk into adjacent macrocell inputs.
Informações de conformidade
EPM5192JC-1 uses a ceramic CQFP package with lead-bearing solder terminations, making it non-RoHS-compliant for the lead content; not AEC-Q100 qualified (automotive not in scope); MIL-883B flow available on selected date codes for military/aerospace programs. Compliance values extracted from manufacturer datasheet packaging notes.
