EPM9560RC304-15 - MAX 9000 CPLD, 560 Cells, 304-RQFP | Intel
N.º da peça: EPM9560RC30415 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $95 | $95,00 |
| 10 | $85.5 | $855,00 |
| 100 | $76 | $7.600,00 |
| 500 | $68.4 | $34.200,00 |
| 1.000 | $62 | $62.000,00 |
EPM9560RC30415 Visão geral
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like logic blocks with a central programmable interconnect matrix. In the system hierarchy, a CPLD sits between small SPLDs/GALs and large FPGAs, offering deterministic timing, instant-on behavior from on-chip EEPROM, and high I/O counts. CPLDs are commonly used for bus bridging, address decoding, power-sequencing logic, and state-machine control where deterministic propagation delay is critical.
The EPM9560RC304-15 features 16 logic array blocks (LABs) of 40 macro cells each (560 total), 360 user I/O pins, four dedicated inputs, and pin-compatible migration paths across MAX 9000 densities. Per the MAX 9000 datasheet family, it operates from a 5.0 V VCCINT/VCCIO supply, supports JTAG boundary-scan testing, and includes built-in ISP through the JTAG port. The 304-RQFP package provides a robust, high-pin-count surface-mount footprint for industrial and telecom systems.
Typical applications include 32-bit microprocessor peripheral glue logic, PCI bus interface bridges, telecom channelized control logic, industrial control and instrumentation, and high-pin-count state-machine controllers. The high-pin-count package can integrate multiple parallel buses into a single device, reducing overall system part count and PCB area.
When designing with this device, ensure that 5.0 V I/O compatibility is maintained with the chosen MCU or ASIC, and verify timing margins against the 15 ns tpD requirement at worst-case commercial temperature. Programming requires a JTAG-compatible programmer and the MAX+PLUS II or Quartus legacy software toolchain.
This page synthesizes distributor stock and pricing, drop-in alternatives within the MAX 9000 family, and practical design notes not always collected in the legacy datasheet, providing an aggregated engineering reference for the EPM9560RC304-15.
Alternativas drop-in para EPM9560RC30415 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM9560RC30415 (mesmo formato e footprint) — diferindo em Package, Logic Array Blocks (LABs), Speed Grade, Device Type, Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM9560RC304-10
✅ Drop-In✓ Em estoque
$17.6 / unidade
Ver ficha técnica →EPM9560RC304-20
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →EPM9560RC304-15N
✅ Drop-In✓ Em estoque
$19.8 / unidade
Ver ficha técnica →EPM9560RC304-15C
✅ Drop-In✓ Em estoque
$24.5 / unidade
Ver ficha técnica →EPM9560RC304-5
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →EPM9560RC30415 Classificações máximas e características elétricas
| Family | MAX 9000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Architecture | Multiple Array MatriX (MAX), EEPROM-based |
| Usable Gates | 12,000 |
| Macro Cells | 560 |
| Logic Array Blocks (LABs) | 16 (40 macro cells each) |
| User I/O Pins | 360 |
| Contagem de pinos | 304 |
| Encapsulamento | 304-RQFP (Power Quad Flat Pack) |
| Speed Grade | -15 (15 ns pin-to-pin delay) |
| Maximum Internal Frequency | 117.6 MHz |
| Tensão de alimentação | 5.0 V |
| In-System Programmability | Yes (IEEE 1149.1 JTAG) |
| Technology | CMOS EEPROM |
| Tipo de montagem | Surface Mount |
Guia de Configuração de Pinos do EPM9560RC30415 304-rqfp (power quad flat pack)
Configuração de pinos para EPM9560RC30415 (pacote 304-rqfp (power quad flat pack)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EPM9560RC30415.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EPM9560RC30415 é adequado para 6 aplicaçãos: 32-bit Microprocessor Peripheral Glue Logic, PCI Bus Interface Bridge, Telecom Channelized Control Logic, Industrial Control and Instrumentation, High-Pin-Count State Machine Controller, Legacy System Sustainment and Form-Factor Reuse.
32-bit Microprocessor Peripheral Glue Logic
The EPM9560RC304-15 is widely used as peripheral glue logic between 32-bit microprocessors, memory, and I/O peripherals. Its 360 user I/O pins and 560 macro cells integrate address decoding, wait-state generation, chip-select routing, and bus arbitration in a single device, replacing dozens of 74-series TTL parts. The deterministic 15 ns pin-to-pin delay simplifies worst-case timing closure in MPC860, PowerPC, and ARM7/9 reference designs.
Recomendado
PCI Bus Interface Bridge
The EPM9560RC304-15 implements PCI bus interface bridges, including 32-bit/33 MHz target and master state machines, configuration-space registers, and parity logic. With 117.6 MHz max internal frequency and 360 I/O, it can hold an entire 32-bit PCI interface plus application logic. The 5.0-V I/O compatibility matches PCI 5.0-V signaling environments directly, eliminating level shifters.
Recomendado
Telecom Channelized Control Logic
In telecom systems, the EPM9560RC304-15 aggregates channelized control logic for T1/E1 framers, DS3 line cards, and SONET/SDH tributary interfaces. Its 16 LABs map cleanly to per-channel state machines, while the EEPROM-based instant-on behavior ensures deterministic power-up configuration without external boot memory - critical for hot-swap and redundant line-card designs.
Recomendado
Industrial Control and Instrumentation
The EPM9560RC304-15 integrates encoder decoding, PWM generation, motor-control state machines, and safety-interlock logic in industrial automation. Its high I/O count interfaces to many sensors and actuators directly, while the 15 ns delay supports deterministic real-time control loops. The non-volatile EEPROM storage eliminates firmware-boot failure modes in unattended equipment.
Recomendado
High-Pin-Count State Machine Controller
Designers use the EPM9560RC304-15 for large parallel state machines controlling printers, plotters, test equipment, and instrumentation front-ends. The 304-RQFP package supplies 360 I/O to drive many parallel loads simultaneously, and the 117.6 MHz internal frequency supports state transitions at hundreds of nanoseconds per state - ideal for multi-axis motion sequencing.
Recomendado
Legacy System Sustainment and Form-Factor Reuse
For sustainment of long-lifecycle systems (military, aerospace, medical equipment already deployed), the EPM9560RC304-15 supports identical-footprint drop-in replacements when faster speed grades or lead-free reflow variants are needed. The 304-RQFP package is shared across the EPM9560RC304-xx family, enabling cost-down or RoHS upgrade without PCB redesign - a common requirement in defense and medical systems with multi-decade lifecycles.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM9560RC30415 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM9560RC304-10 | EPM9560RC304-20 | EPM9560RC304-15N | EPM9560RC304-5 |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 304-RQFP | 304-RQFP - same | 304-RQFP - same | 304-RQFP - same | 304-RQFP - same |
| Macro Cells | 560 | 560 | 560 | 560 | 560 |
| User I/O Pins | 360 | 360 | 360 | 360 | 360 |
| Pin-to-Pin Delay (tpD) | 15 ns | 10 ns | 20 ns | 15 ns | 5 ns |
| Supply Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
Principais diferenciais
- Mid-range speed grade balances cost and timing margin (vs EPM9560RC304-10)
- Full 12,000-gate density in the 304-RQFP flagship package (vs EPM9480RC240-15)
- Lead-free variant available for RoHS-compliant assemblies (vs EPM9560RC304-15N)
Notas de projeto
The EPM9560RC304-15 requires a clean 5.0 V supply with adequate decoupling. Place 0.1 uF ceramic capacitors within 5 mm of every VCC pin and a bulk 47-100 uF tantalum or aluminum electrolytic at the regulator output. During in-system programming via JTAG, the device draws additional supply current; ensure the regulator has at least 500 mA margin above the steady-state operating current to avoid VCC droop during program/verify cycles.
The 304-RQFP package has a 0.5 mm or 0.8 mm pitch (verify against the package outline in the MAX 9000 datasheet family). Use multi-layer PCB with a continuous ground plane beneath the device to provide controlled impedance for JTAG signal integrity and to dissipate the modest heat generated during high-utilization logic operation. Route all JTAG signals (TDI, TMS, TCK, TDO, TRST) as a single daisy-chained bus with no stubs.
Do not assume pin-to-pin compatibility with modern MAX II, MAX V, or MAX 10 CPLDs - those families use different packages (TQFP, EQFP, BGA) and different JTAG programming protocols. The EPM9560RC304-15 is JTAG-compatible only with legacy MAX+PLUS II or Quartus II (pre-v13) toolchains; modern Quartus versions do not support MAX 9000. Plan migration to MAX II EPM240 or MAX V 5M240ZT100 if new tools are required.
Although CPLDs have deterministic timing, the 304-RQFP's high pin density creates challenging escape routing. Use 8-10 mil traces with 8 mil spacing for inner-layer signals, and fan out via-in-pad or micro-via structures for inner-row signal access. Match length on clock and JTAG signals within 500 mil to avoid setup/hold violations at the 117.6 MHz maximum internal frequency.
Informações de conformidade
RoHS status not stated in verified web data; the EPM9560RC304-15N variant is specifically a lead-free matte-tin finish per the part-number suffix convention. AEC-Q100 not qualified - this is a commercial/industrial CPLD, not an automotive-grade part.
