ICS557G-03 - 200MHz Spread-Spectrum Clock | Renesas
N.º da peça: ICS557G-03 ✓ AtivoICS557G-03 Visão geral
A spread-spectrum clock generator is a timing semiconductor that intentionally varies clock frequency over a controlled range to spread radiated energy across a wider frequency spectrum. This technique lowers peak electromagnetic emissions without changing the fundamental 200 MHz operating frequency. In the broader semiconductor hierarchy, the ICS557G-03 belongs to the clock and timing IC family, where it combines clock generation, phase locking, distribution, and EMI-control functions.
The principal features of the ICS557G-03 include a 200 MHz output, one clock output, PCI Express Gen 1 and Ethernet support, and a PLL-based architecture. The 16-TSSOP package is suitable for compact desktop, industrial, and embedded circuit boards. Its clock and crystal input options allow it to operate from an existing reference or a crystal source, while HCSL and LVDS output support accommodates high-speed differential signaling needs.
Internally, the PLL provides the clock-generation mechanism required to create a stable reference-related output while applying frequency dithering for spectrum spreading. This is important in systems where reducing peak EMI improves electromagnetic-compatibility margin without requiring major changes to the downstream clock architecture. Because the ICS557G-03 is identified as both a spread-spectrum clock generator and fanout buffer, it can serve as the central timing source for compatible PCIe or Ethernet equipment.
Typical applications include PCI Express Gen 1 cards, Ethernet interface equipment, embedded computer systems, industrial controllers, and compact PCs. The device is particularly relevant where radiated emissions from a high-speed reference clock could interfere with nearby radio, communications, or test equipment. It can also support clock distribution within systems that require a controlled low-frequency clock source.
The primary design consideration is ensuring that the selected input reference, crystal, output loading, and downstream receiver comply with the requirements of the Renesas datasheet. Differential trace routing, stable return paths, controlled impedance, and correct termination are essential for stable HCSL or LVDS operation. PCB placement should minimize clock-loop area and keep sensitive routing away from noisy power-conversion stages.
This product page combines the Renesas function description, verified distributor specifications, package details, practical implementation guidance, and same-package replacement analysis. It is intended to help engineers determine whether the ICS557G-03 satisfies the required frequency, interface, EMI-control, package, and sourcing constraints before beginning a board-level design.
Alternativas drop-in para ICS557G-03 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
557G-03
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
557G-03LF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ICS557G-03LF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ICS557G-05ALF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ICS557G-03 Especificações
| Device Type | Spread-spectrum clock generator and fanout buffer |
| Maximum Output Frequency | 200 MHz |
| Número de saídas | 1 output |
| Encapsulamento | 16-pin TSSOP |
| Input Type | Clock or crystal |
| PLL | Yes |
| Tipo de saída | HCSL and LVDS |
| Primary Application | Ethernet and PCI Express (PCIe) |
| PCI Express Support | PCI Express Gen 1 |
| Ethernet Support | Yes |
| EMI Reduction Function | Spread-spectrum clock generation |
| Input Reference Frequency | 25 MHz |
| Tipo de montagem | Surface mount |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
Guia de Configuração de Pinos do ICS557G-03 16-pin tssop
Configuração de pinos para ICS557G-03 (pacote 16-pin tssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ICS557G-03.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ICS557G-03 é adequado para 6 aplicaçãos: PCI Express Gen 1 Card Clocking, Ethernet Interface Timing, EMI-Sensitive Embedded Systems, Compact Industrial Controllers, PC Expansion and Interface Cards, High-Speed Test and Measurement Equipment.
PCI Express Gen 1 Card Clocking
The ICS557G-03 is suitable for providing a 200 MHz reference clock in PCI Express Gen 1 equipment because the Renesas 557-03 datasheet identifies Gen 1 support as a primary function. Its PLL-based spread-spectrum operation keeps the nominal clock at 200 MHz while distributing energy across a broader spectrum to reduce peak EMI. The 16-pin TSSOP package also supports compact add-in-card layouts. Before fabrication, verify the card's reference-clock topology, differential routing, termination, jitter requirements, and the exact output configuration in the manufacturer datasheet.
Recomendado
Ethernet Interface Timing
The ICS557G-03 can serve as a compact timing source for Ethernet interface equipment requiring a controlled 200 MHz clock and reduced electromagnetic emissions. Its clock-or-crystal input capability supports either an existing 25 MHz reference or a crystal-based implementation, while HCSL and LVDS output options provide differential clocking choices. Spread-spectrum operation helps move radiated energy away from narrow-band peaks. Confirm receiver voltage thresholds, termination, jitter limits, and spread-spectrum requirements against the specific Ethernet design before using it as the system clock.
Recomendado
EMI-Sensitive Embedded Systems
The ICS557G-03 is appropriate for embedded systems in which a high-speed clock could create difficult radiated-emission peaks. By operating as a 200 MHz spread-spectrum clock generator, it reduces the concentration of energy at a single carrier frequency and can improve EMI margin in compact industrial equipment. The single-output 16-pin TSSOP package simplifies board allocation when the system requires one controlled reference rather than a multi-output distribution network. Designers should still perform enclosure, cable, return-path, and PCB-impedance analysis because spectrum spreading reduces but does not eliminate emissions.
Recomendado
Compact Industrial Controllers
A 200 MHz clock can support high-speed control-plane, interface, or communication circuitry in a compact industrial controller, and the ICS557G-03 combines that frequency with spectrum spreading. Its 16-pin TSSOP package is practical for space-constrained boards, while the PLL accepts a clock or crystal reference for flexible source selection. The device is most valuable when a fixed high-frequency clock would otherwise dominate radiated emissions. Validate industrial temperature requirements, clock startup time, jitter, output loading, and grounding because those requirements are not defined by the product family description alone.
Recomendado
PC Expansion and Interface Cards
The ICS557G-03 was expressly positioned for PC and embedded systems seeking substantial EMI reduction, making it relevant to expansion cards and interface modules with high-speed clock domains. Its 200 MHz output, PLL architecture, and 16-pin TSSOP package fit compact add-in designs where a conventional fixed-frequency oscillator could create narrow-band emissions. Place the device near the clock receiver, preserve a continuous ground reference, and use the differential output arrangement prescribed by the manufacturer datasheet. Confirm the host bus's clock tolerance and compliance test configuration before release.
Recomendado
High-Speed Test and Measurement Equipment
The ICS557G-03 can support test and measurement equipment requiring a low-emission 200 MHz reference, particularly when the clock generator is close to sensitive analog, RF, or high-speed acquisition circuitry. Spread-spectrum operation reduces peak energy in a narrow frequency band, while the PLL allows the source to derive its output from a 25 MHz clock or crystal reference. The 16-pin TSSOP package supports compact instrument architectures. Validate clock purity, jitter, deterministic jitter, and receiver compatibility separately, since spectrum spreading is an EMI-control technique rather than a substitute for low-jitter timing analysis.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ICS557G-03 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 557G-03 | 557G-03LF | ICS557G-03LF | ICS557G-05ALF |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-TSSOP | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same |
| Device Type | Spread-spectrum clock generator and fanout buffer | Clock generator | PCI Express clock source | Clock generator | Clock generator for processors |
Principais diferenciais
- Matches the directly compared 200 MHz clock-source specifications (vs 557G-03)
- Retains a 16-pin TSSOP footprint within the Renesas 557 family (vs 557G-03LF)
- Uses the documented ICS557G-03 family ordering (vs ICS557G-03LF)
- Provides a PLL-based differential clocking function (vs ICS557G-05ALF)
Notas de projeto
Route the HCSL or LVDS clock as a controlled-impedance differential pair with a continuous ground reference and closely matched length. Keep the pair away from switching nodes and high-current power-return paths. Place the clock generator near the receiving buffer to minimize trace loss and sensitivity to external noise. Follow the pin-description and recommended-layout diagrams in the Renesas 557-03 datasheet when assigning the 16 TSSOP connections.
Determine whether the design requires HCSL or LVDS and apply the corresponding receiver termination and output-loading arrangement. The choice of logic standard affects voltage levels, termination, AC coupling requirements, and allowable loading. Verify the selected output against the downstream receiver's thresholds and timing budget rather than treating both standards as electrically interchangeable. Use the manufacturer electrical-characteristics table for the final bias, termination, and load values.
Do not assume that a related 557G ordering suffix is automatically equivalent. The ordering code can affect package form, lead finish, qualification, or production status even when the device remains in the same clock family. Before substitution, compare the exact package drawing, pinout, operating limits, PLL behavior, spread-spectrum profile, and lifecycle status. In particular, confirm that the intended 16-pin TSSOP footprint matches the board rather than relying only on the device family name.
Spectrum spreading reduces the peak energy concentrated at the nominal 200 MHz clock frequency, but it does not replace conventional EMI-control practices. Keep the crystal or reference-clock loop small, connect the ground and supply planes carefully, and avoid routing the sensitive clock beside switching converters or high-speed data lanes. Evaluate the completed assembly with the intended enclosure, cables, and load because spreading behavior and PCB leakage currents can influence measured emissions.
Informações de conformidade
No explicit compliance declaration was captured for the exact ordering code. Compliance must be confirmed through the current Renesas product documentation before regulated production release.