ICS570AI - 170MHz Clock Generator | Renesas Electronics
N.º da peça: ICS570AI ✓ AtivoICS570AI Visão geral
A clock generator is an integrated circuit that establishes a stable reference frequency and distributes clock signals to digital logic. A zero-delay buffer preserves clock-edge relationships while compensating for propagation delays introduced by PCB traces and interconnects. The ICS570AI belongs to the ClockBlocks family and integrates an analog/digital PLL with a zero-delay-buffer function, placing it within the broader hierarchy of clock and timing ICs, clock generators, and semiconductor timing devices.
The primary features include operation up to 170 MHz, four-clock fanout distribution, spread-spectrum clock generation, zero-delay buffering, and multiplier functionality. Spread-spectrum operation reduces energy concentrated at a single frequency, which can reduce narrowband emissions and improve electromagnetic-compatibility behavior in systems that need controlled clock spreading. Fanout allows multiple destinations to receive related clock signals from one source while maintaining consistent phase relationships.
Technically, the device uses proprietary analog/digital PLL techniques to multiply or generate the required output frequency and to compensate for clock-path delay. This architecture is intended for high-speed systems in which several digital subsystems must operate from a common timing reference. The A-version is identified for 5 V designs, while the device family also includes a 3.3 V B-version; therefore, supply voltage must be checked carefully when comparing family members or considering a replacement.
Typical applications include high-speed data-transfer equipment, memory interfaces, communications equipment, network-processing systems, server and storage platforms, and clock-distribution trees for FPGA-based or ASIC-based designs. The 170 MHz rating makes the device relevant to legacy and established digital platforms that need a compact, integrated alternative to discrete oscillators, dividers, and multiple buffer stages.
PCB implementation should prioritize short clock routes, continuous return paths, and symmetrical fanout geometry. Place decoupling capacitors close to the supply and ground pins, and avoid routing sensitive clock nets beneath noisy switching components. Because spread-spectrum settings and PLL loop behavior affect system timing, validate output jitter, skew, rise time, and EMI at the intended operating frequency before production release.
This product page organizes the verified operating limits, package information, sourcing guidance, engineering applications, replacement constraints, and design checks for the ICS570AI. It also distinguishes documented electrical facts from parameters that require confirmation against the manufacturer datasheet or system measurements, helping engineers make a technically defensible design decision.
Alternativas drop-in para ICS570AI — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ICS570AI (mesmo formato e footprint) — diferindo em Package, Product Type.
ICS570A
✅ Drop-InConsulte o preço
Ver ficha técnica →ICS570AI Especificações
| Product Type | Fanout distribution, spread-spectrum clock generator, zero-delay buffer |
| Frequência máxima de clock | 170 MHz |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Clock Outputs | 4 outputs |
| Timing Architecture | Analog/digital phase-locked-loop techniques |
| Clocking Functions | Multiplier, zero-delay buffer, fanout distribution |
| Frequency Control Feature | Spread-spectrum clock generation |
| Encapsulamento | 8-SOIC, 0.154 inch / 3.90 mm width |
| Tipo de montagem | Surface mount |
| Shipping Format | Tube |
| Product Family | ClockBlocks |
| Recommended Supply Design | 5 V design for the A version |
Guia de Configuração de Pinos do ICS570AI 8-soic, 0.154 inch / 3.90 mm width
Configuração de pinos para ICS570AI (pacote 8-soic, 0.154 inch / 3.90 mm width). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ICS570AI.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ICS570AI é adequado para 6 aplicaçãos: FPGA Clock Distribution, High-Speed Data Transfer Equipment, Memory Interface Clocking, ASIC and Processor Timing, Communications Equipment, Industrial Control and Instrumentation.
FPGA Clock Distribution
The ICS570AI fits FPGA designs that need one timing reference distributed to several logic regions through a compact clock tree. Its 170 MHz maximum clock frequency, four-output fanout, and zero-delay-buffer function help maintain related edge timing across the device and PCB routing. Spread-spectrum capability can also reduce narrowband clock energy when the FPGA timing budget permits the configured modulation. Before deployment, confirm the FPGA input-clock requirements, allowable jitter, relationship between internal and external PLLs, and maximum operating frequency across the complete temperature range.
Recomendado
High-Speed Data Transfer Equipment
The ICS570AI is appropriate for established high-speed data-transfer equipment requiring clock multiplication, distribution, and delay compensation from one 8-SOIC device. At frequencies up to 170 MHz, its integrated analog/digital PLL can provide the timing reference needed by multiple digital channels while spread-spectrum operation broadens the emitted frequency spectrum. The board designer should balance output loading and trace length across the fanout network, maintain a continuous ground reference, and measure edge quality, skew, and deterministic jitter on the completed design.
Recomendado
Memory Interface Clocking
The ICS570AI can support clocking architectures around memory controllers and interface bridges where a common low-skew reference must reach several destinations. Its four-output fanout reduces the need for separate buffer devices, while the zero-delay function helps counter PCB propagation delay. The 170 MHz rating accommodates many established memory-interface clock rates, although the actual operating point must remain compatible with memory timing requirements. Validate command-to-clock, data-to-clock, and write-strobe relationships under worst-case loading and temperature rather than relying only on nominal device timing.
Recomendado
ASIC and Processor Timing
The ICS570AI serves as a compact external timing block for processor-centric and ASIC-based systems that distribute a common clock among several functional blocks. Multiplication and zero-delay buffering can reduce the number of discrete oscillator, divider, and buffer stages required around the clock network. The 170 MHz maximum frequency makes the part relevant to mature 5 V digital platforms. Integration still requires careful review of PLL configuration, reference-clock requirements, fanout loading, and the relationship between external timing and the processor's internal clock architecture.
Recomendado
Communications Equipment
The ICS570AI is applicable to communications equipment that needs related clocks distributed across transmit, receive, or data-processing sections. The 170 MHz capability, four outputs, spread-spectrum operation, and zero-delay buffering make it suitable for established clock trees where trace-delay compensation and controlled spectral spreading are valuable. The 4.75 V to 5.25 V operating range supports 5 V digital platforms. Radio-frequency sections should remain on appropriately partitioned supplies, and compliance testing should evaluate the final clock spectrum, harmonics, and conducted or radiated emissions after spread-spectrum settings are fixed.
Recomendado
Industrial Control and Instrumentation
The ICS570AI can support industrial control and instrumentation subsystems that coordinate multiple digital sections from a shared clock source. Its spread-spectrum feature can assist with reducing narrowband emissions in enclosed equipment, while the integrated zero-delay and fanout functions simplify timing distribution. The device must operate from a stable 4.75 V to 5.25 V supply, and its industrial suitability depends on the specific temperature, qualification, and lifecycle requirements of the design. Validate clock accuracy, startup behavior, and EMI margins across line-voltage and environmental conditions.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ICS570AI — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 570A |
|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics |
| Supply Voltage Range | 4.75 V to 5.25 V | 5 V A-version family |
Principais diferenciais
- Exact 170 MHz operating point is identified (vs 570A)
- Documented four-output fanout (vs 570A)
- Complete clock functions in one package (vs 570A)
Notas de projeto
Route all fanout branches from the ICS570AI using short, matched paths and provide a continuous ground reference beneath the clock network. Keep the clock away from switching-regulator inductors, high-current edges, and isolation barriers. Because the zero-delay function compensates for propagation delay within a defined operating region, changing load, trace topology, or output termination can alter edge alignment. Measure skew at the receiver rather than inferring it from nominal buffer delay.
Operate the ICS570AI from a stable source within 4.75 V to 5.25 V. Place the required input and output bypass capacitors close to their associated device pins, with the shortest possible return path to the ground plane. Check supply ripple at the device pin because PLL multiplication and zero-delay operation can amplify timing sensitivity to input phase noise. Use the manufacturer application circuit and recommended capacitor values as the starting point for a specific board revision.
Use the spread-spectrum capability to reduce narrowband clock energy only after confirming the receiver's allowable jitter and modulation behavior. Spectrum, clock-data relationship, and system timing can all be affected by spread settings. Compare conducted and radiated emissions with and without spreading, and verify that downstream circuitry tolerates the resulting timing variation. Keep the modulation configuration controlled and documented across production units.
Do not substitute a 3.3 V B-version device for the 4.75 V to 5.25 V ICS570AI without confirming every electrical and timing requirement. Also avoid assuming that a shared package name guarantees identical pin functions; compare the manufacturer pin-description table, output configuration, feedback arrangement, and enable behavior. The 570A is the closest identified same-family candidate, but its suffix-specific qualification and ordering details must be checked before replacement.
Informações de conformidade
Compliance attributes were not stated in the manufacturer or distributor records for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and qualification status using the current manufacturer product documentation or declaration of conformance.