IPQ6000+QCN5052+QCN5022+QCA8075 - WiFi 6 Dual-Band SoC Solution | Qualcomm
N.º da peça: IPQ6000+QCN5052+QCN5022+QCA8075 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $34.2 | $342,00 |
| 100 | $29.75 | $2.975,00 |
| 500 | $26.4 | $13.200,00 |
| 1.000 | $23.1 | $23.100,00 |
IPQ6000+QCN5052+QCN5022+QCA8075 Visão geral
A Wi-Fi 6 access point SoC solution is a system-on-chip platform that combines an applications processor, dual-band radio transceivers, and an Ethernet switch into a chipset reference that powers next-generation wireless routers, mesh nodes, and enterprise APs. Within the broader silicon taxonomy, the IPQ6000 belongs to the Qualcomm Atheros Immersive Home / Networking Pro family of Wi-Fi SoCs, sitting under the network processor hierarchy that bridges ARM Cortex CPUs with integrated MAC/baseband radios - a class of devices essential for high-throughput, low-latency wireless edge networking.
Key features of the IPQ6000+QCN5052+QCN5022+QCA8075 solution include 2.4 GHz (2x2) + 5.8 GHz (2x2) simultaneous dual-band operation with combined PHY rate up to 1775 Mbps, DFS (Dynamic Frequency Selection) support for radar-aware channel use, and wireless probe plus positioning-engine capability for indoor location services. The QCN5022 and QCN5052 are housed in 100-pin DRQFN packages, and the QCA8075 in a 108-pin DRQFN package, supporting surface-mount PCB integration on compact AP motherboards. The architecture supports up to 16 SSIDs, mesh networking, and cloud-managed deployment.
Technical depth: the IPQ6000's quad-core Cortex-A53 cluster enables hardware-accelerated encryption (IPSec/L2TP), QoS queues, and offloaded packet processing. Combined with the QCA8075 5-port Gigabit switch and the dual-radio QCN5022/QCN5052 front-ends, the solution provides a deterministic low-latency pipeline suitable for industrial-grade WiFi 6 deployments. Compared with older IPQ40xx solutions, the IPQ6000 doubles CPU cores and adds 802.11ax OFDMA/MU-MIMO scheduling on-chip.
Typical applications include industrial Wi-Fi 6 access points, ceiling-mount dual-band APs, coal-mine intrinsically safe wireless gateways, IoT routers with RS485, and SMB/enterprise fat APs. The 1.775 Gbps aggregated throughput makes the platform well-suited to high-density venues, warehouses, and outdoor mesh nodes.
Design consideration: when using this solution, allocate PCB ground planes under each DRQFN-exposed pad for thermal dissipation, and ensure host board routing preserves 100-ohm differential impedance for the 2.4 GHz and 5 GHz RF paths. Verify DFS regional compliance before enabling 5 GHz channels in your deployment country.
This page synthesizes distributor pricing, chipset-level cross-references (e.g., IPQ6010 variant), and design notes not consolidated on the standard Qualcomm product brief.
Alternativas drop-in para IPQ6000+QCN5052+QCN5022+QCA8075 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
IPQ6010+QCN5052+QCN5022+QCA8081
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
IPQ6000+QCN5052+QCN5022+QCA8075
✅ Drop-In✓ Em estoque
$23.1 / unidade
Ver ficha técnica →IPQ6000+QCA8075+QCN5022+QCN5052
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
IPQ5018+QCN6102+QCN6024+QCA8075
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
IPQ6000+QCN5052+QCN5022+QCA8075 Especificações (publicadas pelo fabricante)
| Chipset Architecture | IPQ6000 SoC + QCN5022 (2.4 GHz radio) + QCN5052 (5 GHz radio) + QCA8075 (5-port GbE switch) |
| Application Processor | Qualcomm IPQ6000, quad-core ARM Cortex-A53 64-bit, 1.2 GHz |
| Wi-Fi Standard | IEEE 802.11a/b/g/n/ac/ax (Wi-Fi 6) |
| Frequency Bands | 2.4 GHz to 2.4835 GHz and 5.15 GHz to 5.85 GHz |
| MIMO Configuration | 2x2 dual-band simultaneous |
| Maximum PHY Rate | 1775 Mbps aggregated (1700 Mbps @ 80 MHz 802.11ax) |
| 2.4 GHz Rate | Up to 573.5 Mbps (2x2 802.11ax) |
| 5 GHz Rate | Up to 1200 Mbps (2x2 802.11ax) |
| DFS Support | Yes (Dynamic Frequency Selection) |
| Ethernet Switch | QCA8075, multi-port Gigabit (5-port typical) |
| QCN5022 Package | 100-pin DRQFN (DRQFN100B) |
| QCN5052 Package | 100-pin DRQFN (DRQFN100B) |
| QCA8075 Package | 108-pin DRQFN (108DRQFN) |
| Operating Modes | AP, Client, WDS AP, WDS Client, Mesh, Router |
| Nível MSL | 3 (per Alibaba listing) |
| Packaging Type | Tape & Reel, 1000 pcs/reel |
Interfaces e Conectores do IPQ6000+QCN5052+QCN5022+QCA8075
IPQ6000+QCN5052+QCN5022+QCA8075 expõe as seguintes interfaces e conectores conforme publicado pelo fabricante: Sem fios, Ethernet. A pinagem do header de expansão, a numeração dos pinos do conector e os limites elétricos estão definidos na documentação do fabricante.
| Sem fios | IEEE 802.11a/b/g/n/ac/ax (Wi-Fi 6) |
| Ethernet | QCA8075, multi-port Gigabit (5-port typical) |
Consulte a documentação do fabricante para a pinagem completa do conector de expansão e a numeração dos pinos do conector.
Aplicações típicas
IPQ6000+QCN5052+QCN5022+QCA8075 é adequado para 6 aplicaçãos: Industrial Wi-Fi 6 Ceiling Access Point, Coal-Mine Intrinsically Safe Wireless AP, IoT Wireless Router with RS485, SMB / Enterprise Fat AP & Fit AP, Outdoor Mesh Wi-Fi 6 Node, Industrial Wireless Probe / Positioning AP.
Industrial Wi-Fi 6 Ceiling Access Point
The IPQ6000+QCN5052+QCN5022+QCA8075 is ideal for industrial dual-band ceiling APs because the IPQ6000's quad-core ARM Cortex-A53 1.2 GHz CPU and integrated 2x2 MIMO radios deliver up to 1775 Mbps aggregate throughput with deterministic low latency. According to the Maxon ceiling AP specification, this chipset bundle supports AP/STA mode, mesh, and cloud-managed deployment. QCA8075 provides multi-port GbE backhaul for wired uplinks; DFS support ensures radar-aware 5 GHz channel use in regulated regions.
Recomendado
Coal-Mine Intrinsically Safe Wireless AP
For hazardous-environment Wi-Fi 6 deployments, the IPQ6000+QCN5052+QCN5022+QCA8075 chipset is referenced by the Sailsky BL6000MAX intrinsically safe PCBA mainboard. The IPQ6000 SoC runs AP/Client/Mesh/Router firmware with VLAN tagging and wireless probe capability for personnel positioning, while the QCN5022/QCN5052 dual-band radios operate simultaneously at 2.4 GHz and 5.8 GHz. Industrial-grade temperature tolerance and DFS channel selection support mining-tunnel installations where 5 GHz radar detection is required.
Recomendado
IoT Wireless Router with RS485
The IPQ6000+QCN5052+QCN5022+QCA8075 chipset powers IoT wireless routers with serial-bus integration, including the Sailsky BL6000MAX industrial IoT module with RS485 support. The IPQ6000 quad-core CPU runs Linux/OpenWrt with QoS queues, VPN offload, and Modbus gateways, while the QCN5022/QCN5052 provide 1800 Mbps PHY rate to Wi-Fi clients. QCA8075 supplies GbE WAN/LAN ports for wired equipment alongside the wireless link.
Recomendado
SMB / Enterprise Fat AP & Fit AP
The IPQ6000+QCN5052+QCN5022+QCA8075 supports both fat AP (autonomous) and fit AP (controller-managed) deployment models for small/medium business Wi-Fi 6 rollouts. According to the Maxon MX6012A-MI4 datasheet, the chipset bundle supports up to 128 users per AP with PoE power input, 16 SSIDs, and VLAN tagging. The QCN5052 5 GHz radio with DFS enables safe enterprise channel planning, while the IPQ6000 quad-core CPU handles WPA3-Enterprise encryption offload.
Recomendado
Outdoor Mesh Wi-Fi 6 Node
Outdoor mesh nodes benefit from the IPQ6000+QCN5052+QCN5022+QCA8075 chipset because the IPQ6000 platform supports mesh networking, dynamic frequency selection, and wireless probe/positioning features. According to the Sailsky BL6000MAX spec, the chipset supports 300 m to 1.5 km point-to-point links when paired with external high-gain antennas on the QCN5022/QCN5052 chains. The QCA8075 enables backhaul-over-Ethernet for hybrid wired/wireless mesh topologies.
Recomendado
Industrial Wireless Probe / Positioning AP
The IPQ6000+QCN5052+QCN5022+QCA8075 supports wireless probe and a positioning engine that realises indoor personnel-location services. According to the CSDN IPQ6010 reference design (June 2026) and Sailsky IoT module spec, the chipset's dual-band 2x2 MIMO radio front-end (QCN5022/QCN5052) captures Wi-Fi probe frames from mobile devices, and the IPQ6000 quad-core CPU runs positioning firmware. QCA8075 supplies backhaul to a centralised location server.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para IPQ6000+QCN5052+QCN5022+QCA8075 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | IPQ6010+QCN5052+QCN5022+QCA8081 | IPQ5018+QCN6102+QCN6024+QCA8075 |
|---|---|---|---|
| Chipset Family | IPQ6000+QCN5052+QCN5022+QCA8075 | IPQ6010+QCN5052+QCN5022+QCA8081 | IPQ5018+QCN6102+QCN6024+QCA8075 |
| Brand | Qualcomm | Qualcomm | Qualcomm |
| Package | DRQFN100B (radios) + 108DRQFN (QCA8075) | DRQFN100B (radios) + QCA8081 switch | DRQFN (radios) + 108DRQFN (QCA8075) |
| CPU Cores | Quad-core ARM Cortex-A53 @ 1.2 GHz | Quad-core ARM Cortex-A53 (higher clock) | Dual-core ARM Cortex-A53 (IPQ5018) |
| Maximum PHY Rate | 1775 Mbps aggregated | Similar aggregated throughput, IPQ6010 variant | 3000 Mbps aggregated (Wi-Fi 6E with QCN6102) |
| 2.4 GHz Radio | QCN5022, 2x2 MIMO, 573.5 Mbps | QCN5022, 2x2 MIMO, 573.5 Mbps | QCN6102, 2x2 MIMO, higher throughput (6E) |
| 5 GHz Radio | QCN5052, 2x2 MIMO, 1200 Mbps | QCN5052, 2x2 MIMO, 1200 Mbps | QCN6024, 2x2 MIMO, higher throughput (6E) |
| Ethernet Switch | QCA8075 (5-port GbE) | QCA8081 (upgraded switch) | QCA8075 (same as this product) |
| DFS Support | Yes | Yes | Yes |
Principais diferenciais
- Quad-core Cortex-A53 CPU in same chipset tier (vs IPQ5018+QCN6102+QCN6024+QCA8075)
- Cost-optimised Wi-Fi 6 with mature QCA8075 GbE (vs IPQ6010+QCN5052+QCN5022+QCA8081)
- Industrial-grade DFS and 16-SSID support (vs Consumer Wi-Fi 6 SoCs)
Notas de projeto
The QCN5022 and QCN5052 DRQFN100B packages and the QCA8075 108DRQFN each rely on a centre exposed pad for thermal dissipation. Estimated: with all three companion ICs active simultaneously, host board copper-pour area under each DRQFN exposed pad should be at least 1 square inch of unbroken 2 oz copper to keep junction temperature rise under 35 C in still-air industrial enclosures. Use thermal vias under each pad for vertical heat extraction to inner copper layers.
Preserve 100-ohm differential impedance for the QCN5022 (2.4 GHz) and QCN5052 (5 GHz) RF paths; route RF traces over a continuous ground plane with no splits under the antenna feed lines. Place the IPQ6000 SoC at least 5 mm away from the QCN5022/QCN5052 antenna feeds to minimise digital-noise coupling. Match-length tune the QCA8075 GbE traces to within 150 mil to maintain Ethernet compliance.
Do not mix the IPQ6000+QCN5052+QCN5022+QCA8075 chipset with the IPQ6010+QCA8081 firmware tree - the QCA8075 vs QCA8081 Ethernet switch requires different PHY driver paths. Always enable DFS on the 5 GHz radio only after confirming your deployment country's radar-channel restrictions, otherwise AP boot may stall in regulatory channels. Industrial deployments should confirm operating-temperature variant ordering, since commercial and industrial temperature grades share the same silicon but differ in test screening.
Informações de conformidade
RoHS and lead-free compliance per Alibaba listing attribute 'standard' and Made-in-China platform certifications (ISO9001, RoHS, CE). Industrial-grade temperature variants are available per Alibaba listing MSL=3 rating. REACH, halogen-free and conflict-mineral statements not explicitly published for this chipset bundle; treated as unknown until Qualcomm publishes a formal compliance letter.
