LAN8720A-CP-TR-ABC - 10/100 RMII Ethernet PHY | Microchip
N.º da peça: LAN8720A-CP-TR-ABC ✓ AtivoLAN8720A-CP-TR-ABC Visão geral
An Ethernet PHY is the physical-layer interface between a host controller and twisted-pair Ethernet cabling. Within the network hierarchy, the LAN8720A connects an RMII-capable microcontroller, application processor, or dedicated Ethernet controller to a 10/100 network. It implements full-duplex 10BASE-T and 100BASE-TX operation while supporting HP Auto-MDIX, reducing the need to distinguish straight-through and crossover cabling.
The device supports standard RMII communication and operates at 10 Mbps or 100 Mbps. Its flexible supply range of 1.6 V to 3.6 V permits integration with 1.8 V, 2.5 V, and 3.3 V systems. The 24-SQFN package provides a compact 4 mm by 4 mm footprint for space-constrained embedded products, while its commercial temperature range covers applications from 0°C to +85°C.
Microchip's flexPWR technology is used to reduce power consumption in the LAN8720A family, making the transceiver suitable for connected embedded equipment where energy efficiency is important. The device provides separate digital and analog supply domains, enabling system designers to control supply sequencing and noise isolation according to the manufacturer's application guidance.
Typical uses include industrial Ethernet controllers, consumer network equipment, embedded gateways, set-top boxes, printers, IP cameras, and microcontroller-based network nodes. The LAN8720A is especially useful when a host processor already provides an RMII interface and the design needs a compact, low-power 10/100 copper-Ethernet front end.
PCB implementation should follow the manufacturer's reference layout for the 24-pin SQFN footprint, exposed pad, magnetics, crystal or clock source, and 50-ohm transmission lines. Care is required with analog and digital supply decoupling, Ethernet transformer isolation, and link-partner startup because those details directly affect EMI, cable compliance, and packet-transfer reliability.
This page combines the manufacturer specifications with practical implementation guidance, interface requirements, temperature distinctions, and same-footprint replacement considerations. It is intended to help engineers identify whether the LAN8720A-CP-TR-ABC matches a board's electrical, mechanical, and environmental requirements before layout release or production sourcing.
Alternativas drop-in para LAN8720A-CP-TR-ABC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LAN8720A-CP-TR-ABC (mesmo formato e footprint) — diferindo em Auto-MDIX, Product Type, Host Interface, Number of Transceivers, Operating Temperature Range.
LAN8720AI-CP-TR-ABC
✅ Drop-InConsulte o preço
Ver ficha técnica →KSZ8081RNACA
✅ Drop-InConsulte o preço
Ver ficha técnica →LAN8720A-CP-ABC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LAN8720A-CP-TR-ABC Especificações
| Product Type | 10/100 Ethernet physical-layer transceiver |
| Ethernet Standards | 10BASE-T and 100BASE-TX |
| Data Rates | 10 Mbps and 100 Mbps |
| Host Interface | RMII |
| Duplex Support | Full duplex |
| Auto-MDIX | HP Auto-MIDX support |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Supported Supply Levels | 1.8 V, 2.5 V, and 3.3 V |
| Faixa de temperatura de operação | 0°C to +85°C |
| Package Type | 24-pin SQFN |
| Package Dimensions | 4 mm x 4 mm |
| Package Height | 0.9 mm |
| Lead Count | 24 pins |
| Tipo de montagem | Surface mount |
| Packing Media | Tape and reel |
| Manufacturer Reel Quantity | 5,000 units |
| Status RoHS | Compliant |
| Halogen Maximum Concentration | Per IEC 61249-2-21 |
| Power Management Technology | Microchip flexPWR technology |
| Status do ciclo de vida | Active |
Guia de Configuração de Pinos do LAN8720A-CP-TR-ABC 0.9 mm
Configuração de pinos para LAN8720A-CP-TR-ABC (pacote 0.9 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para LAN8720A-CP-TR-ABC.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
LAN8720A-CP-TR-ABC é adequado para 6 aplicaçãos: Industrial Ethernet Controller, Consumer Network Gateway, IP Camera and Security Device, Embedded IoT Device, Printer and HMI, Set-Top and Network Appliance.
Industrial Ethernet Controller
The LAN8720A-CP-TR-ABC fits an industrial embedded controller that connects a host processor to 10BASE-T or 100BASE-TX cabling through RMII. Its 1.6 V to 3.6 V supply range supports 1.8 V, 2.5 V, and 3.3 V system rails, while the 4 mm by 4 mm SQFN package limits PCB area. The commercial 0°C to +85°C rating is appropriate for controlled indoor equipment, but it must not be assumed suitable for exposed outdoor cabinets. Use the manufacturer reference layout, separate analog and digital supply filtering, and the specified Ethernet magnetic network to preserve signal and EMI performance.
Recomendado
Consumer Network Gateway
The LAN8720A-CP-TR-ABC can provide the copper-Ethernet port in a compact consumer gateway, media adapter, or smart-home edge node. The RMII interface keeps the host connection standardized, and the PHY supports both 10 Mbps and 100 Mbps links with full-duplex operation. Its low-power flexPWR-based design is useful for continuously connected products, while HP Auto-MIDX simplifies cable compatibility. The compact 24-SQFN footprint supports dense consumer-electronics construction, although a separate Ethernet transformer and correctly terminated magnetics remain necessary for physical-layer isolation.
Recomendado
IP Camera and Security Device
The LAN8720A-CP-TR-ABC is suitable for an IP camera or surveillance peripheral requiring a low-speed 10/100 Ethernet link for control, image transport, and network management. The 24-SQFN package leaves board area for sensors and storage, and the 1.6 V to 3.6 V operating range allows common embedded supply rails to be reused. Because Ethernet magnetics and high-speed clock distribution can inject noise into adjacent image circuitry, follow the manufacturer's decoupling and layout recommendations. The 0°C to +85°C commercial range suits indoor camera installations but requires a different temperature option for unheated outdoor locations.
Recomendado
Embedded IoT Device
The LAN8720A-CP-TR-ABC adds wired Ethernet connectivity to an embedded IoT node that already has an RMII-capable processor. It can negotiate 10BASE-T or 100BASE-TX operation and uses HP Auto-MIDX to simplify connection to either straight-through or crossover cabling. The compact 24-pin SQFN package and low-power operation are valuable in compact IoT controllers. Designers should reserve clean 50-ohm differential routing, use the manufacturer-prescribed crystal or clock arrangement, and verify startup behavior between the host, PHY, and Ethernet magnetic component. The device is not a wireless radio and does not itself provide an IoT radio interface.
Recomendado
Printer and HMI
The LAN8720A-CP-TR-ABC can provide network connectivity for an industrial printer, touch-screen HMI, or local operator panel using 10BASE-T or 100BASE-TX Ethernet. A full-duplex RMII PHY supports efficient local traffic and management communications without requiring a gigabit PHY. The 4 mm by 4 mm package is useful where control electronics are constrained by display and power-supply area, and its 0°C to +85°C range fits many indoor industrial products. Place the PHY close to the RJ45 connector and Ethernet transformer, maintain controlled differential impedance, and keep switching regulators and digital clocks away from the analog PHY and magnetics.
Recomendado
Set-Top and Network Appliance
The LAN8720A-CP-TR-ABC is well suited to set-top boxes, thin clients, and compact network appliances that need a 10/100 copper-Ethernet port for management, software updates, or media traffic. Its RMII host interface supports efficient integration with Ethernet-capable application processors, while the 24-SQFN package helps maintain compact dimensions. The device supports 1.8 V to 3.3 V rails within its stated 1.6 V to 3.6 V range, allowing shared supply architecture when system timing permits. Thermal and EMI design should account for adjacent high-speed processors, Ethernet transformers, and switching supplies; use the manufacturer's reference layout rather than treating the PHY as a generic Ethernet connector controller.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LAN8720A-CP-TR-ABC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LAN8720AI-CP-TR-ABC | KSZ8081RNACA | LAN8720A-CP-ABC |
|---|---|---|---|---|
| Package | 24-SQFN (4x4 mm) | 24-SQFN (4x4 mm) | 24-QFN (4x4 mm) | 24-SQFN (4x4 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Data Rates | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Host Interface | RMII | RMII | RMII | RMII |
| Supply Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Packing Media | Tape and reel | Tape and reel | Tape and reel | Tray |
Principais diferenciais
- Commercial 0°C to +85°C rating matches the specified ordering code (vs LAN8720AI-CP-TR-ABC)
- Compact 24-pin, 4 mm by 4 mm RMII PHY footprint (vs KSZ8081RNACA)
- Exact commercial-temperature LAN8720A family configuration (vs LAN8720A-CP-ABC)
Notas de projeto
Use Microchip's LAN8720A/LAN8720Ai reference layout for the 24-SQFN footprint, exposed pad, crystal or clock circuit, analog supply, and digital I/O. Place the PHY near the Ethernet transformer and RJ45 connector, and route TX and RX differential pairs as controlled-impedance, tightly coupled traces with continuous return paths. Avoid placing switching-regulator loops, high-speed clocks, or digital routing beneath the exposed pad.
Provide the analog and digital supplies separately as shown in the manufacturer application guidance, with local high-frequency bypass capacitors placed at the relevant pins and stable bulk capacitance near the device. Account for startup sequencing between the RMII host and PHY. The supported 1.6 V to 3.6 V range permits common embedded rails, but each rail's noise, rise time, and operating point must still be checked against the datasheet limits.
Keep the Ethernet magnetics and PHY analog section away from switching power stages, oscillators, and high-current digital loads. Follow the specified magnetic-component layout, maintain symmetrical differential routing, and use the designated exposed-pad connection. A common PCB error is routing the clock trace beneath the analog PHY area; clock and Ethernet pairs should instead follow short, separated reference paths with minimal vias.
Do not select a 24-lead alternative solely from package count. Before replacing the LAN8720A-CP-TR-ABC, verify pin names, exposed-pad geometry, reference-clock requirements, PHY address straps, interrupt polarity, power sequencing, magnetic-network values, and startup timing. The KSZ8081RNACA is a comparable 24-QFN RMII PHY, but its device-specific implementation requirements still require a complete schematic and layout review.
Informações de conformidade
Microchip's LAN8720A/LAN8720Ai datasheet identifies the 24-pin QFN lead-free option as RoHS compliant and states that it meets the halogen maximum concentration values per IEC 61249-2-21. AEC-Q100 qualification, REACH status, and conflict-minerals status were not established for this ordering code.