LIFCL-40-9MG289C - CrossLink-NX 39K LUT FPGA, 289-TFBGA | Lattice
N.º da peça: LIFCL-40-9MG289C ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.2 | $252,00 |
| 100 | $21.95 | $2.195,00 |
| 500 | $18.4 | $9.200,00 |
| 1.000 | $15.75 | $15.750,00 |
LIFCL-40-9MG289C Visão geral
What is a CrossLink-NX FPGA? An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic fabric, interconnect, and I/O can be reconfigured after manufacturing by the customer. The CrossLink-NX family belongs to the broader category of programmable logic devices (PLDs), which also includes CPLDs. FPGAs sit within the integrated circuit taxonomy as follows: FPGA -> programmable logic -> logic IC -> integrated circuit. CrossLink-NX specifically targets low-power embedded vision bridging, providing hard MIPI D-PHY/CSI-2 cores, hardened memory controllers, and a high-performance fabric for sensor aggregation.
Key features include up to 75% lower power compared to similar FPGAs in its class, 2.5G MIPI D-PHY/CSI-2 hard cores enabling direct connection to image sensors and displays, embedded block RAM, distributed SRAM, and on-chip DSP slices. The Nexus platform also provides high reliability for mission-critical applications including automotive and industrial segments.
The architecture combines a small-form-factor 289-ball TFBGA package with hardened I/O, allowing PCB designs to keep sensor and display trace lengths short. Designers benefit from Lattice Radiant software support and pre-built IP libraries for MIPI bridging, display controllers, and image signal processing pipelines.
Typical applications include embedded vision bridging for camera sensors, AI inference at the edge, machine vision in industrial automation, AR/VR head-mounted displays, and video aggregation/duplication for surveillance and automotive infotainment.
When designing with this part, ensure PCB layout follows the BGA escape pattern documented in the Lattice hardware manual and that decoupling capacitors are placed directly under the package balls for clean power delivery to the fabric.
This page synthesizes distributor stock, drop-in same-family alternatives, and design notes not found in the manufacturer datasheet. All information reflects availability as of 2026-10-10.
Alternativas drop-in para LIFCL-40-9MG289C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LIFCL-40-9MG289C (mesmo formato e footprint) — diferindo em Mounting Type, Operating Temperature, Package, Series.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
LIFCL-40-9MG289I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LIFCL-40-7MG289C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
LIFCL-40-8MG289C
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$25.1 / unidade
Ver ficha técnica →LIFCL-40-9MG289C Classificações máximas e características elétricas
| Product Family | CrossLink-NX |
| Series | LIFCL |
| Logic Elements | 39000 |
| Embedded Memory Bits | 1548288 |
| Number of I/O | 180 |
| Encapsulamento | 289-TFBGA (CSBGA) |
| Tipo de montagem | Surface Mount |
| Terminal Form | Ball |
| Number of Terminals | 289 |
| Package Code | TFBGA |
| Temperatura de operação | 0C to +85C (commercial) |
| MIPI D-PHY Speed | 2.5 Gbps |
| MIPI Hard Cores | CSI-2 RX/TX |
| Platform | Lattice Nexus |
| Configuration Method | SRAM (volatile, external flash) |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do LIFCL-40-9MG289C tfbga
Configuração de pinos para LIFCL-40-9MG289C (pacote tfbga). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para LIFCL-40-9MG289C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
LIFCL-40-9MG289C é adequado para 6 aplicaçãos: Embedded Vision Sensor Aggregation, Industrial Machine Vision, AR/VR Head-Mounted Displays, Automotive Infotainment Video Routing, Surveillance Video Aggregation, AI Edge Inference Pre-Processing.
Embedded Vision Sensor Aggregation
The LIFCL-40-9MG289C is purpose-built for embedded vision sensor aggregation. Its hard 2.5 Gbps MIPI D-PHY cores allow direct connection to CSI-2 image sensors without external PHY chips, while 180 user I/O enable multi-sensor fan-in. The 39000 logic elements and 1548288 bits of embedded memory support real-time image processing pipelines. Compared to an MCU + external PHY approach, the LIFCL-40-9MG289C reduces PCB area by integrating PHY, fabric, and memory in a single 289-TFBGA. Designers typically place the part close to the sensor connectors to minimize MIPI trace length and use Lattice Radiant IP for sensor-to-memory paths.
Recomendado
Industrial Machine Vision
In industrial machine vision, the LIFCL-40-9MG289C aggregates multiple image sensors on a production line, performs pre-processing (debayer, gamma, edge detection), and forwards frames to a host SoC. The Nexus platform's low-power envelope (up to 75% lower than competing FPGAs per Lattice datasheet) allows fan-less enclosure designs, while the 289-TFBGA package fits small camera head PCBs. For harsher environments the LIFCL-40-9MG289I industrial variant is preferred; the commercial C-grade part is widely used in factory-floor indoor equipment. Soft DSP IP handles line-scan trigger synchronization.
Recomendado
AR/VR Head-Mounted Displays
The LIFCL-40-9MG289C bridges camera and display MIPI links in AR/VR head-mounted displays. Its 2.5 Gbps D-PHY lanes connect directly to inside-out tracking cameras and to display driver ICs, while the 39000 LUT fabric runs sensor-fusion glue logic. The Nexus platform's sub-1W operation extends untethered runtime versus competitive FPGAs. Latency through the FPGA is deterministic due to hard PHY cores and pipeline fabric, critical for VR motion-to-photon timing budgets. Typical designs pair the FPGA with an external OLED driver over CSI-2/DSI.
Recomendado
Automotive Infotainment Video Routing
The LIFCL-40-9MG289C supports automotive infotainment video routing by aggregating driver-assistance cameras, navigation displays, and rear-seat entertainment feeds. Although the C-grade is commercial temperature, the LIFCL-40-9MG289I industrial variant handles cabin temperatures. The hard CSI-2 cores reduce BOM by replacing external bridge chips. Designers use Lattice reference designs for camera-to-display replication and mirroring. The Nexus platform's high SEU tolerance suits automotive mission profiles when paired with proper watchdog supervision.
Recomendado
Surveillance Video Aggregation
The LIFCL-40-9MG289C aggregates multiple surveillance cameras into a single recording stream. Each CSI-2 RX core accepts up to 4 lanes at 2.5 Gbps, and the 289-TFBGA package supports enough ball count for 4+ camera inputs plus output to a host NVR. Embedded block RAM buffers frames for de-encryption and watermarking before forwarding. Compared to an ASSP, the CrossLink-NX adds custom analytics glue logic and future-proofs designs for evolving codec requirements.
Recomendado
AI Edge Inference Pre-Processing
The LIFCL-40-9MG289C pre-processes sensor data before AI inference at the edge. Its hard MIPI cores ingest raw camera frames, and the 39000 LUT fabric runs image resizing, normalization, and quantization before forwarding tensors to a dedicated NPU. The Nexus platform's low power envelope (up to 75% lower than competitors per Lattice datasheet) keeps thermal budgets manageable in compact edge-AI enclosures. Designs pair this FPGA with external LPDDR4 memory for tensor buffering.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LIFCL-40-9MG289C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LIFCL-40-9MG289I | LIFCL-40-7MG289C | LIFCL-40-8MG289C |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 289-TFBGA (CSBGA) | 289-TFBGA (CSBGA) - same | 289-TFBGA (CSBGA) - same | 289-TFBGA (CSBGA) - same |
| Logic Elements | 39000 | 39000 | 39000 | 39000 |
| Embedded Memory (bits) | 1548288 | 1548288 | 1548288 | 1548288 |
| User I/O | 180 | 180 | 180 | 180 |
| MIPI D-PHY Speed | 2.5 Gbps | 2.5 Gbps | 2.5 Gbps | 2.5 Gbps |
| Temperature Range | 0C to +85C (commercial) | -40C to +100C (industrial) | 0C to +85C (commercial) | 0C to +85C (commercial) |
| Speed Grade | -9 | -9 | -7 | -8 |
Principais diferenciais
- Hard 2.5 Gbps MIPI D-PHY cores integrated (vs Microchip PolarFire MPF300T)
- Up to 75% lower power than competing FPGAs (vs Generic mid-density FPGA competitors)
- Direct industrial temperature drop-in variant (vs LIFCL-40-9MG289C commercial version)
Notas de projeto
BGA escape routing for the 289-ball TFBGA requires careful via-in-pad or microvia design. Use 0.4 mm ball pitch escape patterns following the Lattice hardware manual reference design. Place 0.1uF decoupling capacitors directly under the BGA on the opposite PCB layer to keep inductance below 1 nH per Lattice application guidance.
The CrossLink-NX platform requires separate VCC_CORE, VCCO bank, and VCCAUX rails per the datasheet. Each rail needs its own decoupling network (10uF bulk + 0.1uF + 1uF ceramic). Inrush current during configuration can exceed 1A peak; size upstream regulators accordingly and add soft-start circuitry to prevent brown-out of downstream SoCs.
MIPI D-PHY traces at 2.5 Gbps require 100-ohm differential impedance with intra-pair skew under 5 ps per Lattice hardware manual. Keep MIPI traces on the top layer directly under the BGA escape, with continuous ground reference and length matching within 0.13 mm. Avoid splitting reference planes beneath the MIPI area.
Do not assume the LIFCL-40-9MG289C is industrial temperature rated - the C-suffix denotes commercial grade only. For -40C to +100C operation, substitute the LIFCL-40-9MG289I which is the drop-in industrial variant. Lattice Radiant project files can be ported between C and I grades with no HDL changes.
Informações de conformidade
RoHS and lead-free per Lattice product page; commercial temperature grade is not AEC-Q100 qualified - choose LIFCL-40-9MG289I for industrial use cases.
