LPC11E66JBD48E - 50MHz Cortex-M0+ MCU 64KB Flash | NXP
N.º da peça: LPC11E66JBD48E ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.18 | $4,18 |
| 10 | $3.62 | $36,20 |
| 100 | $2.91 | $291,00 |
| 500 | $2.48 | $1.240,00 |
| 1.000 | $2.15 | $2.150,00 |
LPC11E66JBD48E Visão geral
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, peripherals, and I/O. The ARM Cortex-M0+ is ARM's smallest and most energy-efficient Cortex-M core, designed for deterministic embedded control. Loaders live in the broader hierarchy: Cortex-M0+ -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The LPC11Exx family targets applications transitioning from 8/16-bit MCUs by providing modern performance with familiar low-pin-count packages.
Key features include a 12-bit ADC for sensor digitization, multiple serial interfaces (USART, SPI, I2C), PWM outputs for motor or LED control, and configurable GPIO. The integrated EEPROM (4 KB) eliminates the need for an external non-volatile memory chip for parameter storage, lowering BOM count. The 50 MHz CPU frequency provides ample headroom for protocol stacks and real-time control loops.
Architecturally, the LPC11E66 uses the Cortex-M0+ core paired with a configurable AHB bus matrix, low-power peripherals, and a programmable ROM-based boot loader that supports in-system programming via UART or USB ISP. This combination allows field firmware upgrades without external programmers, which is valuable for deployed industrial and consumer products.
Typical applications include home appliances, white goods, motor control peripherals, building automation nodes, low-cost sensor hubs, and consumer electronics requiring USB or CAN connectivity through on-chip interfaces. The wide operating voltage range (typically 1.8V-3.6V core) supports battery-powered devices.
When designing with this MCU, ensure the decoupling network uses 100 nF X7R ceramics on each VDD/VDDA pin placed within 2 mm of the pad. Leave the ISP entry pin accessible (typically PIO0_1) to enable in-field firmware updates without disassembly.
This page synthesizes distributor pricing, drop-in alternatives from NXP LPC11Exx family, and practical design notes not consolidated in the manufacturer datasheet, giving procurement and engineering teams a single reference for the LPC11E66JBD48E.
Alternativas drop-in para LPC11E66JBD48E — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
LPC11E67JBD48E
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LPC11E68JBD48E
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LPC11U67JBD48E
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LPC11U68JBD48E
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LPC11C24FBD48/301
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LPC1227FBD48/301
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LPC11E66JBD48E Classificações máximas e características elétricas
| Product Type | 32-bit ARM Microcontroller (MCU) |
| Core Architecture | ARM Cortex-M0+ |
| CPU Frequency (max) | 50 MHz |
| Program Flash Memory | 64 KB (64K x 8) |
| SRAM | 12 KB |
| On-chip EEPROM | 4 KB |
| ADC | 12-bit |
| Encapsulamento | 48-LQFP (7x7 mm) |
| Contagem de pinos | 48 |
| Tipo de montagem | Surface Mount |
| Operating Voltage (typical) | 1.8 V to 3.6 V |
| Temperatura de operação | -40C to +85C (industrial) |
| Nível MSL | 3 |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do LPC11E66JBD48E
| Pino 1 | PIO1_5/USB_VBUS — GPIO or USB VBUS sense (USB-capable variants only) |
| Pino 2 | PIO1_6/USB_CONNECT — GPIO or USB connect indicator (USB-capable variants only) |
| Pino 3 | PIO1_7 — General-purpose I/O |
| Pino 4 | PIO0_23 — General-purpose I/O |
| Pino 5 | PIO0_22 — General-purpose I/O |
| Pino 6 | PIO0_21 — General-purpose I/O |
| Pino 7 | PIO0_20 — General-purpose I/O |
| Pino 8 | VDD — Core supply voltage (3.3 V typical) |
| Pino 9 | PIO0_19 — General-purpose I/O |
| Pino 10 | PIO0_18 — General-purpose I/O |
| Pino 11 | PIO0_17 — General-purpose I/O |
| Pino 12 | PIO0_16 — General-purpose I/O |
| Pino 13 | PIO0_15 — General-purpose I/O |
| Pino 14 | PIO0_14 — General-purpose I/O |
| Pino 15 | PIO0_13 — General-purpose I/O |
| Pino 16 | PIO0_12 — General-purpose I/O |
| Pino 17 | PIO0_11 — General-purpose I/O |
| Pino 18 | VSS — Ground |
| Pino 19 | PIO0_10 — General-purpose I/O |
| Pino 20 | PIO0_9 — General-purpose I/O |
| Pino 21 | PIO0_8 — General-purpose I/O |
| Pino 22 | PIO0_7 — General-purpose I/O |
| Pino 23 | PIO0_6 — General-purpose I/O |
| Pino 24 | PIO0_5 — General-purpose I/O |
| Pino 25 | PIO0_4 — General-purpose I/O |
| Pino 26 | PIO0_3 — General-purpose I/O |
| Pino 27 | PIO0_2 — General-purpose I/O |
| Pino 28 | PIO0_1/ISP_ENTRY — GPIO / ISP entry pin for bootloader |
| Pino 29 | PIO0_0 — General-purpose I/O |
| Pino 30 | RESET — Active-low reset input |
| Pino 31 | VREF — ADC voltage reference |
| Pino 32 | VDDA — Analog supply voltage |
| Pino 33 | VSSA — Analog ground |
| Pino 34 | ADC0 — Analog-to-digital converter input 0 |
| Pino 35 | ADC1 — Analog-to-digital converter input 1 |
| Pino 36 | ADC2 — Analog-to-digital converter input 2 |
| Pino 37 | ADC3 — Analog-to-digital converter input 3 |
| Pino 38 | ADC4 — Analog-to-digital converter input 4 |
| Pino 39 | ADC5 — Analog-to-digital converter input 5 |
| Pino 40 | ADC6 — Analog-to-digital converter input 6 |
| Pino 41 | ADC7 — Analog-to-digital converter input 7 |
| Pino 42 | XTALIN — Crystal oscillator input |
| Pino 43 | XTALOUT — Crystal oscillator output |
| Pino 44 | VDD — Core supply voltage (3.3 V typical) |
| Pino 45 | VSS — Ground |
| Pino 46 | PIO1_0 — General-purpose I/O |
| Pino 47 | PIO1_1 — General-purpose I/O |
| Pino 48 | PIO1_2 — General-purpose I/O |
Aplicações típicas
LPC11E66JBD48E é adequado para 6 aplicaçãos: Industrial Sensor Hubs and Building Automation, Home Appliance Control Boards, Low-Cost Consumer Electronics and Peripherals, USB Dongles and Connectivity Bridges (with LPC11U sibling), Wired Sensor Nodes with Modbus RTU, White Goods User Interface Boards.
Industrial Sensor Hubs and Building Automation
The LPC11E66JBD48E fits industrial sensor hub and building automation designs because its 12-bit ADC and Cortex-M0+ core can digitize multiple analog sensor inputs while running Modbus or BACnet protocol stacks within 64 KB flash. The 12 KB SRAM is sufficient for protocol buffering, and the integrated 4 KB EEPROM stores calibration constants without external memory. The 50 MHz CPU provides real-time response, while the 48-LQFP package is well-suited to industrial -40C to +85C environments, making it ideal for wired sensor aggregators in HVAC and lighting control panels.
Recomendado
Home Appliance Control Boards
The LPC11E66JBD48E is well-suited to home appliance control boards such as washing machines, dishwashers, and refrigerators, where it can drive PWM-controlled motors and read user-interface inputs through its on-chip timers and ADC. The Cortex-M0+ running at 50 MHz provides deterministic real-time control for motor commutation, and the 64 KB flash is sufficient for the main control loop plus user-interface firmware. Compared to 8/16-bit MCUs it saves power through its modern low-leakage process, and the 4 KB EEPROM stores user settings and diagnostic logs without external memory.
Recomendado
Low-Cost Consumer Electronics and Peripherals
The LPC11E66JBD48E fits low-cost consumer electronics peripherals such as keyboard controllers, gaming accessories, and remote controls, where its compact 48-LQFP (7x7) footprint, USB-capable variants in the same family, and 50 MHz Cortex-M0+ deliver modern performance at low BOM cost. The integrated 4 KB EEPROM allows storing user preferences and key mappings without external memory, while the low-power run modes support battery operation in handheld devices. Compared to 8-bit alternatives, the Cortex-M0+ reduces code size and supports modern C compilers.
Recomendado
USB Dongles and Connectivity Bridges (with LPC11U sibling)
The LPC11U67JBD48E (same 48-LQFP footprint, integrated USB) bridges to designs centered on the LPC11E66JBD48E, enabling USB dongles, HID peripherals, and connectivity bridges that speak USB device on one side and SPI/UART sensors on the other. The shared 48-LQFP (7x7 mm) footprint means the same PCB layout supports either part, letting designers keep the same board for both wired and USB variants. The 64 KB flash / 12 KB SRAM / 4 KB EEPROM specification provides ample headroom for USB stacks like CDC, HID, and vendor interfaces.
Recomendado
Wired Sensor Nodes with Modbus RTU
The LPC11E66JBD48E is well-suited to wired Modbus RTU sensor nodes in industrial networks. Its on-chip USARTs drive RS-485 transceivers directly, the 12-bit ADC digitizes analog sensors, and the 50 MHz Cortex-M0+ executes the Modbus stack within 64 KB flash. The integrated 4 KB EEPROM holds Modbus configuration registers and calibration data, eliminating the need for an external non-volatile memory chip. Compared to 8-bit MCUs, the Cortex-M0+ provides higher code density and the modern C compiler ecosystem simplifies firmware development.
Recomendado
White Goods User Interface Boards
The LPC11E66JBD48E suits white-goods user-interface boards, where it scans capacitive touch or matrix keypads through its GPIO and ADC, drives LED indicators via PWM, and communicates with the main appliance controller over UART or SPI. Its low power consumption extends standby time, the 4 KB EEPROM stores user preferences (selected programs, language) across power cycles, and the 48-LQFP (7x7) package simplifies hand-prototyping and rework during development. The industrial temperature grade -40C to +85C supports the harsh environment of kitchen and laundry appliances.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LPC11E66JBD48E — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LPC11E67JBD48E | LPC11E68JBD48E | LPC11U67JBD48E | LPC11U68JBD48E | LPC11C24FBD48/301 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0 |
| CPU Frequency (max) | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB | 256 KB | 128 KB | 256 KB | 32 KB |
| SRAM | 12 KB | 12 KB | 12 KB | 12 KB | 12 KB | 8 KB |
| USB 2.0 | No | No | No | Yes (Device) | Yes (Device) | No |
| CAN | No | No | No | No | No | Yes (C-CAN) |
Principais diferenciais
- Integrated 4 KB on-chip EEPROM (vs LPC11E68JBD48E)
- Mature 64 KB flash reference for legacy code reuse (vs LPC11C24FBD48/301)
- Cortex-M0+ core with deterministic single-cycle I/O (vs LPC1227FBD48/301)
- No integrated USB on this part - choose LPC11U67 for USB (vs LPC11U67JBD48E)
Notas de projeto
Decouple each VDD/VDDA pin with a 100 nF X7R ceramic capacitor placed within 2 mm of the pad, plus a bulk 4.7 uF tantalum or ceramic near the regulator output. The LPC11E66's analog VREF pin should be bypassed with a 100 nF + 10 uF pair to keep ADC noise below 1 LSB at 12-bit resolution. Per NXP's LPC11E6x user manual, noisy digital and analog grounds should connect at a single point under the IC.
Ensure the ISP entry pin (PIO0_1) remains accessible at board level (test pad or unpopulated header) so that in-field firmware updates via UART ISP can be performed without disassembly. The reset pin must be pulled up with at least 10 kohm and decoupled with 100 nF; floating reset is the most common cause of in-circuit boot failures on LPC11Exx designs. Do not drive PIO0_1 low at power-up unintentionally, or the ROM bootloader will enter ISP mode.
Route the 12 MHz crystal traces (XTALIN/XTALOUT) as short differential traces with ground shielding on both sides; keep crystal within 5 mm of the IC and guard the traces with a continuous ground pour. The ADC analog inputs (ADC0-ADC7) should be routed away from switching nodes, with VREF and VDDA traces wide enough to keep voltage drop below 10 mV at the ADC reference load.
Informações de conformidade
RoHS and lead-free status per NXP product page; halogen-free status not explicitly confirmed in the verified data. Industrial temperature grade -40C to +85C supports automotive-adjacent applications but AEC-Q100 is not applicable to the standard LPC11E66JBD48E.