NXP Semiconductors

LPC1342FHN33 - 72MHz Cortex-M3 MCU | NXP Semiconductors

N.º da peça: LPC1342FHN33 ✓ Ativo
2.0 V to 3.6 V Vdss 33-terminal HVQCCN Package 72 MHz Speed Up to 32 kB Memory
MOQ: 1 |

LPC1342FHN33 Visão geral

NXP Semiconductors LPC1342FHN33 is a 32-bit Arm Cortex-M3 microcontroller for embedded applications, with a maximum clock speed of 72 MHz, up to 32 kB of flash memory, and up to 8 kB of SRAM in a 33-terminal 7 mm × 7 mm HVQFN package. It operates from 2.0 V to 3.6 V and includes USB device connectivity for connected peripheral designs.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one compact device. The LPC1342FHN33 belongs to the Arm Cortex-M3 microcontroller family, a low-power embedded-processing category widely used for control, communications, sensing, and human-interface applications. Its integrated architecture reduces the component count and board area needed for a compact embedded controller.

The principal features of the LPC1342FHN33 include its 32-bit Cortex-M3 processing core, 72 MHz maximum operating frequency, and as much as 32 kB of on-chip flash for firmware. Up to 8 kB of SRAM supports working memory, while integrated USB device functionality can simplify connection to a host controller. The 2.0 V to 3.6 V operating range is suitable for 3.3 V embedded systems when the power supply and signal levels are designed accordingly.

The Cortex-M3 core uses a three-stage pipeline and Harvard architecture, as described by NXP Semiconductors. These architectural characteristics support efficient instruction execution in compact embedded systems. The part combines general-purpose control with serial communications and USB connectivity, allowing firmware to handle peripheral control, data acquisition, protocol handling, and firmware updates within a single integrated device.

Typical applications include USB-connected industrial controls, compact data-acquisition systems, building and access-control equipment, portable instruments, and embedded USB peripherals. The 33-terminal HVQFN package also supports space-constrained designs, although its fine pitch requires careful PCB layout and inspection. Exact peripheral assignments and exposed-pin functions should be confirmed against the manufacturer's pin-description table before a footprint is released for production.

For a new design, check the selected baud-rate accuracy, USB clock requirements, flash programming method, and peripheral pin multiplexing before committing the PCB. The 2.0 V minimum operating voltage also requires attention during power-up, brownout, and USB-suspend transitions. Use the manufacturer datasheet's power, decoupling, and layout recommendations to establish a stable reference and clean high-speed signal environment.

This product page consolidates the LPC1342FHN33 specifications, package constraints, sourcing information, and engineering selection guidance. It also distinguishes confirmed device characteristics from design details that must be checked in the complete datasheet, helping engineers evaluate the MCU without relying on abbreviated catalog descriptions.

Alternativas drop-in para LPC1342FHN33 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

LPC1343FHN33

✅ Drop-In ⚠️ Especificações não verificadas
📦 33-terminal HVQCCN
Same-package family member with broader USB capability; clock, memory, and voltage must be confirmed against the target specification before substitution.

📋 Alternativa de referência (fora do catálogo)

LPC1341FHN33

✅ Drop-In ⚠️ Especificações não verificadas
📦 33-terminal HVQCCN
Same-package family alternative with lower performance and a reduced peripheral set compared with the 72 MHz LPC1342FHN33.

📋 Alternativa de referência (fora do catálogo)

LPC1342FHN33 Classificações máximas e características elétricas

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M3
Maximum Clock Speed 72 MHz
Flash Memory Up to 32 kB
SRAM Up to 8 kB
Architecture Harvard architecture with 3-stage pipeline
Tensão de alimentação de operação 2.0 V to 3.6 V
USB Connectivity USB device
I/O Port Count 40 ports
Programmable I/O Lines 25 lines
Analog-to-Digital Converter Present
Package Type 33-terminal HVQCCN
Package Dimensions 7 mm × 7 mm
Package Height 1.40 mm
Tipo de montagem Surface mount
Status do ciclo de vida Active

Guia de Configuração de Pinos do LPC1342FHN33 1.40 mm

Configuração de pinos para LPC1342FHN33 (pacote 1.40 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 1.40 mm para LPC1342FHN33

Nenhum dado detalhado de pinagem disponível para LPC1342FHN33.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

LPC1342FHN33 é adequado para 6 aplicaçãos: USB-connected industrial control, Portable measurement and instrumentation, Building and access-control equipment, USB data-acquisition device, Embedded USB peripheral and dongle, Compact environmental sensor node.

🏭

USB-connected industrial control

The LPC1342FHN33 fits compact USB-enabled control modules because its Arm Cortex-M3 core operates at up to 72 MHz while integrating up to 32 kB of flash, up to 8 kB of SRAM, and USB device connectivity. A device can use the USB interface for configuration, logging, or host commands while dedicated I/O handles sensors and actuators. The 2.0 V to 3.6 V operating range supports 3.3 V system designs, but USB signal integrity, bus-power requirements, and exposed-pin assignments must follow the manufacturer reference design and layout guidance.

🔧

Portable measurement and instrumentation

The 72 MHz Cortex-M3 performance of the LPC1342FHN33 provides useful margin for portable instruments that combine signal acquisition, control logic, and a USB data path. Its integrated flash supports embedded firmware, while up to 8 kB of SRAM provides working memory for short acquisition and processing tasks. The ADC and programmable I/O can be used for monitoring, although the exact converter resolution, sampling rate, channel count, and acquisition timing require confirmation from the complete datasheet. Low-power design should also be evaluated against the device’s specified sleep and operating currents.

🧩

Building and access-control equipment

The LPC1342FHN33 is appropriate for compact access-control nodes that coordinate readers, lock mechanisms, indicators, and a USB-connected configuration interface. Its 32-bit Cortex-M3 core at up to 72 MHz can execute protocol handling and real-time control tasks, while the integrated memory reduces the need for external components. The 25 reported programmable I/O lines offer useful interface capacity, but multiplexed functions must be assigned against the 33-terminal pin table. Production designs should also account for 2.0 V minimum operation, power-loss behavior, and the need for secure firmware update procedures.

📟

USB data-acquisition device

The LPC1342FHN33 can serve as the control processor in a compact USB data-acquisition device by combining a fast 32-bit core, on-chip program and working memory, and a USB device interface. The MCU can coordinate sensor sampling, buffering, configuration commands, and data transfer without requiring a separate USB controller. Its ADC presence supports embedded measurement functions, while up to 25 programmable I/O lines can connect digital stimuli or status signals. The usable channel count, accuracy, sampling rate, and analog limits must be established from the complete datasheet, and the USB clock and power network should follow the manufacturer’s recommended implementation.

🖥️

Embedded USB peripheral and dongle

The LPC1342FHN33 fits USB peripheral and dongle designs that need local control logic in a small package. The USB device function provides a direct connection to a host, while the 72 MHz Cortex-M3 core can manage configuration, diagnostics, and protocol processing. Up to 32 kB of flash accommodates embedded firmware and up to 8 kB of SRAM supports transient data handling, reducing the need for external memory in compact designs. Designers should verify the exact USB clock tolerance, transceiver requirements, suspend behavior, and enumeration implementation before release.

🌐

Compact environmental sensor node

The LPC1342FHN33 can coordinate a compact environmental sensor node that samples analog inputs, evaluates readings, and exposes configuration or historical data through USB. Its 72 MHz processing capability provides responsiveness without requiring a larger processor, while the integrated ADC and programmable I/O reduce the need for separate control devices. The 2.0 V to 3.6 V range must be reconciled with sensor and communication requirements, and current consumption should be checked for battery-powered operation. Accurate acquisition also depends on suitable grounding, filtering, reference design, and firmware-controlled sampling timing.

Resumo dos produtos recomendados

SN65HVD230 RS-485 transceiver for industrial communication Usado em: USB-connected industrial control SN74LVC2G34 Dual buffer for digital signal interfacing Usado em: USB-connected industrial control OPA320 Precision operational amplifier for analog front ends Usado em: Portable measurement and instrumentation, USB data-acquisition device TLV9061 Low-power operational amplifier for signal conditioning Usado em: Portable measurement and instrumentation PCA9554 I/O expander for additional digital control Usado em: Building and access-control equipment TCA9535 Expandable I/O port for peripheral control Usado em: Building and access-control equipment ADS1115 Precision delta-sigma ADC for analog measurement channels Usado em: USB data-acquisition device SN74LVC1G125 Single bus buffer for external interface conditioning Usado em: Embedded USB peripheral and dongle PCA9306 Bidirectional voltage-level translator for interface adaptation Usado em: Embedded USB peripheral and dongle TLV9062 Dual operational amplifier for sensor conditioning Usado em: Compact environmental sensor node SHT30 Digital temperature and humidity sensor Usado em: Compact environmental sensor node
What is the LPC1342FHN33?
The LPC1342FHN33 is a 32-bit Arm Cortex-M3 microcontroller from NXP Semiconductors for embedded applications, operating at up to 72 MHz with up to 32 kB of flash and 8 kB of SRAM. It also provides USB device connectivity and is packaged in a 33-terminal 7 mm × 7 mm HVQFN. According to the NXP product information, the Cortex-M3 core uses a three-stage pipeline and Harvard architecture.
What are the key specifications of LPC1342FHN33?
The key LPC1342FHN33 specifications are a 72 MHz maximum clock, 32-bit Arm Cortex-M3 core, up to 32 kB of flash, up to 8 kB of SRAM, 2.0 V to 3.6 V supply range, and USB device support. The package is a 33-terminal HVQCCN measuring 7 mm × 7 mm and 1.40 mm high. NXP Semiconductors describes the device as a highly integrated, low-power embedded microcontroller.
How much flash and SRAM does LPC1342FHN33 have?
The LPC1342FHN33 provides up to 32 kB of flash program memory and up to 8 kB of SRAM. These figures identify it as a compact Cortex-M3 device suitable for control firmware, communication stacks, and modest data-handling workloads. The NXP datasheet listing describes the MCU as a 32-bit Arm Cortex-M3 with up to 32 kB of flash and 8 kB of SRAM, supporting the USB device function.
What is the operating voltage of LPC1342FHN33?
The LPC1342FHN33 operates from 2.0 V to 3.6 V according to the NXP device specifications. A 3.3 V system is therefore a natural fit, but every connected device must tolerate the same voltage domain. The complete datasheet should be consulted for reset thresholds, internal regulator behavior, USB transceiver requirements, and power-consumption conditions across active, idle, and sleep states.
Where can I download the LPC1342FHN33 datasheet PDF?
The official LPC1342FHN33 product information is available on the NXP Semiconductors part page at https://www.nxp.com/part/LPC1342FHN33, where the device data and supporting documents can be accessed. A third-party PDF index is also listed at https://www.alldatasheet.com/datasheet-pdf/pdf/432859/NXP/LPC1342FHN33.html. Use the NXP document for production design decisions, pin assignments, electrical limits, and programming information.
Where is the pinout for LPC1342FHN33?
The LPC1342FHN33 pinout is defined in the manufacturer's pin-description table for the 33-terminal HVQCCN package. Use that table when assigning power, ground, reset, clock, USB, and multiplexed peripheral signals. The public product summaries identify the package and terminal count but do not reproduce every numbered pin, so the complete NXP datasheet should remain the controlling source for PCB layout and assembly.
What can replace the LPC1342FHN33?
The closest documented replacement candidates are pin-compatible members of the same NXP LPC13xx family, but a true drop-in choice must retain the 33-terminal footprint, 72 MHz operating class, 2.0 V to 3.6 V supply range, and required peripheral mix. LPC1343FHN33 is a same-package family candidate, while LPC1341FHN33 offers a lower-performance alternative with reduced functionality. Validate firmware, pin multiplexing, USB behavior, and memory requirements before substitution.
Is LPC1343FHN33 a drop-in replacement for LPC1342FHN33?
LPC1343FHN33 is a same-brand, same-family candidate for a drop-in replacement because it shares the 33-terminal HVQFN format and Arm Cortex-M3 platform. Its higher USB capability can make it useful when the replacement requires host support, but added functions do not automatically preserve the original footprint's peripheral assignments. Compare the pin table, clock limits, memory organization, USB roles, and application firmware before approving it.
Is LPC1341FHN33 suitable as an LPC1342FHN33 replacement?
LPC1341FHN33 can serve as a same-package, lower-performance alternative when its reduced performance and peripheral set satisfy the product requirements. It retains the NXP LPC13xx Arm Cortex-M3 family basis and 33-terminal HVQFN format, but it may not match the LPC1342FHN33's 72 MHz operating target or USB-device behavior. Confirm timing, memory, USB, and pin-multiplex requirements before using it as a drop-in replacement.
LPC1342FHN33 vs LPC1343FHN33: which is better for USB designs?
Choose LPC1343FHN33 when a design requires broader USB host or device capability, and choose LPC1342FHN33 when the specified USB device function is sufficient. Both are NXP Cortex-M3 MCUs in the same 33-terminal HVQFN family, but the additional USB capability of LPC1343 changes the controller and firmware requirements. Verify signal assignment, USB clocking, power, and driver support before making the selection.
When should I choose LPC1342FHN33 over LPC1341FHN33?
Choose LPC1342FHN33 when the design benefits from its 72 MHz maximum clock, up to 32 kB of flash, up to 8 kB of SRAM, and USB device connectivity. LPC1341FHN33 is more appropriate when lower performance and a reduced feature set are acceptable, and a genuine drop-in footprint and electrical match remain important. The faster core can shorten execution time for protocol, control, and signal-processing tasks.
Is LPC1342FHN33 suitable for industrial and control systems?
The LPC1342FHN33 is suitable for compact embedded control systems that need a 32-bit Cortex-M3 core, USB device connectivity, and low-voltage operation. Its 72 MHz maximum clock supports responsive control and communication firmware, while the integrated flash and SRAM reduce external memory requirements. For industrial deployment, confirm the specified operating-temperature grade, isolation, EMC requirements, and long-term availability before production release.
What design considerations apply to the LPC1342FHN33 HVQFN package?
The 33-terminal HVQFN package requires a land pattern that accommodates its fine pitch, exposed thermal pad, and 7 mm × 7 mm body. Follow the manufacturer's footprint, solder-mask, paste, and reflow recommendations, and inspect the underside joints because hidden solder connections may not be visible after assembly. Provide clean supply and ground distribution, place decoupling capacitors near the relevant pins, and verify USB signal routing in the final schematic and PCB review.
Where can I buy LPC1342FHN33 online?
Use the Request a Quote form on this page to ask about LPC1342FHN33 availability, current lead time, and order quantity. The request can be tied to the exact 33-terminal package and required shipment form. Stock and lifecycle can change, so confirm the current manufacturer status and production availability during quotation rather than relying on an old catalog entry or an ambiguous family-level listing.
What is the price and lead time for LPC1342FHN33?
Current pricing and lead time for LPC1342FHN33 should be confirmed through the Request a Quote form on this page. The form should identify the exact NXP part number, 33-terminal HVQFN package, and required quantity or shipment form so the quotation reflects the correct configuration. Lead time can vary with inventory, production scheduling, and order size, making a current quotation necessary for procurement decisions.
Is LPC1342FHN33 in stock and active for production?
The LPC1342FHN33 is listed with an Active life-cycle stage, while current stock should be established through the Request a Quote form on this page. Active status indicates that the manufacturer continues to position the part for production, but it does not guarantee a fixed inventory level. For an active production program, request the current lot availability, lead time, and packaging configuration for your exact order.
What peripherals and tools support the LPC1342FHN33?
The LPC1342FHN33 supports USB device operation and includes an analog-to-digital converter, with up to 40 I/O ports and 25 programmable I/O lines reported for the device family. Firmware development normally depends on the selected Arm Cortex-M3 toolchain and the programming and debug interface documented by NXP. Confirm the exact peripheral assignments, debug connection, flash programming method, and USB host requirements in the complete manufacturer documentation.

Dados de referência de engenharia para LPC1342FHN33 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the LPC1342FHN33 for a compact 3.3 V embedded design that specifically needs a 72 MHz Arm Cortex-M3 core, up to 32 kB of flash, up to 8 kB of SRAM, USB device connectivity, and a 33-terminal HVQFN footprint. Consider LPC1343FHN33 when the application needs the broader USB capabilities associated with that family member, after verifying every pin and firmware dependency. Consider LPC1341FHN33 only when its lower performance and reduced feature set are sufficient, while retaining the same package and board geometry. For all alternatives, confirm operating voltage, memory requirements, peripheral multiplexing, USB behavior, temperature grade, and exposed-pad layout against the complete manufacturer datasheet. The target is generally preferable when its 72 MHz performance and USB device function meet the specification without adding unnecessary functionality.

Comparação com alternativas

Parâmetro Este produto LPC1343FHN33 LPC1341FHN33
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 33-terminal HVQCCN 33-terminal HVQCCN 33-terminal HVQCCN
Processor Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3

Principais diferenciais

  • Targeted 72 MHz performance in a compact Cortex-M3 device (vs LPC1341FHN33)
  • Integrated USB device connectivity (vs LPC1341FHN33)
  • Single-device integration reduces external support circuitry (vs LPC1343FHN33)

Notas de projeto

Use the manufacturer's HVQFN land pattern and exposed-pad assembly recommendations rather than deriving a footprint from the 7 mm × 7 mm body size alone. Confirm pad dimensions, paste apertures, solder-mask clearance, and the thermal-pad connection in the CAD library. A Courtyard-style assembly check and bottom-side X-ray inspection are recommended because fine-pitch joints and the exposed pad may be difficult to verify visually.

Plan the 2.0 V to 3.6 V operating range across startup, reset, USB attach, and suspend states. Place required bypass capacitors at the supply and ground pins with short, low-inductance paths, and include a stable clock and reset implementation. Before enabling USB or sensitive analog functions, verify that supply transitions remain within the limits stated in the complete manufacturer datasheet.

Assign USB, clock, and reset signals from the official pin-description table before laying out the board. Keep the USB data path short, provide a continuous ground reference, and avoid routing high-current or switching signals beneath sensitive communications routes. Review every multiplexing choice in firmware and hardware because a valid package does not guarantee that two family variants use the same peripheral functions on every pin.

Do not select a family alternative solely because its package name matches. Confirm pin-to-pin signal assignments, alternate-function mapping, clock limits, memory organization, USB behavior, and required firmware support. A replacement that is electrically valid may still require changes to startup code, USB descriptors, peripheral configuration, or PCB test points. Run device-specific validation on the intended hardware before production approval.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The Active life-cycle stage is identified by NXP-related catalog information. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not confirmed in the cited product information.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

LPC1342FHN33 datasheet LPC1342FHN33 pinout LPC1342FHN33 datasheet pdf LPC1342FHN33 equivalent LPC1342FHN33 replacement LPC1342FHN33 cross reference LPC1342FHN33 footprint LPC1342FHN33 price LPC1342FHN33 stock NXP LPC1342FHN33 LPC1342FHN33 vs LPC1343FHN33 72MHz Cortex-M3 32KB flash MCU LPC1342FHN33 USB device controller LPC1342FHN33 HVQFN package

Componentes & termos relacionados

NXP Semiconductors LPC1342FHN33 LPC1343FHN33 LPC1341FHN33 Arm Cortex-M3 32-bit microcontroller embedded microcontroller microcontroller semiconductor Harvard architecture three-stage pipeline USB device flash memory SRAM analog-to-digital converter ADC embedded control industrial control data acquisition environmental sensing HVQFN-33 QFN family surface-mount package 2.0 V to 3.6 V 72 MHz
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ