M29F800FT55M3F2 - 8Mbit 5V Parallel NOR Flash 55ns | Micron
N.º da peça: M29F800FT55M3F2 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.6 | $2,60 |
| 10 | $2.45 | $24,50 |
| 100 | $2.3 | $230,00 |
| 500 | $2.2 | $1.100,00 |
| 1.000 | $2.1 | $2.100,00 |
M29F800FT55M3F2 Visão geral
Parallel NOR Flash is a non-volatile memory technology organized as a memory-mapped array that a processor can execute code from directly (execute-in-place, XIP). Within the memory hierarchy it sits alongside SRAM, DRAM, and serial NOR Flash as a core memory IC, distinguished by random access via a parallel address/data bus and by very high read reliability, making it a classic boot-memory choice in embedded systems.
Key features include single 5V supply operation for both read and program/erase, a fast 55 ns access time suitable for zero-wait-state microprocessor buses, and an embedded program/erase controller that automates byte/word programming and block erase algorithms, removing timing burden from the host CPU. The dual organization (x8/x16) lets one PCB footprint serve 8-bit and 16-bit bus designs.
Architecturally, the device uses a uniform-array block structure with hardware data protection, status polling, and command-set-based operation typical of the M29F family. The 5V I/O interface makes it directly compatible with classic 5V microcontrollers such as the 8051, 68k, and PowerPC families without level shifting.
Typical applications include boot code storage in industrial control, telecommunications line cards, set-top boxes, and automotive-adjacent industrial modules operating from -40C to +125C, where a 5V legacy bus must interface with non-volatile code memory.
Design consideration: confirm the boot-block position (top for this FT suffix, bottom for FB suffix) matches your reset vector, since swapping FT and FB parts requires address remapping even though the footprint is identical.
This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in same-package alternatives, and practical selection notes in one place.
Alternativas drop-in para M29F800FT55M3F2 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com M29F800FT55M3F2 (mesmo formato e footprint) — diferindo em Organization, Package, Memory Type, Interface, Density.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
M29F800FB55M3F2
✅ Drop-In✓ Em estoque
$3.72 / unidade
Ver ficha técnica →M29F800FT55M3E2
✅ Drop-In✓ Em estoque
$3.95 / unidade
Ver ficha técnica →M29F800FB55N3F2
✅ Drop-In✓ Em estoque
$2.47 / unidade
Ver ficha técnica →M29F800FT55N3F2
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$0.78 / unidade
Ver ficha técnica →M29F400FT55N3F2
✅ Drop-In✓ Em estoque
$1.51 / unidade
Ver ficha técnica →M29F800FT55M3F2 Classificações máximas e características elétricas
| Tipo de memória | Parallel NOR Flash |
| Density | 8 Mbit (8389 kbits) |
| Organização da memória | 512K x 16 / 1M x 8 |
| Access Time | 55 ns |
| Supply Voltage (VCC) | 5 V |
| Boot Block Position | Top boot block |
| Programming Interface | Embedded program/erase controller |
| Temperatura de operação | -40C to +125C |
| Encapsulamento | 44-pin SO (SOP) |
| Tipo de montagem | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Interface | Parallel, x8/x16 selectable |
| Status RoHS | Compliant (lead-free suffix F2) |
Guia de Configuração de Pinos do M29F800FT55M3F2 44-pin so (sop)
Configuração de pinos para M29F800FT55M3F2 (pacote 44-pin so (sop)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para M29F800FT55M3F2.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
M29F800FT55M3F2 é adequado para 6 aplicaçãos: Boot Code Storage in Industrial Controllers, Telecommunications Line Cards, Set-Top Box and Consumer Electronics Boot Memory, Legacy 5V Microprocessor Systems, Automotive-Adjacent Industrial Modules, Test and Measurement Instrument Firmware.
Boot Code Storage in Industrial Controllers
The M29F800FT55M3F2 stores bootloader and firmware images in industrial PLCs, motor drives, and process controllers that still run 5V microprocessor buses. Its 55 ns access time supports zero-wait-state code fetch, while the top boot block protects the reset vector from accidental erasure during field firmware updates. The embedded program/erase controller allows the host CPU to issue block erase and word program commands without timing loops, simplifying in-field update firmware. Operating from -40C to +125C, it survives factory-floor temperature extremes, and the 44-pin SO footprint allows footprint-compatible density moves within the M29F family.
Recomendado
Telecommunications Line Cards
Legacy telecom line cards and network interface modules frequently use 5V parallel NOR Flash for code storage. The M29F800FT55M3F2's parallel x16 bus interfaces directly to classic communication processors without glue logic, and its 8 Mbit density accommodates protocol stacks and diagnostics. The 55 ns access time matches the bus timing of 5V-era telecom ASICs, and the embedded program/erase controller supports remote firmware download over the network. Its -40C to +125C rating covers outdoor cabinets and unconditioned equipment rooms, while the tape-and-reel format suits automated assembly of high-card-count production.
Recomendado
Set-Top Box and Consumer Electronics Boot Memory
Set-top boxes and consumer AV equipment built on 5V platforms use the M29F800FT55M3F2 to hold boot code and channel tables. The top boot block isolates the bootloader so application regions can be updated via OTA mechanisms without risking a bricked device. The 512K x16 organization provides 1 MB equivalent storage in a single 44-pin SO package, keeping BOM cost near $2.60 as of 2026-09-05. Its x8/x16 selectable bus lets one design serve both cost-optimized 8-bit and performance-oriented 16-bit processor variants, and the embedded program/erase controller removes CPU load during table updates.
Recomendado
Legacy 5V Microprocessor Systems
Designs based on 8051, 68k, or PowerPC-class 5V processors require memory with native 5V I/O. The M29F800FT55M3F2 eliminates level shifters because its VCC and I/O are both specified at 5V, and its 55 ns timing meets classic EPROM-bus timing requirements, making it a direct successor to 27C080-class EPROMs with in-system reprogrammability. The x8 mode supports byte-wide 8051 buses while x16 mode doubles throughput on 68k systems. The M29F family command set (mirroring JEDEC-style conventions) simplifies migration from earlier 5V Flash generations within the same footprint.
Recomendado
Automotive-Adjacent Industrial Modules
Modules installed near automotive environments - telematics gateways, fleet trackers, off-highway equipment controllers - benefit from the M29F800FT55M3F2's -40C to +125C operating range and robust parallel NOR reliability for code storage. The device's hardware data protection guards against spurious writes during power transients common in 12V/24V vehicle electrical systems, and the top boot block keeps the boot image immutable during application updates. The 5V rail is directly available from legacy vehicle supply chains using 5V regulators, and the 44-pin SO package withstands vibration better than fine-pitch BGAs.
Recomendado
Test and Measurement Instrument Firmware
Bench instruments and data loggers built on 5V architectures use the M29F800FT55M3F2 for firmware and calibration-table storage. Random parallel access at 55 ns supports fast boot and lookup-table reads, while in-system programmability lets service technicians update firmware in the field. The 8 Mbit capacity separates a small protected boot region from larger application and calibration blocks. The wide -40C to +125C range accommodates instruments stored in vehicles or unheated facilities, and the SO package's gull-wing leads support straightforward inspection and rework on instrument assembly lines.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para M29F800FT55M3F2 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | M29F800FB55M3F2 | M29F800FT55M3E2 | M29F800FT55N3F2 |
|---|---|---|---|---|
| Package | 44-pin SO (SOP) | 44-pin SO (SOP) - same | 44-pin SO (SOP) - same | 44-pin SO ordering code - verify |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology |
| Density | 8 Mbit | 8 Mbit | 8 Mbit | 4 Mbit |
| Access Time | 55 ns | 55 ns | 55 ns | 55 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Boot Block Position | Top | Bottom | Top | Top |
| Organization | 512K x16 / 1M x8 | 512K x16 / 1M x8 | 512K x16 / 1M x8 | 256K x16 / 512K x8 |
| Lead-Free / RoHS Suffix | F2 (lead-free) | F2 (lead-free) | E2 (legacy suffix) | F2 (lead-free) |
Principais diferenciais
- Top boot block protects reset vector (vs M29F800FB55M3F2)
- Current lead-free F2 ordering code (vs M29F800FT55M3E2)
- Double the code capacity per footprint (vs M29F400FT55N3F2)
Notas de projeto
Verify boot block position before substituting: the FT suffix in M29F800FT55M3F2 places boot blocks at the top of the address map, so a pin-compatible FB (bottom boot) part will mis-map the reset vector and brick the system even though it drops onto the same footprint. Cross-check your processor's reset vector address against the datasheet block address table before finalizing the BOM, especially when dual-sourcing FT and FB variants across product lines.
Decouple VCC with a 0.1 uF ceramic capacitor placed within a few millimeters of the 44-pin SO package supply pins, and add bulk capacitance (4.7-10 uF estimated value - confirm against the Micron datasheet ICC transient figures) to support program/erase current surges. Keep address and data bus traces length-matched loosely; at 55 ns access times, signal integrity is forgiving, but avoid routing the write-enable line adjacent to clock lines to prevent spurious program commands during bus contention.
The device operates from a single 5V rail for read, program, and erase; do not attempt operation at 3.3V. Ensure the host CPU uses the BYTE pin correctly to select x8 versus x16 organization, floating it only where the datasheet permits. During power-up and power-down, hold output enable and write enable deasserted to prevent accidental writes - implement the reset/power-down pin (RP) driven by a supervisor for reliable brown-out protection rather than relying on resistor pull-ups alone.
Informações de conformidade
F2 suffix indicates lead-free/RoHS-compliant ordering code per Micron numbering and distributor listings. REACH, halogen-free, and conflict-minerals status not stated in provided data - verify on Micron product page.
