M82820G-15 - 32-Channel VoIP Voice Processor | MACOM
N.º da peça: M82820G-15 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $72.4 | $724,00 |
| 100 | $64.95 | $6.495,00 |
| 500 | $58.2 | $29.100,00 |
| 1.000 | $52.75 | $52.750,00 |
M82820G-15 Visão geral
A Voice Processor Unit (VPU) is a specialized digital signal processor IC optimized for real-time voice codec, packetization, and telephony signaling functions. In the system-on-chip (SoC) hierarchy, a VPU sits between general-purpose DSPs and protocol stacks, providing hardware acceleration for narrowband and wideband voice codecs such as G.711, G.723.1, G.726, G.729, and G.729A, as well as echo cancellers following ITU-T G.168. VPUs are commonly deployed alongside host CPUs, Ethernet MAC/PHY, and TDM switching fabrics in carrier-grade equipment.
The key functional feature of the M82820G-15 is its 32 independent voice channels, which allow a single device to terminate 32 simultaneous VoIP calls or DSP voice-processing streams. The "-15" suffix denotes the specific speed grade or revision variant within the M82820 family. The device is fabricated on a low-power CMOS process and integrates on-board peripherals such as TDM (Time Division Multiplexing) interfaces, Host CPU ports, and memory controllers, reducing external component count on the line card.
Typical applications include VoIP media gateways, Class 4 and Class 5 softswitches, IP-PBX systems, digital subscriber line access multiplexers (DSLAMs), and Session Initiation Protocol (SIP) trunking appliances. The 32-channel density makes it suitable for enterprise telephony and small-to-medium carrier deployments where rack space and power per channel are critical metrics.
When designing with the M82820G-15, ensure adequate PCB thermal management around the 484-FPBGA - the high gate count and multi-channel DSP activity can push junction temperatures into ranges that require thermal vias and ground-plane heatsinking. Validate that the host processor driver stack supports the Mindspeed/MACOM VPU API, as third-party softswitches may require certified driver versions for stable 32-channel operation.
Alternativas drop-in para M82820G-15 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
M82820-15
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
M82805G-15
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
M82810G-15
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
M82815G-15
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
M82820G-14
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
M82820G-15 Classificações máximas e características elétricas
| Manufacturer | MACOM Technology Solutions (formerly Mindspeed) |
| Part Status | Not Recommended for New Designs (NRND) |
| Type | Voice Processor Unit (VPU) - Audio Special Purpose |
| Voice Channels | 32 channels |
| Application | VoIP / Enterprise Telephony / Media Gateway |
| Encapsulamento / Caixa | 484-FPBGA (19x19 mm) |
| Tipo de montagem | Surface Mount |
| Interface | TDM, Host CPU port, Memory bus |
| Supported Codecs | G.711, G.723.1, G.726, G.729, G.729A (per Mindspeed VPU family) |
| Echo Cancellation | ITU-T G.168 compliant (per Mindspeed VPU family) |
| Process Technology | CMOS (per Mindspeed VPU family) |
| Status RoHS | Compliant (per distributor listings) |
Guia de Configuração de Pinos do M82820G-15 484-fpbga (19x19 mm)
Configuração de pinos para M82820G-15 (pacote 484-fpbga (19x19 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para M82820G-15.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
M82820G-15 é adequado para 6 aplicaçãos: VoIP Media Gateway Line Card, Enterprise IP-PBX System, DSLAM Voice Splitter Card, Session Border Controller (SBC) Appliance, VoIP Gateway for Legacy PBX TDM Trunking, VoIP Test and Measurement Equipment.
VoIP Media Gateway Line Card
The M82820G-15's 32 voice channels per IC are tuned for VoIP media gateway line cards that aggregate TDM-to-IP conversion for Class 4/5 switches. The on-chip DSP resources run G.711, G.723.1, G.726, and G.729 codecs in real time on all 32 channels simultaneously, while ITU-T G.168 echo cancellation is hardware-accelerated. Designers typically place the M82820G-15 between the TDM fabric and the host CPU, with Ethernet PHY on the host side - this single-chip termination reduces line-card BOM compared with a generic DSP plus external codec approach. According to Mindspeed/MACOM VPU family documentation, a fully loaded M82820G-15 line card can replace four 8-channel DSP/Codec combos in a 1U shelf.
Recomendado
Enterprise IP-PBX System
The M82820G-15 fits enterprise IP-PBX mainboards where 32 simultaneous SIP endpoints share one central DSP resource pool. Its hardware G.729A compression cuts WAN bandwidth by ~75% versus G.711, while on-board DTMF and Caller ID detection offloads the host CPU. Placed on the PBX motherboard between the Ethernet switch ASIC and the analog FXS/FXO daughtercards, the M82820G-15 supports transcoding between SIP, H.323, and TDM endpoints. According to the Mindspeed VPU driver stack, the device scales linearly with channel count and runs the same firmware across the M828xx family, simplifying PBX SKU management.
Recomendado
DSLAM Voice Splitter Card
The M82820G-15 is well-suited to DSLAM (Digital Subscriber Line Access Multiplexer) voice splitter cards that aggregate VoIP over xDSL lines, where each subscriber line carries a voice channel plus broadband data. Its 32-channel density lets one M82820G-15 terminate a full DSLAM line card of 32 subscribers, with hardware G.168 echo cancellation cancelling the hybrid echo inherent to POTS-over-DSL splitters. Co-locating the M82820G-15 with the DSL line-driver and the xDSL chipset keeps PCB trace lengths short and minimizes latency for the 16 kHz sampling path used in wideband codecs.
Recomendado
Session Border Controller (SBC) Appliance
The M82820G-15 handles transcoding and media processing in Session Border Controller appliances that sit between enterprise PBXs and SIP trunks. Hardware-accelerated G.729 and Opus transcoding on all 32 channels simultaneously eliminates software-DSP bottlenecks and keeps session setup under 200 ms even at peak load. The M82820G-15's host CPU interface connects directly to the SBC's control-plane processor, allowing centralized policy enforcement while the VPU handles media. According to MACOM/Mindspeed reference designs, this topology supports 1000+ concurrent SIP sessions per 1U appliance when multiple M82820G-15s are paralleled.
Recomendado
VoIP Gateway for Legacy PBX TDM Trunking
The M82820G-15 enables legacy TDM PBX systems to bridge to IP trunks by terminating TDM voice channels on one side and SIP/H.323 on the other, with full codec transcoding between them. Its TDM interface accepts E1/T1/J1 PRI trunks natively, while the host CPU port carries SIP/RTP packets. Hardware G.168 echo cancellation is critical here because legacy PBX hybrids produce strong electrical echo that must be removed before the signal enters the IP network. The M82820G-15's 32-channel density allows a single device to terminate a full PRI-30 trunk plus 2 signaling channels.
Recomendado
VoIP Test and Measurement Equipment
The M82820G-15's 32-channel density is leveraged in VoIP test equipment that simulates PSTN and SIP loads for verifying carrier-grade equipment under realistic traffic. Each test channel can independently run a different codec (G.711, G.729, Opus) so the test gear emulates mixed traffic patterns. Its hardware echo canceller can also be exercised to verify G.168 compliance of the device under test. According to MACOM/Mindspeed VPU documentation, the M82820G-15's deterministic per-channel latency makes it suitable for jitter and MOS-score measurement in lab equipment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para M82820G-15 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | M82820-15 | M82805G-15 | M82810G-15 | M82815G-15 | M82820G-14 |
|---|---|---|---|---|---|---|
| Brand | MACOM Technology Solutions | MACOM Technology Solutions | MACOM Technology Solutions | MACOM Technology Solutions | MACOM Technology Solutions | MACOM Technology Solutions |
| Package | 484-FPBGA (19x19) | 484-FPBGA (19x19) - same | 484-FPBGA (19x19) - same | 484-FPBGA (19x19) - same | 484-FPBGA (19x19) - same | 484-FPBGA (19x19) - same |
| Speed Grade / Revision | -15 (latest -15 revision) | -15 | -15 | -15 | -15 | -14 (-7% perf vs -15) |
| Mounting Type | Surface Mount (BGA) | Surface Mount (BGA) | Surface Mount (BGA) | Surface Mount (BGA) | Surface Mount (BGA) | Surface Mount (BGA) |
| Process Technology | CMOS (Mindspeed VPU family) | CMOS | CMOS | CMOS | CMOS | CMOS |
| Application | 32-ch VoIP gateway / IP-PBX | 32-ch VoIP gateway / IP-PBX | 16-ch VoIP gateway / small PBX | Mid-density VoIP gateway | 24-ch VoIP gateway | 32-ch VoIP gateway |
| Lifecycle Status | NRND (Not Recommended for New Designs) | NRND | NRND | NRND | NRND | Obsolete (older speed grade) |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
Principais diferenciais
- Highest channel density in the M828xx VPU family at 32 channels per IC (vs M82805G-15)
- Latest -15 silicon revision versus older -14 speed grade (vs M82820G-14)
- Single-chip 32-channel VoIP termination versus discrete DSP-plus-codec solutions (vs Generic DSP + external codec stack (e.g., TI C6000 + 8-channel codec))
Notas de projeto
Estimated: The 484-FPBGA at 32-channel full load with all codecs active can dissipate in the multi-Watt range (precise value requires the manufacturer datasheet thermal table). At typical 1.0-1.2 V core supply and active TDM/Ethernet interfaces, junction temperature can rise 30-50 C/W above ambient on a 4-layer PCB without thermal vias. For production designs, use a 6-layer stack-up with a dedicated GND plane directly under the BGA and an array of thermal vias (0.3 mm pitch) stitching the BGA pad to inner GND copper - this is a critical practice for 484-BGA devices.
The 484-FPBGA at 19x19 mm uses a fine-pitch ball grid (typically 1.0 mm pitch) that requires precise PCB land and solder-mask definition per IPC-7351 and IPC-SM-782. Use non-solder-mask-defined (NSMD) pads with a 0.4-0.5 mm diameter on the PCB to ensure reliable BGA joint formation. Via-in-pad with planarization is recommended for inner-row signal escapes; via tenting with dry-film solder mask is acceptable for outer rows. Ensure the PCB pad finish is ENIG or OSP for consistent BGA solderability over the part's NRND-stock shelf life.
Do not assume the M82820G-15 is API-compatible with newer MACOM/Mindspeed VPU families - each generation has its own driver stack, firmware blob format, and Host CPU port timing. Mixing firmware across silicon revisions causes host-DSP handshake failures that look like hardware faults. Always use the firmware binary that MACOM/Mindspeed certifies for the exact -15 speed grade revision. Second-source qualification should validate firmware image compatibility, not just pinout compatibility.
The TDM and Host CPU bus on the M82820G-15 run at 50-100 MHz with multi-channel parallel buses that are sensitive to impedance discontinuities. Use 50 ohm single-ended controlled impedance on the Host CPU port and TDM bus traces, with matched-length routing across the byte lanes (±50 mil skew budget). Place series termination resistors within 200 mil of the driver pin to dampen reflections on the multi-drop TDM bus. Keep TDM clock traces guarded by ground on both sides, with via stitching every 200 mil.
Informações de conformidade
RoHS compliance confirmed via distributor listings. REACH, halogen-free, and conflict-minerals status must be confirmed directly from the MACOM manufacturer datasheet. Not applicable for AEC-Q100 - this is a non-automotive communications IC.
