MAX3221EAE+TG1Z - 250kbps RS-232 Transceiver | Analog Devices
N.º da peça: MAX3221EAE+TG1Z ✓ AtivoMAX3221EAE+TG1Z Visão geral
An RS-232 transceiver is an interface IC that converts logic-level signals between a computer or embedded controller and the voltage levels used by an RS-232 communications link. Within the interface hierarchy, the MAX3221EAE+TG1Z belongs to the RS-232 transceiver class, where it integrates the line driver, line receiver, charge-pump support, and low-power control functions needed to implement a complete single-channel serial port.
Key operating characteristics include a 3 V to 5.5 V supply range, 250 kbps maximum signaling rate, and ±15 kV IEC ESD protection. The automatic shutdown and wakeup features help reduce supply consumption when the associated system is inactive. A low-power supply-current specification of 1 µA is associated with the MAX3221EAE family, supporting battery-operated and energy-conscious equipment designs.
The MAX3221EAE+TG1Z uses the MAX3221E 1-driver/1-receiver architecture. Its 16-pin SSOP construction keeps the interface compact while providing the external components and connections required for RS-232 operation. The 250 kbps capability makes it suitable for moderate-speed control links, configuration ports, data acquisition equipment, and service interfaces that do not require modern multi-gigabit serial communication.
Typical applications include industrial control and instrumentation, data acquisition systems, test and measurement equipment, embedded serial adapters, and point-of-sale or peripheral interfaces. Automatic shutdown is particularly useful in portable and remotely powered systems where the serial transceiver can remain present on the board without maintaining a continuously active internal state. The integrated ESD protection improves interface robustness when cables connect the board to external equipment.
A key design consideration is the distinction between the logic-side supply and the RS-232 line-side operating requirements. Confirm capacitor selection, charge-pump operation, logic levels, and shutdown-control polarity against the manufacturer datasheet before layout release. Place the required charge-pump and bypass capacitors close to their designated pins, and keep the RS-232 connector and interface traces physically separated from sensitive analog or high-speed digital nets.
This page consolidates the verified electrical identity, package details, interface characteristics, drop-in alternatives, and application guidance for the MAX3221EAE+TG1Z. It also highlights practical distinctions among same-family and cross-brand RS-232 interface options so engineers can select a part based on package fit, supply range, data rate, shutdown behavior, and protection requirements rather than by partial parameter similarity alone.
Alternativas drop-in para MAX3221EAE+TG1Z — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX3221EAE+TG1Z (mesmo formato e footprint) — diferindo em ESD Protection, Package, Maximum Data Rate, Supply Voltage Range, Number of Drivers.
MAX3221EAE+T
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3221EAE+
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3221EEAE+TG1Z
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3221EUE+
✅ Drop-InConsulte o preço
Ver ficha técnica →ICL3221EIVZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX3221EAE+TG1Z Especificações
| Product Type | Single-channel RS-232 transceiver |
| Number of Drivers | 1 driver |
| Number of Receivers | 1 receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Low-Power Supply Current | 1 µA |
| ESD Protection | ±15 kV IEC ESD |
| Automatic Shutdown | Supported |
| Automatic Wakeup | Supported |
| Communication Standard | EIA/TIA-232 and V.28/V.24 |
| Encapsulamento | 16-pin SSOP |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do MAX3221EAE+TG1Z 16-pin ssop
Configuração de pinos para MAX3221EAE+TG1Z (pacote 16-pin ssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX3221EAE+TG1Z.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX3221EAE+TG1Z é adequado para 6 aplicaçãos: Industrial Control Interfaces, Data Acquisition Equipment, Test and Measurement Equipment, Embedded Serial Adapters, Point-of-Sale Peripherals, Portable Diagnostic Devices.
Industrial Control Interfaces
The MAX3221EAE+TG1Z fits point-to-point RS-232 links used to configure or monitor industrial controllers because it combines one driver, one receiver, a 3 V to 5.5 V supply range, and data rates up to 250 kbps. The device can sit between a low-voltage embedded controller and a remote service connector without occupying the additional channel pins of a multi-driver transceiver. Its ±15 kV IEC ESD protection strengthens the interface against cable-borne electrostatic discharge. Automatic shutdown and wakeup also help manage power in unattended equipment. Confirm the exact temperature grade and external protection strategy against the finished system’s environmental requirements.
Recomendado
Data Acquisition Equipment
The MAX3221EAE+TG1Z is appropriate for control and data-transfer ports on compact data acquisition equipment where a 250 kbps RS-232 link is sufficient. Its single-driver/1-receiver arrangement preserves board space compared with a multi-channel transceiver, while the 3 V to 5.5 V operating range supports modern controller supply rails. Automatic shutdown is useful when instruments spend time idle, and wakeup permits reconnection without continuously powering the interface. The ±15 kV IEC ESD rating improves robustness at an exposed equipment port, although cable length, grounding, and surge conditions still require system-level validation.
Recomendado
Test and Measurement Equipment
The MAX3221EAE+TG1Z can provide a compact remote-control or service interface on test and measurement instruments. A 250 kbps maximum rate is well matched to command traffic, status reporting, and configuration exchanges rather than bulk file transfer. The device operates from 3 V to 5.5 V, making it suitable for instruments built around 3.3 V or 5 V logic. Automatic shutdown and wakeup reduce power when the instrument is not communicating, while ±15 kV IEC ESD protection adds defense at a connector that may be exposed to user cables. Validate the external connector and grounding arrangement for the target test environment.
Recomendado
Embedded Serial Adapters
The MAX3221EAE+TG1Z suits embedded serial adapters that translate a low-voltage controller port to an RS-232 connection. The 16-pin SSOP package minimizes board area, and the one-driver/1-receiver topology matches a point-to-point link. Its 250 kbps capability is suitable for configuration and command traffic, while the 3 V to 5.5 V supply range supports common embedded rails. Automatic shutdown and wakeup are especially useful in battery-operated adapters where continuous interface power would waste energy. The ±15 kV IEC ESD protection is valuable when the adapter connects to external cabling, but the final product still needs appropriate system grounding.
Recomendado
Point-of-Sale Peripherals
The MAX3221EAE+TG1Z can support a point-of-sale peripheral connection when the equipment requires one RS-232 channel and a maximum rate of 250 kbps. Its compact 16-pin SSOP package is useful in space-constrained terminals, and operation from 3 V to 5.5 V simplifies integration with mixed-voltage logic. Automatic shutdown and wakeup help control consumption when the peripheral bus is idle, while ±15 kV IEC ESD protection improves resilience at an externally accessible connection. The design must still account for ground potential differences, cable routing, and connector-level surge protection because the transceiver’s internal ESD rating does not replace a complete port-protection strategy.
Recomendado
Portable Diagnostic Devices
The MAX3221EAE+TG1Z is well matched to portable diagnostic tools that communicate through a single RS-232 service port. Its 3 V to 5.5 V supply range supports compact battery-powered architectures, and automatic shutdown and wakeup reduce the power burden of an intermittently used port. The 1-driver/1-receiver configuration keeps the interface compact, while the 250 kbps rate supports command, log, and diagnostic exchanges. ±15 kV IEC ESD protection is beneficial for a device likely to be connected with field cables. Engineers should verify the exact operating-temperature grade, connector isolation, and cable protection before high-volume deployment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MAX3221EAE+TG1Z — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX3221EAE+T | MAX3221EAE+ | MAX3221EEAE+TG1Z | MAX3221EUE | ICL3221EIVZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Renesas Electronics |
| Package | 16-pin SSOP | 16-pin SSOP - same | 16-pin SSOP - same | 16-pin SSOP - same | 16-pin SSOP - same | 16-pin SSOP - same |
| Transceiver Configuration | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver |
Principais diferenciais
- Single-channel footprint with full-rate RS-232 operation (vs MAX3223E)
- Automatic power management for single-port designs (vs ICL3221EIVZ)
- 3 V to 5.5 V operation with enhanced ESD protection (vs MAX3221EUE)
Notas de projeto
Place the charge-pump capacitors, supply bypass capacitor, and other required external components directly beside the pins identified in the MAX3221E family datasheet. Keep traces short and provide a low-impedance ground return for the transceiver. The 16-pin SSOP footprint leaves limited space for routing, so finalize the pin assignment and capacitor locations before placing the RS-232 connector to avoid long loops or awkward escape routing.
Do not treat ±15 kV IEC ESD protection as a complete solution for every cable-connected port. Confirm the connector, cable, ground topology, and system-level surge requirement, and add external protection when the interface can encounter voltages beyond the transceiver rating. Also verify shutdown-control polarity and wakeup timing because incorrect logic assumptions can prevent the port from entering or leaving its low-power state.
Keep the RS-232 driver and receiver traces away from sensitive analog inputs, clocks, and high-speed digital nets. Connect the transceiver ground to the system reference plane in accordance with the recommended interface circuit rather than relying on an isolated signal-ground path. When the port crosses a significant ground potential difference, evaluate isolation, surge current, and cable length separately from the IC’s ESD specification.
Budget the charge-pump current, interface load, and logic-side supply current together when selecting the local power source. The MAX3221EAE family has a low-power shutdown specification of 1 µA, but that figure does not describe total active-mode consumption. Use the datasheet operating-current and capacitor requirements to ensure that the supply remains stable during repeated data transmission and automatic wakeup events.
Informações de conformidade
The exact MAX3221EAE+TG1Z environmental and material-compliance status is not established by the manufacturer-page and distributor content available for this product. AEC-Q100 is not applicable because this is a general-purpose RS-232 interface transceiver rather than an automotive-qualified device.