MC68020FE20E - 32-Bit 20MHz MPU, 132-CQFP | NXP Semiconductors
N.º da peça: MC68020FE20E ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $54.94 | $54,94 |
| 10 | $49.45 | $494,50 |
| 100 | $43.95 | $4.395,00 |
| 500 | $38.46 | $19.230,00 |
| 1.000 | $32.97 | $32.970,00 |
MC68020FE20E Visão geral
A microprocessor (MPU) is the central processing unit of a computer system, fabricated as a single integrated circuit that fetches, decodes, and executes instructions from memory. The MC68020 belongs to the M68000 family lineage (M68k), an early 32-bit architecture widely adopted in workstations, industrial controllers, and military systems during the 1980s and 1990s. It sits within the broader hierarchy of: MPU -> microprocessor -> processor -> digital IC -> semiconductor. The 68020 was notable for introducing on-chip instruction caching and a true 32-bit ALU within the family.
Key features of the MC68020FE20E include a 20 MHz maximum clock frequency, 32-bit internal and external data paths, 32-bit address space (4 GB linear), integrated 256-byte instruction cache, and a paged memory management unit (MMU) interface via companion coprocessors. The 132-CQFP package provides a robust ceramic enclosure suited to high-reliability and extended-temperature applications.
The architecture employs a load/store programming model with orthogonal addressing modes, supporting demand-paged virtual memory when paired with the MC68851 PMMU. Bus arbitration, snooping, and burst-mode memory transfers are hardware-supported for high-throughput systems. The HCMOS process delivers the speed and low-power characteristics required for embedded compute platforms of its era.
Typical applications include legacy VMEbus industrial controllers, aerospace and military embedded systems, telecommunications switching equipment, and long-life-cycle retrofits of original M68k designs. The CQFP ceramic package and extended-temperature grade make the FE-suffix suitable for defense and aerospace programs requiring radiation-tolerant or ruggedized components.
When designing with this device, note that it requires external clock generation, external memory, and an external MMU (MC68851) for full virtual-memory operation. The 5 V supply and CQFP footprint require careful PCB thermal management and through-hole or socketed mounting rather than standard surface-mount reflow.
This page synthesizes distributor pricing, lifecycle status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para MC68020FE20E — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC68020FE20E (mesmo formato e footprint) — diferindo em Mounting Type, On-chip Cache, RoHS Status, Supply Voltage.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC68020FE16E
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC68020FE25E
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC68020FE20B1
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC68020FE20E Classificações máximas e características elétricas
| Core Architecture | M680x0 (68020) |
| Number of Cores | 1 |
| Largura do barramento de dados | 32-bit |
| Address Bus Width | 32-bit |
| Frequência máxima de clock | 20 MHz |
| Tensão de alimentação | 5 V |
| Operating Temperature Grade | Extended (E suffix) |
| Process Technology | HCMOS |
| Instruction Set | CISC, M68k |
| On-chip Cache | 256-byte instruction cache |
| MMU Support | External MC68851 PMMU |
| Encapsulamento / Caixa | 132-BCQFP (24x24 mm) |
| Tipo de montagem | Surface Mount / Socket |
| Packaging | Tray |
| Lead Free Status | Lead Free |
| Status RoHS | RoHS Compliant |
| Manufacturer | NXP Semiconductors (formerly Motorola/Freescale) |
Guia de Configuração de Pinos do MC68020FE20E 132-bcqfp (24x24 mm)
Configuração de pinos para MC68020FE20E (pacote 132-bcqfp (24x24 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC68020FE20E.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC68020FE20E é adequado para 6 aplicaçãos: Legacy VMEbus Industrial Controllers, Aerospace and Military Embedded Systems, Telecommunications Switching Equipment, Long-Life-Cycle Retrofit Designs, Workstation and Server Legacy Platforms, Industrial Robotics and Motion Control.
Legacy VMEbus Industrial Controllers
The MC68020FE20E was a flagship CPU for VMEbus-based industrial controllers throughout the 1990s and remains in service for plant-floor retrofits. Its 20 MHz clock and 32-bit M68k instruction set deliver deterministic interrupt handling for PLC, SCADA, and motion-control backplanes. The 32-bit address space accommodates large I/O maps typical of process-line controllers. Pairing the MPU with the MC68851 PMMU enables virtual-memory UNIX-style controllers, while bare-metal operation handles real-time PLC tasks. The ceramic CQFP package withstands factory-floor thermal cycling and vibration better than plastic QFP equivalents.
Recomendado
Aerospace and Military Embedded Systems
The MC68020FE20E's extended-temperature grade (E suffix) and ceramic CQFP package make it suitable for ruggedized defense and aerospace compute platforms. Avionics subsystems, mission computers, and ground-vehicle controllers that adopted the 68020 in the late 1980s continue to require this exact part for sustainment and obsolescence management. The 5 V HCMOS design and proven silicon maturity provide predictable radiation and thermal behavior in harsh environments. Rochester Electronics and authorized defense distributors hold long-term supply agreements specifically for these legacy programs.
Recomendado
Telecommunications Switching Equipment
Public-switched telephone network (PSTN) central-office switches and early mobile base-station controllers adopted the MC68020FE20E for call-processing and signaling tasks. Its 32-bit ALU and orthogonal addressing modes handle multi-protocol stacks and signaling System 7 (SS7) message processing at 20 MHz. The part's deterministic bus arbitration supports real-time TDM (time-division multiplexing) traffic without jitter. Legacy telecom OEMs continue to procure this part through authorized channels for sustaining existing switch infrastructure where modernization would require complete system redesign.
Recomendado
Long-Life-Cycle Retrofit Designs
The MC68020FE20E supports M68k-based product lines with multi-decade service requirements, including medical imaging controllers, scientific instruments, and printing/finishing equipment. The ceramic CQFP package and original-tooling die mean installed bases can be sustained without requalification. Designers maintaining these systems leverage the part's mature toolchain (Motorola/MetroWerks/CodeWarrior) and abundant documentation. The 5 V single supply simplifies power architecture, and the 32-bit data path keeps pace with legacy data-acquisition requirements.
Recomendado
Workstation and Server Legacy Platforms
Early Unix workstations (Sun-3, Apollo, early NeXT) and entry-level servers in the late 1980s were built around the MC68020FE20E. Replacement parts are required to keep museum-grade research, archival, and specialized data-processing systems operational. The 32-bit virtual-memory architecture (with MC68851) supported full System V Unix variants. While not a drop-in for modern compute, the part remains essential in heritage computing preservation and certain scientific instrument controllers that emulate original host environments.
Recomendado
Industrial Robotics and Motion Control
Multi-axis robotic controllers and CNC machines of the 1990s used the MC68020FE20E for servo-loop computation and trajectory planning. The 20 MHz clock provides adequate headroom for 6-axis kinematics at typical millisecond update rates. The M68k bus supports deterministic data exchange with servo amplifier cards over VMEbus. The ceramic CQFP package tolerates the thermal and vibration environment of factory-floor machinery. Modernization efforts favor newer ARM-based MCUs, but legacy equipment sustainment continues to drive replacement demand for this part.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC68020FE20E — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC68020FE16E | MC68020FE25E | MC68020FE20B1 |
|---|---|---|---|---|
| Package | 132-BCQFP (24x24 mm) | 132-BCQFP (24x24 mm) - same | 132-BCQFP (24x24 mm) - same | 132-BCQFP (24x24 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Maximum Clock Frequency | 20 MHz | 16 MHz | 25 MHz | 20 MHz |
| Core Architecture | M68020 | M68020 | M68020 | M68020 |
| Data Bus Width | 32-bit | 32-bit | 32-bit | 32-bit |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | Extended (E) | Extended (E) | Extended (E) | Commercial |
| Process Technology | HCMOS | HCMOS | HCMOS | HCMOS |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- Identical silicon die at the same 132-CQFP package (vs MC68020FE25E)
- Extended-temperature grade for ruggedized systems (vs MC68020FE20B1)
- Sole-source legacy silicon with no direct cross-brand equivalent (vs Cross-brand x86 or ARM processors)
Notas de projeto
The MC68020FE20E requires a well-regulated 5 V supply with bulk decoupling of at least 100 uF tantalum and 0.1 uF ceramic placed within 25 mm of the package pins. At 20 MHz the part draws substantial transient current during bus cycles; insufficient decoupling causes ground bounce and intermittent bus errors. Designers should use a low-impedance power plane rather than traces for the Vcc distribution.
Estimated: at typical HCMOS power dissipation of approximately 1.5 W to 2 W at 20 MHz, the ceramic CQFP package requires thermal management via board copper pours and possibly forced airflow. Theta_JA for a 132-CQFP on a 4-layer board with thermal vias is approximately 25-30 C/W, yielding a junction-to-ambient rise of 50-60 C above ambient at 2 W. Designers in enclosed aerospace chassis should verify thermal margins with the actual board stack-up.
The 132-CQFP ceramic package has 0.635 mm pitch gull-wing leads and is NOT compatible with standard surface-mount reflow profiles above 240 C. Most ceramic CQFP assemblies use socket-mounting, through-hole adapter PCBs, or low-temperature solder processes. Hand-soldering or hot-bar reflow is recommended. Designers should verify the assembly process matches the ceramic package's thermal limits before board fabrication.
At 20 MHz bus operation, address and data traces must be length-matched and impedance-controlled to 50 ohms microstrip or stripline to avoid skew-induced bus errors. The 68020 uses synchronous bus cycles that require all signals to settle within one clock period. Series damping resistors (22-33 ohm) on outputs can help reduce ringing on heavily loaded buses. Place clock generation (e.g., MC68000-compatible oscillator) within 50 mm of the CLK pin.
Common pitfalls include: (1) forgetting to provide the external MC68851 PMMU when virtual memory is required - without it the 68020 runs in flat-physical mode; (2) leaving bus request/grant (BR/BG) pins floating - they must be properly terminated or pulled to inactive states; (3) mixing 68020 and 68030 bus timing - while software-compatible, the bus protocols differ; (4) overlooking reset vector initialization - the 68020 reads the initial SP and PC from address 0x000000 at reset and these must be valid before RESET deassertion.
Informações de conformidade
RoHS compliant and lead-free per distributor catalog data as of 2026-10-16. REACH, halogen-free, and conflict-minerals status not explicitly stated in available sources; marked unknown. AEC-Q100 not applicable - this is a legacy MPU, not an automotive-qualified IC.
