MC908JL3EMDWE - HC08 8-bit MCU 4KB Flash 128B RAM 28-SOIC | NXP
N.º da peça: MC908JL3EMDWE ⚠ Última compra| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $5.4431 | $5,44 |
| 10 | $4.89 | $48,90 |
| 100 | $4.12 | $412,00 |
| 500 | $3.42 | $1.710,00 |
| 1.000 | $2.78 | $2.780,00 |
MC908JL3EMDWE Visão geral
Background: An 8-bit microcontroller is a small, self-contained computing element built around an 8-bit central processing unit (CPU), on-chip non-volatile program memory (Flash or ROM), volatile data memory (RAM), and a fixed set of peripherals such as timers, ADC, and serial interfaces. 8-bit MCUs occupy the low-power, low-cost end of the microcontroller taxonomy and sit beneath 16-bit, 32-bit (for example ARM Cortex-M0) and 64-bit microcontroller cores in computing power but typically above simple programmable logic and discrete timer circuits in integration. The HC08 family is one of the long-running M68HC08 architectures from Motorola/Freescale/NXP, optimized for cost-sensitive consumer, appliance, and industrial control applications.
Key features: the JTAG/Flash-resident debug interface supports in-circuit programming and real-time emulation; the 10-bit ADC with 8 channels provides enough resolution for sensor conditioning in HVAC, white goods, and simple motor control loops; the internal oscillator and PLL-less clocking simplify external BOM; and the security lock on Flash prevents unauthorized code readout. The 28-SOIC (wide-body) package with 0.295 inch (7.50 mm) body width supports hand-soldering-friendly prototyping while still being compatible with standard SOIC-28 land patterns.
From an architecture standpoint, the device uses the Freescale HC08 CISC-style core with a 16-bit stack pointer and 8-bit accumulator-based CPU, which keeps interrupt latency predictable for small real-time loops. The peripheral set is mapped through a memory-mapped register model rather than a modern peripheral-mapped descriptor scheme.
Typical applications include low-cost white-goods controllers (rice cookers, washing-machine user interfaces), thermostats and HVAC controllers, simple sensor-interface boards, remote controls, and replacement of legacy HC11 designs where modest code size, low power, and minimal external components are the deciding requirements.
Design tip: when migrating from the HC08 to a newer S08 platform (such as S08JM or S08QD families), pinout is generally not drop-in and code tools (CodeWarrior HC08 versus CodeWarrior S08) differ. Plan for compilation and pin re-mapping effort when designing in the JL3 if future migration is a possibility.
This page synthesizes distributor stock data, lifecycle notes, drop-in alternatives, and practical design commentary not found in the Freescale/NXP datasheet alone.
Alternativas drop-in para MC908JL3EMDWE — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC908JL3EMDWE (mesmo formato e footprint) — diferindo em Package, Product Type, Data Bus Width, Family, Program Memory Size.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MCR908JL3EMDWE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC908JL3ECDWE
✅ Drop-In✓ Em estoque
$6.0657 / unidade
Ver ficha técnica →MC908JL3EMDWE-FR
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →MCR908JL3ECDWE
✅ Drop-In✓ Em estoque
$4.45 / unidade
Ver ficha técnica →MC908JL8CDWE
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.45 / unidade
Ver ficha técnica →MC908JL3EMDWE Classificações máximas e características elétricas
| Manufacturer | NXP USA Inc. (formerly Freescale Semiconductor) |
| Product Type | 8-bit Microcontroller (MCU) |
| Core Architecture | HC08 (M68HC08 family), 8-bit CISC |
| Program Memory | 4 KB Flash (4K x 8) |
| RAM | 128 B |
| CPU Clock Speed | 8 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V (data shown for 5 V operation) |
| A/D Converter | 10-bit, up to 8 channels |
| Encapsulamento | 28-SOIC W (wide-body, 0.295 inch / 7.50 mm) |
| Contagem de pinos | 28 |
| Tipo de montagem | Surface Mount |
Configuração de pinos do MC908JL3EMDWE
| Pino 1 | IRQ — External interrupt request input (with internal pull-up) |
| Pino 2 | TCLK — Timer external clock input |
| Pino 3 | RST — Active-low reset input |
| Pino 4 | VSS — Ground |
| Pino 5 | VDD — Supply voltage |
| Pino 6 | PTA0/TCH0 — Port A bit 0 / Timer Channel 0 |
| Pino 7 | PTA1/TCH1 — Port A bit 1 / Timer Channel 1 |
| Pino 8 | PTA2 — Port A bit 2 |
| Pino 9 | PTA3 — Port A bit 3 |
| Pino 10 | PTA4 — Port A bit 4 |
| Pino 11 | PTA5 — Port A bit 5 |
| Pino 12 | PTA6 — Port A bit 6 |
| Pino 13 | PTA7 — Port A bit 7 |
| Pino 14 | PTB0/AD0 — Port B bit 0 / ADC channel 0 |
| Pino 15 | PTB1/AD1 — Port B bit 1 / ADC channel 1 |
| Pino 16 | PTB2/AD2 — Port B bit 2 / ADC channel 2 |
| Pino 17 | PTB3/AD3 — Port B bit 3 / ADC channel 3 |
| Pino 18 | PTB4/AD4 — Port B bit 4 / ADC channel 4 |
| Pino 19 | PTB5/AD5 — Port B bit 5 / ADC channel 5 |
| Pino 20 | PTB6/AD6 — Port B bit 6 / ADC channel 6 |
| Pino 21 | PTB7/AD7 — Port B bit 7 / ADC channel 7 |
| Pino 22 | PTC0/SPSCK — Port C bit 0 / SPI clock |
| Pino 23 | PTC1/MOSI — Port C bit 1 / SPI MOSI |
| Pino 24 | PTC2/MISO — Port C bit 2 / SPI MISO |
| Pino 25 | PTC3/SS — Port C bit 3 / SPI slave select |
| Pino 26 | PTC4/TxD — Port C bit 4 / SCI TxD |
| Pino 27 | PTC5/RxD — Port C bit 5 / SCI RxD |
| Pino 28 | PTC6/OSC — Port C bit 6 / Oscillator |
Aplicações típicas
MC908JL3EMDWE é adequado para 6 aplicaçãos: White-Goods Appliance Controllers, HVAC Thermostat and Sensor Interface Boards, Universal Remote and Toy Controllers, Industrial Sensor Pre-Processing Modules, Legacy HC11 Replacement Boards, Low-Cost Educational and Trainer Boards.
White-Goods Appliance Controllers
The MC908JL3EMDWE is well-suited to white-goods controllers such as rice cookers, washing-machine user interface boards, and microwave key panels where BOM cost dominates MCU selection. Its 4 KB Flash and 128 B RAM are sufficient to host state-machine control firmware for timers, mode-selection logic, and relay driving, while the integrated 10-bit ADC reads NTC thermistors and sense resistors. The 28-SOIC W package is hand-solder friendly, easing small-scale prototype work. Pin-for-pin compatibility with the JL8 allows a single PCB layout to serve both entry-level and feature-rich SKUs.
Recomendado
HVAC Thermostat and Sensor Interface Boards
Designed into low-cost HVAC thermostat or sensor-interface boards, the MC908JL3EMDWE provides 8-channel 10-bit ADC resolution adequate for thermistor temperature sensing and potentiometer-based temperature setpoint reading, plus a UART for remote or wired-networking modules. The 8 MHz CPU rate and CISC single-byte instruction reach are sufficient for proportional-control loops running at sub-second update rates. The 28-pin SOIC W footprint simplifies routing alongside relay drivers and triacs. For non-critical indoor climate appliances, this HC08 remains a cost-effective, well-supported choice.
Recomendado
Universal Remote and Toy Controllers
The MC908JL3EMDWE is appropriately scaled for toy controllers, IR remote controls, and small consumer devices that need PWM output, a UART/SPI interface, and low sleep current. The HC08's tiny RAM footprint and clean interrupt structure permit real-time IR protocol generation (RC5, NEC) while free timers drive PWM for motor/LED animation. Because the part remains in last-time-buy, designers targeting this application should validate long-term supply with NXP before committing high-volume SKUs.
Recomendado
Industrial Sensor Pre-Processing Modules
Industrial sensor pre-processing modules (e.g., strain-gauge bridge excitation units, isolated signal-conditioner boards) can host the MC908JL3EMDWE for local calibration, averaging, and digital conversion of multiple analog channels. The 10-bit ADC quantizes sensor output, while the SCI serves as a downstream diagnostics or tower-line interface. Designers will appreciate the deterministic HC08 interrupt latency for time-stamping sample pipelines. Note the part is in last-time-buy; for new designs, choose a NXP S08QD-family successor instead.
Recomendado
Legacy HC11 Replacement Boards
Engineers retrofitting outdated HC11-based boards often migrate to the MC908JL3EMDWE because the HC08 core preserves the M68K-derived programming model and absolute-addressed register set, minimizing firmware churn. Its 28-SOIC W package likewise fits legacy pads designed for SOJ or DIP-style controllers. The new part adds Flash and an integrated ADC, replacing multiple support parts. Use as a bridge component while larger code-base rewrites are scheduled over a multi-quarter plan.
Recomendado
Low-Cost Educational and Trainer Boards
Because the MC908JL3EMDWE is widely documented, widely stocked second-hand, and ships in a hand-solderable 28-SOIC package, it is a popular target for university microcontroller labs and product-training kits. Programming tools such as P&E USB-ML-08 plus CodeWarrior HC08 IDE give students a real-world debugging experience including single-stepping, watchdogs, and Flash security. Even at last-time-buy status, distributor stock levels (Heisener lists >1 million pieces) keep lab replenishment feasible through at least one calendar year.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC908JL3EMDWE — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCR908JL3EMDWE | MC908JL3ECDWE | MC908JL3EMDWE-FR | MCR908JL3ECDWE | MC908JL8CDWE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors (Rochester) | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors (Rochester) | NXP Semiconductors |
| Package | 28-SOIC W | 28-SOIC W - same | 28-SOIC W - same | 28-SOIC W - same | 28-SOIC W - same | 28-SOIC W - same |
| Core / Architecture | HC08 8-bit CISC | HC08 8-bit CISC | HC08 8-bit CISC | HC08 8-bit CISC | HC08 8-bit CISC | HC08 8-bit CISC |
| Flash Memory | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 8 KB |
| RoHS / Reflow Profile | JEDEC Pb-free reflow (E suffix) | JEDEC Pb-free reflow (E suffix) | Non-JEDEC leaded (C suffix) | Freescale JEDEC Pb-free factory reel | Non-JEDEC leaded via Rochester | Non-JEDEC leaded (C suffix) |
| Lifecycle Status | Last-Time-Buy (EOL announced) | Active (Rochester after-market) | Last-Time-Buy (EOL announced) | Last-Time-Buy (Freescale original) | Active (Rochester after-market) | Last-Time-Buy (EOL announced) |
Principais diferenciais
- Rochester authorized after-market guarantees long-term supply (vs MC908JL3ECDWE)
- Pin-for-pin compatible across E and EMDWE variants (vs MC908JL8CDWE)
- Heisener distributor showed >1 million-piece stock as of 2026-10-18 (vs Other EOL HC08 variants)
Notas de projeto
The MC908JL3EMDWE operates from a single 2.7 V to 5.5 V supply on the VDD pin (pin 5), with VSS (pin 4) as ground. Decouple VDD with a 100 nF ceramic bypass placed within 5 mm of the VDD pin and a bulk 10 uF aluminum or tantalum at the regulator output. The internal regulator can be susceptible to noise coupling during in-circuit programming; isolate VDD from relay-driver rails using a ferrite bead or LC pi-filter when the MCU shares a supply with inductive loads.
Route ADC inputs (PTB0 through PTB7) with short traces and avoid running them parallel to switching-relay drive signals. Use a separate analog ground island under the ADC-sensitive pads and join it to VSS only at the MCU VSS pin. The 28-SOIC W package leaves sufficient room for a ground pour on a 2-layer board; on 4-layer stack-ups, place a dedicated ground plane directly under the SOIC to minimize digital switching noise coupling into the analog ports.
Estimated: the 28-SOIC W body width is 7.50 mm (0.295 in) - this is the wide-body SOIC, not the narrow SOIC-28 used on SOP-8-class parts. Library symbols labeled 'SOIC-28' from generic PCB libraries are typically SO-16-width; ensure the footprint references 1.27 mm pitch between pins and a 7.50 mm body to match the MC908JL3EMDWE. Misfootprints commonly require hand-soldering rework because no commercial socketed adapter fits.
The HC08 IRQ pin (pin 1) is edge-sensitive with an internal pull-up configuration, but shares an interrupt vector with other peripherals. To debounce mechanical switches wired to IRQ, add a 100 nF cap to GND and a 10 kohm series resistor. The OSC pin (pin 28) should not be used as a GPIO without removing the internal oscillator option, which can lock the MCU if the configuration bits are inconsistent.
Because NXP has flagged the MC908JL3EMDWE as last-time-buy/end-of-life, any new design should NOT be based on the JL3 raw MPN alone. Place parallel-source orders that also cover MCR908JL3EMDWE (Rochester Electronics authorized after-market) and MC908JL3EMDWE-FR (Freescale original factory reel). For new greenfield designs, migrate to the S08QD or S08JM family - same HC08/S08 toolchain experience but modern peripherals and active roadmap.
Informações de conformidade
Verified web data does not surface explicit RoHS/REACH statements; the E suffix in the MPN denotes JEDEC Pb-free reflow profile per NXP naming convention, but the formal compliance certificate was not present in the search results and is marked [DATA_NEEDED]. The part is not AEC-Q100 qualified and is not intended for automotive use.
