MC9S08LL64CLH - 40MHz 64KB 8-Bit MCU | NXP | LQFP-64
N.º da peça: MC9S08LL64CLH ✗ Fim de vidaMC9S08LL64CLH Visão geral
The S08LL family is an energy-efficient 8-bit MCU architecture built around the HCS08 central processing unit. The processor operates up to 40 MHz across the stated 2.1 V to 3.6 V operating range, while the device includes 64 KB of Flash for program storage and 4 KB of RAM for working memory. This combination provides enough memory for control firmware, calibration data, display routines, and communication handlers without requiring external memory in many designs. A segment LCD driver is particularly useful for low-cost, low-power human-interface designs.
The MC9S08LL64CLH provides an 8-bit MCU with integrated mixed-signal capability and low-power features intended to extend battery life. Its 40 MHz operating speed supports responsive control loops and time-sensitive peripheral operations, while the S08 architecture simplifies code development compared with more complex general-purpose processors. The 64-LQFP package exposes the complete set of I/O, communication, timer, analog, and display-related functions required for embedded control.
The device is manufactured in a surface-mount LQFP-64 package and is identified by the manufacturer as NRND. For new production programs, engineers should verify the current product-change and purchasing information before committing the part to a long-lived design. The MC9S08LL64 series also includes MC9S08LL36, which provides a different Flash capacity within the same family and should be checked when memory requirements change.
Typical applications include low-cost medical diagnostic equipment, handheld appliances, energy meters, simple industrial controls, and battery-operated products with local LCD displays. The 8-bit architecture is particularly effective when the firmware performs sensor acquisition, display formatting, button handling, and low-speed serial communication. The 40 MHz CPU leaves performance margin for control routines while the low-power architecture supports systems that spend substantial time in standby or reduced-activity states.
Designers should pay close attention to the 2.1 V to 3.6 V operating range, decoupling requirements, oscillator selection, and the pin assignment of the 64-LQFP footprint. The integrated LCD and ADC functions can reduce board complexity, but their electrical limits and pin multiplexing should be checked against the manufacturer datasheet before finalizing the PCB. For production sourcing, request current lifecycle status and lead time through the Request a Quote form on this page.
Alternativas drop-in para MC9S08LL64CLH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC9S08LL64CLH (mesmo formato e footprint) — diferindo em Flash Organization, Package, Product Type, RAM, Series.
MC9S08LL36CLH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S08LL16CLH
✅ Drop-InConsulte o preço
Ver ficha técnica →MC9S08LH64CLH
✅ Drop-InConsulte o preço
Ver ficha técnica →MC9S08LL64CLH Classificações máximas e características elétricas
| Product Type | 8-bit HCS08 microcontroller |
| CPU Maximum Frequency | 40 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 |
| RAM | 4 KB |
| Operating Voltage Range | 1.8 V to 3.6 V |
| CPU Voltage Range | 2.1 V to 3.6 V |
| Faixa de temperatura de operação | -40 °C to +85 °C |
| Encapsulamento | 64-lead LQFP, 10 mm x 10 mm |
| Tipo de montagem | Surface mount |
| Core | S08 core / HCS08 CPU |
| Architecture | 8-bit |
| Display Support | Segment LCD driver |
Guia de Configuração de Pinos do MC9S08LL64CLH 64-lead lqfp, 10 mm x 10 mm
Configuração de pinos para MC9S08LL64CLH (pacote 64-lead lqfp, 10 mm x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC9S08LL64CLH.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC9S08LL64CLH é adequado para 6 aplicaçãos: Medical Diagnostic Instruments, Handheld Appliances, Energy Metering Equipment, Industrial Control Modules, Segment LCD User Interfaces, Battery-Powered Sensor Nodes.
Medical Diagnostic Instruments
The MC9S08LL64CLH fits compact diagnostic instruments where a low-power 8-bit MCU can coordinate sensors, buttons, status LEDs, and a local LCD. Its 40 MHz HCS08 CPU provides control-loop margin, while 64 KB of Flash stores firmware and 4 KB of RAM supports display formatting and measurement handling. The 1.8 V to 3.6 V operating range accommodates low-voltage battery and regulated power systems. Designers should verify ADC accuracy, medical-system isolation, and applicable safety requirements separately from the MCU specifications.
Recomendado
Handheld Appliances
Battery-powered handheld appliances benefit from the MC9S08LL64CLH because the S08LL architecture combines an 8-bit control processor with low-power features and a segment LCD driver. The 40 MHz CPU is sufficient for user-interface logic, sensor interpretation, and non-display communication, while 64 KB of Flash reduces the need for external program memory in suitable designs. Its 1.8 V to 3.6 V supply range supports compact energy-conscious products. Standby-current targets and display readability should be evaluated with the complete power architecture rather than inferred from CPU frequency alone.
Recomendado
Energy Metering Equipment
The MC9S08LL64CLH is suited to metering equipment that must capture low-level signals, maintain calibrated data, and drive a local segment display. Its 8-bit S08 CPU runs up to 40 MHz, providing enough throughput for measurement sequencing and communication tasks, while the 4 KB RAM supports working buffers. The 64 KB Flash can hold calibration tables and operating firmware. NXP also positions the S08LH family for metering applications with increased ADC accuracy, so MC9S08LH64CLH may be considered when signal fidelity is a priority.
Recomendado
Industrial Control Modules
The MC9S08LL64CLH can serve as the control processor in compact industrial modules requiring deterministic low-power operation, local status display, and modest communications processing. The 40 MHz S08 CPU and 64 KB Flash accommodate control firmware, configuration data, and peripheral drivers, while the 64-lead LQFP provides broad pin access for external interfaces. Use the manufacturer pinout to map timers, serial ports, and analog inputs correctly. Production designs should also account for the NRND lifecycle status and verify availability before long-term commitment.
Recomendado
Segment LCD User Interfaces
The MC9S08LL64CLH is appropriate for products using a segment LCD because the S08LL family includes an integrated segment LCD driver. The MCU can update display segments while handling key input, product-state logic, and low-speed communications without a separate display controller. Its 40 MHz performance and 64 KB Flash allow more elaborate menu, calibration, and diagnostic routines than the 16 KB MC9S08LL16CLH. Electrical compatibility with the selected LCD module and the permitted multiplexing arrangement must be confirmed from the manufacturer datasheet.
Recomendado
Battery-Powered Sensor Nodes
The MC9S08LL64CLH can coordinate sensors and communicate results in a compact battery-powered node where an 8-bit MCU provides adequate performance and low standby energy are priorities. Its 1.8 V to 3.6 V operating range supports common low-voltage systems, while 64 KB of Flash preserves room for protocol handlers and local filtering. The S08LH family, represented by MC9S08LH64CLH, offers an alternative optimized around ultra-low-power operation and higher ADC accuracy. Final power performance depends on the selected mode, oscillator, and peripheral configuration.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S08LL64CLH — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S08LL36CLH | MC9S08LL16CLH | MC9S08LH64CLH |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-lead LQFP (10 mm x 10 mm) | 64-lead LQFP (10 mm x 10 mm) | 64-lead LQFP (10 mm x 10 mm) | 64-lead LQFP (10 mm x 10 mm) |
| CPU Architecture | 8-bit HCS08 / S08 core | 8-bit HCS08 / S08 core | 8-bit HCS08 / S08 core | 8-bit S08 family |
| Flash Memory | 64 KB | 36 KB | 16 KB | Up to 64 KB |
| Segment LCD Support | Yes | Yes | Yes | Yes |
| ADC Accuracy Positioning | Standard S08LL implementation | Standard S08LL implementation | Standard S08LL implementation | Increased ADC accuracy |
Principais diferenciais
- Largest directly documented Flash capacity within the listed S08LL alternatives (vs MC9S08LL36CLH)
- Substantially more program storage than the 16 KB S08LL variant (vs MC9S08LL16CLH)
- Standard S08LL architecture with integrated segment LCD support (vs MC9S08LH64CLH)
Notas de projeto
Design the supply network for the MC9S08LL64CLH within its 1.8 V to 3.6 V operating range and account for separate CPU voltage conditions in the manufacturer specification. Place the required bulk and bypass capacitors close to the supply and ground pins, using the exact values and layout guidance in the MC9S08LL64 series datasheet. Do not infer low-power performance from the 40 MHz maximum clock because standby and active current depend on clocking, peripherals, and the selected operating mode.
Assign all 64 LQFP leads from the NXP pin-connection table before routing the PCB. The segment LCD, ADC, timers, and communication functions may use multiplexed pins, so reserving the wrong functions can force a costly layout change. Keep sensitive analog inputs away from high-current switching paths and provide a common, low-impedance ground reference for analog measurements. Follow the manufacturer land pattern rather than constructing a generic 64-lead LQFP footprint.
Do not treat MC9S08LL16CLH as a transparent replacement when the firmware requires more than 16 KB of Flash, and do not assume MC9S08LH64CLH is equivalent solely because both provide 64 KB. Check the memory map, device identification value, pin muxing, ADC behavior, low-power modes, and software support before substitution. The MC9S08LL64CLH is marked NRND, so confirm lifecycle and supply status before beginning a new production release.
Informações de conformidade
The exact ordering code was not shown with explicit material-compliance statements. Request current manufacturer compliance documentation for production release. AEC-Q100 qualification is not indicated for this device.