MC9S08RC60FG - 8-Bit 8MHz 60KB Flash MCU | NXP | LQFP
N.º da peça: MC9S08RC60FG ✗ Fim de vidaMC9S08RC60FG Visão geral
An S08 microcontroller is an 8-bit embedded-control platform within the broader hierarchy of microcontrollers, embedded processors, and semiconductor devices. The MC9S08RC60FG combines a byte-oriented processor core, Flash program memory, and integrated peripherals in a surface-mount package. This combination allows control logic, communications, and product-specific functions to be consolidated without requiring a separate external memory device when the application's requirements fit within the available resources.
The headline device characteristics are an 8-bit processing architecture, an 8 MHz operating clock, and 60 KB of Flash memory. Its 44-LQFP package provides 44 externally accessible or assigned positions and is offered in a 10 mm by 10 mm physical format. The MC9S08RC60FG is therefore suited to compact embedded controllers where deterministic firmware execution, integrated nonvolatile storage, and moderate logic complexity are more important than high processor throughput.
The S08 architecture is intended for embedded products in which peripherals and firmware can be assigned directly to application functions. Compared with a larger 16- or 32-bit processor, an 8-bit controller can provide sufficient computation for motor, display, appliance, and industrial-control tasks while preserving a straightforward programming model. The 60 KB Flash allocation provides meaningful firmware space for protocol handling, state machines, calibration data, and background routines, although final memory budgeting must include the linker map and boot-code requirements.
Typical uses include appliance controllers, small motor-control boards, keypad and display interfaces, instrumentation, industrial modules, and low-cost embedded products. A design may use the MCU to read inputs, execute a control algorithm, update an output, and manage communication through its integrated peripherals. The 8 MHz clock supports straightforward event-driven firmware, while the available Flash supports more extensive application code than many compact 8-bit controllers.
The principal design consideration is to verify the exact peripheral allocation, electrical limits, reset behavior, and programming configuration for the MC9S08RC60FG. Engineers should preserve the 44-LQFP land pattern, follow the manufacturer's decoupling and signal-routing guidance, and confirm the controller's unused-pin requirements. Review the complete pin-description and connection tables in the manufacturer datasheet before assigning every package terminal.
This product page organizes the confirmed device identity, package, clock, memory, sourcing path, and engineering considerations into one engineering reference. It also distinguishes confirmed characteristics from parameters that require confirmation in the full manufacturer documentation, helping designers make a faster and safer component-selection decision.
Alternativas drop-in para MC9S08RC60FG — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasMC9S08RC60FG Classificações máximas e características elétricas
| Processor Architecture | 8-bit |
| Frequência máxima de clock | 8 MHz |
| Flash Memory | 60 KB |
| Flash Organization | 60K x 8 bits |
| Encapsulamento | 44-LQFP |
| Package Body Size | 10 mm x 10 mm |
| Tipo de montagem | Surface Mount |
| Series | S08 |
| Core Type | S08 8-bit embedded processor |
| Program Memory Type | Flash |
Guia de Configuração de Pinos do MC9S08RC60FG 10 mm x 10 mm
Configuração de pinos para MC9S08RC60FG (pacote 10 mm x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC9S08RC60FG.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC9S08RC60FG é adequado para 6 aplicaçãos: Appliance Control, Small Motor and Relay Control, Keypad and Display Interface, Industrial Sensor Interface, Communication and Protocol Controller, Programmable Control Module.
Appliance Control
The MC9S08RC60FG fits compact appliance-control boards that combine several digital inputs, actuator outputs, display states, and product-specific logic. Its 8 MHz S08 processor provides deterministic execution for state machines, while 60 KB of Flash creates useful room for operating modes, calibration tables, communication routines, and fault handling. The 44-LQFP package also supports conventional automated assembly without requiring a fine-pitch BGA process. Before schematic release, confirm the required GPIO, timers, communication channels, voltage range, and reset behavior in the manufacturer documentation.
Recomendado
Small Motor and Relay Control
The MC9S08RC60FG can serve as the supervisory controller in a small motor, solenoid, or relay-control module. Its 8-bit processing core is appropriate for timing sequences, interlocks, debouncing, fault detection, and configurable output updates, while 60 KB of Flash provides space for application code beyond a minimal sequencer. The controller does not itself replace power-stage transistors, isolation, flyback components, or motor drivers. Those external circuits must be sized independently, and every timer, pin, and peripheral required by the motor algorithm must be confirmed in the datasheet.
Recomendado
Keypad and Display Interface
The MC9S08RC60FG is appropriate for a keypad, menu, or segment-display controller that translates user input into device states. The 8 MHz S08 core can scan inputs, debounce contacts, update display commands, and maintain interface timing, while the 60 KB Flash allocation can hold fonts, lookup tables, animation logic, and multiple product menus. Engineering teams should verify whether the required display interface is implemented by the integrated peripherals or requires general-purpose GPIO. Pin multiplexing, timing, drive strength, and package-level escape routing must be checked before the PCB layout is frozen.
Recomendado
Industrial Sensor Interface
The MC9S08RC60FG can be used in a compact industrial sensor interface that acquires digital inputs, processes them locally, and communicates status to a higher-level controller. The S08 architecture's 8 MHz clock supports practical event handling and protocol servicing, and 60 KB of Flash provides room for calibration, filtering, diagnostics, and configurable behavior. For analog sensors, confirm whether the application needs the MCU's internal conversion resources or a dedicated external converter. Isolation, surge protection, grounding, and connector design remain separate engineering tasks and must be matched to the installation environment.
Recomendado
Communication and Protocol Controller
The MC9S08RC60FG is suitable for a dedicated protocol or communication controller when the application remains within its 8-bit processing and 60 KB Flash budget. Firmware can maintain framing, validate commands, track device state, and coordinate local I/O while leaving higher-level processing to another system. The available serial interfaces, baud-rate behavior, electrical levels, and buffering requirements must be confirmed in the family documentation. Designers should also budget protocol tables and application code from the linker map and leave headroom for future variants rather than filling the complete 60 KB nominally.
Recomendado
Programmable Control Module
The MC9S08RC60FG can serve as the core of a programmable embedded module with application-specific logic, status indication, and field communication. The 60 KB Flash capacity is meaningful for a standalone controller because it can hold boot handling, configuration, diagnostics, and operating routines in one package. A production design should include a defined reset and clock strategy, programming access, decoupling, debug observability, and a documented recovery method. Because the 44-LQFP package exposes many assigned terminals, the complete pin table and recommended application circuit should be followed without substituting generic LQFP assumptions.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S08RC60FG — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Processor Architecture | 8-bit |
| Maximum Clock Frequency | 8 MHz |
| Flash Memory | 60 KB (60K x 8 bits) |
| Program Memory Type | Flash |
| Package | 44-LQFP (10 mm x 10 mm) |
| Brand | NXP Semiconductors |
| Series | S08 |
| Mounting Type | Surface Mount |
Principais diferenciais
- Confirmed 60 KB embedded Flash configuration (vs MC9S08QE4CTG)
- Established 8 MHz S08 control platform (vs C8051F120R)
- Compact 10 mm by 10 mm surface-mount package (vs C8051F310R)
Notas de projeto
Preserve the manufacturer-defined 44-LQFP land pattern and verify pin 1 orientation against the package drawing before releasing Gerber files. Place the required input and output decoupling capacitors close to their associated supply pins, with short ground returns and a quiet ground reference for attached communications or sensing circuits. Because the exposed package assignments are defined by the family documentation, do not infer unused terminals or alternate functions from another LQFP device.
Confirm the operating-voltage range, absolute maximum ratings, and internal peripheral supply requirements in the manufacturer datasheet before selecting the board power architecture. Ensure the regulator can source the required peak current for the MCU, attached communications, indicators, and any external circuitry. Keep switching supplies and their inductors away from sensitive analog or communication nodes, and follow the recommended grounding and bypass arrangements to prevent supply ripple from disrupting embedded-control behavior.
Do not treat another MC9S08RC60 suffix as interchangeable without checking the exact package, temperature grade, pin functions, memory map, and peripheral options. The 60 KB Flash figure must also be reconciled against the final linker map because boot code, option data, and application routines affect available program space. Record the programming configuration, clock source, reset behavior, and debug connection in the production documentation so firmware and manufacturing teams use the same device configuration.
Assign communication, timer-sensitive, and externally accessible signals according to the datasheet's multiplexing rules rather than selecting pins solely for routing convenience. Keep clock and debug routes short, maintain continuous ground references beneath signal paths where practical, and separate potential switching-node copper from sensitive inputs. For exposed assembly and test points, allow access required by the selected programming and debug method without changing the component package or its pin-to-pin assignments.
Informações de conformidade
Compliance attributes require confirmation in the current manufacturer product documentation or the applicable material declaration.