MC9S08RD60CPE-FR - 8-Bit 8MHz 60KB Flash MCU | NXP
N.º da peça: MC9S08RD60CPE-FR ✗ Fim de vidaMC9S08RD60CPE-FR Visão geral
A microcontroller is a programmable semiconductor that combines a processor core, memory, input/output ports, and peripherals in one integrated circuit. In the system hierarchy, the MC9S08RD60CPE-FR belongs to the 8-bit microcontroller family, with an S08 CISC core and embedded flash memory. It is intended for industrial control, appliance control, instrumentation, communications, and general-purpose embedded products where a compact controller can manage sensors, actuators, user interfaces, and communication tasks.
The verified specifications identify an S08 core, 8-bit architecture, 8 MHz speed, 60 KB flash organized as 60K x 8, 2K x 8 RAM, 23 I/O pins, SCI connectivity, PWM, a watchdog timer, low-voltage detection, and power-on reset. These features allow the MCU to provide a self-contained control platform without requiring separate program-memory devices. The 28-PDIP package also supports conventional through-hole PCB assembly and breadboard or prototype construction.
The MCU's architecture combines an 8-bit S08 CISC processor with embedded flash and peripheral functions optimized for embedded control. SCI connectivity supports serial data exchange, while PWM supports time-based output generation. The watchdog timer, low-voltage detection, and power-on reset functions help system designers implement supervision and controlled startup behavior. These features are useful in systems requiring basic fault handling without a higher-complexity control architecture.
Typical applications include appliance and domestic equipment controllers, motor or actuator supervisory systems, simple serial communications equipment, industrial sensors, keypad and display interfaces, and low-cost embedded automation products. The 8 MHz operating frequency provides a practical balance between processing capability, power consumption, and implementation simplicity for these applications. Engineers should verify peripheral mappings, timing requirements, and memory utilization against the manufacturer documentation before production release.
A key design consideration is that this part is listed as obsolete in the supplied verified data. New designs should therefore confirm lifecycle status and sourcing with the manufacturer or an authorized distributor before committing to the MPN. For existing equipment, preserve the original controller and validate any replacement for pin, electrical, timing, and firmware compatibility rather than assuming that a similar S08 device is interchangeable.
This product page consolidates the verified distributor specifications, package identity, lifecycle information, application context, and replacement limitations for MC9S08RD60CPE-FR. It is intended to support engineering evaluation while clearly separating confirmed data from parameters that require additional verification.
Alternativas drop-in para MC9S08RD60CPE-FR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
MC9S08RD60CPE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S08RD60CPE-FR Classificações máximas e características elétricas
| Core Processor | S08 |
| Processor Architecture | 8-bit CISC |
| Operating Frequency | 8 MHz |
| Program Memory | 60 KB flash (60K x 8) |
| RAM | 2K x 8 |
| Number of I/O | 23 |
| Tensão de alimentação | 2.5 V / 3.3 V |
| Connectivity | SCI |
| Peripheral | LVD |
| Peripheral | POR |
| Peripheral | PWM |
| Peripheral | WDT |
| Encapsulamento | 28-PDIP |
| Tipo de montagem | Through-hole |
| Product Status | Obsolete |
| Lead-Free | Yes, according to the Mouser listing |
Guia de Configuração de Pinos do MC9S08RD60CPE-FR 28-pdip
Configuração de pinos para MC9S08RD60CPE-FR (pacote 28-pdip). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC9S08RD60CPE-FR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC9S08RD60CPE-FR é adequado para 6 aplicaçãos: Appliance and Domestic Equipment Control, Industrial Sensor Interface, Motor and Actuator Management, Serial Communication Equipment, Keypad, Display, and User Interface Control, Legacy Product Maintenance and Obsolescence Support.
Appliance and Domestic Equipment Control
The MC9S08RD60CPE-FR fits appliance-control boards that combine a modest embedded program with real-time input scanning and controlled actuator outputs. Its S08 8-bit core and 8 MHz operating speed are appropriate for sequencing motors, relays, lamps, buttons, and sensors, while 60 KB flash provides room for application logic and state-machine firmware. PWM can support timing functions for motors or indicators, and SCI provides a path to external modules or service interfaces. The 28-PDIP package simplifies through-hole prototyping and repair. Because the verified status is obsolete, new appliance designs should confirm supply before committing, while existing products can use the part for controlled maintenance sourcing.
Recomendado
Industrial Sensor Interface
For industrial sensor-interface modules, the MC9S08RD60CPE-FR provides a compact 8-bit control platform with 23 I/O pins and 2K x 8 RAM for buffering measurements and coordinating peripheral activity. SCI connectivity can support a sensor or service port, while low-voltage detection and power-on reset help the controller identify abnormal supply or startup conditions. PWM may be used for excitation, timing, or actuator-control functions when the system architecture requires it. The 8 MHz S08 core is suitable for deterministic polling and control functions rather than complex mathematical workloads. Validate signal levels, timing margins, isolation, and industrial environmental requirements separately because those details are not present in the supplied verified data.
Recomendado
Motor and Actuator Management
The MC9S08RD60CPE-FR is suitable for basic motor and actuator management where a controller must interpret inputs and generate timed outputs. PWM is identified in the verified peripheral list, making it relevant to motor-speed, position, or repetitive-control functions, while the 8 MHz S08 processor can execute the associated control state machine. The 23-I/O count provides a practical interface resource for sensors, limit switches, drivers, and status indicators. The device should not be assumed to drive loads directly; external transistors, driver circuits, protection, and current limits are required. Because the part is obsolete, a replacement should be evaluated against PWM frequency, pin multiplexing, timing, and firmware behavior.
Recomendado
Serial Communication Equipment
The MC9S08RD60CPE-FR is appropriate for low- to moderate-speed serial equipment that uses SCI as its principal communications interface. Its 8-bit S08 core can handle framing, command parsing, status reporting, and supervisory logic, while flash program memory supports a more capable embedded application than a small fixed-function controller. SCI connectivity also makes the device suitable for service ports, configuration interfaces, or links to external sensors and modules. The supplied data does not specify baud-rate tolerance, SCI feature set, or transceiver requirements, so the manufacturer datasheet and selected interface components must be reviewed. Through-hole 28-PDIP construction is useful where serviceability and prototype rework are important.
Recomendado
Keypad, Display, and User Interface Control
The MC9S08RD60CPE-FR can serve as the controller for a compact keypad, indicator, display, or menu interface. Its 23 available I/O lines support digital keys, indicators, and interface-control signals, while 60 KB flash provides storage for firmware, lookup tables, and interaction logic. The 8 MHz processing rate is suitable for scanning and debouncing tasks in many embedded products, and PWM can drive indicators or selected display-related timing functions. The 28-PDIP package is convenient for through-hole development boards and repairable equipment. Display-specific requirements, such as segment count, driver voltage, communication protocol, and timing, are not provided in the verified data and must be confirmed before design release.
Recomendado
Legacy Product Maintenance and Obsolescence Support
The MC9S08RD60CPE-FR is relevant to maintenance programs for products designed around the S08 family and 28-PDIP through-hole construction. Obsolete status does not eliminate the need for a qualified replacement strategy; it increases the importance of preserving firmware, checking every pin, and confirming electrical and timing compatibility. Engineers should document the original clock, memory map, SCI configuration, PWM use, reset behavior, watchdog settings, and board-level constraints before sourcing any alternative. The verified data does not provide a validated drop-in replacement, so service engineers should use manufacturer documentation and cross-reference tools to qualify any substitute. This application is primarily for continuity and repair rather than unrestricted new-product adoption.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S08RD60CPE-FR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S08RD60CPE |
|---|---|---|
| Package | 28-PDIP | 28-PDIP |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Core Processor | S08 | S08 |
| Processor Architecture | 8-bit CISC | 8-bit CISC |
| Operating Frequency | 8 MHz | 8 MHz |
| Program Memory | 60 KB flash (60K x 8) | 60 KB flash (60K x 8) |
| RAM | 2K x 8 | 2K x 8 |
| Connectivity | SCI | SCI |
| Peripherals | LVD, POR, PWM, WDT | LVD, POR, PWM, WDT |
| I/O | 23 | 23 |
Principais diferenciais
- Provides 60 KB of flash with 8-bit S08 processing (vs MC9S08RD60CPE)
- 28-PDIP through-hole package supports serviceable and prototype assembly (vs MC9S08RD60CPE)
- Integrated serial and supervisory control functions (vs MC9S08RD60CPE)
Notas de projeto
Do not treat the -FR suffix and the non-FR MC9S08RD60CPE listing as automatically interchangeable. The supplied results identify the same broad S08 and 28-PDIP configuration but do not define the suffix-specific temperature, packaging, or commercial differences. Before substitution, compare the manufacturer ordering-information table, full pinout, electrical limits, clock behavior, and device status. For legacy firmware, also confirm that the replacement preserves interrupt vectors, memory-map assumptions, watchdog timing, and SCI peripheral behavior.
Design the 2.5 V or 3.3 V supply rail with the exact operating limits from the manufacturer datasheet. The verified data confirms the stated supply options but does not provide current consumption, dropout behavior, absolute maximum ratings, or startup sequencing. Therefore, verify the power-supply tolerance, decoupling recommendations, ground return path, and current margin before layout release. Treat 0.00 pricing and any inferred availability as placeholders or commercial indicators, not technical performance data.
The 28-PDIP package is suited to through-hole assembly and prototype rework, but PCB layout still requires correct pin numbering, adequate clearance around adjacent leads, and stable power and ground distribution. Place required decoupling capacitors close to their associated pins according to the manufacturer recommendation, and route SCI signals away from switching nodes and high-current actuator paths. Since the complete pin assignment is unavailable in the supplied data, do not finalize a footprint or wiring drawing from memory.
Keep SCI and other digital interfaces short, appropriately terminated, and isolated from PWM outputs or motor-driver switching nodes. Although the 8 MHz S08 core is modest, edge-rate control, grounding, and supply-noise management still determine reliable communication. SCI baud-rate limits, input thresholds, and peripheral multiplexing must be verified in the complete manufacturer datasheet. If the controller sits near relays, motors, or long cables, add the required protection and isolation rather than relying only on firmware filtering.
The verified data does not provide a thermal rating, maximum junction temperature, or power dissipation limit for the MC9S08RD60CPE-FR. For an 8 MHz embedded controller, calculate dissipation from the actual supply voltage and measured or datasheet-supported operating current rather than estimating from the CPU frequency alone. Preserve adequate PCB copper around the through-hole package, maintain airflow where required, and verify the absolute maximum temperature and derating requirements before production use.
Informações de conformidade
The Mouser listing describes the related MC9S08RD60CPE as lead-free. The verified data does not provide enough information to confirm RoHS, REACH, halogen-free, or conflict-mineral status for MC9S08RD60CPE-FR.
