MIMXRT595SFFOC - 200MHz Cortex-M33 with 32MB Flash | NXP
N.º da peça: MIMXRT595SFFOC ✓ AtivoMIMXRT595SFFOC Visão geral
An i.MX RT crossover microcontroller combines the deterministic real-time control characteristics of a microcontroller with the high-level graphics and connected-processing capabilities normally associated with application processors. This positioning makes the MIMXRT595SFFOC suitable for industrial panels, building controls, medical terminals, gateways, and graphical embedded products that require responsive peripherals alongside sophisticated display support.
Key features include a 200 MHz Arm Cortex-M33 processor core, 32 MB of octal flash, hardware encryption, graphics acceleration, and operation from 1.8 V, 2.5 V, or 3.3 V supply levels. NXP positions the device for secure, low-power Internet of Things applications. The on-chip flash also removes the need for a separate external boot-flash device in designs where its capacity and programming characteristics satisfy the application requirements.
The part uses an integrated dual-core architecture combining a Cortex-M33 core with a Cortex-M7 core for higher-performance workloads. Its external memory interfaces allow designs to extend storage or connect additional peripherals, while dedicated graphics acceleration handles display-oriented workloads without placing the full burden on the general-purpose processor. Hardware encryption protects stored code and data against unauthorized access when the associated security features are enabled in the system design.
Typical applications include industrial human-machine interfaces, smart-building control panels, medical-device user interfaces, connected gateways, and low-power IoT controllers. The 249-pin FOWLP package is supplied in a tray configuration. Board design should treat this package as a high-pin-count, fine-pitch assembly and follow the land pattern, escape-routing, and reflow guidance in the NXP data sheet.
The main design consideration is that this MCU integrates substantially more flash and graphics capability than a conventional small Cortex-M33 device, so firmware architecture, external peripheral routing, and package escape routing require early planning. Confirm pin multiplexing, power sequencing, memory timing, and exposed-pad requirements against the current NXP documentation before committing the PCB layout.
This page organizes the verified product characteristics of the MIMXRT595SFFOC together with application guidance, package details, design notes, and comparison parameters. It helps engineers evaluate the processor, memory configuration, security functions, graphics support, and power options before beginning hardware design.
Alternativas drop-in para MIMXRT595SFFOC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasMIMXRT595SFFOC Classificações máximas e características elétricas
| Product Type | i.MX RT crossover microcontroller |
| Processor Core | Arm Cortex-M33 |
| Maximum Processor Frequency | 200 MHz |
| On-Board Flash Memory | 32 MB octal flash |
| Architecture | 32-bit RISC |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Graphics Support | Graphics acceleration |
| Security Features | Hardware encryption |
| Power Features | Low-power operating modes |
| Package Type | 249-pin FOWLP |
| Package Dimensions | 7 x 7 mm |
| Shipping Package | Tray |
| Tipo de montagem | Surface mount |
| Status do ciclo de vida | Active |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 260 C |
| Maximum Time at Peak Reflow Temperature | 40 s |
| Data Sheet Length | 128 pages |
Guia de Configuração de Pinos do MIMXRT595SFFOC tray
Configuração de pinos para MIMXRT595SFFOC (pacote tray). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MIMXRT595SFFOC.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MIMXRT595SFFOC é adequado para 6 aplicaçãos: Industrial Human-Machine Interface, Smart Building Control Panel, Medical Device User Interface, Connected IoT Gateway Controller, Graphical Edge Terminal, Secure Connected Controller.
Industrial Human-Machine Interface
The MIMXRT595SFFOC fits industrial operator panels because it combines a 200 MHz Arm Cortex-M33 core with 32 MB of integrated octal flash and graphics acceleration. Designers can keep control logic, configuration data, and interface assets within one programmable device while using the 249-pin FOWLP footprint for display, touch, communication, and expansion connections. Its low-power modes also help balance responsive screen updates against the energy limits of panel-powered and battery-assisted equipment.
Smart Building Control Panel
A smart-building controller benefits from the MIMXRT595SFFOC's combination of on-board octal flash, hardware encryption, and extensive connectivity. The processor can manage touch input, room controls, networked sensors, status displays, and local data logging within a compact 7 x 7 mm device footprint. Hardware encryption supports protection of credentials and configuration data, while the crossover architecture provides more graphics capability than a conventional control-only Cortex-M33 design.
Medical Device User Interface
The MIMXRT595SFFOC can serve as the user-interface and control processor in a connected medical terminal that combines a graphical display, touch controller, communications, and safety-oriented data handling. Its 32 MB of integrated octal flash provides space for application code and interface assets, and the hardware encryption function adds a device-level protection mechanism. Final medical-device qualification depends on the complete system design and the product's applicable regulatory requirements.
Connected IoT Gateway Controller
The MIMXRT595SFFOC suits connected IoT controllers that must handle protocol conversion, local control, graphical status reporting, and secure firmware storage. The 200 MHz Cortex-M33 core provides deterministic peripheral processing, while integrated flash simplifies firmware deployment and can reduce the component count compared with a design using a separate boot flash. Low-power modes support duty-cycled operation in endpoint devices that spend substantial time idle.
Graphical Edge Terminal
Graphical edge terminals benefit from the MIMXRT595SFFOC's graphics acceleration, 32 MB octal flash, and ability to operate from 1.8 V, 2.5 V, or 3.3 V supply levels. This combination allows a compact module to drive a local display, execute protocol handling, and retain configuration data without relying entirely on an external host. The choice of supply level should follow the interface voltage plan and the power-sequencing requirements in the manufacturer data sheet.
Secure Connected Controller
The MIMXRT595SFFOC is appropriate for connected controllers that need on-board code storage and hardware-based encryption in the same package. The 32 MB octal flash supports firmware images and configuration data, while the security function helps protect assets associated with device identity and stored information. Designers should additionally configure secure boot, debug access, and key handling according to the NXP documentation rather than relying on the presence of encryption alone.
Dados de referência de engenharia para MIMXRT595SFFOC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Product Type | i.MX RT500 crossover microcontroller |
| Brand | NXP Semiconductors |
| Package | 249-pin FOWLP, 7 x 7 mm |
| Processor Core | Arm Cortex-M33 |
| Maximum Frequency | 200 MHz |
| On-Board Flash | 32 MB octal flash |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Graphics Support | Graphics acceleration |
| Security Features | Hardware encryption |
| Shipping Package | Tray |
Principais diferenciais
- Integrated 32 MB octal flash in a crossover MCU (vs MIMXRT595SFAWC)
- Crossover processing with graphics acceleration (vs Conventional basic Cortex-M33 microcontroller)
- Security and low-power integration (vs External boot-flash microcontroller design)
Notas de projeto
Treat the 249-pin FOWLP as a high-density escape-routing problem. Assign power, ground, high-speed interfaces, and programmable I/O to the package pins defined by the NXP pin-description table, and preserve the recommended footprint exactly. Because the board cannot accept a different package without rerouting, confirm land-pattern compatibility against the current package drawing before releasing the PCB files.
Plan the 1.8 V, 2.5 V, or 3.3 V rail architecture around the actual core and peripheral requirements rather than selecting a nominal voltage from the catalog alone. Validate power-up order, rail tolerances, decoupling placement, and load-transient requirements using the electrical-characteristics and power-management sections of the manufacturer data sheet. Route sensitive supplies away from switching-converter nodes wherever the layout permits.
The 249-pin FOWLP offers a small body area but a high connection count, so escape-routing density and internal via structure strongly influence thermal performance. Spread high-current and frequently switching pins across the available thermal and ground structures, then evaluate junction temperature under the worst specified operating condition. Use a via field, copper pours, and exposed-pad connections consistent with the recommended layout in the NXP documentation.
Do not assume that every member of the MIMXRT595 family has the same footprint, flash configuration, or exposed-pad arrangement. In particular, the SFAWC ordering option associated with this family uses a different package and is not interchangeable with the SFFOC footprint. Also avoid relying on a generic cross-reference entry without checking the complete pin, memory, security, graphics, and power-function mapping.
Keep display, memory, and other high-speed interfaces routed with continuous reference planes and avoid splitting return paths beneath the FOWLP escape area. Match external memory and interface timing to the device's published requirements, and keep switching regulators and their high-current loops away from sensitive communication nets. Validate the final stack-up and termination strategy with signal-integrity analysis before fabrication.
Informações de conformidade
The NXP product page lists environmental and quality information, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals states are not stated in the cited product snippets. Verify current declarations on the NXP product page and in the applicable compliance documentation.
