MK30DN512ZVLL10 - Kinetis K30 Cortex-M4 MCU 512KB | NXP
N.º da peça: MK30DN512ZVLL10 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.95 | $8,95 |
| 10 | $8.2 | $82,00 |
| 100 | $7.45 | $745,00 |
| 500 | $6.8 | $3.400,00 |
| 1.000 | $6.2 | $6.200,00 |
MK30DN512ZVLL10 Visão geral
A microcontroller (MCU) is a single-chip computer that combines a processor core, non-volatile memory (flash), SRAM, and peripherals such as timers, serial interfaces, and ADCs. Within the system hierarchy, the MK30DN512ZVLL10 sits at the embedded-control level: ARM Cortex-M4 core, Kinetis K30 series, Kinetis MCU portfolio, NXP semiconductor product line. The Cortex-M4 architecture adds DSP instructions and single-cycle MAC for math-intensive embedded workloads.
Key features include the 512 KB on-chip flash program memory, the integrated segment LCD driver peripheral that distinguishes the K30 from the K20 series, a rich peripheral set of serial interfaces (UART, SPI, I2C), analog-to-digital converters, and a multi-purpose clock generator (MCG) supporting internal and external clocking. Wide 1.71 V to 3.6 V operation supports direct 1.8 V, 2.5 V, and 3.3 V power rails.
The Kinetis K30 series is built on the ARM Cortex-M4 core with a nested vectored interrupt controller (NVIC) and supports NXP's Kinetis software ecosystem, including MCUXpresso SDK and complementary tooling. The scalable Kinetis portfolio allows pin-compatible migration between family members with different flash sizes and peripheral mixes.
Typical applications include segment-LCD human-machine interfaces (utility meters, thermostats, appliance panels), industrial control and monitoring nodes, and consumer embedded systems requiring low-power operation with on-chip display drive. The LCD controller eliminates a separate LCD driver IC, reducing BOM cost.
Design consideration: verify the CPU clock configuration against the K30 family data sheet, and observe the 1.71 V minimum supply voltage during brownout conditions; flash write operations require the specified flash-programming voltage range.
This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer data sheet. Pricing is quote-based; specifications marked accordingly reflect gaps in the retrieved web data.
Alternativas drop-in para MK30DN512ZVLL10 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MK30DN512VLL10
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK20DN512ZVLL10
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK40DN512ZVLL10
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK60DN512ZVLL10
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK60DN512VLL10
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MK30DN512ZVLL10 Classificações máximas e características elétricas
| Core Processor | ARM Cortex-M4 |
| Core Size | 32-bit |
| Family | Kinetis K30 |
| Flash Memory | 512 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Supply Voltage Rails Supported | 1.8 V / 2.5 V / 3.3 V |
| Number of I/O | 102 |
| Encapsulamento | 100-LQFP (14 x 14 mm) |
| Tipo de montagem | Surface Mount |
| Peripherals | Segment LCD controller (SLCD), DMA, PWM, WDT |
| Interfaces | UART, SPI, I2C, I2S |
| Program Memory Type | Flash |
| Life Cycle Stage | Active |
Guia de Configuração de Pinos do MK30DN512ZVLL10 100-lqfp (14 x 14 mm)
Configuração de pinos para MK30DN512ZVLL10 (pacote 100-lqfp (14 x 14 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MK30DN512ZVLL10.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MK30DN512ZVLL10 é adequado para 6 aplicaçãos: Utility Metering (Electricity/Water/Gas Meters), Industrial HMI and Control Panels, Home Appliances and Thermostats, Medical Device User Interfaces, Building Automation and Access Control, Portable Test and Measurement Instruments.
Utility Metering (Electricity/Water/Gas Meters)
The MK30DN512ZVLL10 fits utility metering because its integrated segment LCD controller drives the customary 6-8 digit meter display directly, and its 512 KB flash stores metrology firmware, calibration tables, and communication stacks simultaneously. The 102 GPIOs handle keypad interrogation, tamper switches, and pulse inputs, while UART and SPI interfaces link to metering front-ends and communication modules. The 1.71 V to 3.6 V supply range supports 3.3 V mains-derived or battery-backed rails, and the Cortex-M4 core executes DSP-enhanced metering computations such as RMS accumulation efficiently. Designers should budget the LCD drive current in overall power calculations and verify the segment/common count against the K30 data sheet to match the target LCD glass.
Recomendado
Industrial HMI and Control Panels
For industrial control panels, the MK30DN512ZVLL10 combines a segment LCD human-machine interface with sufficient compute headroom: the Cortex-M4 core with DSP instructions and single-cycle MAC accelerates control-loop math, and 512 KB flash accommodates protocol stacks for Modbus RTU over UART or industrial sensor networks over I2C/SPI. The 102 GPIO lines interface relays, encoders, and limit switches, while DMA offloads serial transfers from the CPU. The industrial temperature-grade operation and wide 1.71 V to 3.6 V supply tolerate noisy 24 V-panel power derived rails. When replacing an existing Kinetis design, the shared VLL LQFP-100 footprint allows migration to MK40/MK60 variants if USB or Ethernet connectivity is later required without PCB respin.
Recomendado
Home Appliances and Thermostats
Consumer appliances and thermostats benefit from the MK30DN512ZVLL10's on-chip segment LCD drive, which replaces an external LCD driver IC and lowers BOM cost in high-volume products. The 512 KB flash supports appliance firmware including UI state machines, font tables, and OTA-style update staging, while ADCs read temperature sensors and potenteometer setpoints. GPIO count of 102 covers touch keys, relays, and motor-control outputs. Wide supply range suits transformerless capacitive-drop supplies clamped to 3.3 V. The Cortex-M4 core easily handles PID temperature loops at low clock rates, and low-power modes stretch battery life in thermostat applications. Verify LCD biasing options and contrast control configuration in the K30 reference manual for the chosen LCD glass.
Recomendado
Medical Device User Interfaces
Benchtop and portable medical devices such as glucose meters, blood-pressure monitors, and infusion pump panels use the MK30DN512ZVLL10's segment LCD controller to render readings without a graphic display controller, keeping EMC-friendly low clock rates and low radiated emissions. The Cortex-M4's DSP capability supports signal-chain post-processing of sensor front-ends, and 512 KB flash stores calibration and audit-log data required in regulated environments. The 1.71 V to 3.6 V operating range interfaces directly with 3.3 V analog front-ends, and 102 GPIOs support isolation-control lines and alarms. Designers must validate the MCU within the complete device under applicable quality management processes; the part itself is a standard industrial-grade component, so confirm required qualification levels for the target medical classification.
Recomendado
Building Automation and Access Control
In building automation nodes - room controllers, access-control readers, and zone displays - the MK30DN512ZVLL10 drives segment LCD status panels while communicating over RS-485 (UART), DALI, or proprietary buses via SPI/I2C peripherals. The 512 KB flash supports multi-protocol stacks and credential tables, and the Cortex-M4 handles DES/AES-style throughput demands with DSP acceleration. 102 GPIOs cover Wiegand reader inputs, relay outputs, and door-contact sensing. The wide 1.71 V to 3.6 V supply range accommodates bus-powered nodes, and DMA channels keep UART reception efficient at high bus loads. For IP-connected nodes, the footprint-compatible MK60DN512ZVLL10 variant adds an Ethernet MAC without PCB redesign, making the K30 an ideal baseline for a scalable product family.
Recomendado
Portable Test and Measurement Instruments
Handheld instruments - multimeters, environmental meters, and portable testers - use the MK30DN512ZVLL10 to combine a segment LCD readout with data logging: 512 KB flash stores measurement records, ADCs sample sensor channels, and the Cortex-M4 performs calibration and unit-conversion math. Battery operation is supported by the 1.71 V minimum supply and Kinetis low-power stop modes; designers should profile actual current in each mode from the K30 data sheet because LCD drive adds static consumption. 102 GPIO lines manage button matrices, buzzer drive, and multiplexed sensor selection. UART/SPI links export data to PCs or printers. The automotive-style robustness of the Kinetis I/O structure tolerates field ESD better than many consumer MCUs, though external TVS protection on external-facing lines remains best practice.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MK30DN512ZVLL10 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MK30DN512VLL10 | MK20DN512ZVLL10 | MK40DN512ZVLL10 | MK60DN512ZVLL10 | MK60DN512VLL10 |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP - same | 100-LQFP - same | 100-LQFP - same | 100-LQFP - same | 100-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4 (32-bit) | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
Principais diferenciais
- Integrated segment LCD controller (vs MK20DN512ZVLL10)
- Same footprint with connectivity upgrade path (vs MK60DN512ZVLL10)
- Lower-cost alternative for non-LCD builds (vs MK40DN512ZVLL10)
Notas de projeto
Design the 3.3 V rail for the MCU's peak run current plus LCD drive current - consult the K30 family data sheet current-consumption tables for the exact figures at your clock frequency, as retrieved web data does not list run/sleep/stop currents. Ensure the regulator holds above 1.71 V under all load transients; brownout below the flash-programming voltage range during write operations can corrupt flash. Add a supervisor/reset IC or rely on the Kinetis internal brown-out detection and verify its thresholds against your supply ramp.
Use the standard Kinetis LQFP-100 decoupling scheme: 100 nF ceramic capacitor at each VDD/VDDA pin pair placed within 2 mm of the pin, plus one bulk 4.7-10 uF per supply domain. Keep VDDA on a quiet analog supply (ferrite or RC filter from VDD) for ADC accuracy. Route the LCD segment/common traces away from switching nets; SLCD drive is charge-sharing based and susceptible to coupling that appears as ghost segments. Follow the NXP Kinetis hardware design application notes for the exact recommended layout.
Pin-multiplexing is the most common migration pitfall within the Kinetis K-series: although MK20/MK30/MK40/MK60 in VLL LQFP-100 share the footprint, the signal availability per pin differs by family. Before swapping to an alternative, re-verify every pin's multiplexed function in the reference manual and confirm the SLCD segment count of the replacement meets your LCD glass. Also confirm the exact silicon revision denoted by the 'Z' suffix matches your software assumptions; NXP device revision notes document errata differences between revisions.
Informações de conformidade
Retrieved web data does not include RoHS/REACH status for this MPN. Verify on the official NXP product page for MK30DN512ZVLL10.