MKL14Z64VFM4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors
N.º da peça: MKL14Z64VFM4 ✓ AtivoMKL14Z64VFM4 Visão geral
An ultra-low-power microcontroller is a semiconductor designed to balance processing capability with minimized energy consumption. The Kinetis KL14 family extends the Kinetis KL1 low-power portfolio with additional memory, communications, and analog peripheral options. Within the product hierarchy, the MKL14Z64VFM4 is a microcontroller, embedded processor, and power-management-aware system-on-chip suitable for portable IoT, sensing, and connected embedded systems.
Three headline characteristics define this device: a 48 MHz Cortex-M0+ processor, 64 KB of embedded Flash storage, and a compact 32-HVQFN package. Its operating-temperature range extends from -40 °C to 105 °C, making it suitable for industrial and embedded environments with broad temperature requirements. The 5 mm by 5 mm QFN format also supports compact board layouts while exposing the package’s pins and thermal pad according to the manufacturer’s land-pattern guidance.
The KL14 architecture combines a real-time Cortex-M0+ core with low-power operating modes and integrated peripherals for connected embedded designs. Its 8 KB SRAM provides working memory for protocol stacks, sensor processing, and control routines, while the 64 KB Flash region supports resident firmware and configuration data. USB support expands the device’s usefulness for portable data acquisition, configuration interfaces, and peripheral connectivity without requiring a separate USB controller.
Typical applications include portable IoT sensors, low-power data loggers, industrial sensing nodes, USB-connected measurement equipment, compact motor or actuator controllers, and wearable accessories. In these systems, the microcontroller can manage sensor acquisition, local filtering, communications, and low-power duty cycling while retaining enough memory for embedded firmware. The 48 MHz clock also allows the core to service time-sensitive control and communication tasks efficiently.
When designing a board around the MKL14Z64VFM4, follow the manufacturer’s 32-HVQFN land pattern, exposed-pad, and soldering requirements exactly. Place decoupling capacitors close to the supply pins, keep sensitive signal routes away from fast-switching nodes, and program unused pins according to the device guidelines. Confirm clock, USB, communication, and low-power behavior against the manufacturer datasheet for the selected board configuration.
This product page combines the exact device identity, core and memory configuration, package data, lifecycle information, qualified same-family alternatives, and engineering-focused selection guidance. It also organizes PCB, power, and design considerations around the MKL14Z64VFM4 so engineers can evaluate the MCU before beginning a connected, low-power embedded design.
Alternativas drop-in para MKL14Z64VFM4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
MKL14Z64VFM4
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MKL14Z128VFM4
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MKL14Z32VFM4
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MKL14Z16VFM4
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MKL14Z64VFM4 Classificações máximas e características elétricas
| Product Type | 32-bit microcontroller |
| Core Processor | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| Architecture | 32-bit RISC |
| Series | Kinetis KL14 |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Faixa de temperatura de operação | -40 °C to 105 °C |
| Encapsulamento | 32-HVQFN, 5 mm x 5 mm |
| Contagem de pinos | 32 pins |
| Tipo de montagem | Surface mount |
| USB Support | Yes |
| Power Class | Ultra-low-power microcontroller |
Guia de Configuração de Pinos do MKL14Z64VFM4 32-hvqfn, 5 mm x 5 mm
Configuração de pinos para MKL14Z64VFM4 (pacote 32-hvqfn, 5 mm x 5 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MKL14Z64VFM4.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MKL14Z64VFM4 é adequado para 6 aplicaçãos: Portable IoT Sensor Nodes, USB-Connected Data Loggers, Industrial Sensing and Monitoring, Wearable and Personal Devices, Compact Motor and Actuator Control, Network Interface and Protocol Bridging.
Portable IoT Sensor Nodes
The MKL14Z64VFM4 fits portable IoT sensor nodes that need local acquisition, event handling, and low-power operation within a compact footprint. Its 48 MHz Arm Cortex-M0+ core provides enough performance for filtering, sensor fusion, and communications state machines, while 64 KB of Flash stores resident application code and 8 KB of SRAM supports working buffers. The ultra-low-power Kinetis KL14 positioning is appropriate for duty-cycled battery systems where wake-up frequency and peripheral activity dominate battery life. The 32-HVQFN package also leaves board area for a radio, sensor, and power-management circuitry.
Recomendado
USB-Connected Data Loggers
The MKL14Z64VFM4 is suitable for USB-connected data loggers because it combines USB support with 64 KB of Flash, 8 KB of SRAM, and a 48 MHz Cortex-M0+ core. Firmware can acquire sensor data, maintain time stamps, buffer recent events, and expose the results through a USB interface without a separate USB controller. The 1.8 V, 2.5 V, and 3.3 V supply options support integration across portable and industrial systems. Designers should budget USB routing, ESD protection, connector mechanics, and power-budget headroom while retaining the compact 5 mm by 5 mm footprint.
Recomendado
Industrial Sensing and Monitoring
The MKL14Z64VFM4 supports industrial sensing and monitoring designs that require a broad -40 °C to 105 °C operating range and a compact embedded controller. The 48 MHz Cortex-M0+ core can manage periodic sensor sampling, threshold checks, local diagnostics, and communications, while 8 KB of SRAM supports real-time data processing and 64 KB of Flash accommodates configuration and application firmware. Its low-power architecture suits unattended equipment that spends substantial time between measurement events. Production designs should still verify the exact operating mode, clock accuracy, analog interface, and environmental qualification requirements.
Recomendado
Wearable and Personal Devices
The MKL14Z64VFM4 can serve as the control MCU in compact wearable or personal-device accessories where processing capability, memory, and board area must coexist. Its 48 MHz Cortex-M0+ core handles user-input handling, sensor fusion, haptic control, and low-rate communications, while the ultra-low-power family positioning supports duty-cycled operation. The 32-HVQFN package measures 5 mm by 5 mm, allowing placement near a sensor or power-management section without dominating PCB area. Firmware must explicitly configure unused pins and low-power transitions, and battery-current measurements should include wireless and sensor activity.
Recomendado
Compact Motor and Actuator Control
The MKL14Z64VFM4 is appropriate for compact motor and actuator controllers where a fast 32-bit core, local program memory, and multiple peripherals are valuable. The 48 MHz Cortex-M0+ processor can execute position or speed-control algorithms, coordinate sensor inputs, and manage protection sequences while the 8 KB SRAM holds control variables. The 5 mm by 5 mm HVQFN package permits placement close to power devices and drivers, reducing control-loop routing requirements. Timing accuracy, PWM resources, fault handling, thermal performance, and the permitted ambient range must be checked against the motor system before production release.
Recomendado
Network Interface and Protocol Bridging
The MKL14Z64VFM4 can implement a small protocol-conversion or network-interface function when the design requires a Cortex-M0+ core, USB connectivity, and moderate embedded memory. The 48 MHz core supports serial framing, state management, and packet processing, while 64 KB of Flash provides room for stack configuration and application logic. Its low-power architecture is useful for interfaces expected to remain idle between control-system updates. Validation must include buffering depth, timeout behavior, USB enumeration, clock tolerance, and whether the selected KL14 peripheral set covers every external bus and interrupt requirement.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MKL14Z64VFM4 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MKL14Z64VFM4 | MKL14Z128VFM4 | MKL14Z32VFM4 | MKL14Z16VFM4 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) |
| Core Processor | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 32 KB | 16 KB |
| Power Class | Ultra-low power | Ultra-low power | Ultra-low power | Ultra-low power | Ultra-low power |
Principais diferenciais
- Balanced embedded memory configuration (vs MKL14Z32VFM4)
- More firmware capacity without a package change (vs MKL14Z16VFM4)
- Exact 64 KB configuration avoids a memory-capacity redesign (vs MKL14Z128VFM4)
- USB-enabled low-power integration (vs MKL14Z32VFM4)
Notas de projeto
Use the manufacturer’s 32-HVQFN land pattern and exposed-pad geometry rather than a generic 32-QFN footprint. Place the device-side decoupling capacitors close to their corresponding supply and ground pins, provide a continuous ground path beneath the exposed pad, and follow the package drawing for the thermal-via pattern. The exposed pad is electrically and thermally significant, so trace connectivity and solder-joint inspection should be included in the board assembly plan.
Define the supply rail and low-power strategy before finalizing the PCB. Although the MKL14Z64VFM4 supports 1.8 V, 2.5 V, and 3.3 V configurations, the usable external clock, USB operation, and peripheral performance can depend on the selected voltage configuration. Use the manufacturer’s recommended decoupling network, confirm regulator startup behavior, and measure current in each relevant operating mode. Battery-powered designs should calculate average consumption from measured sleep, active, and USB-attached states.
Keep USB traces short, continuous, and away from noisy switching nodes while preserving the manufacturer-referenced impedance and routing geometry. Isolate clock-sensitive routes from inductors, motor drivers, and high-current power paths. Provide a clean, low-impedance ground reference for USB and analog measurements, and keep test points accessible without forcing long probe leads onto sensitive nets. Review unused-pin configuration and exposed-pad connections against the datasheet before releasing the layout.
Do not infer pin compatibility from the family name alone. Although the listed MKL14 alternatives use the same package format, Flash capacity and SRAM can differ, and ordering suffixes can indicate different shipping formats. Validate the exact MPN, pin table, exposed pad, power requirements, peripherals, and memory map before substitution. Firmware should also be tested across cold start, reset, brownout, USB connect, and low-power wake conditions.
Informações de conformidade
The NXP product page identifies MKL14Z64VFM4 as active, but the product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm compliance and qualification records for the exact ordering code before production release.