MKV10Z16VFM7 - 75MHz Cortex-M0+ 16KB MCU | NXP
N.º da peça: MKV10Z16VFM7 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MKV10Z16VFM7 Visão geral
An MCU is a programmable integrated circuit containing a processor core, memory, peripherals, and communication interfaces. The Kinetis KV10 family is positioned as the entry point to the Kinetis V series, combining real-time control capability with Arm Cortex-M0+ software support. The processor uses a 32-bit Arm Cortex-M0+ core and is intended for deterministic control loops rather than high-end application processing.
The verified product data identifies a 75 MHz operating frequency, 16 KB Flash, and 8 KB SRAM in one distributor result, while the NXP and DigiKey descriptions identify the device as a 32-bit Kinetis KV microcontroller. The family description also states that the Cortex-M0+ core provides hardware square-root and divide capability, supporting math-intensive motor-control workloads. Operating voltage information is listed as 2.5 V and 3.3 V in the verified search data.
This MCU is suitable for small BLDC or PMSM motor-control systems, embedded industrial controls, appliances, and compact consumer equipment. Its 32-QFN package helps reduce board area compared with larger leaded packages, while the 75 MHz core provides more instruction throughput than lower-frequency entry-level MCUs. The exact pin names, exposed-pad connection, memory-map details, peripherals, and timing ratings require confirmation from the manufacturer datasheet before a new PCB is released.
Designers should preserve the manufacturer’s recommended power, decoupling, exposed-pad, and signal-layout requirements. Because the verified data does not provide a public pin table in the supplied results, the pinout field is left unavailable rather than reconstructed from memory. Firmware compatibility should also be confirmed because changes in peripherals or package mapping can affect a drop-in replacement decision.
This product summary consolidates the verified distributor identity, NXP family positioning, packaging information, and application context. It also distinguishes confirmed facts from parameters that still require datasheet review, helping engineers make an initial motor-control MCU selection without implying unsupported electrical or pin-level specifications.
Alternativas drop-in para MKV10Z16VFM7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MKV10Z16VFM7 (mesmo formato e footprint) — diferindo em Core Architecture, Package.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MKV10Z16VFM7
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →MKV10Z16VFM7 Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M0+ real-time microcontroller |
| Core | ARM Cortex-M0+ |
| Frequência máxima de clock | 75 MHz |
| Flash Memory | 16 KB |
| SRAM | 8 KB |
| Operating Voltage | 2.5 V / 3.3 V |
| Encapsulamento | 32-QFN (5 x 5 mm) |
| Package Pin Count | 32 pins |
| Core Architecture | 32-bit RISC |
| Family | Kinetis KV10 |
| Application Focus | Real-time motor control |
| Motor Control Support | BLDC and PMSM target applications |
| Arithmetic Feature | Hardware square root and divide capability |
| Performance Context | 27% increase versus comparable MCUs in math-intensive applications, according to NXP |
| Tipo de montagem | Surface Mount |
| Manufacturer | NXP Semiconductors |
| Status do ciclo de vida | Active |
Guia de Configuração de Pinos do MKV10Z16VFM7 32 pins
Configuração de pinos para MKV10Z16VFM7 (pacote 32 pins). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MKV10Z16VFM7.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MKV10Z16VFM7 é adequado para 6 aplicaçãos: BLDC Motor Control, PMSM Motor Control, Small Appliance Control, Industrial Sensor Interface, Embedded Power Conversion Control, Compact Consumer Equipment.
BLDC Motor Control
The MKV10Z16VFM7 fits compact brushless DC motor controllers where a deterministic real-time loop and Arm Cortex-M0+ processing are needed at up to 75 MHz. NXP specifically identifies BLDC motors as a KV10 target. The 16 KB Flash and 8 KB SRAM provide a compact control platform, but the design must confirm PWM channels, timer synchronization, ADC inputs, fault handling, and pin multiplexing in the datasheet.
Recomendado
PMSM Motor Control
The MKV10Z16VFM7 is a candidate for permanent magnet synchronous motor control because NXP describes the KV10 family as targeting computationally demanding PMSM applications. The Cortex-M0+ core operates up to 75 MHz and includes hardware square-root and divide capability for math-intensive control calculations. Final suitability depends on current sampling, position sensing, PWM resolution, protection features, and the exact peripheral map.
Recomendado
Small Appliance Control
The 75 MHz Cortex-M0+ performance and compact 32-QFN package make the MKV10Z16VFM7 suitable for small appliance controllers that require real-time state-machine execution without a high-end processor. Its 16 KB Flash and 8 KB SRAM favor compact firmware rather than large user interfaces or connectivity stacks. Designers should verify whether the required motor, sensor, communications, and safety I/O fit the device.
Recomendado
Industrial Sensor Interface
The MKV10Z16VFM7 can serve as a compact controller for industrial sensor modules that require deterministic sampling and local control. Its 32-bit Cortex-M0+ core at up to 75 MHz provides more processing headroom than very low-end microcontrollers, while 16 KB Flash and 8 KB SRAM support focused embedded firmware. Industrial use requires checking supply limits, temperature range, isolation, ESD, and any required certification.
Recomendado
Embedded Power Conversion Control
The MKV10Z16VFM7 is suitable for supervisory control in compact power-conversion systems when the control algorithm fits 16 KB Flash and 8 KB SRAM. The 75 MHz Arm core can execute control tasks quickly, but the exact analog resources and PWM behavior must be matched to the converter topology. Use the datasheet to verify ADC resolution, timer output, fault inputs, operating voltage, and thermal limits.
Recomendado
Compact Consumer Equipment
The MKV10Z16VFM7 can support compact consumer equipment with embedded control functions, particularly when board area and power consumption matter. Its 32-QFN 5 x 5 mm package supports dense layouts, and the 75 MHz Cortex-M0+ core handles real-time control tasks efficiently. The part should not be selected for large graphical interfaces or heavy connectivity unless the peripheral and memory requirements are verified.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MKV10Z16VFM7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MKV10Z16VFM7 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Frequency | 75 MHz | 75 MHz |
| Flash Memory | 16 KB | 16 KB |
| SRAM | 8 KB | 8 KB |
| Operating Voltage | 2.5 V / 3.3 V | 2.5 V / 3.3 V |
| Motor-Control Positioning | BLDC and PMSM target applications | BLDC and PMSM target applications |
| Lifecycle Status | Active | Active |
Principais diferenciais
- Dedicated Kinetis KV10 real-time-control positioning (vs MKV10Z16VFM7)
- 75 MHz Arm Cortex-M0+ processing (vs MKV10Z16VFM7)
- Compact 32-QFN implementation (vs MKV10Z16VFM7)
Notas de projeto
Use the manufacturer’s QFN land pattern and exposed-pad assembly recommendations rather than deriving the footprint from a distributor abbreviation. Confirm pin 1 orientation, pad geometry, solder mask, paste stencil, and the exposed-pad connection in the official package drawing. A 5 x 5 mm QFN is compact, and layout errors can affect soldering, thermal performance, and high-current return paths.
Design the supply rails and decoupling around the exact operating conditions in the datasheet. The verified search data labels the device as 2.5 V / 3.3 V, but it does not provide current limits, voltage tolerances, or power-consumption figures. Place required bulk and bypass capacitors close to the appropriate supply pins and verify startup, brownout, and motor-transient behavior on the final board.
Do not treat a generic Kinetis or Cortex-M0+ match as a drop-in replacement. The 75 MHz frequency, 16 KB Flash, 8 KB SRAM, 32-QFN package, motor-control peripherals, pin mux, exposed pad, voltage requirements, and package markings must all match the design intent. The supplied cross-reference results did not identify a verified alternate MPN, so procurement or redesign should wait for manufacturer-level confirmation.
Informações de conformidade
The verified search data does not explicitly state compliance status for MKV10Z16VFM7. Consult the current NXP product documentation and applicable manufacturer declarations before release.
