MPC8377EVRAJF - PowerQUICC II Pro MPU 533MHz e300c4s | NXP
N.º da peça: MPC8377EVRAJF ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $59.8 | $59,80 |
| 10 | $53.2 | $532,00 |
| 100 | $47.1 | $4.710,00 |
| 250 | $42.85 | $10.712,50 |
| 500 | $38.6 | $19.300,00 |
MPC8377EVRAJF Visão geral
A PowerQUICC II Pro processor is a system-on-chip (SoC) built around a PowerPC core that integrates peripheral controllers, security engines, and networking accelerators into one package. In the broader taxonomy, the MPC8377E sits within the PowerQUICC family -> PowerPC MPU -> embedded microprocessor -> integrated circuit -> semiconductor. This integration reduces BOM cost and PCB area versus a discrete CPU-plus-controller design, while the built-in encryption engine accelerates IPsec, SSL/TLS, and other crypto workloads at line rate.
Key features highlighted in the NXP datasheet include a 32-bit e300c4s core with MMU and double-precision FPU, integrated security engine (SEC 4.0), a QUICC Engine communications subsystem, DDR2 memory controller, PCI Express interface, dual Gigabit Ethernet MACs, and versatile I/O voltage support at 1.8V, 2.5V, and 3.3V. The 533 MHz core frequency balances throughput and power for fanless embedded designs.
Architecturally, the MPC8377EVRAJF combines a superscalar PowerPC core, a high-bandwidth on-chip bus fabric, and the QUICC Engine for protocol acceleration. The security engine handles symmetric (AES, 3DES) and asymmetric (RSA, ECC) algorithms in hardware, offloading the core and enabling sustained encrypted throughput at gigabit line rates.
Typical applications include SOHO routers, network-attached storage (NAS), secure VPN gateways, WiMAX/LTE customer-premises equipment, and industrial automation controllers. The wide I/O voltage flexibility also supports legacy 3.3V peripherals alongside modern 1.8V DDR2 memory.
When designing with this part, ensure the 689-TEPBGA land pattern and 31x31 mm PCB footprint are respected, provide adequate decoupling, and follow NXP's hardware-design checklist for DDR2 fly-by topology and QUICC Engine reference clocking. Thermal management at 533 MHz depends on the board's copper area and airflow.
This page synthesizes distributor pricing, drop-in same-package alternatives within the PowerQUICC II Pro family, and practical design notes not aggregated in the manufacturer datasheet alone.
Alternativas drop-in para MPC8377EVRAJF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MPC8377EVRAJF (mesmo formato e footprint) — diferindo em Memory Controller, RoHS Status, Security Engine.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MPC8377ECVRALG
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MPC8378ECVRAJFA
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MPC8314EVRAGDA
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MPC8377EVRAJFA
✅ Drop-In✓ Em estoque
$77.4 / unidade
Ver ficha técnica →MPC8377EVRAJF Classificações máximas e características elétricas
| Manufacturer | NXP Semiconductors |
| Series | PowerQUICC II Pro |
| Core Processor | PowerPC e300c4s |
| Number of Cores / Bus Width | 1 Core / 32-Bit |
| Core Speed | 533 MHz |
| Encapsulamento / Caixa | 689-TEPBGA II (31x31 mm) |
| Tipo de montagem | Surface Mount |
| Memory Controller | DDR2 SDRAM |
| Security Engine | Integrated SEC 4.0 (AES, 3DES, RSA, ECC) |
| Communications Subsystem | QUICC Engine |
| Ethernet | Dual Gigabit Ethernet MAC |
| PCI Express | Yes (integrated) |
| I/O Voltage | 1.8 V / 2.5 V / 3.3 V |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do MPC8377EVRAJF 689-tepbga ii (31x31 mm)
Configuração de pinos para MPC8377EVRAJF (pacote 689-tepbga ii (31x31 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MPC8377EVRAJF.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MPC8377EVRAJF é adequado para 6 aplicaçãos: SOHO / Branch-Office Routers, Secure VPN Gateway / SSL Appliance, WiMAX / LTE Customer-Premises Equipment, Network-Attached Storage (NAS) Controllers, Industrial Automation / Machine Controllers, Printers and Multi-Function Peripherals.
SOHO / Branch-Office Routers
The MPC8377EVRAJF is a strong fit for small-office and branch-office routers because its PowerPC e300c4s core at 533 MHz and integrated QUICC Engine handle PPPoE, VLAN tagging, NAT, and IPsec at line rate. Its dual Gigabit Ethernet MACs eliminate the need for an external switch, and the integrated SEC 4.0 crypto engine accelerates IPsec and SSL/TLS without loading the core. The 689-TEPBGA II package fits standard router mainboards, while the versatile 1.8V/2.5V/3.3V I/O supports legacy PHYs and modern DDR2 memory in a single design.
Recomendado
Secure VPN Gateway / SSL Appliance
For VPN gateways and SSL appliances, the MPC8377EVRAJF provides hardware-accelerated AES, 3DES, RSA, and ECC through SEC 4.0, sustaining encrypted throughput at gigabit rates. The e300c4s core at 533 MHz runs management and routing stacks while the QUICC Engine handles packet classification. The 689-TEPBGA II footprint supports a 31x31 mm mainboard with room for multiple crypto accelerators if needed. Versatile I/O voltages simplify integration with mixed-voltage PHY and SFP subsystems typical in enterprise gateways.
Recomendado
WiMAX / LTE Customer-Premises Equipment
WiMAX and LTE CPE designs benefit from the MPC8377EVRAJF's QUICC Engine for protocol offload, dual Gigabit Ethernet for LAN and WAN, and PCI Express for connecting modern radio modules. The 533 MHz core is sufficient for management-plane tasks while hardware engines carry the data-plane load. The 689-TEPBGA II package enables compact outdoor CPE enclosures with thermal management via the exposed-die top. RoHS compliance and long-life NXP support suit carrier-grade deployments.
Recomendado
Network-Attached Storage (NAS) Controllers
The MPC8377EVRAJF suits mid-range NAS controllers where its PCI Express lanes connect to SATA or SAS controllers and the dual Gigabit Ethernet MACs enable link-aggregation or LAN failover. The DDR2 controller supports the memory bandwidth needed for file-system caching, while the e300c4s core runs Linux-based NAS firmware. The 689-TEPBGA II 31x31 mm package fits standard mini-ITX-style NAS mainboards and supports fanless operation in quiet home/SOHO deployments.
Recomendado
Industrial Automation / Machine Controllers
For industrial machine controllers, the MPC8377EVRAJF delivers deterministic compute on the e300c4s core at 533 MHz with versatile 1.8V/2.5V/3.3V I/O for legacy and modern industrial peripherals. The PCI Express and dual Gigabit Ethernet interfaces enable high-speed fieldbus or industrial-Ethernet connectivity, while the QUICC Engine accelerates time-critical protocol offload. The 689-TEPBGA II package is suitable for ruggedized mainboards with conformal coating and extended-temperature screening when sourced through industrial-grade NXP part numbers.
Recomendado
Printers and Multi-Function Peripherals
High-end network printers and MFPs leverage the MPC8377EVRAJF for page rendering, scanner pipeline management, and network protocol termination. The QUICC Engine accelerates concurrent print and scan traffic, while the e300c4s core at 533 MHz handles image processing. The dual Gigabit Ethernet supports direct-attach printing and scan-to-network workflows. The 689-TEPBGA II package fits the controller board of floor-standing MFPs with adequate thermal margin and supports DDR2 for large image buffers.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MPC8377EVRAJF — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MPC8377ECVRALG | MPC8378ECVRAJFA | MPC8314EVRAGDA | MPC8377EVRAJFA |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 689-TEPBGA II (31x31 mm) | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II - same family | 689-TEPBGA II (31x31 mm) - same |
| Core Processor | PowerPC e300c4s, 32-bit | PowerPC e300c4s, 32-bit | PowerPC e300c4s, 32-bit | PowerPC e300c4, 32-bit | PowerPC e300c4s, 32-bit |
| Security Engine | SEC 4.0 (AES, 3DES, RSA, ECC) | SEC 4.0 (similar) | SEC 4.0+ | Reduced / no crypto engine | SEC 4.0 |
| QUICC Engine | Yes | Yes | Yes | Yes (subset) | Yes |
| Ethernet | Dual Gigabit Ethernet | Dual Gigabit Ethernet | Dual Gigabit Ethernet | Gigabit Ethernet (reduced) | Dual Gigabit Ethernet |
| PCI Express | Yes | Yes | Yes | Yes (reduced lanes) | Yes |
Principais diferenciais
- Integrated SEC 4.0 hardware crypto engine (vs MPC8314EVRAGDA)
- Dual Gigabit Ethernet with QUICC Engine (vs MPC8378ECVRAJFA)
- Versatile 1.8V/2.5V/3.3V I/O support (vs MPC8377EVRAJFA)
Notas de projeto
Estimated: the 689-TEPBGA II 31x31 mm package relies on the exposed-die top surface and PCB inner copper for heat removal. At 533 MHz core speed, follow NXP's thermal-design checklist: provide at least four thermal vias under the die-expose pad and consider a thermal interface material to a chassis heatsink for fanless enclosures. Verify junction temperature with on-die thermal sensors under worst-case ambient.
Route DDR2 memory as a fly-by topology per NXP's MPC8377E hardware-design guide. Place decoupling capacitors as close to each power pin as possible, separate analog and digital grounds with a single stitching point, and maintain 100-ohm differential impedance for the QUICC Engine and Gigabit Ethernet SERDES lanes. Keep the 25/33 MHz reference-clock traces short and guarded.
The MPC8377EVRAJF supports 1.8V, 2.5V, and 3.3V I/O rails. Use a sequenced power architecture so the core rail ramps before the I/O rails to avoid latch-up. Per the NXP datasheet, hold the PORESET pin low until all rails are stable. Verify inrush on bulk capacitors for hot-plug-tolerant designs.
Common pitfalls include confusing the MPC8377EVRAJF with the MPC8377ECVRALG or MPC8378ECVRAJFA - the suffixes denote different speed/security grades. Always confirm the security-engine revision against your firmware/driver support. Do not assume a generic BGA breakout will work: the 689-ball TEPBGA II pin map is unique and must be matched exactly.
Informações de conformidade
RoHS and REACH compliance per NXP product page. Not AEC-Q100 qualified - this is an industrial/embedded networking MPU. Lead-free reflow assembly supported. For halogen-free status, contact NXP franchised distributor.
