Texas Instruments

MSP430F2012TPW - 16MHz Mixed-Signal MCU | Texas Instruments

N.º da peça: MSP430F2012TPW ✓ Ativo
2.2 V to 3.3 V Vdss 14-pin TSSOP Package 16 MHz Speed 2 KB Memory
MOQ: 1 |

MSP430F2012TPW Visão geral

The Texas Instruments MSP430F2012TPW is a 16 MHz mixed-signal microcontroller with 2 KB of Flash memory, 128 bytes of SRAM, a 10-bit SAR ADC, and a Universal Serial Interface supporting I2C or SPI. It is packaged in a 14-pin TSSOP and operates from a 2.2 V to 3.3 V supply.

A mixed-signal microcontroller combines a digital processor with analog measurement functions on one integrated circuit. The MSP430F2012 belongs to the MSP430F2xx family of ultra-low-power 16-bit RISC devices. Its compact memory configuration is intended for cost-sensitive embedded products that require deterministic control, serial communication, and limited analog measurement rather than intensive general-purpose processing.

The MSP430F2012TPW combines a 16-bit CPU operating at 16 MHz with 2 KB Flash and 128 bytes of SRAM. Its 10-bit successive-approximation ADC provides an economical way to measure analog inputs, while the Universal Serial Interface can operate as either I2C or SPI. The device also includes a 16-bit timer, ten I/O pins, and a brownout detector according to the Texas Instruments product description.

The 14-pin TSSOP provides a compact surface-mount footprint, while the MSP430 CPU architecture uses 16-bit registers and constant generators to improve code efficiency. The small SRAM size makes interrupt service routines and communication buffers important design constraints. Firmware should therefore minimize deep call nesting, avoid unnecessary data-copy operations, and keep frequently used variables within the available 128-byte workspace.

Typical applications include low-cost sensor nodes, compact industrial controls, battery-powered instruments, simple motor controllers, and embedded communication modules. The ADC suits products that monitor a sensor or control signal, while I2C or SPI connectivity allows the MCU to work with external sensors, memory, display controllers, or radio modules without requiring a parallel peripheral bus.

Power budgeting and firmware sleep behavior are central to an MSP430 design. Select external input and output capacitors according to the manufacturer’s recommended application circuit, and place them close to the relevant supply pins. When the device spends substantial time between measurements, use the low-power operating modes and disable unused peripherals to reduce current draw and extend battery life.

This product guide combines the manufacturer’s core device characteristics with application guidance, package details, selection criteria, and engineering considerations for embedded-product designers. It helps distinguish the MSP430F2012TPW from temperature-grade and functionally related MSP430 variants while keeping PCB reuse and firmware migration requirements in view.

Alternativas drop-in para MSP430F2012TPW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MSP430F2012TPW (mesmo formato e footprint) — diferindo em CPU Architecture, ADC Resolution, Package, Operating Temperature Range, Serial Interface.

Texas Instruments
ADC Resolution: 10 bits
Package: 14-pin TSSOP (PW)
Operating Temperature Range: -40°C to 85°C
Comparar com MSP430F2012TPW →
Texas Instruments
CPU Architecture: MSP430 CPU16 16-bit RISC
Serial Interface: USI supporting SPI and I2C
Comparar com MSP430F2012TPW →
Texas Instruments
CPU Architecture: MSP430 CPU16, 16-bit RISC
ADC Resolution: 16 bit
Package: 14-pin TSSOP (PW)
Comparar com MSP430F2012TPW →

MSP430F2012IPW

✅ Drop-In
Texas Instruments
📦 14-TSSOP
16-bit RISC · 16 MHz · 125 ns · 2 KB · 128 bytes · 10 bits · I2C and SPI · Yes

Consulte o preço

Ver ficha técnica →

MSP430F2013TPW

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 14-TSSOP
MSP430 CPU16, 16-bit RISC · 16 MHz · 2 KB · 128 B · 16 bit · 1 sigma-delta ADC · USI supporting SPI and I2C · 2.5 V or 3.3 V

Consulte o preço

Ver ficha técnica →

MSP430F2013IPW

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 14-TSSOP
MSP430 CPU16 16-bit RISC · 16 MHz · 2 KB · 128 bytes · 16-bit sigma-delta ADC · 1 · USI supporting SPI and I2C · 1

Consulte o preço

Ver ficha técnica →

MSP430F2011TPW

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 14-TSSOP
16-bit RISC · Ultra-low-power mixed-signal microcontroller · 16 MHz · 125 ns · 2 KB · 2K x 8 · 128 bytes · 256 bytes

Consulte o preço

Ver ficha técnica →

MSP430F2011IPW

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 14-TSSOP
16-bit ultra-low-power mixed-signal microcontroller · MSP430 16-bit RISC · 16 MHz · 2 KB · 128 B · 10 pins · 1 built-in 16-bit timer · 1 integrated analog comparator

Consulte o preço

Ver ficha técnica →

MSP430F2012TPW Classificações máximas e características elétricas

Product Type 16-bit mixed-signal microcontroller
Frequência máxima de clock 16 MHz
Flash Memory 2 KB
SRAM 128 bytes
ADC Resolution 10-bit
ADC Architecture Successive-approximation register (SAR)
Supply Voltage Range 2.2 V to 3.3 V
CPU Architecture 16-bit RISC
Timer 16-bit
Serial Interface USI supporting I2C and SPI
General-Purpose I/O Pins 10 pins
Encapsulamento 14-pin TSSOP
Package Width 4.40 mm
Faixa de temperatura de operação -40°C to +105°C
Brownout Detector Yes
Programming Interface Serial onboard programming without external programming voltage
Programmable Code Protection Yes

Guia de Configuração de Pinos do MSP430F2012TPW 4.40 mm

Configuração de pinos para MSP430F2012TPW (pacote 4.40 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 4.40 mm para MSP430F2012TPW

Nenhum dado detalhado de pinagem disponível para MSP430F2012TPW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MSP430F2012TPW é adequado para 6 aplicaçãos: Battery-Powered Sensor Node, Industrial Sensor Interface, Compact Data Acquisition Module, Simple Motor Control Subsystem, Low-Cost Communications Controller, Portable Measurement Instrument.

🔋

Battery-Powered Sensor Node

The MSP430F2012TPW fits a compact battery-powered sensor node because its MSP430 CPU enters low-power operating modes between measurements while retaining a 10-bit SAR ADC for analog sensing. The 16 MHz clock allows deterministic sampling and control without a higher-power processor. Its 2 KB Flash accommodates a small acquisition routine, while 128 bytes of SRAM requires careful stack and buffer management. The I2C or SPI USI can connect an external sensor or radio module. Designers should prioritize shutdown of unused peripherals, short interrupt routines, and periodic wake-up operation to maximize battery life.

🏭

Industrial Sensor Interface

The MSP430F2012TPW is appropriate for an industrial sensor interface that must measure a 0-to-3.3 V analog signal and process it locally. Its 10-bit SAR ADC supplies 1,024 quantization levels, while the 16 MHz RISC core supports timely filtering, threshold evaluation, and digital status reporting. The USI provides a choice of I2C or SPI for connecting transducers, memory, or a host processor. For industrial equipment, specify the extended -40°C to +105°C TPW temperature grade and isolate the analog input path from switching nodes and high-current traces.

📟

Compact Data Acquisition Module

The MSP430F2012TPW can serve as the controller for a compact data-acquisition module that converts one or more analog inputs into serialized measurements. Its 10-bit SAR ADC handles the conversion, the 16 MHz CPU performs scaling and simple filtering, and the USI transfers results through I2C or SPI. The 14-pin TSSOP keeps the module physically small, although 128 bytes of SRAM requires bounded sample buffering. Engineers should sample at a rate that the ADC and firmware can sustain, use a stable external reference where accuracy depends on it, and avoid blocking serial transfers during acquisition.

⚙️

Simple Motor Control Subsystem

The MSP430F2012TPW can coordinate a small motor-control subsystem that depends on timed inputs, current sensing, and a compact serial command interface. Its 16-bit timer supports deterministic scheduling, while the 10-bit ADC can monitor a scaled feedback signal. The USI allows an external driver or controller to communicate through I2C or SPI. Because the MCU is not a dedicated motor-driver IC, the design must include suitable power transistors, gate-drive circuitry, current limiting, and protection. Firmware should use interrupt-driven timing and leave adequate headroom in the 128-byte SRAM.

🌐

Low-Cost Communications Controller

The MSP430F2012TPW is useful as a low-cost protocol controller for a small I2C or SPI peripheral network. The Universal Serial Interface shares hardware between the two protocols, while the 16-bit CPU handles command parsing, status reporting, and periodic housekeeping. Its 2 KB Flash and 128-byte SRAM are adequate for short packet formats but not large protocol stacks or buffering. Keep receive buffers bounded, avoid unbounded loops, and use the timer or interrupt system for timing-sensitive operations. The same 14-pin TSSOP footprint simplifies transitions between related MSP430F201x designs.

🖥️

Portable Measurement Instrument

The MSP430F2012TPW supports a portable measurement instrument where low standby consumption, compact size, and mixed-signal integration are important. The 10-bit ADC measures the selected analog input, and the MSP430 architecture supports low-power operation between user interactions. A 2.2 V to 3.3 V operating range simplifies connection to compact sensor and communication hardware, while I2C or SPI provides flexible peripheral expansion. The instrument should use the extended-temperature TPW option when required, validate ADC accuracy across the intended signal range, and keep calibration and display buffers within the device’s limited RAM.

What are the key specifications of MSP430F2012TPW that engineers should know?
The MSP430F2012TPW is a 16 MHz, 16-bit mixed-signal microcontroller with 2 KB of Flash, 128 bytes of SRAM, and a 10-bit SAR ADC. According to the Texas Instruments product page, it also provides a 16-bit timer, ten I/O pins, and a Universal Serial Interface for I2C or SPI. The device operates from 2.2 V to 3.3 V and is offered in a 14-pin TSSOP package.
What is the operating voltage of the MSP430F2012TPW?
The MSP430F2012TPW operates from 2.2 V to 3.3 V. According to the Texas Instruments ordering information, the TPW suffix identifies the extended-temperature device rated from -40°C to +105°C. Designers should use a supply that remains within this range under transient conditions and should follow the manufacturer’s recommended decoupling network near the device.
How much memory does the MSP430F2012TPW have?
The MSP430F2012TPW provides 2 KB of Flash and 128 bytes of SRAM. According to the Texas Instruments product page, the Flash stores executable code and constants, while the small RAM supports stack operations, variables, and interrupt handling. Firmware should avoid deep recursion and large buffering structures because only 128 bytes of SRAM are available.
Does the MSP430F2012TPW support both I2C and SPI?
Yes, the MSP430F2012TPW uses its Universal Serial Interface for either I2C or SPI operation. The Texas Instruments product description identifies the USI as supporting both serial protocols, allowing the same physical interface block to be configured for sensors, memory, displays, or other serial peripherals. Select the protocol in firmware and connect only compatible signal levels to the interface pins.
What ADC does the MSP430F2012TPW contain?
The MSP430F2012TPW contains a 10-bit successive-approximation-register ADC. According to the Texas Instruments family description, this mixed-signal ADC supports embedded measurement functions without requiring a separate converter. Its resolution is suitable for controls and monitoring where 10-bit quantization is adequate, while applications requiring finer conversion resolution may need a higher-resolution external ADC.
Where can I download the MSP430F2012TPW datasheet PDF?
The MSP430F2012TPW datasheet PDF is available from Texas Instruments through the official family document link at https://www.ti.com/lit/gpn/msp430f2012. The document covers the MSP430F20x1, MSP430F20x2, and MSP430F20x3 mixed-signal microcontroller family. Use its pin descriptions, electrical characteristics, and recommended application circuits when assigning PCB functions and supply components.
Where can I find the MSP430F2012TPW pinout?
The MSP430F2012TPW pinout is shown in the pin-description section of the Texas Instruments MSP430F20x1, MSP430F20x2, and MSP430F20x3 family datasheet at https://www.ti.com/lit/gpn/msp430f2012. The package is a 14-pin TSSOP. Use the device-specific pin table rather than assigning functions from another MSP430 family member because peripheral assignments can vary.
Where can I buy MSP430F2012TPW online?
Use the Request a Quote form on this page to request MSP430F2012TPW pricing, current inventory, lead time, and order quantities. The part is identified by Texas Instruments as a 14-pin TSSOP mixed-signal MCU with a 16 MHz clock, 2 KB Flash, 128-byte SRAM, and a 10-bit ADC. Submit the exact MPN to avoid confusion with other MSP430F2012 package or temperature options.
What is the price of MSP430F2012TPW?
The current MSP430F2012TPW price and applicable quantity breaks are shown through the Request a Quote form on this page. The component is the exact 14-pin TSSOP ordering option with a 16 MHz MSP430 CPU, 2 KB Flash, 128-byte SRAM, and 10-bit ADC. Requesting a quote by full MPN also allows the supplier to confirm authorized sourcing, packaging, and expected lead time.
What is the lead time for MSP430F2012TPW?
The current lead time for MSP430F2012TPW should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, package availability, and production scheduling, so a quantity-specific confirmation is more useful than a generic stock statement. Identify the required package as 14-pin TSSOP and provide your target delivery date with the request.
Is MSP430F2012TPW in stock?
Current MSP430F2012TPW inventory is handled through the Request a Quote form on this page. The manufacturer lists the MSP430F2012 as active, and Texas Instruments identifies the MSP430F2012TPW ordering option in a 14-pin TSSOP package. Submit the quantity and required delivery date so the response can reflect current channel inventory rather than a static stock estimate.
MSP430F2012TPW vs MSP430F2012IPW: which temperature grade should I choose?
Choose the MSP430F2012TPW when the design must operate across the -40°C to +105°C range; the MSP430F2012IPW is the lower-temperature option associated with the same family. The Texas Instruments ordering information distinguishes the suffix options while retaining the 16 MHz MSP430F2012 core, 2 KB Flash, 128-byte SRAM, 10-bit ADC, and 14-pin TSSOP format. Confirm the full suffix before releasing a PCB.
When should I choose MSP430F2012TPW over another MSP430 microcontroller?
Choose MSP430F2012TPW when a compact, low-cost design needs a 16-bit MSP430 CPU, a 10-bit SAR ADC, I2C or SPI, and extended -40°C to +105°C operation. Its 2 KB Flash and 128-byte SRAM are appropriate for focused control tasks rather than protocol-heavy applications. Verify that firmware, stack depth, and serial buffers fit the small memory footprint before finalizing the design.
Is MSP430F2012TPW suitable for a battery-powered sensor node?
The MSP430F2012TPW is suitable for battery-powered sensor nodes because it belongs to the ultra-low-power MSP430 family and supports multiple low-power operating modes. Its 16 MHz CPU provides deterministic control, while the 10-bit ADC measures sensor signals and the USI connects external I2C or SPI devices. The small 128-byte SRAM makes careful interrupt and buffer design essential.
What can replace MSP430F2012TPW?
The closest same-family replacement is MSP430F2012IPW because it retains the MSP430F2012 function set and 14-pin TSSOP footprint while using a different temperature suffix. Functionally related options include MSP430F2013TPW and MSP430F2011TPW, but their ADC capabilities differ. Confirm software compatibility, temperature range, pin assignments, and required peripheral functions before treating any option as a drop-in replacement.
What is the best cross-brand equivalent for MSP430F2012TPW?
No verified cross-brand drop-in equivalent is established for the MSP430F2012TPW because the MSP430 instruction set, register map, low-power behavior, and peripheral arrangement are device-specific. The Texas Instruments MSP430F2012IPW is the closest documented same-family option. A cross-brand MCU may function at the board level but generally requires firmware, startup-code, tooling, and often PCB changes, so it is not a true pin-to-pin replacement.

Dados de referência de engenharia para MSP430F2012TPW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MSP430F2012TPW for compact, low-cost embedded designs that need a 16 MHz MSP430 CPU, 2 KB Flash, 128 bytes of SRAM, a 10-bit SAR ADC, and I2C or SPI connectivity within a 14-pin TSSOP. The TPW temperature grade extends to +105°C, making it preferable to the MSP430F2012IPW for hotter industrial environments. Select MSP430F2013TPW when a 12-bit ADC is worth the added resolution and associated firmware or cost implications. Use MSP430F2011TPW only when analog measurement is unnecessary; removing the ADC can simplify hardware but reduce functionality. No verified cross-brand device offers true drop-in equivalence because the MSP430 instruction set, register map, and peripheral architecture are proprietary. Before replacing the target, verify the exact suffix, package, temperature grade, ADC requirement, pin assignments, memory demand, and toolchain compatibility.

Comparação com alternativas

Parâmetro Este produto MSP430F2012IPW MSP430F2013TPW MSP430F2013IPW MSP430F2011TPW MSP430F2011IPW
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
Flash Memory 2 KB 2 KB 2 KB 2 KB 2 KB 2 KB
SRAM 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes
ADC Resolution 10-bit 10-bit 12-bit 12-bit No ADC No ADC
Operating Temperature Range -40°C to +105°C -40°C to +85°C -40°C to +105°C -40°C to +85°C -40°C to +105°C -40°C to +85°C
General-Purpose I/O Pins 10 pins 10 pins 10 pins 10 pins 10 pins 10 pins

Principais diferenciais

  • Higher operating-temperature ceiling (vs MSP430F2012IPW)
  • Integrated 10-bit SAR ADC (vs MSP430F2011TPW)
  • Lower converter resolution than the F2013 option (vs MSP430F2013TPW)

Notas de projeto

Treat the 2.2 V to 3.3 V rail as a regulated MCU supply and follow the decoupling configuration in the manufacturer datasheet. Place the supply capacitor close to the device and keep analog and digital return currents separated where possible. For battery-powered operation, disable unused peripherals, use the MSP430 low-power modes, and account for current from both the MCU and external sensors when calculating operating life.

The 14-pin TSSOP footprint is compact, so route the ADC input away from the USI clock lines, switching-node connections, and high-current motor paths. Place input filtering and series resistance close to the source where signal integrity matters. Maintain short ground returns and use a continuous ground plane; an analog ground region is useful only if the final partitioning does not create return-path discontinuities.

Avoid designing firmware that assumes ample RAM. The MSP430F2012TPW has 128 bytes of SRAM, so large local arrays, recursive routines, and buffered serial libraries can cause stack overflow. Keep buffers bounded, minimize interrupt nesting, and remove unused code. When moving between MSP430F201x options, verify the pin table and register-level peripheral differences even when the package remains 14-TSSOP.

If the USI is configured for SPI, route its clock with a continuous reference plane and keep the trace short, particularly when operating near the 16 MHz CPU clock. For I2C, minimize stub branches and follow the recommended pull-up arrangement. Keep programming-test points accessible if the board uses onboard programming, and check the device’s brownout behavior during power-up and power-down sequencing.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product and datasheet links do not provide explicit compliance declarations in the product information shown. Compliance fields remain unknown rather than being inferred.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MSP430F2012TPW MSP430F2012TPW datasheet MSP430F2012TPW datasheet pdf MSP430F2012TPW pinout MSP430F2012TPW equivalent MSP430F2012TPW replacement MSP430F2012TPW cross reference MSP430F2012TPW vs MSP430F2012IPW Texas Instruments MSP430F2012TPW MSP430F2012 16MHz 2KB Flash MSP430F2012 14-TSSOP pinout MSP430F2012TPW application circuit MSP430F2012TPW price MSP430F2012TPW stock

Componentes & termos relacionados

Texas Instruments MSP430F2012TPW MSP430F2012IPW MSP430F2013TPW MSP430F2013IPW MSP430F2011TPW MSP430F2011IPW MSP430F2xx MSP430 architecture 16-bit RISC microcontroller mixed-signal microcontroller embedded microcontroller semiconductor 10-bit SAR ADC Universal Serial Interface I2C SPI 14-pin TSSOP TSSOP package family surface-mount package battery-powered sensor node industrial sensor interface compact data acquisition low-power operating mode
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ