P2041NSE1MMB - QorIQ P2 Quad-Core 1.2GHz PowerPC MPU | NXP
N.º da peça: P2041NSE1MMB ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $179.52 | $179,52 |
| 10 | $161.57 | $1.615,70 |
| 100 | $143.62 | $14.362,00 |
| 500 | $125.66 | $62.830,00 |
| 1.000 | $107.71 | $107.710,00 |
P2041NSE1MMB Visão geral
A microprocessor (MPU) is a single-chip CPU that integrates the arithmetic logic unit, control unit, registers, and often cache and peripherals. Unlike microcontrollers (MCU), MPUs target applications needing high-speed external-memory throughput and high-bandwidth I/O, sitting at the top of the embedded processing hierarchy: MPU -> microprocessor -> processor -> semiconductor. The QorIQ P2 family extends the P4 architecture into lower-cost, lower-power quad-core designs.
The P2041NSE1MMB operates on a 1.0V core / 1.5-1.8V / 2.5V / 3.3V I/O supply scheme, supports encrypted secure-boot (the SE1 suffix), and runs the 0 to 105C commercial temperature grade. It is software-compatible with the P1, P3, P4, and P5 QorIQ families, allowing porting of existing PowerQUICC and QorIQ firmware. Security features include Trust Architecture 1.1 and on-chip cryptography acceleration (SEC engine).
Architecturally the P2041 uses a coherent SMP fabric connecting four e500mc cores to memory and I/O. The e500mc adds hardware virtualization (hypervisor mode) and SIMD-style multimedia extensions beyond the older e500 core, enabling broader workload consolidation. Each core has its own 32 KB I-cache and 32 KB D-cache; the platform's 256 KB L2 is shared and configurable per NXP's platform guide.
Typical applications include multi-service routers, LTE/WiMAX base-station baseband, enterprise switches, network-attached storage controllers, industrial control planes, and military/aerospace SBCs. The wide I/O mix also makes the P2041 viable for medical imaging and software-defined radio front ends.
When designing with the P2041NSE1MMB, plan for a multi-rail DC/DC tree (1.0V, 1.5/1.8V, 2.5V, 3.3V) and a large PCB escape region under the FCPBGA-780 to fan out DDR3 to 780 balls. JTAG/cOP access is required for bring-up; Trust 1.1 secure boot must be provisioned before production firmware is deployed.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para P2041NSE1MMB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com P2041NSE1MMB (mesmo formato e footprint) — diferindo em Memory Controller, Package, Core Architecture, Ethernet, Security Engine.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
P2041NSE7MMC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
P2041NXE1MMB
✅ Drop-In✓ Em estoque
$188.49 / unidade
Ver ficha técnica →P2040NSE1MMB
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$199 / unidade
Ver ficha técnica →P2020NSE1MMB
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
P2041NSE1NMB
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
P2041NSE1MMB Classificações máximas e características elétricas
| Core Architecture | PowerPC e500mc |
| Number of Cores | 4 |
| Data Width | 32-bit |
| Max Core Frequency | 1.2 GHz |
| Series | QorIQ P2 (P2041) |
| Encapsulamento | 780-FCPBGA (23x23 mm) |
| Security Engine | Encrypted, SEC (Trust 1.1) |
| Temperatura de operação | 0C to +105C |
| L2 Cache | 256 KB (shared, platform) |
| Supply Voltage (Core) | 1.0 V |
| Supply Voltage (I/O) | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Ethernet | 3x tri-speed (up to 10 GbE) |
| PCIe | 4x Gen2 controllers |
| SATA | 2 ports |
| USB | USB 2.0 |
| Memory Controller | Dual-channel DDR3 |
| Status RoHS | Compliant |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Peak Reflow Temperature | 245C (JEDEC J-STD-020) |
| Technology | CMOS |
Guia de Configuração de Pinos do P2041NSE1MMB 780-fcpbga (23x23 mm)
Configuração de pinos para P2041NSE1MMB (pacote 780-fcpbga (23x23 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para P2041NSE1MMB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
P2041NSE1MMB é adequado para 6 aplicaçãos: Multi-Service Enterprise Routers, LTE / WiMAX Base Station Baseband, Enterprise Network Switches, Network-Attached Storage (NAS) Controllers, Industrial Control & SBC Platforms, Military / Aerospace Embedded Computing.
Multi-Service Enterprise Routers
The P2041NSE1MMB's four e500mc cores and three tri-speed Ethernet MACs (up to 10 GbE) make it a strong fit for multi-service enterprise routers that need wire-speed forwarding, IPsec offload, and concurrent control-plane services. The SEC engine accelerates AES, 3DES, and SHA for VPN tunnels without loading the cores, while Trust 1.1 encrypted boot protects the routing image from tampering in the field. At 1.2 GHz across four cores, the part comfortably handles NAT, QoS, BGP/OSPF, and stateful firewall workloads with headroom for future feature growth.
Recomendado
LTE / WiMAX Base Station Baseband
For LTE and WiMAX base-station baseband, the P2041NSE1MMB delivers four e500mc cores with hardware virtualization that can be partitioned across L1/L2/L3 protocol stacks. Dual-channel DDR3 with the platform's coherency fabric keeps the high-throughput MAC/PHY streams fed, while four PCIe Gen2 lanes can connect to a companion RFIC or FPGA accelerator. The 0 to 105C operating envelope and the 1.5-3.3V tolerant I/O ease integration with mixed-signal baseband cards operating in outdoor cabinets.
Recomendado
Enterprise Network Switches
Enterprise managed switches benefit from the P2041NSE1MMB's four PCIe Gen2 controllers for stacking and uplinks, three 10 GbE-capable Ethernet MACs for uplinks, and dual SATA for local logging or configuration storage. The hardware hypervisor on the e500mc cores lets the switch run a control plane (routing, SNMP, CLI) isolated from the data plane (L2 forwarding, ACLs). The FCPBGA-780 footprint and 1.0V core supply keep board complexity manageable for 24-48 port managed switch designs.
Recomendado
Network-Attached Storage (NAS) Controllers
The P2041NSE1MMB's dual SATA ports, three Ethernet MACs, and quad-core e500mc compute make it an effective NAS controller for SMB and SOHO enclosures. The hardware SEC engine offloads SMB3/Kerberos/AES acceleration for file-service throughput, while the shared 256 KB L2 keeps metadata operations snappy. With Trust 1.1 encrypted boot, the OS image stays tamper-resistant - critical for NAS appliances exposed to the internet via remote-management UIs.
Recomendado
Industrial Control & SBC Platforms
In industrial single-board computers and control planes, the P2041NSE1MMB's 0 to 105C operating range, hardware virtualization, and rich I/O mix (PCIe, SATA, USB, Ethernet) cover PLC, HMI, and SCADA workloads. The four cores can be partitioned between real-time control and human-machine software, and the DDR3 controller supports ECC for safer operation in noisy factory environments. The FCPBGA-780 package is well-established on long-lifecycle NXP industrial designs.
Recomendado
Military / Aerospace Embedded Computing
The P2041NSE1MMB platform is widely deployed in ruggedized VME/VPX and OpenVPX single-board computers for military and aerospace applications, where its 0 to 105C operating range, PowerPC heritage, and software compatibility across the QorIQ P1-P5 families simplify long-lifecycle program support. The hardware SEC engine and Trust 1.1 secure boot meet common requirements for tamper-resistant firmware. The FCPBGA-780 package is well-supported by established aerospace SBC integrators.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para P2041NSE1MMB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | P2041NSE7MMC | P2041NXE1MMB | P2040NSE1MMB | P2020NSE1MMB | P2041NSE1NMB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCPBGA (23x23 mm) | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same |
| Cores | 4 | 4 (same) | 4 (same) | 4 (same) | 2 (-50%) | 4 (same) |
| Core Frequency | 1.2 GHz | 1.5 GHz (+25%) | 1.2 GHz (same) | 1.2 GHz (same) | 1.2 GHz (same) | 1.2 GHz (same) |
| Operating Temperature | 0C to +105C (NSE1) | -40C to +105C (NSE7, wider) | 0C to +105C (same) | 0C to +105C (same) | 0C to +105C (same) | 0C to +105C (same) |
| Secure Boot / Encryption | Encrypted, Trust 1.1 (NSE1) | Encrypted, Trust 1.1 (same) | Non-encrypted (NXE1) | Encrypted (same) | Encrypted (same) | Encrypted (same) |
| PCIe Gen2 Lanes | 4 controllers | 4 (same) | 4 (same) | Fewer SERDES lanes (reduced) | 4 (same) | 4 (same) |
| Architecture | PowerPC e500mc | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) |
Principais diferenciais
- Encrypted Trust 1.1 secure boot in the standard NSE1 speed bin (vs P2041NXE1MMB)
- Standard 1.2 GHz speed bin for the broadest thermal margin (vs P2041NSE7MMC)
- Full quad-core with the platform's highest I/O lane count (vs P2020NSE1MMB)
Notas de projeto
The P2041NSE1MMB requires a multi-rail DC/DC tree: 1.0V (Vdd_core), 1.5V or 1.8V (DDR3), 2.5V, and 3.3V I/O. Use a sequencing controller such as an NXP PF0100-compatible PMIC to enforce proper core-before-IO power-up. Estimated: at 1.2 GHz full quad-core load, core current is approximately 5-7 A on the 1.0V rail; verify against your specific workload and derate by at least 30% for transients.
Route the 780-ball FCPBGA with a microvia stack-up (at minimum 1-2-1, recommended 2-4-2) to escape the 1.0 mm pitch ball grid. Match the DDR3 traces within the platform's byte-lane length tolerance (per NXP hardware reference manual) and keep reference voltages ( VTT, Vref ) on a tight island. Expose JTAG/cOP test pads at the board edge for bring-up.
Use a 4-6 layer board with a thermal via array directly under the FCPBGA-780 to move core heat to an inner copper plane or external heatsink. At 0 to 105C ambient with full quad-core load, the device dissipates in the 5-10 W range; without adequate cooling the junction will exceed the operating limit. Provide a minimum 0.5 m/s airflow in passively-cooled enclosures.
Do not skip configuration of the SerDes reference clocks - the P2041 platform requires precise reference-clock selection per lane for PCIe and SATA links to come up reliably. Also, do not boot a production image without first provisioning Trust 1.1 secure-boot fuses, or the device will refuse to load signed firmware and appear bricked on first power-up.
Informações de conformidade
RoHS compliant per NXP product page; lead-free Sn/Ag/Cu terminal finish with 245C peak reflow per JEDEC J-STD-020. AEC-Q100 not applicable for this networking MPU. Halogen-free status not stated in the verified web data - see _validation_note.