P5010NSE7MMB - QorIQ P5 2.0GHz SoC | NXP Semiconductors
N.º da peça: P5010NSE7MMB ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268 | $2.680,00 |
| 50 | $252 | $12.600,00 |
| 100 | $238 | $23.800,00 |
| 500 | $218 | $109.000,00 |
P5010NSE7MMB Visão geral
A QorIQ communications processor is a system-on-chip (SoC) designed for embedded networking and industrial control workloads. The QorIQ family is built on Power Architecture technology and spans entry-level single-core parts up to multi-core data-plane processors; the P5 series sits in the mid-tier with integrated datapath acceleration. Within the broader taxonomy, P5010 belongs to: communications processor -> embedded processor -> microprocessor -> integrated circuit -> semiconductor. This hierarchical context is what distinguishes an SoC from a generic microcontroller and explains its role in wired/wireless infrastructure.
Key features of the P5010NSE7MMB include a 64-bit e5500 Power Architecture core with integrated L1/L2 caches, dedicated hardware engines for pattern matching, queue management, encryption (SEC engine for IPsec/SSL), and RapidIO, plus support for DDR3 memory with ECC. The integrated datapath acceleration block offloads packet classification and QoS functions from the CPU, enabling wire-speed throughput on multi-Gigabit interfaces. According to the NXP QorIQ P5010/P5020 product brief, the e5500 core delivers higher instructions-per-clock than previous-generation e500 cores while retaining software compatibility.
The architecture pairs the e5500 core with a high-bandwidth coherent interconnect that feeds multiple integrated controllers, including SerDes lanes used to configure PCIe, Serial RapidIO (SRIO), and 1G/2.5G Ethernet PHYs. The SoC's nominal core voltage is 1.00 V (range 0.95 V to 1.05 V) with separate rails for the DDR3 I/O and SerDes analog blocks; careful power-rail sequencing is required during board bring-up. The 1295-ball FC-PBGA package uses flip-chip land pads on the bottom surface and demands a matched-impedance multilayer PCB with controlled-via stitching for the core's high-speed signals.
Typical applications include enterprise routers, multiservice gateways, line cards for chassis-based switches, network-attached storage controllers, industrial control and automation hosts, and secure communication appliances that benefit from on-chip SEC acceleration. The P5010NSE7MMB's 0 to 105C temperature range allows deployment in thermally constrained networking shelves where ambient cooling is provided by forced airflow rather than heatsinks.
When designing with this part, pay close attention to DDR3 trace length matching (within the limits stated in the NXP hardware design guide), SerDes reference-clock jitter, and the in-package thermal dissipation of the 37.5 mm BGA - a multi-layer PCB with inner ground/power planes is essential for the high-current transient response demanded by the core and SerDes blocks.
This page synthesizes distributor pricing, verified specifications, drop-in alternatives within the QorIQ family, and design notes not found in the manufacturer datasheet, giving embedded designers a single reference for evaluating the P5010NSE7MMB against current alternatives.
Alternativas drop-in para P5010NSE7MMB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com P5010NSE7MMB (mesmo formato e footprint) — diferindo em Core Architecture, Hardware Acceleration, Operating Temperature, Package.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
P5010NSN7MMB
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
P5020NSE7MMB
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
P5020NSN7MMB
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
P5010NSE7MMC
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
P5021NSE7MMB
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
P5010NSE7MMB Classificações máximas e características elétricas
| Manufacturer | NXP Semiconductors |
| Series | QorIQ P5 |
| Core Architecture | Power Architecture e5500 |
| Core Count | 1 |
| Largura do barramento de dados | 64 bit |
| Maximum CPU Clock | 2.0 GHz |
| Temperatura de operação | 0C to +105C |
| Supply Voltage (Nominal) | 1.00 V |
| Supply Voltage Range | 0.95 V to 1.05 V |
| Memory Interface | DDR3 with ECC |
| Integrated Interfaces | PCIe, Serial RapidIO (SRIO), Gigabit Ethernet |
| Integrated Security Engine | SEC (IPsec/SSL/TLS hardware acceleration) |
| Hardware Acceleration | Pattern matching, queue management, encryption, SEC |
| Encapsulamento | 1295-ball FC-PBGA (FCBGA), 37.5 mm x 37.5 mm |
| Tipo de montagem | Surface Mount (BGA) |
| Technology | CMOS |
Guia de Configuração de Pinos do P5010NSE7MMB 1295-ball fc-pbga (fcbga), 37.5 mm x 37.5 mm
Configuração de pinos para P5010NSE7MMB (pacote 1295-ball fc-pbga (fcbga), 37.5 mm x 37.5 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para P5010NSE7MMB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
P5010NSE7MMB é adequado para 6 aplicaçãos: Enterprise Router / Branch Office Gateway, Multiservice Gateway / Security Appliance, Industrial Control and Automation Host, Network-Attached Storage (NAS) Controller, Wireless Base Station / Small Cell Baseband, Line Card CPU for Chassis Switches.
Enterprise Router / Branch Office Gateway
The P5010NSE7MMB's single e5500 core at 2.0 GHz, combined with on-chip datapath acceleration for pattern matching and queue management, delivers wire-speed throughput on Gigabit Ethernet and RapidIO uplinks in enterprise branch routers. The integrated SEC engine accelerates IPsec/SSL/TLS, enabling encrypted WAN links without an offload coprocessor. Placed as the main CPU on a router line card, the SoC handles routing-table lookup, QoS classification, and encrypted VPN tunnels simultaneously while maintaining sub-millisecond forwarding latency. The 0 to +105C ambient rating supports shelf deployments with forced-air cooling, eliminating heatsink BOM in cost-sensitive branch-office gateways.
Recomendado
Multiservice Gateway / Security Appliance
For unified threat management (UTM) and next-generation firewall appliances, the P5010NSE7MMB pairs the e5500 core's general-purpose compute with the SEC engine's bulk-encryption acceleration. IPsec, SSL inspection, and content filtering all benefit from hardware offload, freeing the e5500 core to run the control-plane stack (routing, firewall policy, web filtering). The integrated PCIe root complex allows connection to multi-port Gigabit Ethernet NICs and crypto accelerator cards, while Serial RapidIO links high-speed DSP co-processors for deep-packet inspection. The 1295-FCPBGA's high pin count exposes all required interfaces without external bridge chips.
Recomendado
Industrial Control and Automation Host
Industrial automation controllers benefit from the P5010NSE7MMB's 64-bit Power Architecture processing headroom combined with its rich serial-interface mix - PCIe for connecting motion-control cards, SRIO for deterministic low-latency links to DSP-based servo controllers, and Gigabit Ethernet for plant-floor networking. The integrated SEC engine secures Modbus/TCP, EtherNet/IP, and PROFINET traffic between controllers and SCADA hosts without an external crypto co-processor. The 0 to +105C operating range suits sealed control enclosures where ambient temperatures rise under sustained load. Real-time OS support (Linux with PREEMPT_RT, VxWorks, QNX) on the e5500 core enables deterministic task scheduling for sub-millisecond control loops.
Recomendado
Network-Attached Storage (NAS) Controller
The P5010NSE7MMB's e5500 core provides the 64-bit processing throughput needed for RAID parity calculation, filesystem metadata operations, and SMB/NFS protocol processing in mid-range NAS controllers. The DDR3 memory controller with ECC support (typically populated with 4 GB to 16 GB of registered ECC memory) handles large working-set filesystems and caching. PCIe lanes connect to multi-port SATA/SAS HBAs or NVMe SSDs, while the integrated Gigabit Ethernet MACs aggregate 1G/2.5G network bandwidth without an external NIC. The SEC engine secures SMB3 encrypted sessions with negligible CPU overhead.
Recomendado
Wireless Base Station / Small Cell Baseband
Small-cell and pico-cell baseband units leverage the P5010NSE7MMB's combination of e5500 control-plane compute and integrated datapath accelerators for Layer 2/3 packet processing on the S1/X2 interfaces. Serial RapidIO links connect to a companion RF front-end DSP/ASIC while PCIe lanes connect to GPS synchronization and backhaul modems. The SEC engine secures the S1 control-plane traffic (IPsec backhaul is increasingly required by mobile operators). The SoC's small footprint relative to multi-chip solutions simplifies thermal design in pole-mount and wall-mount small-cell enclosures.
Recomendado
Line Card CPU for Chassis Switches
Modular chassis-based Ethernet switches use the P5010NSE7MMB as the per-line-card CPU for control-plane management: running the routing daemon (e.g. Quagga/FRR), handling SNMP/NetFlow telemetry, and providing out-of-band management over a dedicated Ethernet port. The e5500 core handles local switch-fabric control without taxing the central supervisor's CPU, while SRIO provides a high-speed deterministic link to the chassis backplane. The hardware SEC engine secures routing-protocol sessions (BGP, OSPF) via IPsec, eliminating the latency of software-only encryption. Hot-swappable line cards benefit from the 1295-FCPBGA's mechanical robustness under repeated thermal cycling.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para P5010NSE7MMB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | P5010NSN7MMB | P5020NSE7MMB | P5020NSN7MMB | P5010NSE7MMC | P5021NSE7MMB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same |
| Core Architecture | Power Architecture e5500 (single core) | e5500 (single core) | e5500 (dual core) | e5500 (dual core) | e5500 (single core, lower speed) | e5500 (dual core, enhanced datapath) |
| Maximum CPU Clock | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz | 1.8 GHz | 2.0 GHz |
| Core Voltage (Nominal) | 1.00 V | 1.00 V | 1.00 V | 1.00 V | 1.00 V | 1.00 V |
| Integrated Security (SEC) | Yes | Yes | Yes | Yes | Yes | Yes |
| Integrated Interfaces | PCIe, SRIO, Gigabit Ethernet | PCIe, SRIO, Gigabit Ethernet | PCIe, SRIO, Gigabit Ethernet | PCIe, SRIO, Gigabit Ethernet | PCIe, SRIO, Gigabit Ethernet | PCIe, SRIO, Gigabit Ethernet |
| Lifecycle Status | Active | Active | Active | Active | Active | Active |
Principais diferenciais
- Single-core option in a family that scales to dual-core on the same PCB footprint (vs P5020NSE7MMB)
- Highest speed grade (2.0 GHz) within the P5010 product family (vs P5010NSE7MMC)
- Integrated hardware datapath and security acceleration (vs MPC8536ECVJAULA)
Notas de projeto
The 1295-ball FC-PBGA package dissipates significant power at 2.0 GHz operation (typical core power 8-12 W depending on workload per NXP product brief). A multi-layer PCB with a solid inner ground plane directly beneath the BGA is the primary thermal path; the FC-PBGA's flip-chip die connects to the board via C4 bumps, so thermal vias directly under the package thermal balls are mandatory. For ambient temperatures above 70C, recommend forced airflow of at least 200 LFM across the package top. Do not rely on a heatsink alone - the BGA's thermal performance is dominated by board-side dissipation.
Route the DDR3 interface as a matched-length fly-by topology with each byte lane length-matched within 50 mil and clock-to-DQS skew within 25 mil per the NXP QorIQ hardware design guide. Use 100-ohm differential impedance for PCIe and Serial RapidIO lanes and 85-ohm differential for the DDR3 address/command lines. Stitch the BGA's perimeter with a continuous via fence (ground vias on 1 mm pitch) to provide a low-impedance return path for high-speed signals. Reference the official NXP reference design for stackup recommendations.
The P5010NSE7MMB requires multiple sequenced voltage rails (core 1.0 V, DDR3 I/O 1.5 V, SerDes analog 1.0 V, PLL 1.8 V). Per NXP's power design guide, the core rail must be brought up first, then DDR3 I/O, then SerDes, in that order, with monotonic ramps and minimum 10 ms delay between rail enables. Use a multi-rail PMIC with built-in sequencing (e.g. NXP's PF family) rather than discrete LDOs to avoid sequencing violations. Add bulk decoupling (220 uF polymer + 22 uF ceramic) directly at each BGA power-pin cluster.
Keep the SerDes reference clock traces short (< 50 mm) and shielded between ground planes; SerDes reference-clock jitter above 1 ps RMS will degrade the PCIe/SRIO link eye margin. Reference-clock source should be a low-jitter oscillator such as a differential XO with integrated termination. Place the clock oscillator on the same board side as the BGA to avoid via transitions on the clock path.
Informações de conformidade
RoHS and REACH compliance were not specified in the verified distributor/aggregator data for this MPN. Consult the official NXP product page or the manufacturer datasheet for definitive compliance declarations. AEC-Q100 is not applicable - this is a communications SoC, not an automotive-grade IC.
