PEX8718-AB80BI - PCIe Gen3 16-Lane 5-Port Switch | Broadcom
N.º da peça: PEX8718-AB80BI ✓ AtivoPEX8718-AB80BI Visão geral
A PCI Express switch is a semiconductor that expands one host interface into multiple downstream links and routes traffic among PCIe endpoints. Within the broader hierarchy, it is a PCI Express interface IC, a multiprotocol I/O controller, and a semiconductor designed for high-speed serial interconnect. Unlike a passive PCIe component or a conventional analog switch, the PEX8718 actively manages PCIe transactions and link traffic. Its multi-host architecture allows separate host domains to reach their respective endpoints through a shared switching fabric.
The defining characteristics of the PEX8718-AB80BI are its 16-lane configuration, five-port arrangement, and 8.0 GT/s PCIe Gen 3 operation. The Broadcom ExpressLane PEX8718 documentation identifies the device as suitable for scalable, high-bandwidth, non-blocking interconnection. The 324-FCBGA package provides a high pin count suitable for the numerous signal, power, ground, and configuration connections required by a multi-lane switching device. The physical dimensions also support dense server and storage system designs.
In a multi-host platform, the switch can fan a set of downstream endpoints out to multiple host connections, aggregate traffic through a common switching point, or support peer-to-peer communication between PCIe devices. Its 16 lanes provide the architectural basis for parallel PCIe links, while the five ports organize those lanes into distinct connectivity roles. The exact lane allocation, port configuration modes, supported device types, power behavior, and electrical limits must be established from the manufacturer’s configuration documentation before schematic or firmware design begins.
Typical uses include server consolidation platforms, storage systems, communications equipment, and other PCIe fabrics that benefit from non-blocking multi-host connectivity. The PEX8718-AB80BI is particularly relevant when several computational or storage nodes need deterministic access to PCIe endpoints without implementing every interconnect function in host silicon. A board designer should reserve the package footprint, route high-speed PCIe lanes according to the manufacturer’s reference layout, and provide the required power and configuration resources.
The principal design tradeoff is integration versus flexibility. A five-port switch consolidates complex PCIe routing into one fabric controller, but it also requires careful lane mapping, reference-clock design, power delivery, signal-integrity management, and software enumeration. Existing server or storage platforms should confirm support for the PEX8718 before adoption because PCIe switches depend on compatible host controllers, endpoint types, operating-system support, and firmware integration.
This product record combines Broadcom product documentation, channel listing details, commercial sourcing guidance, and engineering-focused selection notes. It emphasizes the verified 16-lane, five-port, 8.0 GT/s configuration and clearly separates documented capabilities from parameters that require confirmation in the final design reference, preventing unsupported assumptions about electrical, thermal, or firmware limits.
Alternativas drop-in para PEX8718-AB80BI — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasPEX8718-AB80BI Classificações máximas e características elétricas
| Product Type | PCI Express switch IC |
| PCI Express Generation | PCIe Gen 3 |
| Maximum Data Rate | 8.0 GT/s |
| Total Lane Configuration | 16 lanes |
| Port Count | 5 ports |
| Switching Architecture | Multi-host, non-blocking PCIe switch |
| Interconnect Applications | Fan-out, aggregation, and peer-to-peer |
| Package Type | 324-FCBGA |
| Package Dimensions | 19 x 19 mm |
| Surface-Mount Classification | Surface-mount semiconductor package |
| Target Application | Servers, storage systems, and communications platforms |
| Signal Type | PCI Express serial differential signaling |
Guia de Configuração de Pinos do PEX8718-AB80BI 19 x 19 mm
Configuração de pinos para PEX8718-AB80BI (pacote 19 x 19 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para PEX8718-AB80BI.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PEX8718-AB80BI é adequado para 6 aplicaçãos: Multi-Host Server Consolidation, Storage System Fan-Out, PCIe Aggregation Platform, Peer-to-Peer PCIe Communication, Communications Platform Interconnect, PCIe Fan-Out Backplane.
Multi-Host Server Consolidation
The PEX8718-AB80BI fits server consolidation platforms that need several hosts to reach PCIe endpoints through a common switch fabric. Its documented 16 lanes, five ports, and 8.0 GT/s PCIe Gen 3 operation provide the basis for scalable, non-blocking interconnection, while the multi-host architecture supports distinct host domains and their respective endpoints. A server designer can use this arrangement to centralize endpoint access, reduce duplicated host-side switching, and organize storage or accelerator resources. The principal implementation work is lane allocation, endpoint enumeration, isolation policy, and firmware coordination. Thermal design must also account for the complete 324-FCBGA assembly because the switch concentrates high-speed I/O, power delivery, and return-path activity in one package.
Storage System Fan-Out
The PEX8718-AB80BI is suited to storage systems that need multiple PCIe paths for controllers, disks, expanders, or other endpoints. Broadcom identifies storage systems as a target application for the PEX8718 and describes the switch as a non-blocking, high-bandwidth interconnect for fan-out, aggregation, and peer-to-peer traffic. With 16 lanes and five ports at an 8.0 GT/s Gen 3 data rate, the device can provide a structured PCIe topology instead of relying on separate direct host-to-endpoint routes. Storage-system integration still requires confirmation of supported endpoint types, lane-to-port mapping, discovery behavior, and the required host and operating-system support. Power sequencing and loss-of-signal handling should be designed against the manufacturer’s platform requirements.
PCIe Aggregation Platform
The PEX8718-AB80BI fits aggregation equipment that brings several PCIe endpoints behind a managed switching layer. Its five-port arrangement and 16-lane capacity support a topology in which compatible endpoints communicate through a central fabric, while the 8.0 GT/s Gen 3 rate defines the per-lane signaling performance. This is useful in communications and industrial computing platforms where direct host wiring would become cumbersome as endpoint count grows. The switch’s non-blocking architecture is intended to avoid a simple shared-bus bottleneck. Designers must still map each link to the intended peer relationship, configure routing and enumeration, validate congestion behavior under real traffic, and preserve reference-clock and power-domain behavior across every port.
Peer-to-Peer PCIe Communication
The PEX8718-AB80BI can serve peer-to-peer PCIe systems in which compatible devices communicate without making every endpoint a direct host peripheral. Broadcom specifically identifies peer-to-peer interconnection as an intended use of the PEX8718, and the switch provides a five-port, 16-lane PCIe Gen 3 fabric for such topologies. This makes it relevant to specialized accelerator, embedded-computing, and communications arrangements where endpoint-to-endpoint traffic must be coordinated. Correct implementation requires explicit routing and discovery rules, compatible device drivers, appropriate isolation, and verification of transition and recovery behavior. The switch simplifies physical topology management, but it does not remove the need for application-level arbitration, data ownership rules, or operating-system support.
Communications Platform Interconnect
The PEX8718-AB80BI applies to communications platforms that connect multiple hosts and PCIe endpoint functions through a common switching fabric. Its documented 16-lane, five-port configuration and 8.0 GT/s Gen 3 operation support scalable, high-bandwidth interconnection, while the multi-host feature allows separate hosts to reach their associated endpoints. This topology can help organize line cards, control processors, fabric controllers, or monitoring functions around a consistent PCIe backbone. Board-level implementation must follow the manufacturer’s routing and reference-design guidance, especially for differential pair geometry, clock distribution, power sequencing, and return paths. Firmware support and endpoint compatibility should be validated before committing the switch to a production communications platform.
PCIe Fan-Out Backplane
The PEX8718-AB80BI is appropriate for a PCIe fan-out backplane that distributes endpoint access among several downstream ports. Its five-port switch and 16-lane total configuration make it suitable for scalable connections, while the 8.0 GT/s Gen 3 rate supports the high-bandwidth, non-blocking behavior described by Broadcom. A backplane designer can place the switch between host-facing and endpoint-facing connections to create a structured tree or multi-root topology. Practical implementation requires strict lane mapping, loss-of-signal detection, adequate power delivery, and signal-integrity verification across the complete board. The 324-FCBGA package also requires a layout and thermal strategy consistent with its 19 x 19 mm body and dense ball field.
Dados de referência de engenharia para PEX8718-AB80BI — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Notas de projeto
Use the Broadcom PEX8718 reference layout and package drawing as the authority for the 324-FCBGA footprint. Preserve the documented orientation, ball-map revision, power and ground assignments, and exposed thermal interface. Do not infer the footprint solely from the 19 x 19 mm body size. PCIe differential pairs, especially links intended to operate at 8.0 GT/s, should follow the manufacturer’s reference geometry and maintain continuous return paths.
Confirm every supply rail, sequencing requirement, current limit, and decoupling value against the current Broadcom PEX8718 documentation before schematic release. Separate high-current and sensitive supply distribution as directed by the reference design, place local bulk and high-frequency decoupling at the relevant package balls, and verify the assembled board under maximum traffic and the worst thermal condition. Power sequencing errors can affect PCIe link training as well as endpoint behavior.
Plan the PEX8718-AB80BI heat path during component placement rather than after layout completion. The 324-FCBGA package is suitable for dense systems, but sustained switching activity and power loss can raise junction temperature. Use the manufacturer’s thermal model and land pattern, provide an effective thermal interface where specified, and validate the final enclosure, airflow, ambient temperature, and adjacent heat sources. Confirm production solder-joint reliability after the thermal strategy is selected.
Do not treat the similar PEX8717-CA80BC-G listing as a substitute without a detailed comparison of package, balls, lanes, ports, reference clocks, configuration registers, and firmware behavior. Likewise, avoid treating the trailing G suffix as proof of a different or equivalent functional device. Reconcile the exact Broadcom ordering code, datasheet revision, and package drawing before releasing a schematic, footprint, or procurement line item.
Informações de conformidade
The available product listings do not state the requested compliance status for the exact PEX8718-AB80BI ordering code. Confirm environmental, finish, and material declarations with the manufacturer before qualification.