PI7C9X442SLBFDEX - PCIe to USB 2.0 Switch | Diodes
N.º da peça: PI7C9X442SLBFDEX ✓ AtivoPI7C9X442SLBFDEX Visão geral
A PCI Express-to-USB interface is a specialized bridge controller within the broader hierarchy of interface ICs, PCI and PCIe devices, and semiconductor solutions. Its packet-switch function manages PCI Express traffic while its USB host controller provides connectivity for peripherals that use the USB 2.0 protocol. This integration can reduce the number of separate interface devices required in a compact embedded system.
The principal documented features of the PI7C9X442SLBFDEX are its combined PCI Express packet-switch and USB 2.0 host-controller architecture, 128-LQFP surface-mount package, and 14 x 14 mm body size. The product is identified as an active interface component. Its 128-pin package provides the extensive external connections required for multiple lanes, control signals, power rails, and USB host interfaces.
Technical architecture centers on two distinct protocol responsibilities within one device. The PCI Express packet switch handles transactions arriving through the PCI Express interface, while the USB 2.0 host controller manages attachment and data transfer for USB devices. This consolidation can simplify system routing compared with separate switch and host-controller devices, although the complete electrical and firmware requirements remain application-specific.
Typical applications include notebook-computer accessory interfaces, PCI Express docking systems, embedded industrial controllers, USB expansion platforms, and data-acquisition systems that expose USB peripherals through a PCIe host. The 128-LQFP footprint is intended for multilayer PCB layouts with high-speed routed signals and controlled power distribution. Exact lane, speed, voltage, and timing limits should be confirmed in the manufacturer datasheet before schematic release.
Layout and power integrity are critical when deploying this controller. Place decoupling capacitors adjacent to the relevant supply pins, maintain the manufacturer-recommended layer stack and impedance geometry, and route high-speed differential pairs continuously over a solid reference plane. Confirm exposed-pad and thermal-management requirements against the package drawing before finalizing the board outline and assembly process.
This product page combines manufacturer-level device positioning, package information, compatibility-focused alternatives, structured comparison data, and practical PCB-design guidance. It helps engineers narrow the interface choice and plan the hardware while keeping all unconfirmed electrical details subject to verification in the manufacturer datasheet.
Alternativas drop-in para PI7C9X442SLBFDEX — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PI7C9X442SLBFDEX (mesmo formato e footprint).
PI7C9X442SLBFDE
✅ Drop-InConsulte o preço
Ver ficha técnica →PI7C9X2G404SLBFDE
✅ Drop-InConsulte o preço
Ver ficha técnica →PI7C9X442SLBFDEX Classificações máximas e características elétricas
| Device Type | PCI Express-to-USB 2.0 interface controller |
| Integrated Functions | PCI Express packet switch and USB 2.0 host controller |
| PCI Express Interface | PCI Express |
| USB Interface | USB 2.0 host |
| Package Type | 128-LQFP |
| Package Body Size | 14 x 14 mm |
| Contagem de pinos | 128 pins |
| Tipo de montagem | Surface mount |
| Product Classification | Specialized interface IC |
| Status do ciclo de vida | Active |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do PI7C9X442SLBFDEX 14 x 14 mm
Configuração de pinos para PI7C9X442SLBFDEX (pacote 14 x 14 mm). Este dispositivo de potência possui terminais de gate, drain e source. Para pacotes não polarizados, consulte o datasheet do fabricante para a orientação exata do pino 1 e detalhes do footprint. Aplicações comuns incluem projeto de fontes de alimentação, acionamento de motores e comutação de cargas.
Nenhum dado detalhado de pinagem disponível para PI7C9X442SLBFDEX.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PI7C9X442SLBFDEX é adequado para 6 aplicaçãos: Notebook Computer Interface, PCI Express Docking Station, Industrial USB Expansion, Embedded Data Acquisition, PCI Express Embedded Controller, Test and Measurement Equipment.
Notebook Computer Interface
The PI7C9X442SLBFDEX fits notebook-computer platform designs that need a dedicated path between a PCI Express host and USB 2.0 peripherals. Its integrated PCI Express packet-switch and USB 2.0 host-controller functions reduce the need for separate interface devices. The 128-LQFP package provides dedicated routing flexibility for high-speed signals and control functions. Engineers should confirm the supported PCIe configuration, USB port count, power rails, and firmware support in the manufacturer datasheet before schematic release. Thermal and signal-integrity planning are also important because the 14 x 14 mm controller carries multiple high-speed interfaces into a compact system.
Recomendado
PCI Express Docking Station
A PCI Express docking system can use the PI7C9X442SLBFDEX to combine packet-switching and USB 2.0 host support in the dock controller area. This architecture is useful when a compact dock must expose legacy USB devices through a PCIe-based host platform. The 128-LQFP package supports multilayer routing, but differential-pair geometry, connector escape paths, and return-path continuity require careful planning. Validate the required USB port count, PCIe lane configuration, power-management behavior, and device enumeration before hardware freeze because those details govern connector assignment and firmware support.
Recomendado
Industrial USB Expansion
The PI7C9X442SLBFDEX is applicable to industrial platforms that need USB 2.0 peripheral access through a PCI Express fabric. Its integrated packet-switch and host-controller functions can simplify control of multiple USB-facing paths in equipment such as test systems, data-acquisition units, and machine controllers. The primary design consideration is maintaining signal and power integrity across a larger board with longer routing distances. Apply the manufacturer's reference layout, place decoupling close to supply pins, and verify the supported industrial temperature grade and USB enumeration behavior in the ordering documentation.
Recomendado
Embedded Data Acquisition
Embedded data-acquisition equipment can place the PI7C9X442SLBFDEX between its PCI Express processing path and USB 2.0 measurement peripherals. Combining the packet-switch and host-controller functions provides a dedicated interface solution for instruments that require backward-compatible USB connectivity. The 128-LQFP package requires adequate board area for high-density escape routing and a multilayer stack suitable for controlled impedance. Confirm lane widths, timing constraints, supply sequencing, and supported USB device classes in the manufacturer datasheet before selecting the controller for a new acquisition platform.
Recomendado
PCI Express Embedded Controller
The PI7C9X442SLBFDEX suits embedded controllers that use PCI Express as the internal interconnect and USB 2.0 as an external service interface. The combined controller can support configuration, maintenance, and peripheral connections without allocating separate devices for each protocol function. Because the device carries both high-speed domains, PCB implementation must include uninterrupted reference planes, compliant differential impedance, and carefully separated return paths. Review the package pin table to determine the required clock, configuration, reset, and power connections, and verify operating-temperature limits for the target enclosure.
Recomendado
Test and Measurement Equipment
The PI7C9X442SLBFDEX can support test and measurement instruments that expose USB 2.0-compatible devices through a PCI Express-based internal architecture. This is useful in programmable test systems where a host processor communicates with external peripherals over USB while maintaining a structured internal interconnect. The principal design work includes confirming supported transfer modes, device enumeration, power requirements, and clock topology. Route high-speed interfaces according to the manufacturer reference layout and use uninterrupted reference planes to limit crosstalk, impedance discontinuities, and EMI radiation.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PI7C9X442SLBFDEX — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PI7C9X442SLBFDE | PI7C9X2G404SLBFDE |
|---|---|---|---|
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| Package | 128-LQFP (14x14) | 128-LQFP (14x14) | 128-LQFP (14x14) |
| Primary Function | PCI Express-to-USB 2.0 interface controller | PCI Express-to-USB 2.0 interface controller | PCI Express USB interface controller |
| Integrated Functions | PCIe packet switch + USB 2.0 host controller | PCIe packet switch + USB 2.0 host controller | PCIe and USB interface functions |
| PCI Express Interface | PCI Express | PCI Express | PCI Express |
| USB Interface | USB 2.0 host | USB 2.0 host | USB |
| Pin Count | 128 pins | 128 pins | 128 pins |
Principais diferenciais
- Closest documented same-package replacement (vs PI7C9X442SLBFDE)
- Integration of PCIe packet switching and USB host control (vs PI7C9X2G404SLBFDE)
- Exact target suffix for controlled procurement (vs PI7C9X442SLBFDE)
Notas de projeto
Use the manufacturer reference layout as the starting point for the 128-LQFP layout. Place all required bypass capacitors directly beside their associated supply pins, route high-speed differential pairs over a continuous reference plane, and avoid plane splits beneath signal paths. The integrated PCI Express and USB interfaces should be treated as separate high-speed domains with controlled return paths. Confirm the exact stackup, impedance targets, and land-pattern details against the manufacturer package drawing before fabrication.
Verify PCIe and USB signal integrity with the final stackup and enclosure rather than relying only on schematic connectivity. Match differential impedance to the manufacturer requirements, minimize stub effects, sequence connector and device escape routes, and keep switching-node or unrelated high-current paths away from sensitive inputs. If the PCB requires layer transitions, follow the manufacturer's recommended return vias. Post-layout extraction and eye or compliance measurements should be planned for the production design.
Partition analog, digital, and USB-related supply distribution only as directed by the manufacturer datasheet, because incorrect isolation can add noise or disturb signal references. Place bulk and high-frequency decoupling at the appropriate supply entry points and include local ceramic capacitance at each IC power pin. Validate startup current, voltage sequencing, and the maximum permitted rail tolerance using the final power-supply design. Do not infer a supply value from generic USB or PCIe system rails.
Do not substitute a similar 128-LQFP controller solely because the package outline matches. The PI7C9X442SLBFDE is the closest documented candidate, but suffix-dependent ordering characteristics must be checked. The PI7C9X2G404SLBFDE uses the same 128-LQFP family but may allocate signals differently, so compare every power, ground, clock, configuration, PCIe, and USB connection against the complete manufacturer pin tables before approving it as a drop-in replacement.
Informações de conformidade
RoHS3-compliant status is stated in the product listing. The PI7C9X442SLBFDEX is an interface IC rather than an AEC-Q100 automotive-qualified device.