Microchip Technology

PIC12F629-E/MF - 8-Bit 20MHz Flash MCU | Microchip

N.º da peça: PIC12F629-E/MF ✓ Ativo
2.5V, 3.3V, and 5V Vdss 8-pin DFN-S (6x5 mm) Package 20MHz Speed 1.75KB (1K x 14 words) Memory
MOQ: 1 |

PIC12F629-E/MF Visão geral

The Microchip Technology PIC12F629-E/MF is an 8-bit, 20MHz CMOS Flash microcontroller with 1.75KB of program memory, 64 bytes of RAM, six general-purpose I/O pins, and an 8-pin DFN-S package. The -E grade supports an extended temperature range of -40°C to +125°C, while the compact 6x5 mm surface-mount package suits space-constrained control systems. The device executes its instruction set in as little as 200 nanoseconds and supports a compact instruction set of 35 single-word instructions.

A Flash-based 8-bit microcontroller is a compact embedded-control device combining a processor core, nonvolatile program memory, data RAM, I/O ports, and embedded peripherals in one package. The PIC12F629 belongs to the PIC12 family of 8-bit CMOS microcontrollers and is positioned for simple control, timing, signal-generation, and low-pin-count automation tasks. Its small instruction set can simplify firmware development while dedicated oscillator and timer resources support deterministic embedded operation.

Key device characteristics include 20MHz maximum operation, 1.75KB of Flash program memory organized as 1K by 14 words, 64 bytes of RAM, and six I/O pins. The -E/MF ordering identifies the extended-temperature device in Microchip's DFN-S package. A factory-programmable configuration is also indicated by the -E designation, allowing application-specific configuration before delivery. These resources are sufficient for compact logic controllers, timers, indicators, simple motor-control tasks, and embedded control modules.

The device combines internal oscillator capability, programmable code protection, watchdog-timer support, and a 35-instruction set in a low-pin-count architecture. The PIC12F629 is optimized for applications that need more than basic logic but do not require a large RAM budget, high pin count, or high-resolution analog conversion. Compared with the closely related PIC12F675, the PIC12F629 omits the A/D converter while retaining the same core memory configuration, making it appropriate when discrete or digital sensing is sufficient.

Typical uses include building automation controls, battery-powered sensor interfaces, compact timers, status indicators, simple motor or relay controllers, and educational embedded projects. The six available I/O pins support key sensing, actuation, and status functions, while 64 bytes of RAM support modest state retention between instruction cycles. Designers should avoid workloads requiring substantial buffers, multiple communication peripherals, or high-resolution analog measurement.

A critical design consideration is operating voltage compatibility. The device supports 2.5V, 3.3V, and 5V operation, so external sensors, pull-up networks, and output devices must remain within the same supply domain. Place decoupling capacitance close to VDD and VSS, keep the exposed package pad connected according to the manufacturer's land pattern, and confirm oscillator and timing requirements against the device's operating-speed limits.

This product page combines the manufacturer's core device specifications with package-specific ordering information, extension-temperature details, pin-assignment guidance, practical application analysis, and an honest assessment of same-footprint alternatives. It is intended to help engineers determine whether the PIC12F629-E/MF fits a compact industrial, control, or embedded-learning design before requesting a quote.

Alternativas drop-in para PIC12F629-E/MF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com PIC12F629-E/MF (mesmo formato e footprint) — diferindo em Package, Operating Temperature, Watchdog Timer, Mounting Type, I/O Pins.

Microchip Technology
Package: 8-DFN-S (6 mm x 5 mm)
Watchdog Timer: Yes
Microchip Technology
Package: 8-pin DFN-S EP (MF), 3 mm x 3 mm, 0.90 mm height
Operating Temperature: -40C to +125C (E = Extended)
Mounting Type: Surface Mount, Tape & Reel
Microchip Technology
Package: 8-pin DFN-S (6 x 5 mm), 'MF' suffix
Operating Temperature: -40 C to +125 C (Extended, 'E' suffix)
I/O Pins: 6
Microchip Technology
Package: 8-pin DFN-S EP (3 x 3 x 0.90 mm)
Operating Temperature: -40 C to +85 C (industrial)
Watchdog Timer: Yes, with dedicated on-chip oscillator

PIC12F629-I/MF

✅ Drop-In ⚠️ Especificações não verificadas
Microchip Technology
📦 8-pin DFN-S (6x5 mm)
8-bit CMOS Flash microcontroller · 20 MHz · 1.75 KB Flash (1K x 14 words) · 64 bytes RAM · 6 pins · 200 ns · 35 single-word instructions · 1 channel

Consulte o preço

Ver ficha técnica →

PIC12F629T-I/MF

✅ Drop-In
📦 8-pin DFN-S (6x5 mm)
Temperature grade changes from -E to -I and the T ordering code changes the shipping format; core speed, Flash, RAM, and pin configuration remain the same.

📋 Alternativa de referência (fora do catálogo)

PIC12F629T-E/MF

✅ Drop-In ⚠️ Especificações não verificadas
Microchip Technology
📦 8-pin DFN-S (6x5 mm)
8-bit Flash Microcontroller (MCU) · PIC12 mid-range, 14-bit instruction set, RISC · 1.75 KB (1792 words of 14-bit) · 64 bytes · 128 bytes · 20 MHz (5 MIPS, 200 ns instruction cycle) · 4.5 V to 5.5 V · 6

Consulte o preço

Ver ficha técnica →

PIC12F675-I/MF

✅ Drop-In ⚠️ Especificações não verificadas
Microchip Technology
📦 8-pin DFN-S (6x5 mm)
8-bit PIC mid-range (RISC Harvard) · 1.75 KB (1K x 14 words) · 64 bytes · 128 bytes · 20 MHz (200 ns instruction cycle) · 35 single-word instructions · 6 (GPIO0-GPIO5) · 10-bit, 4 channels

Consulte o preço

Ver ficha técnica →

PIC12F675-E/MF

✅ Drop-In ⚠️ Especificações não verificadas
Microchip Technology
📦 8-pin DFN-S (6x5 mm)
8-bit PIC RISC · 35 single-word instructions · 1.75 KB Flash (1K x 14) · 64 bytes · 128 bytes · 20 MHz (200 ns instruction cycle) · 6 · 10-bit, 4 channels

Consulte o preço

Ver ficha técnica →

PIC12F629-E/MF Classificações máximas e características elétricas

Microcontroller Type 8-bit CMOS Flash microcontroller
Maximum CPU Frequency 20MHz
Minimum Instruction Execution Time 200ns
Instruction Set 35 single-word instructions
Flash Program Memory 1.75KB (1K x 14 words)
Data RAM 64 bytes
General-Purpose I/O Pins 6
Operating Voltage Options 2.5V, 3.3V, and 5V
Faixa de temperatura de operação -40°C to +125°C
Encapsulamento 8-pin DFN-S (6x5 mm)
Tipo de montagem Surface mount
Program Memory Type Flash
Watchdog Timer Supported
Programmable Code Protection Supported

Configuração de pinos do PIC12F629-E/MF

QFN-8 (2x2mm, EP) Package Pinout Diagram QFN-8 2x2mm, P0.5mm, EP 0.7x1.3mm, JEDEC MO-229. Pin 1 by dot. 1 2 3 4 5 6 7 8 QFN-8 (2x2mm, EP)
Pino 1 GP1/PCINT1 — General-purpose I/O pin with interrupt-capable input function
Pino 2 GP2/PCINT2 — General-purpose I/O pin with interrupt-capable input function
Pino 3 GP0 — General-purpose I/O pin
Pino 4 VSS — Ground reference connection
Pino 5 MCLR/VPP — Master clear and programming voltage input
Pino 6 VDD — Positive supply-voltage connection
Pino 7 GP5/OSC1/CLKIN — General-purpose I/O or oscillator input
Pino 8 GP4/OSC2/CLKOUT — General-purpose I/O or oscillator output

Aplicações típicas

PIC12F629-E/MF é adequado para 6 aplicaçãos: Building Automation Control, Battery-Powered Sensor Interface, Compact Timer and Sequencer, Simple Relay and Actuator Control, Industrial Status Indicator Panel, Embedded Learning and Prototype Controller.

🏭

Building Automation Control

The PIC12F629-E/MF is suitable for compact building-control modules that supervise switches, indicators, relays, or simple sensors. Six I/O pins provide enough external connections for a small controller, while the 20MHz CPU supports responsive task scheduling and debounce handling. Its -40°C to +125°C rating also covers temperature variation encountered in controlled equipment rooms, panels, and industrial building infrastructure. The 1.75KB Flash footprint is adequate for fixed control logic, while the 64-byte RAM can hold counters and short-lived state. Place the MCU beside the connector field, use a local regulator for the supported 3.3V or 5V rail, and keep the 8-pin DFN-S layout close to the ground-connected exposed pad for predictable thermal performance.

🧩

Battery-Powered Sensor Interface

PIC12F629-E/MF can serve as the control element in a small battery-powered sensing module when the design uses digital or comparator-based sensing. Its six I/O pins permit connection of switches, digital sensors, status LEDs, and a low-duty-cycle actuator, and the 20MHz core allows efficient multiplexing within the limited memory budget. The 64 bytes of RAM can support short counters and state variables, while 1.75KB of Flash accommodates a compact control program. Because the MCU lacks the PIC12F675's 10-bit A/D converter, analog front-end outputs must be converted to a digital decision or handled by another device. Use the extended-temperature grade for installations exposed to cold or heated environments, and minimize activity around the oscillator pins to reduce power and signal-noise coupling.

⏱️

Compact Timer and Sequencer

The PIC12F629-E/MF is a practical choice for standalone timers, delayed-action modules, pulse generators, and small sequencing controllers. A 200ns minimum instruction execution time provides ample timing headroom at the 20MHz maximum clock, allowing the firmware to combine event counting with output state management. Six I/O pins can drive indicator LEDs, control relay stages, or feed a downstream interface, and the 64-byte RAM is sufficient for counters and state flags in a small sequence. The DFN-S 6x5 mm package preserves board area in compact control products. For accurate timing, derive the scheduler from a stable oscillator source, avoid placing noisy switching nodes beside the oscillator-capable pins, and validate timing across the intended -40°C to +125°C operating range.

⚡

Simple Relay and Actuator Control

PIC12F629-E/MF can control low-complexity actuator boards where a relay, solenoid driver, lamp, or latch is driven from a small number of digital outputs. Its six I/O pins allow separation between control inputs and output drivers, while the 20MHz core can execute interlocks, debounce logic, and timed transitions without a larger controller. The 64-byte RAM supports operating-state tracking, and the 1.75KB Flash capacity is appropriate for fixed safety checks and startup sequences. Because inductive loads can inject transients, use suitable isolation and suppression networks, keep high-current paths away from the MCU and its decoupling, and confirm that each driver remains compatible with the selected 2.5V, 3.3V, or 5V supply domain.

📺

Industrial Status Indicator Panel

The PIC12F629-E/MF is well matched to a compact status panel that combines several LEDs, pushbuttons, alarm outputs, and a supervisory function. Its six I/O pins can support a mix of inputs and outputs, while the 20MHz execution speed allows debouncing and priority-based alarm handling. The 1.75KB Flash memory accommodates lookup tables and communication-independent control logic, and the 64-byte RAM is sufficient for a short event history or operating counters. The small 6x5 mm DFN-S package leaves room for connectors and indicator components in a dense panel. Use the extended-temperature grade in industrial cabinets, route LED and relay currents away from sensitive pins, and place the supply bypass capacitor close to VDD with a short, low-impedance return to VSS.

🔧

Embedded Learning and Prototype Controller

PIC12F629-E/MF provides a compact platform for embedded-learning exercises, low-cost prototypes, and small control demonstrations. The 35-instruction set reduces the amount of machine-specific programming required, while the six I/O pins allow students or engineers to connect LEDs, buttons, a display interface, and basic sensors. A 20MHz clock supports demonstrations involving counters, state machines, timing, and low-speed serial communication without occupying much board area. The 64-byte RAM and 1.75KB Flash capacity also make memory limitations visible during firmware planning. Use the manufacturer programming documentation to configure the device, isolate unused I/O pins where appropriate, and add accessible test points so prototype boards can be debugged without redesigning the compact DFN-S layout.

What are the key specifications of PIC12F629 that engineers should know?
The PIC12F629 is an 8-bit CMOS Flash microcontroller rated for operation up to 20MHz, with 1.75KB of program memory, 64 bytes of RAM, and six general-purpose I/O pins. According to the Microchip PIC12F629/675 datasheet, the device uses a 35-instruction set and can execute instructions in as little as 200 nanoseconds. The PIC12F629-E/MF combines this core with a -40°C to +125°C temperature range and an 8-pin DFN-S package measuring 6x5 mm.
Where can I download the PIC12F629 datasheet PDF?
The official PIC12F629/675 datasheet PDF can be downloaded from Microchip Technology through the product documentation link on this page. According to Microchip, the document covers the PIC12F629 and PIC12F675 in 8-pin PDIP, SOIC, and MLF-S packages. The datasheet includes the device block diagram, pinout description, electrical characteristics, and programming information needed to establish the package connections and operating limits.
Where can I find the PIC12F629 pinout?
The PIC12F629 pinout is documented in the Pinout Description table of the official Microchip PIC12F629/675 datasheet. The PIC12F629-E/MF uses an 8-pin DFN-S configuration with VDD, VSS, MCLR/VPP, two oscillator-capable I/O pins, and four general-purpose I/O pins. Use the manufacturer's pin-description table when assigning PCB tracks, particularly for the exposed pad and the MCLR/VPP function.
What is the difference between PIC12F629 and PIC12F675?
The PIC12F629 and PIC12F675 have the same core architecture, 1.75KB Flash memory, 64 bytes of RAM, and 20MHz maximum operating frequency, but the PIC12F675 includes a 10-bit A/D converter. According to the Microchip PIC12F629/675 datasheet, that converter is the principal functional difference. Choose the PIC12F629 for digital-only control and the PIC12F675 when direct analog-to-digital measurement is required.
PIC12F629-E/MF vs PIC12F629-I/MF: which is better for industrial use?
PIC12F629-E/MF is generally the better choice when the design requires operation from -40°C to +125°C, while PIC12F629-I/MF uses the industrial temperature range associated with the -I grade. Both retain the 20MHz core, 1.75KB Flash memory, 64 bytes of RAM, six I/O pins, and 8-pin DFN-S package. Verify the complete ordering-code temperature grade in the Microchip datasheet before releasing production hardware.
When should I choose PIC12F629-E/MF over PIC12F675-E/MF?
Choose PIC12F629-E/MF when the application is digital-only and does not require on-chip analog measurement. It provides the same 1.75KB Flash memory, 64 bytes of RAM, six I/O pins, 20MHz maximum clock, and 8-pin DFN-S footprint as the PIC12F675 family member, but omits the 10-bit A/D converter. This can simplify firmware, reduce unused analog circuitry, and preserve PCB compatibility when analog inputs are not needed.
What is the best drop-in replacement for PIC12F629-E/MF?
The closest same-footprint replacements are factory-programmable or temperature-grade variants of the PIC12F629 in the 8-pin DFN-S package, such as PIC12F629-I/MF and PIC12F629T-I/MF. The -E and -I suffixes change the temperature grade, while the T suffix identifies the packaging format. According to Microchip ordering information, confirm programming, temperature requirements, and exposed-pad layout before treating any variant as a production drop-in replacement.
Can PIC12F675-E/MF replace PIC12F629-E/MF?
PIC12F675-E/MF can share the 8-pin DFN-S footprint with PIC12F629-E/MF and adds a 10-bit A/D converter, but it is not a firmware-transparent replacement. The Microchip datasheet states that the devices are identical except for the PIC12F675 converter. Existing firmware that expects no ADC hardware may need revision, and all pin assignments, timing, and reset behavior should be checked against the specific schematic.
How do I program a PIC12F629 microcontroller?
A PIC12F629 is programmed through its serial programming interface using a compatible programmer and the device's programming specification. The official Microchip datasheet provides the electrical and connection requirements for programming, while Microchip's programming toolchain supplies the user interface and device support. Confirm connector voltage levels, MCLR/VPP handling, program voltage, and target isolation on the production fixture before programming assembled boards.
What projects are suitable for PIC12F629?
The PIC12F629 is well suited to compact timers, building-control interfaces, battery-powered sensor nodes, status indicators, simple relay controllers, and educational projects. Its six I/O pins provide enough connections for basic sensing and actuation, while the 20MHz core allows responsive multiplexing and timing. According to the Microchip datasheet, the 64-byte RAM and 1.75KB Flash capacity are appropriate for lightweight control rather than protocol-heavy or data-intensive systems.
Can PIC12F629-E/MF operate at 3.3V and 5V?
Yes, PIC12F629-E/MF supports operation at 2.5V, 3.3V, and 5V according to the Microchip device documentation. The selected supply must remain compatible with every connected sensor, pull-up, communications interface, and actuator. Designers should also check each peripheral's enabled-state current and the maximum operating frequency because low-voltage operation can affect timing margins.
Where can I buy PIC12F629-E/MF online?
Use the Request a Quote form on this page to request PIC12F629-E/MF availability, current commercial terms, and a lead-time quotation. The request should identify the exact ordering code PIC12F629-E/MF, the 8-pin DFN-S package, the -40°C to +125°C temperature grade, and any factory programming requirements. This avoids confusion with PDIP, SOIC, or DFN variants that have the same base device name but different package suffixes.
What is the price of PIC12F629-E/MF?
The current commercial price for PIC12F629-E/MF should be obtained through the Request a Quote form on this page. The quote request should specify quantity, tube or reel packaging, and whether factory programming is required. The device's base MPN, DFN-S package, and extended-temperature grade should remain unchanged throughout procurement so that the quotation corresponds to the exact installed part.
What is the lead time and stock status for PIC12F629-E/MF?
Current stock and lead time for PIC12F629-E/MF should be requested through the Request a Quote form on this page. Include the required quantity, packaging format, programming status, and target delivery date. Because factory-programmed and non-programmed configurations can have different fulfillment paths, identify those requirements in the request before accepting the quoted schedule.
Is there a verified cross-brand drop-in equivalent for PIC12F629-E/MF?
No verified cross-brand drop-in equivalent for PIC12F629-E/MF is established by the available manufacturer and cross-reference information. A different manufacturer's 8-pin microcontroller may have a similar footprint, but Flash organization, reset programming, oscillator behavior, timer mappings, and peripheral functions must all match before replacement is safe. Use the Request a Quote form for the original Microchip part, and treat any cross-brand proposal as a new design qualification rather than an automatic substitution.

Dados de referência de engenharia para PIC12F629-E/MF — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose PIC12F629-E/MF for compact digital-only embedded control that requires a 20MHz 8-bit core, 1.75KB Flash, 64-byte RAM, six I/O pins, and operation from -40°C to +125°C. Select PIC12F629-I/MF when the industrial temperature grade is preferred, or PIC12F629T-E/MF when the T production format suits the assembly process. Consider PIC12F675-I/MF or PIC12F675-E/MF when an integrated 10-bit A/D converter justifies a firmware review and provides analog measurement capability. The MCU is appropriate for timers, compact controllers, status panels, simple actuators, and sensor interfaces, but it is not a direct substitute for a larger MCU when substantial RAM, multiple serial peripherals, high pin count, or advanced analog performance is required. Verify package dimensions, exposed-pad construction, programming method, and temperature grade before production release.

Comparação com alternativas

Parâmetro Este produto PIC12F629-I/MF PIC12F629T-I/MF PIC12F629T-E/MF PIC12F675-I/MF
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin DFN-S (6x5 mm) 8-pin DFN-S (6x5 mm) 8-pin DFN-S (6x5 mm) 8-pin DFN-S (6x5 mm) 8-pin DFN-S (6x5 mm)
CPU Architecture 8-bit PIC CMOS 8-bit PIC CMOS 8-bit PIC CMOS 8-bit PIC CMOS 8-bit PIC CMOS
Maximum CPU Frequency 20MHz 20MHz 20MHz 20MHz 20MHz
Flash Program Memory 1.75KB (1K x 14) 1.75KB (1K x 14) 1.75KB (1K x 14) 1.75KB (1K x 14) 1.75KB (1K x 14)
Data RAM 64 bytes 64 bytes 64 bytes 64 bytes 64 bytes
General-Purpose I/O Pins 6 6 6 6 6
Analog-to-Digital Converter None None None None 10-bit A/D converter
Temperature Grade -40°C to +125°C (-E) -I industrial grade -I industrial grade -40°C to +125°C (-E) -I industrial grade

Principais diferenciais

  • Extended-temperature ordering option (vs PIC12F629-I/MF)
  • Lower functional complexity for digital-only control (vs PIC12F675-I/MF)
  • Exact core and memory alignment with the T-order variant (vs PIC12F629T-E/MF)

Notas de projeto

Follow the Microchip DFN-S land pattern exactly, including the exposed pad and its thermal-via pattern. Connect the exposed pad to the device's ground recommendation, provide a short VDD-to-VSS bypass capacitor at the supply pins, and route oscillator-capable pins away from switching nodes. The six I/O pins are limited, so assign pin multiplexing early and avoid reserving a footprint for an analog function that the PIC12F629 does not provide.

Design the supply for the selected 2.5V, 3.3V, or 5V operating condition and check every external pull-up, sensor, and output driver against that rail. Place local decoupling close to VDD and VSS, keep return-current paths compact, and confirm peripheral current consumption during enabled operation. If the board also drives relays or actuators, isolate those transients from the MCU supply so that switching events do not create reset or timing failures.

Do not substitute the PIC12F675 solely because its DFN-S footprint matches. According to the Microchip datasheet, the PIC12F675 adds a 10-bit A/D converter, which changes register usage and may require firmware revision even though the core memory resources remain the same. Also verify that MCLR/VPP is connected for the intended programming and reset scheme and that unused oscillator-capable pins have stable levels to prevent unintended oscillation.

Keep the MCLR/VPP trace short and protect it from noisy relay or motor-switching paths. Maintain controlled return flow beneath the MCU and exposed pad, and place input filtering close to the relevant I/O pins rather than allowing transient currents to enter the device area. Because only 64 bytes of RAM are available, avoid placing unrelated filtering or communication buffers on the same MCU if deterministic timing is important.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The extended-temperature ordering suffix does not by itself establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly identified in the manufacturer information reviewed.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

pic12f629 pinout pic12f629 datasheet pic12f629 programming pic12f629 price pic12f629 projects pic12f629 datasheet pdf PIC12F629-E/MF pinout PIC12F629-E/MF datasheet PIC12F629-E/MF equivalent PIC12F629-E/MF replacement PIC12F629-E/MF vs PIC12F675-E/MF PIC12F629 DFN-S footprint Microchip PIC12F629 microcontroller PIC12F629-E/MF stock

Componentes & termos relacionados

Microchip Technology PIC12F629-E/MF PIC12F629 PIC12F675 PIC12F629-I/MF PIC12F629T-I/MF PIC12F629T-E/MF PIC12F675-I/MF PIC12F675-E/MF 8-bit microcontroller Flash-based microcontroller embedded control PIC12 family CMOS 20MHz CPU 1.75KB Flash memory 64-byte RAM general-purpose I/O 10-bit A/D converter MCLR/VPP DFN-S QFN family surface-mount package industrial automation sensor interface
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ