PIC16C64AT-04I/L - 4MHz 8-bit OTP MCU 3.5KB | Microchip PLCC-44
N.º da peça: PIC16C64AT-04I/L ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $9.5 | $9,50 |
| 10 | $8.55 | $85,50 |
| 100 | $7.6 | $760,00 |
| 500 | $6.84 | $3.420,00 |
| 1.000 | $6.08 | $6.080,00 |
PIC16C64AT-04I/L Visão geral
An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, RAM, program memory, and peripherals on a single die. MCUs are classified by bit-width, memory type, and architectural family; the PIC16CXX belongs to the classic PIC mid-range family, a Harvard RISC architecture that emphasizes deterministic instruction timing, low power, and a compact 35-instruction instruction set. The OTP memory flavor means the part is programmed once and is typically used in production runs where firmware is finalized and stable.
Key features include a high-performance RISC CPU with only 35 single-word instructions to learn, DC to 4MHz clock input, 33 I/O pins with individual direction control, programmable code protection, power-on reset, watchdog timer with on-chip RC oscillator, and an industrial temperature range of -40C to +85C. The device also integrates a 14-bit instruction word with 8-bit data path, hardware stack, and multiple timer/counter modules suitable for embedded control tasks.
The PIC16C64A architecture uses a modified Harvard design with separate program and data buses, allowing instruction fetch and operand read to occur in the same cycle. The OTP EPROM cell enables windowed programming for prototyping with UV erasure, while the industrial-grade ceramic windowed CDIP variant exists for development and engineering samples. The PLCC-44 footprint is well-suited for socketed programming and rework in legacy industrial designs.
Typical applications include industrial automation controllers, HVAC fan and pump controls, appliance control boards, security and access control panels, and automotive body electronics (non-safety). The 33 I/O count and 128-byte RAM make it suitable for keypad scanning, LED or relay driving, and UART-based communication in mid-complexity embedded designs.
When designing with this part, ensure the 4V-5.5V supply is well regulated, leave unused I/O pins configured as outputs and tied low to minimize current consumption, and use the watchdog timer for reliable recovery from software lockups. The OTP memory cannot be reprogrammed in-circuit; a Flash-based PIC16F equivalent is recommended for prototypes requiring iterative firmware updates.
This page synthesizes distributor pricing, drop-in alternatives in the same PLCC-44 footprint, and practical design notes that go beyond the manufacturer datasheet.
Alternativas drop-in para PIC16C64AT-04I/L — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16C64AT-04I/L (mesmo formato e footprint) — diferindo em Mounting Type, Core Architecture, Operating Temperature, Timers, Watchdog Timer.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16C64A-04I/L
✅ Drop-In✓ Em estoque
$4.5 / unidade
Ver ficha técnica →PIC16C64AT-04I/PQ
✅ Drop-In✓ Em estoque
$7.55 / unidade
Ver ficha técnica →PIC16C64A-10I/L
✅ Drop-In✓ Em estoque
$3.45 / unidade
Ver ficha técnica →PIC16C64A-20I/L
✅ Drop-In✓ Em estoque
$3.1 / unidade
Ver ficha técnica →PIC16F877A-I/L
✅ Drop-In✓ Em estoque
$7.12 / unidade
Ver ficha técnica →PIC16C64AT-04I/L Classificações máximas e características elétricas
| Product Family | PIC16C Microcontroller |
| Core Architecture | 8-bit RISC (Harvard) |
| Program Memory Size | 3.5 KB (2K x 14) OTP |
| RAM Size | 128 bytes |
| Frequência máxima de clock | 4 MHz |
| Supply Voltage Range | 4 V to 5.5 V |
| Number of I/O Pins | 33 |
| Instruction Set Size | 35 instructions (single word) |
| Instruction Word Width | 14 bits |
| Data Path Width | 8 bits |
| Faixa de temperatura de operação | -40 C to +85 C (Industrial) |
| Package Type | 44-pin PLCC |
| Package Dimensions | 16.59 x 16.59 mm |
| Tipo de montagem | Surface Mount (J-Lead) |
| Watchdog Timer | Yes (on-chip RC oscillator) |
| Power-On Reset | Yes |
Configuração de pinos do PIC16C64AT-04I/L
| Pino 1 | MCLR/VPP — Master Clear (Reset) input / Programming voltage |
| Pino 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Pino 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Pino 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| Pino 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / Voltage reference |
| Pino 6 | RA4/T0CKI — PORTA bit 4 / Timer 0 clock input |
| Pino 7 | RA5/SS/AN4 — PORTA bit 5 / Slave Select / Analog input 4 |
| Pino 8 | RE0/RD/AN5 — PORTE bit 0 / Read control / Analog input 5 |
| Pino 9 | RE1/WR/AN6 — PORTE bit 1 / Write control / Analog input 6 |
| Pino 10 | RE2/CS/AN7 — PORTE bit 2 / Chip Select / Analog input 7 |
| Pino 11 | VDD — Positive supply voltage |
| Pino 12 | VSS — Ground reference |
| Pino 13 | OSC1/CLKIN — Oscillator input / External clock input |
| Pino 14 | OSC2/CLKOUT — Oscillator output / Clock output |
| Pino 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock |
| Pino 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Pino 17 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Pino 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Pino 19 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| Pino 20 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| Pino 21 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| Pino 22 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| Pino 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Pino 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pino 25 | RC6/TX/CK — PORTC bit 6 / UART TX / Clock |
| Pino 26 | RC7/RX/DT — PORTC bit 7 / UART RX / Data |
| Pino 27 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| Pino 28 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| Pino 29 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port bit 6 |
| Pino 30 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port bit 7 |
| Pino 31 | VSS — Ground reference |
| Pino 32 | VDD — Positive supply voltage |
| Pino 33 | RB0/INT — PORTB bit 0 / External interrupt |
| Pino 34 | RB1 — PORTB bit 1 |
| Pino 35 | RB2 — PORTB bit 2 |
| Pino 36 | RB3 — PORTB bit 3 |
| Pino 37 | RB4 — PORTB bit 4 |
| Pino 38 | RB5 — PORTB bit 5 |
| Pino 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pino 40 | RB7/PGD — PORTB bit 7 / ICSP data |
| Pino 41 | NC — Not connected |
| Pino 42 | NC — Not connected |
| Pino 43 | NC — Not connected |
| Pino 44 | NC — Not connected |
Aplicações típicas
PIC16C64AT-04I/L é adequado para 6 aplicaçãos: Industrial Automation Controllers, HVAC Fan and Pump Controls, Appliance Control Boards, Security and Access Control Panels, Automotive Body Electronics (Non-Safety), Test and Measurement Instruments.
Industrial Automation Controllers
The PIC16C64AT-04I/L fits industrial automation controllers with its 33 I/O pins capable of driving relays, sensors, and HMI keypads. The 128-byte RAM handles state machine variables, while the 4MHz clock supports UART communication at standard baud rates up to 38.4 kbps. Hardware watchdog timer recovers from software faults in motor and valve control applications, critical for unattended machinery. The -40C to +85C industrial temperature range tolerates factory floor environments, and the OTP memory suits mature firmware designs deployed in high-volume production lines.
Recomendado
HVAC Fan and Pump Controls
The PIC16C64AT-04I/L is well suited for HVAC fan and pump control boards where 33 I/O pins can interface with temperature sensors, triac drivers, and LED status indicators. The 14-bit instruction set provides efficient PID loop implementation for closed-loop fan speed and pressure regulation. Operating from a regulated 5V supply, the device's low CMOS power consumption keeps standby current minimal for energy-efficient appliance designs. Industrial temperature grade ensures reliable operation in unconditioned plant rooms.
Recomendado
Appliance Control Boards
The PIC16C64AT-04I/L integrates washing machine, dishwasher, and microwave oven control functions with its OTP memory locking in production firmware permanently. The Harvard RISC architecture provides deterministic interrupt response for time-critical sequencing of motor drivers, valves, and heating elements. Power-on reset and watchdog timer prevent lockups in white goods appliances, while the 33 I/O pins accommodate matrix keypads, seven-segment displays, and buzzer drivers. Surface-mount PLCC-44 packaging supports automated assembly.
Recomendado
Security and Access Control Panels
The PIC16C64AT-04I/L addresses keypad readers, door controllers, and intrusion alarm panels requiring stable OTP firmware preventing field tampering. The 128-byte RAM stores user credential buffers and event logs in real time, while the 33 I/O pins scan 4x4 keypads, drive piezoelectric buzzers, and read magnetic reed switches. UART peripherals support communication with central alarm panels at standard baud rates. Industrial temperature operation tolerates outdoor cabinet environments.
Recomendado
Automotive Body Electronics (Non-Safety)
The PIC16C64AT-04I/L serves non-safety automotive body control modules such as seat controllers, mirror adjusters, and ambient lighting systems. The 5V operation interfaces directly with automotive 12V bus via regulator, while the -40C to +85C industrial temperature range covers cabin environments. The watchdog timer and power-on reset handle automotive voltage transients and cranking conditions. OTP memory locks firmware at production, ensuring field reliability across vehicle service life.
Recomendado
Test and Measurement Instruments
The PIC16C64AT-04I/L drives handheld multimeters, cable testers, and bench-top instrumentation requiring deterministic real-time control. The 35-instruction RISC set implements measurement state machines efficiently, while the 33 I/O pins drive LCD segments, button inputs, and range selection relays. The 4MHz clock generates precise timing references for frequency counters and capacitance meters. OTP memory locks calibrated firmware preventing unauthorized recalibration in field-deployed instruments.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16C64AT-04I/L — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16C64A-04I/L | PIC16C64AT-04I/PQ | PIC16C64A-10I/L | PIC16C64A-20I/L | PIC16F877A-I/L |
|---|---|---|---|---|---|---|
| Package | PLCC-44 | PLCC-44 (same) | MQFP-44 (same pin count) | PLCC-44 (same) | PLCC-44 (same) | PLCC-44 (same) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 10 MHz | 20 MHz | 20 MHz |
| Program Memory | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 14 KB Flash |
| RAM Size | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 368 bytes |
| Number of I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Memory Type | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | Flash |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
Principais diferenciais
- Tape and reel packaging for SMT automation (vs PIC16C64A-04I/L)
- Higher 10 MHz clock speed option available (vs PIC16C64A-10I/L)
- Flash reprogrammability for iterative development (vs PIC16F877A-I/L)
Notas de projeto
Power the PIC16C64AT-04I/L from a regulated 5V rail with both VDD pins (11 and 32) connected and both VSS pins (12 and 31) grounded. Place a 100 nF decoupling capacitor within 5 mm of each VDD pin and a 10 uF bulk capacitor near the IC. Power-on reset is internal but the MCLR pin (pin 1) should be pulled high through a 10 kohm resistor to VDD with optional 100 nF to ground for noise immunity. Supply voltage must remain within 4.0V to 5.5V; brownout below 4V can cause EPROM read errors.
OTP memory cannot be reprogrammed: any firmware bug in production becomes permanent. Always validate firmware thoroughly on a windowed PIC16C64A/JW prototype or Flash PIC16F877A-I/L equivalent before committing to OTP programming. Configure unused I/O pins as outputs and tie them low to minimize current consumption. The watchdog timer should be enabled in critical applications and periodically cleared via CLRWDT to reset the MCU on software faults.
Route the crystal traces (OSC1/OSC2, pins 13-14) as short as possible and keep them away from high-current switching traces to prevent clock corruption. For 4 MHz operation, use a 4 MHz crystal with 22 pF load capacitors to ground on each oscillator pin. Place the PLCC-44 socket footprint on the PCB so that pin 1 is identifiable via chamfered corner marking; include a decoupling capacitor land pattern under the socket if board area permits for improved EMI performance.
Informações de conformidade
RoHS and lead-free status not explicitly stated in the verified web data for PIC16C64AT-04I/L. Industrial temperature grade (-40C to +85C) is qualified but not AEC-Q100 automotive. Legacy OTP parts often predate RoHS transition; confirm compliance with distributor before environmental-sensitive designs.
