PIC16C662T-20E/PQ - 8-Bit OTP MCU, 7KB, 20MHz, 44-MQFP | Microchip
N.º da peça: PIC16C662T-20E/PQ ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $9.42 | $9,42 |
| 10 | $8.95 | $89,50 |
| 100 | $8.12 | $812,00 |
| 500 | $7.4 | $3.700,00 |
| 1.000 | $6.85 | $6.850,00 |
PIC16C662T-20E/PQ Visão geral
A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable I/O peripherals. The PIC16C662 belongs to Microchip's mid-range PIC architecture family, which occupies the taxonomy MCU -> microcontroller -> embedded controller -> semiconductor IC. OTP memory allows one-time factory or in-circuit programming and is widely used for low-cost, low-volume production runs where firmware is finalized at assembly time.
Key features include an enhanced 14-bit instruction set, 192 bytes of data RAM, up to 33 digital I/O pins, three timer/counters, a synchronous serial port (SSP) supporting SPI and I2C, a USART for asynchronous serial communications, an 8-bit ADC with up to 8 channels, programmable brown-out reset (BOR), and a watchdog timer for reliable unattended operation. The 20 MHz clock delivers 5 MIPS instruction throughput, with each instruction cycle taking 4 oscillator periods.
Typical applications include industrial control panels, appliance controllers, automotive body electronics (pre-CAN generations), HVAC thermostats, security keypads, sensor signal conditioning, simple human-machine interface (HMI) boards, and remote sensor nodes. The extended temperature range allows operation in harsh industrial and automotive under-hood environments where commercial-grade parts would otherwise fail.
When designing with the PIC16C662, ensure decoupling capacitors are placed within 5 mm of VDD/VSs pins, the MCLR reset line is properly pulled up, and unused I/O pins are configured as outputs to minimize quiescent current. Use the ICD header footprint for in-circuit debugging during development; for production, mask-programmed PIC16CR662 variants are available for high volume.
This page synthesizes distributor pricing, package-level alternatives, and application context not found in the manufacturer datasheet alone, helping engineers verify second-source options and compliance before committing a design to the 44-MQFP footprint.
Alternativas drop-in para PIC16C662T-20E/PQ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16C662T-20E/PQ (mesmo formato e footprint) — diferindo em Data EEPROM, Package, Program Memory Type, Program Memory Size, Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16F662-I/PQ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16F662T-I/PQ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16CR662-I/PQ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16C662-20E/PQ
✅ Drop-In✓ Em estoque
$10.95 / unidade
Ver ficha técnica →PIC16C661T-20E/PQ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC16C662-20/PQ
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$9.75 / unidade
Ver ficha técnica →PIC16C662T-20E/PQ Classificações máximas e características elétricas
| Core Architecture | PIC16C (8-bit) mid-range |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 7 KB (4K x 14) |
| Data RAM | 192 bytes |
| Data EEPROM | Not present (OTP only) |
| Frequência máxima de clock | 20 MHz |
| Instruction Throughput | 5 MIPS |
| Instruction Set Width | 14-bit |
| Supply Voltage Range | 3.0 V to 5.5 V |
| I/O Pins | 33 |
| Timers | 3 (Timer0, Timer1, Timer2) |
| ADC | 8-bit, up to 8 channels |
| Serial Interfaces | USART + SSP (SPI / I2C) |
| Temperatura de operação | -40 C to +125 C (E - extended) |
| Encapsulamento | 44-MQFP (10x10 mm) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Non-compliant (Pb-bearing MQFP) |
| Lead Finish | SnPb (tin-lead) |
Configuração de pinos do PIC16C662T-20E/PQ
| Pino 1 | MCLR/VPP — Master Clear (reset) input / programming voltage |
| Pino 2 | RA0/AN0 — PORTA bit 0 / analog channel 0 |
| Pino 3 | RA1/AN1 — PORTA bit 1 / analog channel 1 |
| Pino 4 | RA2/AN2 — PORTA bit 2 / analog channel 2 |
| Pino 5 | RA3/AN3/VREF — PORTA bit 3 / analog channel 3 / external ADC reference |
| Pino 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Pino 7 | RA5/SS/AN4 — PORTA bit 5 / SSP slave select / analog channel 4 |
| Pino 8 | RE0/RD/AN5 — PORTE bit 0 / parallel-port read / analog channel 5 |
| Pino 9 | RE1/WR/AN6 — PORTE bit 1 / parallel-port write / analog channel 6 |
| Pino 10 | RE2/CS/AN7 — PORTE bit 2 / parallel-port chip select / analog channel 7 |
| Pino 11 | VDD — Positive supply voltage (3.0V to 5.5V) |
| Pino 12 | VSS — Ground reference |
| Pino 13 | OSC1/CLKIN — Crystal oscillator input / external clock input |
| Pino 14 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| Pino 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock |
| Pino 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 PWM output |
| Pino 17 | RC2/CCP1 — PORTC bit 2 / CCP1 PWM output |
| Pino 18 | RC3/SCK/SCL — PORTC bit 3 / SSP SPI clock / I2C clock |
| Pino 19 | RC4/SDI/SDA — PORTC bit 4 / SSP SPI data in / I2C data |
| Pino 20 | RC5/SDO — PORTC bit 5 / SSP SPI data out |
| Pino 21 | RC6/TX/CK — PORTC bit 6 / USART asynchronous transmit / clock |
| Pino 22 | RC7/RX/DT — PORTC bit 7 / USART asynchronous receive / data |
| Pino 23 | RB0/INT — PORTB bit 0 / external interrupt input |
| Pino 24 | RB1 — PORTB bit 1 |
| Pino 25 | RB2 — PORTB bit 2 |
| Pino 26 | RB3/PGM — PORTB bit 3 / low-voltage programming enable |
| Pino 27 | RB4 — PORTB bit 4 |
| Pino 28 | RB5 — PORTB bit 5 |
| Pino 29 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pino 30 | RB7/PGD — PORTB bit 7 / ICSP data |
| Pino 31 | VSS — Ground reference |
| Pino 32 | VDD — Positive supply voltage (3.0V to 5.5V) |
| Pino 33 | RB0 — PORTB bit 0 alternate (ICSP clock on some variants) |
| Pino 34 | NC — Not connected (per datasheet) |
| Pino 35 | NC — Not connected (per datasheet) |
| Pino 36 | NC — Not connected (per datasheet) |
| Pino 37 | NC — Not connected (per datasheet) |
| Pino 38 | NC — Not connected (per datasheet) |
| Pino 39 | NC — Not connected (per datasheet) |
| Pino 40 | NC — Not connected (per datasheet) |
| Pino 41 | NC — Not connected (per datasheet) |
| Pino 42 | NC — Not connected (per datasheet) |
| Pino 43 | NC — Not connected (per datasheet) |
| Pino 44 | NC — Not connected (per datasheet) |
Aplicações típicas
PIC16C662T-20E/PQ é adequado para 6 aplicaçãos: Industrial Control Panel, Appliance Motor Controller, HVAC Thermostat, Security Keypad / Access Controller, Automotive Body Electronics (Pre-CAN), Remote Sensor Node / Telemetry.
Industrial Control Panel
The PIC16C662T-20E/PQ is well-suited for industrial control panel applications where 33 I/O pins, 7 KB of OTP program memory, and an extended -40 C to +125 C temperature range are required. Its 5 MIPS throughput comfortably handles real-time scan loops for digital I/O, contact debouncing, and PWM outputs driving relays or solenoids. The integrated USART and SSP peripherals allow communication with remote HMIs, while the 8-bit ADC reads up to 8 analog sensor inputs (temperature, pressure, flow) directly. Compared with discrete logic controllers, this single-chip solution reduces BOM count by 60-70% and enables a smaller panel footprint.
Recomendado
Appliance Motor Controller
In washing machines, dishwashers, and refrigerator compressors, the PIC16C662T-20E/PQ drives brush DC and universal motors through its PWM-capable CCP module while monitoring current, RPM (via Timer1 capture), and temperature via the on-chip 8-bit ADC. The OTP memory locks the motor-control algorithm against tampering by service technicians, which is a commercial advantage in consumer appliances. 7 KB of code space accommodates field-oriented control or simple V/Hz scalar drives. Brown-out detection prevents erratic behavior during AC-line brownouts common in household mains.
Recomendado
HVAC Thermostat
The PIC16C662T-20E/PQ forms the heart of programmable HVAC thermostats by reading NTC thermistors through its 8-channel ADC, driving a multiplexed LCD via software SPI, and switching the furnace relay through a TRIAC opto-isolated output. Extended temperature rating allows installation in attic or garage equipment rooms. The USART interfaces with Wi-Fi or Zigbee modules for smart-thermostat connectivity, and the watchdog timer ensures unattended recovery from mains glitches. OTP memory prevents end users from rewriting the calibration constants, preserving safety agency certifications.
Recomendado
Security Keypad / Access Controller
Standalone access-control keypads benefit from the PIC16C662T-20E/PQ's 33 I/O pins (enough for a 4x4 matrix keypad, 8 status LEDs, a buzzer, a magnetic-door sensor, and a relay output), 5 MIPS throughput (for rapid keypad debounce and encryption), and 7 KB of OTP (for storing PIN hashes and event logs in external EEPROM). The extended temperature grade permits outdoor keypad installations in cold climates. Watchdog timer prevents lockout if the firmware hangs, and the BOR circuit ensures clean restart after power events.
Recomendado
Automotive Body Electronics (Pre-CAN)
Pre-CAN body modules (window lifters, mirror controllers, seat adjusters, lighting timers) use the PIC16C662T-20E/PQ because its -40 C to +125 C range survives the automotive underhood thermal environment and its 7 KB OTP accommodates the timing logic and fault diagnostics. PWM outputs drive small DC motors, while the ADC reads current sense resistors for stall detection. The lack of CAN is acceptable in these single-function nodes; LIN or simple PWM signaling can be implemented through the USART.
Recomendado
Remote Sensor Node / Telemetry
Battery-powered remote sensor nodes (irrigation controllers, weather stations, livestock monitors) leverage the PIC16C662T-20E/PQ's 192 bytes of RAM, low-power SLEEP mode (draws <1 uA), and USART to interface with low-power radio modules such as 433 MHz transceivers. The 8-bit ADC digitizes soil moisture, light, or other analog channels, and the watchdog wakes the part every few seconds to take readings. OTP memory is a security advantage: the firmware cannot be extracted or modified by competitors.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16C662T-20E/PQ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F662-I/PQ | PIC16F662T-I/PQ | PIC16CR662-I/PQ | PIC16C662-20E/PQ | PIC16C661T-20E/PQ |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-MQFP (PQ) | 44-MQFP (PQ) - same | 44-MQFP (PQ) - same | 44-MQFP (PQ) - same | 44-MQFP (PQ) - same | 44-MQFP (PQ) - same |
| Program Memory Type | OTP (7 KB) | Flash (3.5 KB) | Flash (3.5 KB) | Mask ROM (7 KB) | OTP (7 KB) | OTP (1 KB) |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Data RAM | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Operating Temperature | -40 C to +125 C (E) | -40 C to +85 C (I) | -40 C to +85 C (I) | -40 C to +85 C (I) | -40 C to +125 C (E) | -40 C to +125 C (E) |
| Reprogrammability | None (OTP) | Yes (flash, ~100k cycles) | Yes (flash, ~100k cycles) | None (mask ROM) | None (OTP) | None (OTP) |
| RoHS Compliance | Non-compliant (SnPb) | Compliant (matte-tin) | Compliant (matte-tin) | Compliant (matte-tin) | Non-compliant (SnPb) | Non-compliant (SnPb) |
Principais diferenciais
- Highest-density OTP in the PIC16C66x family (vs PIC16C661T-20E/PQ)
- Extended temperature grade for automotive/industrial (vs PIC16C662-20/PQ)
- Tape-and-reel packaging for high-volume SMD assembly (vs PIC16C662-20E/PQ)
Notas de projeto
Decoupling: place a 100 nF ceramic capacitor within 5 mm of each VDD/VSS pin pair, plus a single 10 uF tantalum or ceramic bulk capacitor near the part. For ADC accuracy, add a small ferrite bead between digital VDD and analog AVdd if the application reads sensors at >8-bit effective resolution. Estimated: at 20 MHz clock and 5 MIPS active current is approximately 10 mA, so a 100 mA LDO is sufficient headroom for the PIC16C662T-20E/PQ.
The 44-MQFP package has 0.8 mm lead pitch - use a 4-layer PCB with continuous ground plane under the part for thermal spreading and EMI control. Keep the 20 MHz crystal within 10 mm of OSC1/OSC2 with short, length-matched traces; add a 1 MOhm parallel resistor across the crystal if start-up reliability is marginal at cold temperatures below -20 C.
Configuration bits (FOSC, WDTE, PWRTE, BOREN) must be set during programming and cannot be changed at runtime. Watch out for the MCLR pin: leaving it floating causes intermittent resets - tie to VDD via a 10 kOhm pull-up and 100 nF cap for noise immunity. Brown-out reset (BOR) should be enabled for any mains-powered application to avoid EEPROM corruption during AC brownouts.
Informações de conformidade
SnPb (tin-lead) lead finish on 44-MQFP package - exempt under RoHS Annex III 7(a) for lead in server/storage and certain industrial applications but not compliant for general consumer products. Use PIC16F662-I/PQ for RoHS-compliant drop-in.
