PIC16C67T-10I/PQ - 14KB OTP 8-bit MCU, 10MHz, 44-QFP | Microchip
N.º da peça: PIC16C67T-10I/PQ ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $11.5 | $11,50 |
| 10 | $10.35 | $103,50 |
| 100 | $9.2 | $920,00 |
| 500 | $8.05 | $4.025,00 |
| 1.000 | $7.2 | $7.200,00 |
PIC16C67T-10I/PQ Visão geral
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and peripheral I/O on one die. The PIC16C67 belongs to Microchip's mid-range PIC® family, a register-rich RISC architecture optimized for deterministic interrupt response and very low static power consumption. PIC MCUs sit within the broader category of microcontrollers -> embedded processors -> integrated circuits. This device family pioneered Harvard memory architecture, OTP program memory, and instruction-pipelined execution - foundations that drove the widespread adoption of 8-bit MCUs in industrial control, automotive body electronics, and hobbyist embedded designs through the late 1990s and 2000s.
The PIC16C67 integrates a 10-bit, 8-channel Analog-to-Digital Converter (ADC), a Universal Synchronous/Asynchronous Receiver-Transmitter (USART), a Synchronous Serial Port (SSP) for SPI and I²C, three 16-bit timer/counters, a Capture/Compare/PWM (CCP) module, and a parallel Slave Port. The wide digital I/O count (33 pins) plus analog and serial peripherals make it suitable for mixed-signal embedded nodes. The 14KB OTP memory holds the application firmware and is one-time programmable, which limits the part to production-grade designs where code is finalized.
The mid-range PIC core executes most instructions in a single 200 ns cycle at 10 MHz and supports 35 instructions, 8 hardware stacks, and 8 levels of hardware interrupt priority. The 14-bit instruction word keeps code density high compared with 8-bit CISC MCUs of the same era. Power consumption is typically under 15 mA active at 5V/10 MHz, with brown-out reset, watchdog timer, and power-on reset built in.
Typical applications include industrial control panels, motor control front-ends, instrumentation data acquisition, automotive body controllers, security systems, and embedded sensor hubs. Its 33 I/O pins comfortably drive segmented displays, keypads, and LED indicators alongside analog sensor inputs. In production white-label appliances, the OTP memory prevents code extraction, supporting IP protection.
When designing with the PIC16C67, ensure programming socket compatibility if you plan to migrate to PIC16F flash variants. Brown-out reset and watchdog timer should be enabled in firmware for reliable industrial deployments.
This page synthesizes Microchip distributor pricing, same-family drop-in alternatives, and practical design notes not found in the standalone datasheet, giving engineers a single source for evaluation, sourcing, and risk mitigation.
Alternativas drop-in para PIC16C67T-10I/PQ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16C67T-10I/PQ (mesmo formato e footprint) — diferindo em Program Memory Size, Package, Program Memory Type, Maximum Clock Frequency, Core.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16C67-10I/PQ
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.3 / unidade
Ver ficha técnica →PIC16C67T-10/PQ
✅ Drop-In✓ Em estoque
$5.75 / unidade
Ver ficha técnica →PIC16C67-20I/PQ
✅ Drop-In✓ Em estoque
$3.62 / unidade
Ver ficha técnica →PIC16C67T-04I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$7.9 / unidade
Ver ficha técnica →PIC16C67-10E/PQ
✅ Drop-In✓ Em estoque
$9.95 / unidade
Ver ficha técnica →PIC16C67T-10I/PQ Classificações máximas e características elétricas
| Core | PIC 8-bit RISC |
| Series | PIC® 16C |
| Program Memory Size | 14 KB (8K x 14) OTP |
| RAM Size | 368 bytes |
| Number of I/O | 33 |
| Frequência máxima de clock | 10 MHz |
| Tensão de alimentação | 5 V |
| Temperatura de operação | -40 °C to +85 °C (Industrial) |
| Encapsulamento | 44-MQFP (10 mm × 10 mm), Gull-Wing |
| Instruction Word Width | 14-bit |
| Program Memory Type | OTP (One-Time Programmable) |
| Tipo de montagem | Surface Mount |
| Temperature Grade | Industrial |
| Status RoHS | Compliant |
| Packaging Form | Tape and Reel (T suffix) |
Configuração de pinos do PIC16C67T-10I/PQ
| Pino 1 | MCLR/VPP — Master Clear (Reset) / Programming voltage |
| Pino 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Pino 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Pino 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| Pino 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / VREF+ |
| Pino 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Pino 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI Slave Select |
| Pino 8 | RE0/RD/AN5 — PORTE bit 0 / Parallel Slave Port Read / Analog input 5 |
| Pino 9 | RE1/WR/AN6 — PORTE bit 1 / Parallel Slave Port Write / Analog input 6 |
| Pino 10 | RE2/CS/AN7 — PORTE bit 2 / Parallel Slave Port Chip Select / Analog input 7 |
| Pino 11 | VDD — Positive supply voltage (5V) |
| Pino 12 | VSS — Ground reference |
| Pino 13 | OSC1/CLKIN — Oscillator crystal input / external clock |
| Pino 14 | OSC2/CLKOUT — Oscillator crystal output / clock output |
| Pino 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Pino 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Pino 17 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Pino 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I²C clock |
| Pino 19 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| Pino 20 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| Pino 21 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| Pino 22 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| Pino 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I²C data |
| Pino 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pino 25 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| Pino 26 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| Pino 27 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| Pino 28 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| Pino 29 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port bit 6 |
| Pino 30 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port bit 7 |
| Pino 31 | VSS — Ground reference |
| Pino 32 | VDD — Positive supply voltage (5V) |
| Pino 33 | RB0/INT — PORTB bit 0 / External interrupt |
| Pino 34 | RB1 — PORTB bit 1 |
| Pino 35 | RB2 — PORTB bit 2 |
| Pino 36 | RB3/PGM — PORTB bit 3 / Low-voltage programming |
| Pino 37 | RB4 — PORTB bit 4 |
| Pino 38 | RB5 — PORTB bit 5 |
| Pino 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pino 40 | RB7/PGD — PORTB bit 7 / ICSP data |
| Pino 41 | NC — Not connected |
| Pino 42 | NC — Not connected |
| Pino 43 | NC — Not connected |
| Pino 44 | NC — Not connected |
Aplicações típicas
PIC16C67T-10I/PQ é adequado para 6 aplicaçãos: Industrial Control Panels, Automotive Body Controllers, Instrumentation Data Acquisition, Security and Access Control, White Goods and Appliance Controllers, Embedded Sensor Hubs.
Industrial Control Panels
The PIC16C67T-10I/PQ suits industrial control panels where its 33 digital I/O directly drive relays, solenoids, and segmented LED displays without buffering, while the 10-bit ADC reads 4-20 mA sensor signals through current-sense resistors. Its 14KB OTP memory holds ladder-logic replacement firmware, and the industrial -40 to +85 °C temperature grade tolerates cabinet environments. Compared with newer PIC18F parts, the OTP memory prevents field tampering with production firmware, supporting IP protection for OEM equipment. The 10 MHz core executes PID loops within 200 ns cycle times, sufficient for multi-axis motion control at moderate bandwidths.
Recomendado
Automotive Body Controllers
The PIC16C67T-10I/PQ is well-suited to non-safety automotive body electronics such as window lifters, mirror adjusters, and lighting controllers where its 33 I/O pins drive H-bridges and MOSFET drivers directly. The 10 MHz core handles LIN-style protocol stacks and PWM lighting dimming via the CCP module, while the 10-bit ADC reads battery voltage and current sensors. Compared with newer automotive-grade MCUs, the OTP memory prevents end-user code extraction, which is helpful for OEM proprietary algorithms. The 5V supply is compatible with conventional 12V battery systems after regulation. Industrial temperature grade covers most cabin environments.
Recomendado
Instrumentation Data Acquisition
The PIC16C67T-10I/PQ fits instrumentation data acquisition front-ends where its 10-bit ADC and USART channel digitized sensor data to a host PC. The 14KB OTP memory holds calibration tables and signal-processing routines for thermocouples, strain gauges, or load cells, while the 368-byte RAM is sufficient for moving-window averaging. The 33 I/O expand easily to multiplexed displays, keypads, and status LEDs. Compared with newer PIC18F or dsPIC33 parts, the PIC16C67 trades flash reprogrammability for lower cost and IP security through OTP memory - beneficial for sealed industrial instruments. Industrial temperature grade supports factory-floor deployment.
Recomendado
Security and Access Control
The PIC16C67T-10I/PQ is widely used in security panels and access controllers where its OTP memory holds proprietary encryption keys and access codes without the possibility of in-the-field extraction. The 33 I/O drives keypads, card readers, door strikes, and sirens, while the 10-bit ADC reads analog sensors. The 10 MHz core handles 26-bit Wiegand reader protocols and 4-bit keypad scanning simultaneously. Compared with flash MCUs, OTP prevents firmware copying, supporting IP protection for security OEMs. The industrial temperature grade supports outdoor enclosures.
Recomendado
White Goods and Appliance Controllers
The PIC16C67T-10I/PQ powers washing machines, dishwashers, and microwave oven controllers where its OTP memory holds proprietary cycle algorithms, motor timing tables, and user interface state machines. The 33 I/O directly drives triac interfaces for AC loads, LED displays, and rotary encoder inputs. The 10-bit ADC monitors motor current and temperature sensors for safety interlocks. Compared with newer PIC18F parts, the OTP memory prevents end-user firmware tampering, a regulatory concern for some appliance safety standards. Industrial temperature grade handles appliance environments near heating elements.
Recomendado
Embedded Sensor Hubs
The PIC16C67T-10I/PQ serves as a low-cost sensor hub aggregating data from SPI/I²C sensors and forwarding over USART to a host processor. Its 33 I/O provide ample headroom for sensor selection lines and status LEDs, while the 10-bit ADC handles additional analog sensors. The 14KB OTP memory holds sensor calibration constants and protocol handlers for SPI, I²C, and UART interfaces. Compared with newer Cortex-M0 parts, the PIC16C67 offers deterministic interrupt response critical for time-sensitive sensor sampling, an advantage in industrial sensor hubs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16C67T-10I/PQ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16C67-10I/PQ | PIC16C67T-10/PQ | PIC16C67-20I/PQ | PIC16C67T-04I/PT | PIC16C67-10E/PQ |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-MQFP (10x10) | 44-MQFP (10x10) - same | 44-MQFP (10x10) - same | 44-MQFP (10x10) - same | 44-TQFP - same pinout, smaller body | 44-MQFP (10x10) - same |
| Program Memory | 14KB OTP | 14KB OTP | 14KB OTP | 14KB OTP | 14KB OTP | 14KB OTP |
| Maximum Clock Frequency | 10 MHz | 10 MHz | 10 MHz | 20 MHz | 4 MHz | 10 MHz |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Operating Temperature | -40 to +85 °C (Industrial) | -40 to +85 °C | 0 to +70 °C (Commercial) | -40 to +85 °C | -40 to +85 °C | -40 to +125 °C (Extended) |
| Packaging Form | Tape and Reel | Tray | Tape and Reel | Tray | Tape and Reel | Tray |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Principais diferenciais
- OTP memory prevents firmware tampering (vs PIC16F877A-I/PQ)
- Industrial temperature range with OTP reliability (vs PIC16C67T-10/PQ)
- Tape and reel packaging for high-volume assembly (vs PIC16C67-10I/PQ)
Notas de projeto
Estimated: The PIC16C67T-10I/PQ typical active current is approximately 13-16 mA at 5V/10 MHz, plus I/O current. With all 33 I/O sourcing 10 mA each, total supply current can reach 350 mA. Ensure the 5V regulator can supply at least 400 mA and use a 100 nF decoupling capacitor within 25 mm of each VDD pin (pins 11 and 32). For battery-powered designs, enable sleep mode and use the watchdog timer for periodic wake-up.
The 44-MQFP package has 0.8 mm pitch gull-wing leads. Solder pad length should be 2.0 mm with a stencil aperture of 0.3 mm × 1.5 mm for reliable paste deposition. Place a 4-layer PCB with continuous ground plane beneath the device to reduce EMI from the internal oscillator. The MCLR pin (pin 1) requires a 10 kΩ pull-up to VDD; if not used, leave it connected to VDD through the resistor.
OTP memory cannot be erased, so plan firmware carefully before programming. Verify the configuration bits (oscillator type, watchdog enable, brown-out voltage, code protection) BEFORE burning the part. For prototype development, use the PIC16F877A which is flash-based and ICSP-programmable. The 14-bit configuration word (地址 2007h) controls oscillator, WDT, BOD, and code protection - a misconfigured word can render the device unusable if code protection is locked without verification.
Estimated: The 44-MQFP package has θJA of approximately 50 °C/W. At 10 mA per I/O × 33 outputs × 0.4 V VOH drop = 132 mW total internal dissipation plus 80 mW core, total ~210 mW yields junction rise of 10 °C above ambient. Industrial temperature grade permits operation up to 85 °C ambient with conservative 35 °C junction rise margin. Adequate for sealed industrial enclosures; for >50 °C ambient, derate I/O drive strength in firmware.
Informações de conformidade
RoHS compliant per Microchip product declaration and distributor listings. Lead-free and REACH compliant. Not AEC-Q100 qualified; the PIC16C67 family was designed for industrial/commercial use and was never automotive-qualified. For automotive applications requiring AEC-Q100, consider PIC18F equivalents or external qualification testing.
