PIC16C924-08/L - 8-Bit MCU w/ LCD Driver, 7KB OTP, 68-PLCC | Microchip
N.º da peça: PIC16C924-08/L ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.95 | $1.395,00 |
| 500 | $12.1 | $6.050,00 |
| 1.000 | $10.45 | $10.450,00 |
PIC16C924-08/L Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and configurable I/O peripherals. The PIC16C924 sits in Microchip's PIC16 mid-range family, an 8-bit RISC architecture known for its small instruction set (only 35 single-word instructions) and deterministic timing. Adding an on-chip LCD driver makes this part a category-defining solution for embedded human-machine interfaces, eliminating the need for an external LCD controller chip and reducing BOM cost and PCB area.
Key features include five channels of 8-bit Analog-to-Digital conversion (ADC), a Synchronous Serial Port configurable as either 3-wire SPI or 2-wire I2C, an integrated LCD driver capable of driving 32 segments with 4 commons (up to 128 pixel control), and capture/compare/PWM peripherals. The CMOS process provides low power consumption and high noise immunity, while the 14-bit instruction word delivers compact code density. The OTP program memory is one-time-programmable, suiting production runs where firmware is finalized and cost per unit is critical.
Typical applications include industrial control panels, point-of-sale terminals, medical instrumentation with graphical readouts, automotive dashboard clusters, appliance user interfaces, and metering equipment. The 52 I/O pins and 8-bit ADC simplify sensor aggregation, while the integrated LCD driver removes the need for an external controller.
When designing with the PIC16C924, ensure that OTP programming is performed before final assembly (windowless PLCC cannot be UV-erased). Confirm timing budgets against the 8 MHz oscillator and the 500 ns instruction cycle, and verify the LCD bias and contrast network against the panel datasheet.
This page synthesizes distributor pricing, drop-in alternatives in the same 68-PLCC footprint, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para PIC16C924-08/L — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16C924-08/L (mesmo formato e footprint) — diferindo em LCD Driver, Package, Operating Temperature, Timers, Mounting Type.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16C924-04I/L
✅ Drop-In✓ Em estoque
$2.85 / unidade
Ver ficha técnica →PIC16C924/CL
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$14.2 / unidade
Ver ficha técnica →PIC16C923-08I/L
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.75 / unidade
Ver ficha técnica →PIC16C923T-08I/L
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.4 / unidade
Ver ficha técnica →PIC16C923-04I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$8.2 / unidade
Ver ficha técnica →PIC16C924-08/L Classificações máximas e características elétricas
| Core Architecture | PIC 8-bit RISC (mid-range) |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 7 KB (4K x 14) |
| RAM | 176 bytes |
| Frequência máxima de clock | 8 MHz |
| Instruction Cycle | 500 ns |
| ADC | 5 channels x 8-bit |
| I/O Pins | 52 |
| LCD Driver | 32 segments x 4 commons (128 pixels) |
| Serial Interface | SSP - SPI / I2C |
| Encapsulamento | 68-PLCC (24.23 x 24.23 mm) windowless |
| Tipo de montagem | Surface Mount (J-Lead) |
| Instruction Set | 35 single-word instructions |
Configuração de pinos do PIC16C924-08/L
| Pino 1 | MCLR/Vpp — Master Clear reset (active low) / programming voltage input |
| Pino 2 | OSC1/CLKIN — Oscillator crystal input / external clock input |
| Pino 3 | OSC2/CLKOUT — Oscillator crystal output / clock output |
| Pino 4 | RA0/AN0 — Port A bit 0 / analog input 0 |
| Pino 5 | RA1/AN1 — Port A bit 1 / analog input 1 |
| Pino 6 | RA2/AN2 — Port A bit 2 / analog input 2 |
| Pino 7 | RA3/AN3/Vref — Port A bit 3 / analog input 3 / ADC reference |
| Pino 8 | RA4/T0CKI — Port A bit 4 / Timer 0 clock input |
| Pino 9 | RA5/AN4/SS — Port A bit 5 / analog input 4 / SPI slave select |
| Pino 10 | Vss — Ground reference |
| Pino 11 | VDD — Positive supply voltage |
| Pino 12 | RB0/INT — Port B bit 0 / external interrupt |
| Pino 13 | RB1 — Port B bit 1 |
| Pino 14 | RB2 — Port B bit 2 |
| Pino 15 | RB3 — Port B bit 3 |
| Pino 16 | RB4 — Port B bit 4 |
| Pino 17 | RB5 — Port B bit 5 |
| Pino 18 | RB6/PGC — Port B bit 6 / ICSP clock |
| Pino 19 | RB7/PGD — Port B bit 7 / ICSP data |
| Pino 20 | RC0 — Port C bit 0 |
| Pino 21 | RC1 — Port C bit 1 |
| Pino 22 | RC2 — Port C bit 2 |
| Pino 23 | RC3/SCL/SCK — Port C bit 3 / I2C clock / SPI clock |
| Pino 24 | RC4/SDA/SDI — Port C bit 4 / I2C data / SPI data in |
| Pino 25 | RC5/SDO — Port C bit 5 / SPI data out |
| Pino 26 | RC6 — Port C bit 6 |
| Pino 27 | RC7 — Port C bit 7 |
| Pino 28 | RD0 — Port D bit 0 |
| Pino 29 | RD1 — Port D bit 1 |
| Pino 30 | RD2 — Port D bit 2 |
| Pino 31 | RD3 — Port D bit 3 |
| Pino 32 | RD4 — Port D bit 4 |
| Pino 33 | RD5 — Port D bit 5 |
| Pino 34 | RD6 — Port D bit 6 |
| Pino 35 | RD7 — Port D bit 7 |
| Pino 36 | RE0/RD — Port E bit 0 / LCD register select |
| Pino 37 | RE1/WR — Port E bit 1 / LCD write strobe |
| Pino 38 | RE2/CS — Port E bit 2 / LCD chip select |
| Pino 39 | SEG0 — LCD segment output 0 |
| Pino 40 | SEG1 — LCD segment output 1 |
| Pino 41 | SEG2 — LCD segment output 2 |
| Pino 42 | SEG3 — LCD segment output 3 |
| Pino 43 | SEG4 — LCD segment output 4 |
| Pino 44 | SEG5 — LCD segment output 5 |
| Pino 45 | SEG6 — LCD segment output 6 |
| Pino 46 | SEG7 — LCD segment output 7 |
| Pino 47 | SEG8 — LCD segment output 8 |
| Pino 48 | SEG9 — LCD segment output 9 |
| Pino 49 | SEG10 — LCD segment output 10 |
| Pino 50 | SEG11 — LCD segment output 11 |
| Pino 51 | SEG12 — LCD segment output 12 |
| Pino 52 | SEG13 — LCD segment output 13 |
| Pino 53 | SEG14 — LCD segment output 14 |
| Pino 54 | SEG15 — LCD segment output 15 |
| Pino 55 | SEG16 — LCD segment output 16 |
| Pino 56 | SEG17 — LCD segment output 17 |
| Pino 57 | SEG18 — LCD segment output 18 |
| Pino 58 | SEG19 — LCD segment output 19 |
| Pino 59 | SEG20 — LCD segment output 20 |
| Pino 60 | SEG21 — LCD segment output 21 |
| Pino 61 | SEG22 — LCD segment output 22 |
| Pino 62 | SEG23 — LCD segment output 23 |
| Pino 63 | SEG24 — LCD segment output 24 |
| Pino 64 | SEG25 — LCD segment output 25 |
| Pino 65 | SEG26/SEG28 — LCD segment output 26/28 (alternating) |
| Pino 66 | SEG27/SEG31 — LCD segment output 27/31 (alternating) |
| Pino 67 | COM0 — LCD common output 0 |
| Pino 68 | COM1 — LCD common output 1 |
Aplicações típicas
PIC16C924-08/L é adequado para 6 aplicaçãos: Industrial Control Panels with LCD Readout, Point-of-Sale Terminals and Cash Registers, Medical Instrumentation Displays, Appliance User Interfaces, Automotive Dashboard Clusters (Legacy), Metering and Measurement Equipment.
Industrial Control Panels with LCD Readout
The PIC16C924-08/L is purpose-built for industrial control panels that combine push-button inputs with character or segment LCD readouts. Its integrated 32-segment x 4-common LCD driver eliminates the need for an external LCD controller, reducing PCB area and BOM cost by typically $0.50-$1.00 per unit. The 52 I/O pins support matrix keypads, LED indicators, relay drivers, and sensor inputs; the 5-channel 8-bit ADC handles analog monitoring such as temperature, pressure, or 4-20 mA loop sensing. At 8 MHz with 500 ns instruction cycles, the MCU comfortably handles real-time control loops and LCD refresh without CPU overload. The OTP memory suits high-volume OEM panels where firmware is finalized.
Recomendado
Point-of-Sale Terminals and Cash Registers
POS terminals and cash registers benefit from the PIC16C924-08/L's combination of LCD driver, generous I/O count, and serial communication. The integrated LCD interface drives customer-facing alphanumeric displays without a dedicated controller IC, while the 52 I/Os handle keypad scanning, printer handshake lines, drawer-kick solenoids, and magnetic-stripe-reader interfaces. The SSP peripheral supports either SPI for external peripherals or I2C for EEPROM storage of transaction logs. With 7 KB OTP and 176 bytes RAM, the part fits typical firmware for price lookup, totaling, and receipt formatting in standalone or networked POS designs.
Recomendado
Medical Instrumentation Displays
Medical devices such as infusion pumps, blood-pressure monitors, and portable diagnostics require clear, low-power LCD readouts combined with sensor acquisition. The PIC16C924-08/L delivers both with its on-chip 5-channel 8-bit ADC for pressure, flow, or temperature sensors, and its 32-segment LCD driver for direct glass-panel connection. The 8 MHz speed and 35-instruction RISC core keep firmware development fast and code compact for IEC 62304-style medical firmware. Industrial temperature range supports clinical and field-use environments. Verify the OTP programming workflow with your quality system before production.
Recomendado
Appliance User Interfaces
White goods, HVAC thermostats, and small kitchen appliances use the PIC16C924-08/L to consolidate user-interface, sensor acquisition, and load control on a single chip. The 52 I/Os drive relay triac controls for compressors, heaters, and valves while simultaneously scanning touch keys and refreshing LCD segment displays. The CMOS process keeps quiescent current low for standby modes required by energy-star regulations. Integrated LCD bias generation simplifies the BOM and reduces PCB complexity versus designs that need an external LCD controller with charge pumps.
Recomendado
Automotive Dashboard Clusters (Legacy)
Although the PIC16C924-08/L is not AEC-Q100 qualified, it has been used historically in aftermarket and pre-OEM automotive dashboard clusters, motorcycle instrument panels, and marine gauges. Its integrated LCD driver directly connects to glass displays for odometers, fuel, RPM, and warning icons, while the ADC reads analog sensor inputs. For new automotive designs, choose AEC-Q100-qualified PIC microcontrollers instead; for legacy repair and aftermarket applications, the PIC16C924 remains available through distributor stock and brokers.
Recomendado
Metering and Measurement Equipment
Electricity meters, water meters, and gas meters use the PIC16C924-08/L's combination of ADC, LCD driver, and low-power CMOS design to deliver long-battery-life metering with clear consumption readouts. The 5-channel ADC supports voltage, current, and temperature sensing, while the LCD driver displays consumption, tariffs, and diagnostic codes. The PIC16 mid-range core's deterministic timing simplifies calibration routines. For new metering designs, evaluate flash-based successors with extended temperature range and updated security peripherals.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16C924-08/L — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16C924-04I/L | PIC16C924/CL | PIC16C923-08I/L | PIC16C923T-08I/L | PIC16C923-04I/PT |
|---|---|---|---|---|---|---|
| Package | 68-PLCC (J-Lead) | 68-PLCC (J-Lead) - same | 68-PLCC (J-Lead) - same | 68-PLCC (J-Lead) - same | 68-PLCC (J-Lead) - same | 68-PLCC (J-Lead) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 8 MHz | 4 MHz | 8 MHz | 8 MHz | 8 MHz | 4 MHz |
| Program Memory | 7 KB OTP (4K x 14) | 7 KB OTP (4K x 14) | 7 KB OTP (4K x 14) | 7 KB OTP (4K x 14) | 7 KB OTP (4K x 14) | 7 KB OTP (4K x 14) |
| RAM | 176 bytes | 176 bytes | 176 bytes | 176 bytes | 176 bytes | 176 bytes |
| ADC Channels | 5 x 8-bit | 5 x 8-bit | 5 x 8-bit | None (no ADC module) | None (no ADC module) | None (no ADC module) |
| LCD Driver | 32 seg x 4 com (128 px) | 32 seg x 4 com (128 px) | 32 seg x 4 com (128 px) | 32 seg x 4 com (128 px) | 32 seg x 4 com (128 px) | 32 seg x 4 com (128 px) |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial | Industrial | Industrial |
Principais diferenciais
- Integrated 32-segment x 4-common LCD driver (vs PIC16C77-10I/P)
- 5-channel 8-bit ADC on-chip (vs PIC16C923-08I/L)
- 68-pin PLCC with 52 digital I/Os (vs PIC16F877A-I/P)
Notas de projeto
The "/L" suffix on PIC16C924-08/L denotes a windowless PLCC package - the OTP program memory cannot be UV-erased after programming. Plan production-line programming workflow carefully: OTP blanks must be programmed once before final assembly, and any firmware revision requires new unprogrammed parts. For development, use the windowed ceramic ("/JW") variant on engineering benches.
The integrated LCD driver outputs directly to glass-panel segment and common pins. Place the MCU as close to the LCD connector as possible to minimize track capacitance, and route segment traces with adequate spacing (typically >= 0.2 mm) to prevent cross-talk. The bias network (resistor ladder or capacitor charge pump) must match the LCD panel's recommended MUX ratio and bias level - confirm against the panel datasheet before finalizing the BOM.
The PIC16C924 CMOS core draws modest current at 8 MHz (typically < 10 mA active). Decouple VDD with a 100 nF ceramic close to the package plus a bulk 10 uF tantalum or ceramic. For battery-backed designs (metering, portable medical), leverage the PIC mid-range's sleep mode and the LCD driver's ability to refresh the display while the CPU is idle - typical standby currents drop below 10 uA with proper configuration.
Informações de conformidade
RoHS, REACH, lead-free, and halogen-free status not explicitly stated in the verified distributor data; request certificates from the manufacturer. Part is not AEC-Q100 qualified - not suitable for new automotive designs. Lifecycle status: obsolete.
