Microchip Technology

PIC16F1578-I/P - 32MHz 16-Bit PWM 8-Bit MCU | Microchip

N.º da peça: PIC16F1578-I/P ✓ Ativo
20-pin PDIP Package 32 MHz Speed 7 KB Memory
MOQ: 1 |

PIC16F1578-I/P Visão geral

The Microchip Technology PIC16F1578-I/P is an 8-bit PIC microcontroller with a 32 MHz maximum clock, 7 KB of flash program memory organized as 4K × 14 words, 512 bytes of RAM, four independent 16-bit PWM modules, and a 10-bit analog-to-digital converter. The device is offered in a 20-pin PDIP package for through-hole PCB assembly and includes the extended-temperature grade indicated by the “I” suffix.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. PIC microcontrollers belong to the embedded-control hierarchy and are commonly used to monitor inputs, execute control algorithms, and drive outputs in equipment that requires deterministic real-time behavior. The PIC16F1578 specifically combines digital control with high-resolution PWM and analog conversion capabilities.

The four 16-bit PWMs provide greater timing resolution than conventional 8-bit PWM channels, making the PIC16F1578 suitable for applications where precise duty-cycle control is valuable. Microchip identifies high-resolution LED lighting as a representative application for the PIC16(L)F157X family. The 10-bit ADC also allows analog quantities to be digitized for thresholding, measurement, and closed-loop control tasks.

Program storage consists of 7 KB of flash memory, providing 4K × 14 words for firmware, while 512 bytes of RAM support working variables and data processing. Operating at up to 32 MHz gives designers additional timing headroom for combinations of control logic, peripheral activity, and communication tasks. The 20-pin PDIP format provides a generous pin count for through-hole designs while avoiding the specialized tooling associated with fine-pitch surface-mount packages.

Typical applications include high-resolution LED dimming, motor and actuator control, industrial equipment, analog monitoring, and compact embedded controllers. In an LED-lighting design, one PWM output can regulate brightness while the ADC monitors a sensor or current signal. In a motor-control design, PWM can command a driver while digital I/O handles limit switches, interlocks, and status indicators.

PCB design should preserve the manufacturer’s pin and grounding requirements, provide suitable decoupling near the supply pins, and route high-current PWM outputs away from sensitive analog inputs. Because the target uses a through-hole PDIP package, component spacing is generous, but the firmware, oscillator configuration, I/O direction, and peripheral assignments must still match the device’s exact pin allocation and clock requirements.

This product record combines the confirmed manufacturer and distributor specifications with engineering-focused guidance for PWM resolution, analog conversion, PCB implementation, component sourcing, and design validation. It also distinguishes confirmed characteristics from parameters that require consultation of the manufacturer datasheet before schematic release or production use.

Alternativas drop-in para PIC16F1578-I/P — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com PIC16F1578-I/P (mesmo formato e footprint) — diferindo em Mounting Type, Number of PWM Channels, Package, RoHS Status.

Microchip Technology
Mounting Type: Through-Hole (DIP)
Number of PWM Channels: 4 x 16-bit
Package: 20-pin PDIP (0.300" / 7.62 mm pitch)

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

PIC16F1578-I/P Classificações máximas e características elétricas

Microcontroller Type 8-bit PIC microcontroller
Maximum CPU Frequency 32 MHz
Flash Program Memory 7 KB
Program Memory Organization 4K × 14 words
Data RAM 512 bytes
PWM Resolution 16-bit
Number of PWM Channels 4
ADC Resolution 10-bit
Encapsulamento 20-pin PDIP
Tipo de montagem Through-hole
Temperature Grade Extended industrial grade
Timers Independent timers supporting four 16-bit PWM modules
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Guia de Configuração de Pinos do PIC16F1578-I/P 20-pin pdip

Configuração de pinos para PIC16F1578-I/P (pacote 20-pin pdip). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 20-pin pdip para PIC16F1578-I/P

Nenhum dado detalhado de pinagem disponível para PIC16F1578-I/P.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PIC16F1578-I/P é adequado para 6 aplicaçãos: High-Resolution LED Lighting, Motor and Actuator Control, Industrial Sensor Interface, Analog Monitoring and Control, Compact Embedded Control Panel, Timing and Sequence Controller.

💡

High-Resolution LED Lighting

The PIC16F1578-I/P fits LED-lighting control because Microchip identifies this application for the PIC16(L)F157X family, which combines four independent 16-bit PWM modules with analog peripherals. A controller can map one PWM channel to a dimming stage and use the 10-bit ADC to monitor a light sensor, potentiometer, or current-feedback signal. The 16-bit PWM format provides finer duty-cycle increments than an 8-bit channel, which can improve apparent dimming granularity and reduce command quantization. Its 32 MHz maximum clock provides additional execution headroom for filtering, closed-loop light adjustment, fault monitoring, and user-interface logic. The 20-pin PDIP package also supports through-hole assembly where adequate board spacing is available.

🏭

Motor and Actuator Control

The PIC16F1578-I/P can coordinate PWM-based motor or actuator commands because it provides four independent 16-bit PWM modules and operates up to 32 MHz. Separate PWM channels may represent different actuator duties, while digital inputs monitor limit switches, interlocks, or position sensors and the 10-bit ADC can sample analog feedback. The MCU is the command and sequencing element rather than the power stage, so an appropriate transistor, gate-driver, or motor-driver interface remains necessary. Firmware should include startup limits, watchdog recovery, and a defined safe output state. The PDIP format makes the controller convenient to prototype or hand solder, but current ratings, grounding, and high-current return paths must be planned independently.

🏭

Industrial Sensor Interface

The PIC16F1578-I/P is appropriate for compact industrial sensor-interfaces that need both analog measurement and precise timing. Its 10-bit ADC can digitize a conditioned sensor signal, while the four 16-bit PWM channels can generate excitation, scanning, or actuator-control waveforms. At up to 32 MHz, the device can filter samples, apply thresholds, record operating states, and manage communication or output updates. The 512-byte RAM and 7 KB of flash provide defined resources for a focused control program, although actual code and data usage must be checked with the final compiler and libraries. Because this is an extended industrial-grade option, the complete operating-temperature and electrical specifications should be confirmed in the datasheet before deployment in temperature-extreme equipment.

🔧

Analog Monitoring and Control

The PIC16F1578-I/P can serve as the central device in analog monitoring systems because it combines a 10-bit ADC with an 8-bit CPU running up to 32 MHz. A typical signal chain would condition a sensor into the MCU’s analog-input range, digitize it with the ADC, apply filtering or threshold logic, and then use PWM or digital outputs to indicate status or control a downstream stage. The independent timer resources associated with four 16-bit PWM modules can help maintain stable timing relationships in sampled-control systems. Designers should verify the ADC input count, acquisition time, reference voltage, and selectable pin functions in the manufacturer pinout because those details are not included in the product-page excerpt.

🧩

Compact Embedded Control Panel

The PIC16F1578-I/P is suitable for a compact embedded control panel that combines digital inputs, status indication, analog adjustment, and timed outputs. Its 20-pin PDIP package provides a practical through-hole interface for a hand-assembled prototype or industrial board with moderate connector density. The four 16-bit PWM outputs can drive indicators, small actuators, or warning signals, while the 10-bit ADC can accept a potentiometer or analog sensor through appropriate conditioning. With 7 KB of program flash and 512 bytes of RAM, firmware must remain focused and should reserve space for communication routines, interrupt handling, and diagnostics. Validate actual pin multiplexing in the 20-pin PDIP allocation table before finalizing the connector and control-panel schematic.

🔧

Timing and Sequence Controller

The PIC16F1578-I/P can be used when a design depends on repeatable timing, ordered output transitions, and mixed analog supervision. Four independent 16-bit PWM modules provide separate timing outputs, reducing the need to multiplex one timer across multiple unrelated functions. The CPU can coordinate those outputs with digital interlocks, sequence counters, and ADC measurements, while the 32 MHz clock rate supports additional control calculations. This pattern is useful for laboratory equipment, production fixtures, and compact automation modules where a deterministic state machine is required. The design should include defined shutdown behavior for every actuator output, watchdog handling for stalled firmware, and careful separation of power-ground and signal-return paths to prevent switching activity from disturbing analog measurements.

What are the key specifications of PIC16F1578-I/P that engineers should know?
The PIC16F1578-I/P is an 8-bit microcontroller operating up to 32 MHz with 7 KB of flash memory, 512 bytes of RAM, four 16-bit PWM channels, a 10-bit ADC, and a 20-pin PDIP package. According to the Microchip product page, the PIC16(L)F157X family combines high-resolution PWM and analog functions for precision embedded-control applications such as LED lighting.
What is the operating voltage of PIC16F1578-I/P?
The operating-voltage range is not stated on the manufacturer product page excerpt, so it must be confirmed in the PIC16F1578 datasheet before power-supply design. The confirmed information is that the PIC16F1578-I/P is an 8-bit MCU with a maximum clock of 32 MHz, 7 KB of flash memory, 512 bytes of RAM, and a 20-pin PDIP package. Check the electrical-characteristics and absolute-maximum-rating tables for operating and absolute-maximum conditions.
How much flash memory and RAM does PIC16F1578-I/P have?
The PIC16F1578-I/P provides 7 KB of flash program memory organized as 4K × 14 words and 512 bytes of data RAM. These figures are confirmed by the Microchip product page and the DigiKey product listing. They establish the firmware and working-memory budget, but the final application must also account for bootloader space, configuration words, interrupt vectors, libraries, and runtime stack requirements.
What is the PWM capability of PIC16F1578-I/P?
The PIC16F1578-I/P contains four independent 16-bit PWM modules with independent timers. According to Microchip, the high-resolution PWM architecture is intended for applications requiring precise timing, including LED lighting. The increased period and duty-cycle resolution can reduce quantization error compared with an 8-bit PWM implementation when the system requires smooth output steps or accurate duty-cycle control.
What ADC resolution is available on PIC16F1578-I/P?
The PIC16F1578-I/P includes a 10-bit ADC for analog measurements and control functions. The confirmed Mouser listing identifies the device as a PIC 8-bit MCU with 10-bit ADC, while the Microchip page describes analog support across the PIC16(L)F157X family. The number of available ADC channels, acquisition timing, and reference configuration should be confirmed from the pinout and ADC sections of the manufacturer datasheet.
Where can I download the PIC16F1578-I/P datasheet PDF?
The official PIC16F1578 datasheet is reached through the Microchip PIC16F1578 product page at https://www.microchip.com/en-us/product/PIC16F1578. Select the datasheet or documentation link on that page to obtain the manufacturer PDF. Use the document navigation to locate the 20-pin PDIP pinout, electrical characteristics, ADC, timer, PWM, clock, and programming information required for the design.
Where can I find the PIC16F1578-I/P pinout?
The PIC16F1578-I/P pinout is documented in the manufacturer’s PIC16F1578 datasheet under the 20-pin PDIP pin-configuration and pin-function tables. The confirmed package is a 20-pin PDIP, but individual signal names, power pins, analog inputs, PWM connections, and programming pins are not printed in the product-page excerpt. Use the package drawing and pin-description table before assigning PCB nets or programming peripheral mappings.
Is PIC16F1578-I/P suitable for LED lighting control?
Yes, the PIC16F1578-I/P is suitable for high-resolution LED-lighting control. Microchip specifically identifies LED lighting as an application for the PIC16(L)F157X family because four independent 16-bit PWM modules support precise output-duty-cycle adjustment. A practical implementation can use PWM for brightness, the 10-bit ADC for analog feedback, and digital I/O for switches, indicators, and fault handling.
Can PIC16F1578-I/P be used for motor and actuator control?
The PIC16F1578-I/P can serve as the controller in motor and actuator systems that require precise PWM generation alongside digital monitoring. Its four independent 16-bit PWM channels allow separate commands for multiple actuators, while the 32 MHz processing headroom supports control logic and peripheral activity. The external power stage, current sensing, protection, and timing must be designed independently of the MCU.
Where can I buy PIC16F1578-I/P online?
Use the Request a Quote form on this page to request PIC16F1578-I/P availability, current commercial terms, and the correct 20-pin PDIP packaging configuration. The form lets the quote request identify the exact ordered MPN and avoids ambiguity with other package or temperature-grade variants. Confirm lifecycle status, lead time, minimum order quantity, and authorized-channel conditions before committing a production schedule.
What is the price of PIC16F1578-I/P?
The current commercial price should be requested through the Request a Quote form on this page. Pricing can vary with quantity, inventory position, packaging, and market conditions, so a static figure may not reflect the quantity required by the buyer. Include the desired order quantities and target delivery schedule with the request to obtain an actionable quotation for the exact PIC16F1578-I/P MPN.
Is PIC16F1578-I/P in stock and what is its lead time?
Current inventory and lead time for PIC16F1578-I/P should be confirmed through the Request a Quote form on this page. The exact MPN is an industrial-temperature, 20-pin PDIP device, so the quote should preserve both the “-I/P” suffix and the required order quantity. Production planning should also allow time for firmware qualification, PCB assembly, and incoming inspection before treating an available quantity as deployable stock.
What is the best drop-in replacement for PIC16F1578-I/P?
A drop-in replacement should not be selected until its 20-pin PDIP pinout, clock architecture, memory size, peripheral mapping, and electrical limits are verified against the PIC16F1578-I/P. The cross-reference search did not identify a confirmed substitute that can be represented as a true drop-in without additional device-level confirmation. For an existing PCB, request a controlled substitution review and compare the manufacturer datasheets before approving any alternate MPN.
Is there a Microchip equivalent for PIC16F1578-I/P with a different package?
PIC16F1578 variants with different packages can differ in exposed I/O, power pins, peripheral availability, and PCB layout, so they are not drop-in replacements for the 20-pin PDIP target. The family shares the PIC16F1578 base identifier, but the suffix determines package, temperature grade, and shipping configuration. Select a replacement only after checking the exact pin allocation and PCB footprint in the manufacturer documentation.
PIC16F1578-I/P vs PIC16F1578-I/SO - which is better for a new design?
PIC16F1578-I/P is preferable for a new through-hole PCB because it uses the confirmed 20-pin PDIP package; PIC16F1578-I/SO is a different package variant and therefore requires a different footprint and layout. The core MCU family may provide similar functional capability, but I/O availability, pin multiplexing, board area, assembly method, and thermal performance must be checked separately. Use the exact suffix required by the mechanical design.

Dados de referência de engenharia para PIC16F1578-I/P — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose PIC16F1578-I/P when the design specifically requires a through-hole 20-pin PDIP footprint, an 8-bit PIC controller, four independent 16-bit PWM channels, a 10-bit ADC, and operation up to 32 MHz. It is especially relevant for high-resolution LED control, compact analog-monitoring products, and industrial modules where through-hole assembly simplifies prototyping or maintenance. The same family may be available in other package suffixes, but those versions are not automatic drop-in replacements because their footprints, I/O access, and pin assignments can differ. No confirmed drop-in alternative was identified, so engineers should evaluate the original MPN against other Microchip family members using the exact peripheral, memory, timing, and package requirements rather than relying only on the base device name.

Notas de projeto

Assign the schematic and PCB using the manufacturer’s 20-pin PDIP pin-allocation table rather than inferring connections from the generic PIC16 family. Confirm the locations of supply, ground, programming, oscillator, ADC, PWM, and digital I/O pins before routing. Place the decoupling capacitor at the supply pins with a short, low-inductance return path, and keep analog input traces away from PWM and switching-current nodes.

Design the supply network around the voltage and current limits listed in the manufacturer electrical-characteristics table. Decouple the MCU supply locally and provide a clean source for the ADC reference. Because the ADC resolution is 10-bit, reference instability and analog-ground noise can consume meaningful measurement accuracy even when the conversion resolution itself is adequate.

Do not assume that every PWM-capable pin is simultaneously available in the 20-pin PDIP configuration. Peripheral remapping can limit simultaneous PWM, ADC, serial, and general-purpose I/O functions. Review the pin-selection tables, interrupt requirements, and peripheral priority rules before committing all four 16-bit PWM channels, ADC channels, and communications interfaces to the same design.

Use the device’s documented maximum supply voltage, operating-temperature limits, and package power limitations when checking worst-case conditions. The controller’s dissipation and PCB heating depend on the selected clock, duty cycles, and surrounding circuitry. For a through-hole design, provide adequate copper around power pins and avoid placing heat sources directly beneath sensitive analog sections of the board.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer page and distributor excerpts do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the product is an industrial-temperature microcontroller rather than an automotive-qualified component.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

PIC16F1578-I/P datasheet PIC16F1578 datasheet pdf PIC16F1578-I/P pinout PIC16F1578-I/P specifications PIC16F1578 20 pin PDIP PIC16F1578 16 bit PWM PIC16F1578 10 bit ADC PIC16F1578 32 MHz microcontroller PIC16F1578-I/P equivalent PIC16F1578-I/P replacement PIC16F1578-I/P price PIC16F1578-I/P stock Microchip PIC16F1578-I/P PIC16F1578 LED lighting controller

Componentes & termos relacionados

Microchip Technology PIC16F1578-I/P PIC16F1578 PIC16(L)F157X PIC microcontroller 8-bit microcontroller microcontroller embedded controller semiconductor flash program memory data RAM 16-bit PWM four-channel PWM 10-bit ADC 32 MHz 20-pin PDIP industrial temperature grade LED lighting motor control analog monitoring embedded systems high-resolution timing
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ