Microchip Technology

PIC16F1777-I/P - 8-Bit 32MHz MCU with 14KB Flash | Microchip

N.º da peça: PIC16F1777-I/P ✓ Ativo
40-pin PDIP Package 32 MHz Speed 14 KB Flash (8K x 14) Memory
MOQ: 1 |

PIC16F1777-I/P Visão geral

The Microchip Technology PIC16F1777-I/P is an 8-bit PIC microcontroller with a maximum operating frequency of 32 MHz, 14 KB of Flash program memory organized as 8K x 14 words, and 1 KB of RAM. The device is supplied in a 40-pin through-hole PDIP package. Its integrated intelligent analog peripherals target compact control systems requiring conversion, comparison, waveform generation, and precision analog support without relying on separate discrete components.

A PIC microcontroller is an 8-bit RISC-based embedded controller within the broader semiconductor and microcontroller hierarchy. These devices combine program Flash, data RAM, digital I/O, timers, and analog conversion functions on one integrated circuit. The PIC16F1777 family is positioned for lighting, power supply, battery charging, motor control, and general-purpose industrial applications where a compact analog-rich control platform can simplify board design.

Key features include a 10-bit ADC, 5-bit and 10-bit DAC functions, multiple operational amplifiers, high-speed comparators, 10-bit and 16-bit PWM capabilities, and a programmable ramp generator. According to the Microchip PIC16(L)F1777/8/9 data sheet, these analog and timing resources support closed-loop power conversion, current sensing, signal conditioning, and motor-control applications. The -I suffix identifies the industrial temperature grade, while /P denotes the PDIP package configuration.

The 32 MHz maximum clock rate gives designers additional processing headroom for control loops, communication routines, and supervisory logic. Its 8K x 14-word program memory provides approximately 14 KB of Flash storage, while the 1 KB RAM block supports working variables, stack operations, and buffered data. The integrated analog peripherals also reduce the need for external converters and amplifiers in measurement and feedback paths.

Typical implementations include LED lighting controllers, battery-management equipment, power-conversion modules, compact motor controllers, industrial sensor interfaces, and embedded measurement systems. In a power-supply application, the ADC can monitor voltage and current, the comparators can detect thresholds quickly, and the PWM outputs can support feedback loops or power-stage control.

When laying out a board, reserve clean analog routing around the ADC, DAC, comparator, and operational-amplifier pins, and follow the decoupling and grounding recommendations in the manufacturer data sheet. Confirm the required oscillator configuration, programmed operating range, and analog reference arrangement before releasing the PCB layout.

This page consolidates the manufacturer device description, package and memory details, application guidance, drop-in alternatives, and practical design notes to support faster component selection and board bring-up. It also distinguishes verified drop-in options from parts that require firmware, peripheral, or qualification review.

Alternativas drop-in para PIC16F1777-I/P — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com PIC16F1777-I/P (mesmo formato e footprint) — diferindo em Package, ADC, Operating Temperature, Comparators, Core.

Microchip Technology
Package: 40-pin PDIP (P)
ADC: 10-bit, up to 28 channels
Comparators: 2
Microchip Technology
Package: 40-pin PDIP
Microchip Technology
Package: 40-pin PDIP (0.600 inch, 15.24 mm)
Comparators: Yes (high-speed, with DAC reference)
Microchip Technology
Package: 40-pin PDIP (0.600 in, 15.24 mm)
ADC: 10-bit, multiple channels
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
Package: 40-pin PDIP (0.600 in, 15.24 mm)
ADC: 10-bit, 14 channels
Operating Temperature: -40C to +85C (Industrial, -I suffix)
Microchip Technology
Package: 40-pin PDIP (0.600", 15.24 mm)
ADC: 10-bit (multiple channels)
Operating Temperature: -40C to +125C (E = extended)
Microchip Technology
ADC: 10-bit
Operating Temperature: -40 °C to +85 °C (Industrial)
Core: PIC16F enhanced mid-range 8-bit
Microchip Technology
Package: 40-pin PDIP (DIP-40, 0.600 inch)
Operating Temperature: -40 C to +125 C (Extended)
Comparators: 2

PIC16F1777-E/P

✅ Drop-In
Microchip Technology
📦 40-pin PDIP
Enhanced Mid-Range 8-bit PIC · 14 KB (8K x 14 words) · 1 KB · 32 MHz (8 MIPS) · 10-bit (with 12-bit ADC2 with computation) · 2.3 V to 5.5 V (F variant) · -40C to +125C (Extended, -E suffix)

Consulte o preço

Ver ficha técnica →

PIC16F1779-I/P

✅ Drop-In
Microchip Technology
📦 40-pin PDIP
Microchip Technology · PIC16F1779 · PIC16 (8-bit RISC) · 8-Bit · 32 MHz · 28 KB (16K x 14) Flash · 2 KB (2048 bytes) · 0 bytes (none)

Consulte o preço

Ver ficha técnica →

PIC16F1778-I/P

✅ Drop-In
📦 40-pin PDIP
Same 40-pin PIC16F177X package family with 32 MHz-class performance; family-level analog and peripheral differences require pin-function review

📋 Alternativa de referência (fora do catálogo)

PIC16F1717-E/P

✅ Drop-In
Microchip Technology
📦 40-pin PDIP
PIC16F171x (XLP) · 8-bit PIC Enhanced Mid-Range · 14 KB (8K x 14 words) · 1 KB · 256 bytes · 32 MHz · 1.8 V to 5.5 V · -40 C to +125 C

Consulte o preço

Ver ficha técnica →

PIC16F777-I/P

✅ Drop-In
Microchip Technology
📦 40-pin PDIP
PIC16 8-bit RISC (Harvard) · 14 KB Flash (8K x 14 words) · 20 MHz · 200 ns (at 20 MHz) · 35 single-word instructions · 10-bit, 14 channels

Consulte o preço

Ver ficha técnica →

PIC16F1777-I/P Classificações máximas e características elétricas

Manufacturer Microchip Technology
Product Family PIC16(L)F177X
Device Type 8-bit Flash microcontroller
Maximum CPU Frequency 32 MHz
Program Memory 14 KB Flash (8K x 14)
Data RAM 1 KB
ADC Resolution 10-bit
DAC Resolution 5-bit and 10-bit
PWM Resolution 10-bit and 16-bit
Analog Peripherals Multiple operational amplifiers, high-speed comparators, and DACs
Programmable Ramp Generator Yes
Encapsulamento 40-pin PDIP
Tipo de montagem Through-hole
Temperature Grade Industrial (-40°C to +85°C)
Core Architecture 8-bit PIC RISC

Guia de Configuração de Pinos do PIC16F1777-I/P 40-pin pdip

Configuração de pinos para PIC16F1777-I/P (pacote 40-pin pdip). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 40-pin pdip para PIC16F1777-I/P

Nenhum dado detalhado de pinagem disponível para PIC16F1777-I/P.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PIC16F1777-I/P é adequado para 6 aplicaçãos: LED Lighting Control, Battery Charging Control, Compact Power-Supply Controller, Motor Control and Monitoring, Industrial Sensor Interface, General-Purpose Embedded Control.

💡

LED Lighting Control

The PIC16F1777-I/P suits LED lighting modules that need dimming, current feedback, and fault detection in one controller. Its 10-bit ADC can sample a potentiometer, sensor, or current-sense amplifier output, while the 10-bit and 16-bit PWM channels provide adjustable duty cycle for LED drive control. At a maximum clock frequency of 32 MHz, the MCU has processing headroom for debouncing, communications, and lighting-state logic. The multiple comparators and operational amplifiers also support threshold detection and signal conditioning near the LED driver. Place analog input routing away from switching-node traces and follow the decoupling recommendations in the Microchip PIC16(L)F1777/8/9 data sheet.

⚡

Battery Charging Control

The PIC16F1777-I/P fits battery-management controllers that monitor voltage and current while coordinating a charger through PWM-capable outputs. Its 10-bit ADC provides feedback from analog current and voltage sensing networks, and the integrated comparators can implement fast threshold events without continuous software polling. Multiple operational amplifiers support gain conditioning or current-sense amplification, while the 14 KB Flash and 1 KB RAM are sufficient for compact state machines and protection logic. The 32 MHz maximum operating frequency supports responsive control of a switching charger. Validate the accuracy of the analog front end against the device electrical characteristics before production release.

🔌

Compact Power-Supply Controller

The PIC16F1777-I/P is suitable for compact AC-DC or DC-DC power modules requiring closed-loop control, fault monitoring, and flexible timing. The 10-bit ADC can supervise output voltage, input voltage, and current feedback, while the comparators support fast overvoltage, undervoltage, or cycle-by-cycle current-limit detection. PWM outputs can drive a primary switch or coordinate an auxiliary converter, and the programmable ramp generator simplifies soft-start behavior. With 8K x 14 words of Flash and 1 KB of RAM, the device can host control loops without external logic. Keep the analog and power-stage grounds separated according to the manufacturer's layout guidance.

🏭

Motor Control and Monitoring

The PIC16F1777-I/P supports compact motor-drive and monitoring systems where deterministic control and analog feedback are needed in a 40-pin through-hole package. The 10-bit ADC can sample current, position, or temperature sensors, and the high-speed comparators can detect sensor thresholds or fault conditions rapidly. Multiple operational amplifiers may condition current-sense signals, while the PWM outputs generate excitation or drive timing. The 32 MHz maximum clock rate provides margin for supervisory tasks and structured control code. Because external power transistors, current limiting, and thermal protection remain system-level responsibilities, validate the complete drive against the application requirements.

🧩

Industrial Sensor Interface

The PIC16F1777-I/P can serve as the acquisition and conditioning controller for industrial sensor nodes with moderate data rates. Its 10-bit ADC acquires analog sensor signals, while the internal operational amplifiers and comparators can amplify or threshold low-level inputs before digital processing. The 14 KB Flash provides room for calibration tables, filtering routines, and communication protocols, and the 1 KB RAM supports sampled data buffers. A 32 MHz clock supports responsive sampling and sensor fusion without moving every measurement decision to an external processor. Use the comparator outputs for fast thresholds and the ADC for calibrated measurement, while keeping noisy relay and switching traces away from analog inputs.

🔧

General-Purpose Embedded Control

The PIC16F1777-I/P is a practical general-purpose controller for products combining digital I/O, timing, and analog supervision. Its 8-bit architecture and 32 MHz maximum clock rate provide a straightforward platform for button handling, relay sequencing, counter inputs, and system diagnostics. The 14 KB Flash and 1 KB RAM accommodate compact applications, while the ADC and comparators add measurement functions that would otherwise require additional chips. The 40-pin PDIP package simplifies through-hole prototypes, automated assembly, and repair in industrial equipment. Before reusing an existing board, confirm oscillator pins, programming pins, analog functions, and any peripheral-dependent pin assignments against the manufacturer data sheet.

What is the PIC16F1777-I/P?
The PIC16F1777-I/P is a Microchip Technology 8-bit PIC microcontroller with a maximum clock frequency of 32 MHz, 14 KB of Flash program memory, and 1 KB of RAM. It is packaged in a 40-pin PDIP for through-hole industrial designs. According to the Microchip PIC16(L)F1777/8/9 data sheet, the device integrates a 10-bit ADC, multiple operational amplifiers, high-speed comparators, 5-bit and 10-bit DAC functions, and 10-bit and 16-bit PWM capabilities.
What are the key specifications of PIC16F1777-I/P that engineers should know?
The PIC16F1777-I/P combines a 32 MHz maximum CPU frequency, 14 KB of Flash arranged as 8K x 14 words, 1 KB of RAM, and a 10-bit ADC in a 40-pin PDIP package. Its analog resources include multiple operational amplifiers, high-speed comparators, 5-bit and 10-bit DAC functions, 10-bit and 16-bit PWM outputs, and a programmable ramp generator. These resources are documented in the Microchip PIC16(L)F1777/8/9 data sheet.
Where can I download the PIC16F1777-I/P datasheet PDF?
The official PIC16F1777-I/P data sheet is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/40001819B.pdf. It covers the PIC16(L)F1777, PIC16(L)F1778, and PIC16(L)F1779 families, including pin descriptions, electrical characteristics, analog peripherals, timing, and application guidance. Use the manufacturer's pin-description table when assigning board nets to the 40-pin PDIP footprint.
Where can I find the PIC16F1777-I/P pinout?
The PIC16F1777-I/P pinout is published in the pin-description section of the Microchip PIC16(L)F1777/8/9 data sheet. The device uses a 40-pin PDIP arrangement with through-hole row spacing and a top-side pin-1 marker. When assigning nets, use the package drawing and pin-description table together so that power, ground, oscillator, programming, I/O, and analog functions are mapped to the correct physical pins.
What can replace the PIC16F1777-I/P?
PIC16F1777-E/P is the closest drop-in choice because it retains the PIC16F1777 device identity, 40-pin PDIP package, 32 MHz core, and 14 KB Flash configuration while changing the temperature grade designation. Other 40-pin PIC16F-family devices, such as PIC16F1779-I/P and PIC16F1717-E/P, can share the footprint but may differ in RAM, analog resources, or peripheral configuration. Verify pin-level functions and review the firmware before substitution.
Is PIC16F1777-E/P a drop-in replacement for PIC16F1777-I/P?
PIC16F1777-E/P is a drop-in replacement candidate for PIC16F1777-I/P because both use the same 40-pin PDIP package and the same PIC16F1777 base-device configuration. The primary orderable difference is the temperature-grade code, so the -I part is selected for industrial temperature requirements while the -E designation identifies the extended temperature option. Confirm the operating-temperature requirement and current sourcing status before releasing the substitution.
PIC16F1777-I/P vs PIC16F1779-I/P - which is better for my design?
PIC16F1779-I/P is the better choice when the design needs more RAM than the PIC16F1777-I/P provides. Published comparisons identify 2 KB of RAM for the PIC16F1779 versus 1 KB for the PIC16F1777, while both remain 40-pin PDIP devices with 14 KB of program memory and a maximum clock frequency of 32 MHz. Because the family devices can differ in mixed-signal peripheral assignments, compare the complete pin-description tables before treating them as interchangeable.
When should I choose PIC16F1777-I/P instead of PIC16F1717-E/P?
Choose PIC16F1777-I/P when the design benefits from its dedicated analog resources, including multiple operational amplifiers, high-speed comparators, DAC functions, and 10-bit and 16-bit PWM outputs. PIC16F1717-E/P shares the 40-pin PDIP format and 14 KB of Flash, but it is not automatically equivalent in peripheral capability. Select the PIC16F1717 only after confirming that its pin functions, RAM, converters, and control blocks satisfy the application without firmware or board changes.
Can PIC16F1779-I/P replace PIC16F1777-I/P on the same PCB?
PIC16F1779-I/P can fit the same 40-pin PDIP footprint and provides 14 KB of program memory at up to 32 MHz, matching the PIC16F1777-I/P headline memory and clock ratings. However, the PIC16F1779 carries 2 KB of RAM compared with 1 KB on the PIC16F1777, and mixed-signal pin assignments may differ. Treat it as a design-review substitution rather than an automatic replacement, and confirm every affected pin in the manufacturer data sheet.
Where can I buy PIC16F1777-I/P online?
The PIC16F1777-I/P can be requested through the Request a Quote form on this page. The form supports a direct sourcing request for the exact 40-pin PDIP orderable part and helps confirm current inventory, lot availability, and delivery scheduling. Do not substitute a 44-pin TQFP, 28-pin package, or a different temperature-grade code without reviewing the footprint and environmental requirements.
What is the price of PIC16F1777-I/P?
Use the Request a Quote form on this page for the current price of PIC16F1777-I/P. Quote-based sourcing is used because distributor pricing, inventory, and volume breaks can change daily and may differ by quantity and manufacturing lot. The request should specify the exact MPN, quantity, and required packaging form so that the returned commercial offer remains traceable to the 40-pin PDIP device.
What is the lead time for PIC16F1777-I/P?
The current lead time for PIC16F1777-I/P should be confirmed through the Request a Quote form on this page. Lead time depends on manufacturer inventory, distributor stock, production-lot availability, and the ordered quantity. Provide your required delivery date and annual usage so the sourcing response can distinguish stock procurement from scheduled allocation.
Is PIC16F1777-I/P in stock?
Inventory for PIC16F1777-I/P changes across distribution channels and is therefore checked through the Request a Quote form on this page. Submit the required quantity and target delivery date to receive a current availability confirmation for the exact 40-pin PDIP orderable code. Avoid treating a distributor search-result page as a guaranteed stock commitment before that confirmation is returned.
Is PIC16F1777-I/P suitable for a motor-control application?
The PIC16F1777-I/P is suitable for compact motor-control and power-conversion designs because it combines a 32 MHz 8-bit core with a 10-bit ADC, high-speed comparators, multiple operational amplifiers, and 10-bit and 16-bit PWM outputs. The high-speed comparators can support fast threshold detection, while the ADC provides feedback measurements. Design the power stage and protection circuitry separately, and verify current limits and timing against the manufacturer application guidance.
What is the best Microchip equivalent for PIC16F1777-I/P?
PIC16F1777-E/P is the most direct Microchip equivalent because it retains the same PIC16F1777 base configuration and 40-pin PDIP footprint while changing the temperature-grade code. For designs that can use additional memory, PIC16F1779-I/P offers the same 40-pin package and 14 KB Flash with 2 KB of RAM instead of 1 KB. The final choice should be based on temperature range, peripheral pin assignments, and firmware requirements.

Dados de referência de engenharia para PIC16F1777-I/P — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose PIC16F1777-I/P when the design needs a 40-pin PDIP controller with 14 KB of Flash, 1 KB of RAM, a 10-bit ADC, multiple operational amplifiers, high-speed comparators, DAC functions, and both 10-bit and 16-bit PWM outputs. Choose PIC16F1777-E/P as the closest option when the required temperature grade differs but the device configuration and PCB must remain unchanged. Choose PIC16F1779-I/P when 2 KB of RAM is needed and the altered pin and peripheral assignments are acceptable. Consider PIC16F1717-E/P for a different 40-pin PIC16F architecture only after verifying its analog resources and firmware requirements. PIC16F777-I/P is a legacy option requiring the most extensive peripheral and firmware review. For every substitution, confirm the pin-description table, temperature grade, peripheral mapping, and programming configuration rather than relying on package match alone.

Comparação com alternativas

Parâmetro Este produto PIC16F1777-E/P PIC16F1779-I/P PIC16F1778-I/P PIC16F1717-E/P PIC16F777-I/P
Package 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Architecture 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC
Temperature Grade Industrial (-I) Extended temperature grade (-E) Industrial (-I) Industrial (-I) Extended temperature grade (-E) Industrial (-I)

Principais diferenciais

  • Closest orderable alternative preserves the exact base-device identity (vs PIC16F1777-E/P)
  • Higher RAM is available without changing the through-hole package (vs PIC16F1779-I/P)
  • Dedicated analog integration reduces external signal-conditioning components (vs PIC16F1717-E/P)
  • Higher-resolution PWM supports finer control than a basic PIC16F timer implementation (vs PIC16F777-I/P)

Notas de projeto

Route analog inputs and analog-reference connections away from switching nodes and high-current return paths. Place the MCU supply bypass capacitors close to VDD and VSS pins, use short ground returns, and follow the decoupling values and placement shown in the Microchip PIC16(L)F1777/8/9 data sheet. Separate sensitive analog traces from PWM outputs and relay-driver routes to reduce conversion error and comparator noise.

Use the manufacturer pin-description and package drawings rather than relying on a generic 40-pin MCU footprint. The -I/P orderable code identifies a 40-pin PDIP configuration, while other members of the PIC16F1777 family are offered in different packages with different peripheral assignments. Before substituting any device, verify pin 1 orientation, programming pins, oscillator pins, supply pins, ADC inputs, DAC outputs, comparator inputs, and PWM channels.

Do not assume that every 40-pin PIC16F part is electrically interchangeable with the PIC16F1777-I/P. PIC16F1779-I/P adds RAM, while PIC16F1717-E/P and PIC16F777-I/P represent different peripheral generations. Validate the pin table, interrupt vectors, timer mappings, analog-channel availability, configuration registers, and programming-tool support. A PCB that physically accepts the replacement may still require firmware changes.

Calculate the digital and analog supply budget before adding external power circuitry, including sensor loads and any circuitry powered from MCU pins. The 10-bit ADC and comparator thresholds depend on a stable reference and clean supply, so measure the accuracy margin under the intended temperature range. For battery or charger designs, define low-voltage behavior, brownout settings, and safe-state outputs before programming the control firmware.

Assign high-speed switching functions and precision analog inputs deliberately rather than by availability alone. PWM outputs, comparators, and the ADC share a limited analog and digital pin structure, so moving a control signal between pins can change the required initialization sequence. Use the device's pin-selection constraints and peripheral mapping tables from the manufacturer data sheet, and test start-up behavior with the external analog network disconnected.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance declarations were not identified in the manufacturer page or distributor results. Confirm the current RoHS, REACH, lead-free, and automotive-qualification status for the exact orderable MPN before production release.

Buscas relacionadas

PIC16F1777-I/P datasheet PIC16F1777-I/P pinout PIC16F1777-I/P datasheet pdf PIC16F1777-I/P equivalent PIC16F1777-I/P replacement PIC16F1777-I/P price PIC16F1777-I/P stock Microchip PIC16F1777-I/P PIC16F1777-I/P vs PIC16F1779-I/P PIC16F1777 40-pin PDIP microcontroller PIC16F1777 10-bit ADC 16-bit PWM PIC16F1777 battery charging controller PIC16F1777 motor control application

Componentes & termos relacionados

Microchip Technology PIC16F1777-I/P PIC16F1777 PIC16(L)F177X PIC16F1777-E/P PIC16F1779-I/P PIC16F1778-I/P PIC16F1717-E/P PIC16F777-I/P PIC microcontroller 8-bit RISC microcontroller embedded controller semiconductor Flash program memory static RAM 10-bit ADC digital-to-analog converter 5-bit DAC 10-bit DAC operational amplifier high-speed comparator 10-bit PWM 16-bit PWM programmable ramp generator PDIP-40 surface mount package family battery management motor control power supply control LED lighting
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ