PIC16F1826-E/P - 32MHz 8-Bit MCU | Microchip Technology
N.º da peça: PIC16F1826-E/P ✓ AtivoPIC16F1826-E/P Visão geral
A microcontroller is a programmable system-on-chip that combines a CPU core, program memory, data memory, I/O ports, oscillators, and peripheral functions on one semiconductor device. The PIC16F1826 is specifically designed for compact embedded-control applications where low power consumption, rapid execution, and a broad set of integrated peripherals can reduce the number of discrete components needed on the board.
Program memory provides 3.5 KB of space for firmware, while the 256-byte RAM supports working variables, stack operations, and data buffering. The 16 I/O pins can be assigned to digital inputs and outputs or to compatible peripheral functions. The device also includes the mTouch capacitive-sensing capability associated with the PIC16F1826 family, allowing capacitive sensing to be implemented without separate sensor packages when the application and board conditions support it.
The enhanced mid-range PIC16 core supports a 32 MHz operating speed, and the internal oscillator provides a straightforward clock source for battery-operated or mains-powered products. MPLAB X IDE and the MPLAB Snap in-circuit debugger/programmer form the supported development workflow, allowing firmware to be compiled, programmed, and debugged in the same environment used for many other PIC16 designs.
Typical uses include compact temperature controllers, capacitive-touch control panels, battery-powered instruments, small motor controllers, LED lighting modules, and general-purpose control boards. The 18-pin PDIP format is particularly useful during prototyping, for educational designs, and for products assembled with through-hole components rather than high-density surface-mount packaging.
When planning a PCB, treat the I/O assignment, oscillator start-up timing, reset configuration, and programming interface as the main design constraints. Confirm the operating voltage and peripheral limits in the manufacturer datasheet before assigning 5 V signals to the I/O pins, and provide a programming connector that remains accessible after the board is assembled.
This page consolidates the exact device characteristics, package information, drop-in replacement analysis, and application guidance needed to plan a PIC16F1826-E/P design. It also identifies the functional differences between the temperature-grade and package variants that are frequently compared with this part.
Alternativas drop-in para PIC16F1826-E/P — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16F1826-E/P (mesmo formato e footprint) — diferindo em Package, ADC, I/O Pins, Timers, Mounting Type.
PIC16F1826-I/P
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16F1826-E/P Classificações máximas e características elétricas
| Product Type | 8-bit Flash Microcontroller |
| Manufacturer | Microchip Technology |
| Series | PIC16F1826 |
| Architecture | Enhanced mid-range PIC16 RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Program Memory | 3.5 KB (2K x 14 words) |
| Data RAM | 256 bytes |
| General-Purpose I/O | 16 pins |
| Internal Oscillator | Yes |
| Tensão de alimentação de operação | 3 V |
| Encapsulamento | 18-pin PDIP |
| Package Pitch | 7.62 mm (0.300 inch) |
| Estilo de montagem | Through-hole |
| Low-Power Technology | PIC XLP nanoWatt technology |
| Capacitive Sensing | mTouch capacitive sensing |
| Program Memory Type | Flash |
| Instruction Set | PIC16 RISC instruction set |
| Operating Temperature Grade | Extended commercial grade |
| Status RoHS | Compliant |
| Development Environment | MPLAB X IDE |
| Programming and Debug Tool | MPLAB Snap in-circuit debugger/programmer |
Guia de Configuração de Pinos do PIC16F1826-E/P 7.62 mm (0.300 inch)
Configuração de pinos para PIC16F1826-E/P (pacote 7.62 mm (0.300 inch)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC16F1826-E/P.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC16F1826-E/P é adequado para 6 aplicaçãos: Capacitive-Touch Control Panel, Battery-Powered Sensor Node, Temperature and Process Controller, LED Lighting and Dimming Module, Small Motor and Actuator Controller, Programmable Instrumentation Hub.
Capacitive-Touch Control Panel
The PIC16F1826-E/P fits a capacitive-touch control panel because the PIC16F1826 family provides mTouch sensing alongside 16 general-purpose I/O pins. The 32 MHz core can service touch scanning, debouncing, and display updates within a compact control design. Its 3.5 KB flash capacity accommodates touch configuration, interface logic, and application firmware, while 256 bytes of RAM is sufficient for short-lived button states and event buffers. Design the sensor pads, guard structures, and analog routing according to the manufacturer mTouch guidance, then calibrate the thresholds in the finished enclosure because finger coupling depends on the mechanical stack.
Recomendado
Battery-Powered Sensor Node
The PIC16F1826-E/P is suitable for a battery-powered sensor node that must combine local processing with low standby demand. The internal oscillator removes the need for an external crystal, and the PIC XLP operating modes support duty-cycled measurements and sleep intervals. Its 3.5 KB flash stores the acquisition routine and radio-control logic, while the 16 I/O pins can serve a sensor, indicator, and serial interface. Size the battery from the manufacturer sleep and active-current tables rather than a single nominal figure, because oscillator settings, peripheral enablement, and I/O transitions materially change the average load.
Recomendado
Temperature and Process Controller
The PIC16F1826-E/P works well in a temperature or process controller where an inexpensive MCU must manage sensors, relays, and operator inputs. A 32 MHz execution rate provides headroom for sampling, control calculations, filtering, and communication updates, while the 16 I/O pins simplify direct connections to digital sensors and status indicators. The 3.5 KB program area is appropriate for a focused control loop rather than a large graphical application. Use the manufacturer's timer, comparator, and analog-interface guidance when assigning pins, and isolate high-voltage or high-current outputs from the low-voltage control circuitry.
Recomendado
LED Lighting and Dimming Module
The PIC16F1826-E/P is appropriate for an LED lighting or dimming module that requires accurate timing and multiple control outputs. Its 32 MHz core supports fast PWM updates, while the 16 I/O pins can drive LED indicators, control logic, and communication lines. The internal oscillator simplifies standalone modules, and the 3.5 KB flash is sufficient for calibration tables, fade sequences, and fault handling. Choose PWM-capable pins according to the device data sheet and confirm LED current is limited by appropriate driver circuitry rather than by microcontroller port current. Thermal monitoring of the LED board is also advisable in high-output designs.
Recomendado
Small Motor and Actuator Controller
The PIC16F1826-E/P can supervise small motors, valves, and actuators in a compact controller. The 32 MHz core supports responsive state-machine control, while the available I/O can handle limit inputs, encoder signals, and driver-control outputs. Its flash memory stores motion profiles and diagnostic logic, and the PIC XLP features help when the controller spends most of its time waiting. Confirm the timer, capture, and PWM capabilities assigned to the chosen pins, and include electrical isolation or protection where the actuator operates at voltages above the microcontroller supply limits.
Recomendado
Programmable Instrumentation Hub
The PIC16F1826-E/P fits a programmable instrumentation hub that gathers switch states, drives displays, and coordinates measurement peripherals. Its 16 I/O pins and 32 MHz processing rate provide enough parallelism for panel inputs, status LEDs, and a communications link, while the 256-byte RAM covers short control and buffering tasks. Program memory of 3.5 KB is best suited to a focused acquisition and routing function rather than large data logging. Use the exposed ICSP interface for production programming and maintain a stable clock configuration if timing-sensitive measurements depend on the internal oscillator.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16F1826-E/P — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F1826-I/P |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 18-pin PDIP | 18-pin PDIP - same footprint |
| CPU Architecture | 8-bit enhanced mid-range PIC16 RISC | 8-bit enhanced mid-range PIC16 RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Program Memory | 3.5 KB (2K x 14 words) | 3.5 KB (2K x 14 words) |
| Data RAM | 256 bytes | 256 bytes |
| General-Purpose I/O | 16 pins | 16 pins |
| Internal Oscillator | Yes | Yes |
| Temperature Grade | Extended commercial grade (-E) | Industrial grade (-I) |
| Capacitive Sensing | mTouch capacitive sensing | mTouch capacitive sensing |
| Lead Pitch | 7.62 mm (0.300 inch) | 7.62 mm (0.300 inch) |
Principais diferenciais
- True through-hole drop-in sourcing alternative (vs PIC16F1826-I/P)
- Broader temperature coverage in the drop-in option (vs PIC16F1826-I/P)
- Integrated low-power and touch resources (vs Generic discrete 8-bit controller)
Notas de projeto
Place the MCU close to the board's local decoupling and route the supply and ground connections with low loop area. Keep sensitive analog and capacitive-sensing traces away from switching nodes and high-current LED paths. The 18-pin PDIP footprint leaves generous routing space, but the ICSP programming connector should still be placed near the appropriate package edge so it remains accessible in an assembled enclosure.
Assign I/O pins from the device data sheet rather than only by the port letter. Several pins can support alternate analog, comparator, serial, or timer functions, and choosing the wrong pin can prevent a required peripheral from operating. For mTouch designs, follow the manufacturer's sensor-layout guidance and preserve the recommended guard structure around the sensing electrodes to reduce coupling from adjacent traces.
Choose clock, peripheral, and sleep modes deliberately because they determine the average power consumption of a battery-powered design. Calculate the energy budget from the manufacturer current tables for active and sleep operation, then add the external sensor and communications loads. If the design depends on accurate timing, verify oscillator tolerance and account for temperature effects before treating the internal oscillator as a precision time reference.
Do not assume that a different package suffix is interchangeable. The PIC16F1826-E/MV is a surface-mount package variant and cannot replace the PIC16F1826-E/P on an unmodified 18-pin PDIP PCB. Similarly, the -I/P and -E/P versions share a footprint but have different temperature grades. Confirm the package drawing, temperature requirement, supply limits, and peripheral pin multiplexing before approving a substitution.
Informações de conformidade
RoHS compliance is indicated for the PIC16F1826-E/P in product-listing information. Other environmental and material declarations are not stated and should be confirmed through the manufacturer product documentation before regulatory submission.