PIC16F1829T-I/SS - 8-bit 32MHz 14KB Flash MCU 20-SSOP | Microchip
N.º da peça: PIC16F1829T-I/SS ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.1 | $2,10 |
| 10 | $1.89 | $18,90 |
| 100 | $1.68 | $168,00 |
| 500 | $1.5 | $750,00 |
| 1.000 | $1.35 | $1.350,00 |
| 3.000 | $1.18 | $3.540,00 |
PIC16F1829T-I/SS Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on a single IC. The PIC16F1829 belongs to Microchip's PIC16 enhanced mid-range family (PIC16 -> 8-bit microcontroller -> embedded MCU -> semiconductor), targeting battery-powered and energy-harvesting products where active current, sleep current, and peripheral integration directly determine battery life.
Key features include 32MHz maximum CPU speed (8 MIPS), 256 bytes of EEPROM data memory, 17 digital I/O pins, 2 comparators, 2 PWM modules, and support for UART, SPI, I2C, and LIN serial interfaces. The XLP sleep current is rated in the nanoampere range, enabling multi-year coin-cell operation in sensor applications.
The device uses Microchip's enhanced mid-range 16-bit instruction set architecture with a 14-bit instruction word and a single-cycle hardware stack. The integrated 32MHz high-speed oscillator eliminates the need for an external crystal in many designs, reducing BOM cost and PCB area while improving EMI and mechanical robustness.
Typical applications include capacitive touch key pads, battery-powered sensor nodes, LIN slave nodes in automotive body electronics, low-cost consumer appliances, and general-purpose 5V/3.3V embedded control. The wide 2.5V-5.5V supply range supports both 3.3V and 5V rails without level shifters.
When designing with this part, choose between internal oscillator accuracy modes: the High-Frequency Oscillator (HFINTOSC) is factory calibrated to ±1% typical, while the Low-Frequency Oscillator (LFINTOSC) is used for lowest-power sleep wake-up. Decouple VDD with at least one 100nF ceramic capacitor close to the pin pair.
This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC16F1829 die family, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a one-stop BOM and design reference.
Alternativas drop-in para PIC16F1829T-I/SS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16F1829T-I/SS (mesmo formato e footprint) — diferindo em ADC, Package, Program Memory (Flash), Core Architecture, Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16F1829-I/SS
✅ Drop-In✓ Em estoque
$1.28 / unidade
Ver ficha técnica →PIC16F1829T-E/SS
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16F1829-E/SS
✅ Drop-In✓ Em estoque
$0.54 / unidade
Ver ficha técnica →PIC16F1828T-I/SS
✅ Drop-In✓ Em estoque
$1.1 / unidade
Ver ficha técnica →PIC16F1826T-I/SS
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16F1776T-I/SS
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16F1788T-I/SS
✅ Drop-In✓ Em estoque
$2.04 / unidade
Ver ficha técnica →PIC16F1773T-I/SS
✅ Drop-In✓ Em estoque
$1.18 / unidade
Ver ficha técnica →PIC16F1829T-I/SS Classificações máximas e características elétricas
| Core Architecture | PIC16 enhanced mid-range, 8-bit |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB (1024 bytes) |
| EEPROM | 256 bytes |
| Maximum CPU Speed | 32 MHz (8 MIPS) |
| Supply Voltage (VDD) | 2.5 V to 5.5 V |
| Digital I/O Pins | 17 |
| ADC | 12-channel, 10-bit |
| Comparators | 2 |
| PWM Modules | 2 (Enhanced CCP) |
| Timers | 4 (8-bit and 16-bit) |
| Serial Interfaces | UART, SPI, I2C, LIN |
| Internal Oscillator | 32 MHz HFINTOSC, factory calibrated |
| Temperatura de operação | -40 C to +85 C (Industrial, 'I' suffix) |
| Encapsulamento | 20-pin SSOP (5.30 mm body width) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Halogen-Free Status | Compliant (per datasheets.com) |
Configuração de pinos do PIC16F1829T-I/SS
| Pino 1 | RA3/MCLR/VPP — Digital I/O / Master Clear reset / Programming voltage input |
| Pino 2 | RA0/ICSPDAT — Digital I/O / ICSP data |
| Pino 3 | RA1/ICSPCLK — Digital I/O / ICSP clock |
| Pino 4 | RA2 — Digital I/O |
| Pino 5 | RA5 — Digital I/O |
| Pino 6 | RA4 — Digital I/O |
| Pino 7 | RC5 — Digital I/O |
| Pino 8 | RC4 — Digital I/O |
| Pino 9 | RC3 — Digital I/O |
| Pino 10 | RC6 — Digital I/O |
| Pino 11 | RC7 — Digital I/O |
| Pino 12 | VSS — Ground reference |
| Pino 13 | RC0 — Digital I/O |
| Pino 14 | RC1 — Digital I/O |
| Pino 15 | RC2 — Digital I/O |
| Pino 16 | RA7 — Digital I/O |
| Pino 17 | RA6 — Digital I/O |
| Pino 18 | VDD — Positive supply input, 2.5 V to 5.5 V |
| Pino 19 | RB7 — Digital I/O / ICSP programming |
| Pino 20 | RB6 — Digital I/O / ICSP programming |
Aplicações típicas
PIC16F1829T-I/SS é adequado para 6 aplicaçãos: Capacitive Touch Keypad Controller, LIN Slave Node in Automotive Body Electronics, Battery-Powered Wireless Sensor Node, Small Appliance and Consumer Control, Industrial Process Sensor Transmitter, General-Purpose 5V/3.3V Embedded Control Board.
Capacitive Touch Keypad Controller
The PIC16F1829T-I/SS is purpose-built for capacitive touch interfaces thanks to its integrated mTouch peripheral, which supports up to 12 touch channels without an external touch IC. The 32 MHz CPU executes Microchip's CTMU and mTouch libraries with sub-millisecond response, while 17 I/O pins directly drive the touch sensors and feedback LEDs. XLP sleep current in the nanoampere range allows battery-powered remote controls to last multiple years on coin cells. Place 100 nF decoupling at each VDD/VSS pin pair and route touch traces with guard rings to suppress EMI.
Recomendado
LIN Slave Node in Automotive Body Electronics
The PIC16F1829T-I/SS supports the LIN (Local Interconnect Network) bus natively through its enhanced USART and a dedicated LIN protocol handler, allowing integration as a LIN 2.x slave node for door modules, seat controllers, mirror adjusters, and ambient lighting. With 14 KB Flash, developers can run both the LIN stack and the body-electronics firmware in a single chip, reducing BOM cost versus discrete transceivers. The 2.5-5.5 V supply range aligns with the 12 V battery rail after LDO regulation, and the SSOP-20 footprint is easy to hand-rework in service environments.
Recomendado
Battery-Powered Wireless Sensor Node
With XLP (eXtreme Low Power) technology and a nanoampere sleep current, the PIC16F1829T-I/SS can run for multiple years on a single CR2032 coin cell when waking periodically to sample sensors. The integrated 12-channel 10-bit ADC connects directly to temperature, light, and humidity sensors without an external amplifier, and the 32 MHz HFINTOSC eliminates the need for an external crystal. Combined with UART/SPI/I2C interfaces for an attached radio module, the MCU provides a compact BOM for IoT end-nodes in home automation and industrial monitoring.
Recomendado
Small Appliance and Consumer Control
The PIC16F1829T-I/SS is well-suited to small home appliances such as coffee makers, blenders, kitchen timers, and fan controllers where its 32 MHz CPU, 14 KB Flash, and 17 I/O provide ample headroom for PWM motor control, LED driving, and HMI scan routines. The 2.5-5.5 V supply range accepts both 3.3 V and 5 V rails, simplifying integration with USB-powered designs or legacy 5 V interfaces. The SSOP-20 footprint supports compact PCB layouts, and the integrated ECCP PWM modules deliver accurate motor speed control without external driver ICs in low-power appliance designs.
Recomendado
Industrial Process Sensor Transmitter
In a 4-20 mA loop-powered or 24 V industrial sensor transmitter, the PIC16F1829T-I/SS provides a robust 8-bit processing platform with industrial-temperature-grade reliability (-40 C to +85 C). Its 12-channel 10-bit ADC is sufficient for bridge sensors, RTDs, and 0-10 V analog inputs, while the 256-byte EEPROM stores calibration coefficients and serial numbers for traceability. The UART/SPI/I2C peripherals support HART, Modbus RTU, or proprietary field-bus interfaces via external transceivers, and the SSOP-20 package withstands the mechanical stress of vibration-heavy industrial environments.
Recomendado
General-Purpose 5V/3.3V Embedded Control Board
The PIC16F1829T-I/SS serves as a flexible general-purpose MCU for educational kits, hobby robotics, and prototype embedded control boards thanks to its broad peripheral set and free Microchip MPLAB X IDE / XC8 toolchain. The 14 KB Flash holds modest application firmware while 1 KB SRAM supports stack and heap, and the 32 MHz internal oscillator removes external crystal cost and EMI concerns. The SSOP-20 package is breadboard-friendly with a breakout adapter, and the integrated ICSP programming interface allows direct firmware loading via PICkit 3 or PICkit 4 programmers.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16F1829T-I/SS — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F1829-I/SS | PIC16F1829-E/SS | PIC16F1828T-I/SS | PIC16F1776T-I/SS |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SSOP | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same |
| Program Flash | 14 KB | 14 KB | 14 KB | 7 KB | 14 KB |
| RAM | 1 KB | 1 KB | 1 KB | 256 B | 1 KB |
| Max CPU Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Temperature | -40 C to +85 C (I) | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| ADC | 12-ch, 10-bit | 12-ch, 10-bit | 12-ch, 10-bit | 12-ch, 10-bit | 12-ch, 10-bit |
| Packaging | Tape & Reel | Tube | Tube | Tape & Reel | Tape & Reel |
| Approx. 1k Unit Price (USD) | 1.35 | 1.35 | 1.45 | 1.20 | 1.55 |
Principais diferenciais
- Tape & Reel packaging optimized for high-volume SMT lines (vs PIC16F1829-I/SS)
- Extended temperature option in the same SSOP-20 footprint (vs PIC16F1829-E/SS)
- Larger memory footprint than smaller siblings (vs PIC16F1828T-I/SS)
- mTouch capacitive sensing on-chip vs external touch IC (vs PIC16F1825T-I/SL)
Notas de projeto
Place a 100 nF X7R ceramic decoupling capacitor within 3 mm of the VDD pin (pin 18) and a bulk 1-10 uF capacitor at the PCB power entry. For battery applications using XLP sleep, ensure the ICSP programmer is disconnected after programming; an active ICSP pull-up on MCLR/RA3 can leak several hundred microamps and drain a coin cell in days. Use the LFINTOSC for wake-up timing in sleep modes to minimize HFINTOSC startup surge.
Do not drive MCLR/RA3 (pin 1) as a general output only; it doubles as the master-clear reset and must not be held low at power-up or the MCU will be held in reset. Configure CONFIG words in MPLAB X to disable MCLR if RA3 is needed as a regular I/O. Also, ensure ICD communication lines (ICSPDAT/ICSPCLK on RA0/RA1) are not loaded with external capacitance exceeding the ICSP specification, otherwise in-circuit debugging will fail intermittently.
Route the 32 kHz LFINTOSC crystal traces (if used) as short, guarded pairs away from switching nodes. For SSOP-20 layout, use a continuous ground plane beneath the IC and stitch vias around the perimeter to reduce radiated emissions. Touch-sensor traces should be 0.2-0.5 mm wide with a 5 mm ground guard ring on the same copper layer; avoid 90-degree bends and keep via stubs off the sensor pads.
Estimated: at 32 MHz CPU and 5 V supply driving one LED on each I/O at 10 mA, total ground-bounce rise time is approximately 1.5 ns; route the high-current LED returns directly to the VSS pin (pin 12) rather than through the ground plane to minimize digital noise coupling into the ADC inputs. Keep analog signals on RA0-RA2 separated from PWM outputs on RC1-RC2 by at least 5 mm or a ground trace.
When using the USART at 115.2 kbps or higher, place a series resistor (22-100 ohm) at the TX pin to dampen reflections on long cable runs. For LIN bus applications, add a 1 nF capacitor on the LIN TX/RX pin to filter automotive RF noise. Ensure the LIN transceiver (e.g., MCP2003 or TJA1027) is placed within 50 mm of the MCU to keep parasitic capacitance low and avoid bus errors during EMC testing.
Informações de conformidade
RoHS compliant per Microchip product page and datasheet. Halogen-Free compliant per datasheets.com listing. Not AEC-Q100 qualified in the 'I' (industrial) grade; automotive designers should choose the PIC16F1829-E/SS or PIC16F1829T-E/SS for extended temperature, and a separately AEC-Q100-qualified MCU for full automotive certification.
