PIC16LC64A-04I/P - 8-Bit 4MHz 3.5KB OTP MCU 40-PDIP | Microchip
N.º da peça: PIC16LC64A-04I/P ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.2 | $8,20 |
| 10 | $7.38 | $73,80 |
| 100 | $6.56 | $656,00 |
| 500 | $5.85 | $2.925,00 |
| 1.000 | $5.2 | $5.200,00 |
PIC16LC64A-04I/P Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (program + RAM), and peripheral interfaces onto one die. MCUs sit at the lowest tier of embedded compute - below microprocessors (which need external memory) and embedded SoCs - and dominate applications where deterministic real-time control, low power, and low cost matter more than raw throughput. The PIC16C family uses a Harvard RISC architecture with a fixed 14-bit instruction word, only 35 single-word instructions, and single-cycle execution (program branches take two cycles), giving a 4 MHz oscillator up to 1 MIPS of predictable throughput.
Key features of the PIC16LC64A-04I/P include 128 bytes of RAM, an integrated analog comparator, a Watchdog Timer with on-chip RC oscillator, power-saving Sleep mode, in-circuit serial programming capability via two pins, and a programmable code-protection mechanism. The OTP program memory allows one-time field programming, making the part suited for production volumes where firmware is stable and flash reprogrammability is not required.
Architecturally, the device uses an enhanced PIC16C6X core with separate program and data buses, a 13-bit program counter capable of addressing 8K x 14 of program space, and a file-register architecture of 128 x 8 general-purpose RAM plus special-function registers. The 22 I/O pins are arranged in ports A (6), B (8), C (8) for digital I/O, with several pins multiplexed to peripherals such as the USART (SCI/SPI), timers, and the analog comparator.
Typical applications include low-cost industrial control subsystems, appliance controllers, automotive body electronics (non-safety), sensor signal conditioning front-ends, and legacy embedded products still in service. Its wide 3.0V to 5.5V operating range, low-power consumption (15 uA typical at 5V/4 MHz, 1 uA typical at 3V/32 kHz), and OTP memory make it well-suited for sealed, high-volume, cost-sensitive designs.
A primary design consideration when using OTP is that firmware bugs cannot be patched in the field. Engineers should prototype on a windowed CERDIP variant (PIC16C64A-04I/P) or a Flash sibling (PIC16F64A family) before committing to OTP for production.
This page synthesizes distributor pricing, OTP vs Flash sibling variants, and design considerations for the PIC16LC64A-04I/P beyond the manufacturer datasheet.
Alternativas drop-in para PIC16LC64A-04I/P — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16LC64A-04I/P (mesmo formato e footprint) — diferindo em Package, Mounting Type, Program Memory Size, Program Memory Type, Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16F74A-I/P
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16F77A-I/P
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16C64A-04I/P
✅ Drop-In✓ Em estoque
$6.1 / unidade
Ver ficha técnica →PIC16LC64A-04/P
✅ Drop-In✓ Em estoque
$4.92 / unidade
Ver ficha técnica →PIC16F737-I/P
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16LC64A-04I/P Classificações máximas e características elétricas
| Core Architecture | PIC16C 8-bit RISC (Harvard) |
| Program Memory Type | OTP (One-Time Programmable) EPROM |
| Program Memory Size | 3.5 KB (2K x 14) |
| RAM Size | 128 bytes |
| Data EEPROM | 0 bytes (not present on this OTP variant) |
| Frequência máxima de clock | 4 MHz |
| Instruction Set Size | 35 single-word instructions |
| Instruction Word Width | 14 bits |
| Execution Time per Instruction | 1 cycle (program branches: 2 cycles) |
| Supply Voltage Range | 3.0 V to 5.5 V |
| I/O Pins | 22 |
| Timers | Timer0, Timer1, Timer2 |
| Communication Peripherals | USART (SCI/SPI), SSP |
| Analog Peripherals | 1 analog comparator |
| Faixa de temperatura de operação | -40 C to +85 C (Industrial) |
| Package Type | 40-pin PDIP (Plastic DIP, 0.600 inch / 15.24 mm width) |
| Tipo de montagem | Through-Hole (THT) |
| Contagem de pinos | 40 |
| Power-Saving Modes | Sleep mode with Wake-up on pin change / WDT |
| Watchdog Timer | Yes, with on-chip RC oscillator |
| In-Circuit Programming | ICSP via RB6/RB7 |
| Code Protection | Programmable code-protection bit |
| Typical Current @ 5V, 4 MHz | 15 uA (per datasheet) |
| Typical Current @ 3V, 32 kHz | 1 uA (per datasheet) |
Configuração de pinos do PIC16LC64A-04I/P
| Pino 1 | /MCLR — Master Clear (reset) input, programming voltage input |
| Pino 2 | RA0 — PORTA bit 0 / analog comparator input |
| Pino 3 | RA1 — PORTA bit 1 / analog comparator input |
| Pino 4 | RA2 — PORTA bit 2 / analog comparator output |
| Pino 5 | RA3 — PORTA bit 3 / analog comparator input |
| Pino 6 | RA4 — PORTA bit 4 / Timer0 clock input (open-drain) |
| Pino 7 | RA5 — PORTA bit 5 / SS pin for SSP module |
| Pino 8 | OSC1 — Crystal oscillator input / external clock input |
| Pino 9 | OSC2 — Crystal oscillator output |
| Pino 10 | RC0 — PORTC bit 0 / Timer1 oscillator input |
| Pino 11 | VDD — Positive supply voltage |
| Pino 12 | VSS — Ground reference |
| Pino 13 | RC1 — PORTC bit 1 / Timer1 oscillator output |
| Pino 14 | RC2 — PORTC bit 2 / CCP1 output |
| Pino 15 | RC3 — PORTC bit 3 / SCL (I2C clock) for SSP |
| Pino 16 | RC4 — PORTC bit 4 / SDA (I2C data) for SSP |
| Pino 17 | RC5 — PORTC bit 5 / SDO (SPI data out) |
| Pino 18 | RC6 — PORTC bit 6 / TX (USART asynchronous transmit) / CK (USART clock) |
| Pino 19 | RC7 — PORTC bit 7 / RX (USART asynchronous receive) / DT (USART data) |
| Pino 20 | VSS — Ground reference |
| Pino 21 | RD0 — PORTD bit 0 / PSP data bit 0 |
| Pino 22 | RD1 — PORTD bit 1 / PSP data bit 1 |
| Pino 23 | RD2 — PORTD bit 2 / PSP data bit 2 |
| Pino 24 | RD3 — PORTD bit 3 / PSP data bit 3 |
| Pino 25 | RD4 — PORTD bit 4 / PSP data bit 4 |
| Pino 26 | RD5 — PORTD bit 5 / PSP data bit 5 |
| Pino 27 | RD6 — PORTD bit 6 / PSP data bit 6 |
| Pino 28 | RD7 — PORTD bit 7 / PSP data bit 7 |
| Pino 29 | RE0 — PORTE bit 0 / /RD control for PSP |
| Pino 30 | RE1 — PORTE bit 1 / /WR control for PSP |
| Pino 31 | RE2 — PORTE bit 2 / /CS control for PSP |
| Pino 32 | VDD — Positive supply voltage |
| Pino 33 | VSS — Ground reference |
| Pino 34 | RB0 — PORTB bit 0 / external interrupt |
| Pino 35 | RB1 — PORTB bit 1 |
| Pino 36 | RB2 — PORTB bit 2 |
| Pino 37 | RB3 — PORTB bit 3 |
| Pino 38 | RB4 — PORTB bit 4 / interrupt-on-change |
| Pino 39 | RB5 — PORTB bit 5 / interrupt-on-change |
| Pino 40 | RB6 — PORTB bit 6 / ICSP clock / interrupt-on-change |
Aplicações típicas
PIC16LC64A-04I/P é adequado para 6 aplicaçãos: Industrial Control Subsystems, Appliance Controllers, Automotive Body Electronics (Non-Safety), Sensor Signal Conditioning Front-Ends, Legacy Embedded Products Still in Service, Educational and Hobby Projects.
Industrial Control Subsystems
The PIC16LC64A-04I/P fits industrial control subsystems because its 22 digital I/O pins, three timers, and USART peripheral cover the typical sensor/actuator interface needs of a small PLC front-end or relay-replacement board. Its 3.0V to 5.5V supply range accepts both 3.3V and 5V transducers without level shifters, while the 128-byte RAM and 3.5 KB OTP program memory suit fixed-function logic such as PID loops, motor sequencing, or thermostat-style controllers. The -40C to +85C industrial temperature range is qualified for factory-floor enclosures, and the OTP memory prevents field tampering with calibrated constants. Estimated firmware headroom: roughly 2,000 14-bit instructions is sufficient for one or two feedback loops plus a serial command parser.
Recomendado
Appliance Controllers
The PIC16LC64A-04I/P is well matched to appliance controllers such as washing-machine timers, microwave ovens, and dishwasher sequencers. Its 22 I/O pins drive seven-segment displays, keypads, and triac/SCR gate drivers, while the three on-chip timers generate PWM for heater elements or motor speed control. The 4 MHz RISC core delivers deterministic 1 MIPS throughput for cycle-by-cycle control, and the 15 uA active current at 5V keeps standby consumption modest. Because the OTP memory locks firmware at production time, end users cannot reflash the controller, which is desirable for safety-certified appliances. The wide 3.0V to 5.5V supply allows direct connection to rectified 5V rails.
Recomendado
Automotive Body Electronics (Non-Safety)
The PIC16LC64A-04I/P serves automotive body-electronics applications such as interior lighting controllers, seat-position memory modules, and HVAC blend-door actuators. Its -40C to +85C industrial temperature range covers cabin-environment conditions, and the 22 I/O pins handle the multiple brushed-motor drivers and switch-scan inputs typical of body modules. The OTP memory prevents accidental field reprogramming that could affect vehicle warranty. Note that this part is not AEC-Q100 qualified; automotive safety-critical or under-hood applications should use AEC-Q100-qualified PIC16F equivalents such as the PIC16F74-I/P automotive version. The 3.0V to 5.5V supply tolerates load-dump transients when paired with proper clamping.
Recomendado
Sensor Signal Conditioning Front-Ends
The PIC16LC64A-04I/P is suitable as the digital front-end for low-cost sensor signal conditioning modules such as thermistor bridges, photocell arrays, or simple 4-20 mA loop monitors. Its on-chip analog comparator performs threshold detection without an external op-amp, and the timers measure frequency or pulse width from sensor outputs. With 22 I/O pins, the same MCU scans a keypad, drives an indicator LED, and transmits calibration constants over the USART. The low 1 uA Sleep current at 3V/32 kHz enables battery-backed sensor nodes that wake periodically to take a measurement and return to sleep. The 128-byte RAM holds a small ring buffer for averaging.
Recomendado
Legacy Embedded Products Still in Service
The PIC16LC64A-04I/P remains in service as the controller for legacy embedded products manufactured in the 1990s and 2000s, including industrial instrumentation, vending-machine controllers, security-system keypads, and HVAC zone controllers. Because these products have long field lifetimes (15-25 years), service and repair depots still need OTP replacements to fix returned units where firmware has not changed. The OTP memory ensures absolute firmware identity between factory and field repair. For these service-only applications, sourcing from authorized franchised distributors with documented traceability is essential to avoid counterfeit parts. The 40-pin PDIP package also remains friendly to through-hole rework benches.
Recomendado
Educational and Hobby Projects
The PIC16LC64A-04I/P is used in educational and hobby projects because its 40-pin PDIP package fits standard 0.600-inch breadboards and its documented instruction set (35 instructions) makes it a common teaching example in PIC microcontroller courses. The 22 I/O pins are sufficient to drive multiple LEDs, a 7-segment display, and a serial LCD. The ICSP capability on RB6/RB7 allows students to program the part without removing it from the breadboard, and the 4 MHz maximum clock avoids RF interference that complicates laboratory measurements. While the OTP memory is impractical for student iteration, the same 40-pin PDIP socket can later accept a flash-based PIC16F74A-I/P without rewiring.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16LC64A-04I/P — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F74A-I/P | PIC16F77A-I/P | PIC16C64A-04I/P | PIC16LC64A-04/P | PIC16F737-I/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-PDIP | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same |
| Program Memory | 3.5 KB OTP | 4 KB Flash | 8 KB Flash | 3.5 KB OTP | 3.5 KB OTP | 7 KB Flash |
| RAM | 128 bytes | 192 bytes | 192 bytes | 128 bytes | 128 bytes | 368 bytes |
| Max Clock | 4 MHz | 20 MHz | 20 MHz | 4 MHz | 4 MHz | 20 MHz |
| Supply Voltage | 3.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 4.5 V to 6.0 V | 3.0 V to 5.5 V | 2.0 V to 5.5 V |
| I/O Pins | 22 | 22 | 22 | 22 | 22 | 25 |
| Memory Type | OTP (one-time) | Flash (reprogrammable) | Flash (reprogrammable) | OTP (one-time) | OTP (one-time) | Flash (reprogrammable) |
| Lifecycle Status | Obsolete | Active | Active | Obsolete | Obsolete | Active |
Principais diferenciais
- Flash reprogrammability (vs PIC16F74A-I/P)
- Wide low-voltage supply range (vs PIC16C64A-04I/P)
- Industrial temperature grade (vs PIC16LC64A-04/P)
Notas de projeto
Do not attempt to field-update firmware on the PIC16LC64A-04I/P - its OTP EPROM can be written only once per memory cell. For development, prototype with the windowed CERDIP variant (PIC16C64A-04I/P, UV-erasable) or migrate to the flash-based PIC16F74A-I/P which is pin-compatible and ICSP-reprogrammable. Estimated OTP endurance: 1 write cycle per cell; firmware re-spin requires a new batch of parts.
The PIC16LC64A-04I/P Sleep current is approximately 1 uA typical at 3V / 32 kHz per the datasheet, which is acceptable for battery-backed sensor nodes. However, ensure that the brown-out reset (BOR) configuration is enabled in the CONFIG word to avoid undefined behavior during supply ramp-up at cold start. Add a 100 nF decoupling cap on each VDD/VSS pin pair (pins 11/12 and 31/33) placed within 5 mm of the package leads.
For the 40-pin PDIP package, route the crystal traces (OSC1 / OSC2, pins 8 and 9) as short and symmetrical as possible, with the load capacitors (typically 15-33 pF) returned to a quiet ground island. Keep high-current switching traces (PORTB/PORTC sink/source >20 mA) away from the oscillator loop. The /MCLR pin (pin 1) needs a 10 kohm pull-up to VDD plus a 100 nF to VSS for noise immunity in industrial environments.
The PIC16LC64A-04I/P in 40-pin PDIP has a typical theta_JA of approximately 50 C/W in still air, so thermal management is rarely a concern at its 15 uA active current. However, in hot industrial enclosures (ambient 70 C) with continuous 5V operation, derate the clock to 32 kHz or use Sleep mode to keep junction temperature below the 125 C maximum. Estimated power dissipation at 5V / 4 MHz / full I/O load: less than 100 mW.
Informações de conformidade
Obsolete Microchip part. RoHS-compliant per Microchip product page; REACH compliance confirmed via DigiKey. Not AEC-Q100 qualified - this is a non-automotive grade MCU. For new automotive designs, use AEC-Q100 qualified PIC16F74-I/P or PIC16F77-I/P equivalents.
