PIC16LC67T-04I/PQ - 14KB OTP 8-bit MCU, 4MHz, 44-MQFP | Microchip
N.º da peça: PIC16LC67T-04I/PQ ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.01 | $3,01 |
| 10 | $2.85 | $28,50 |
| 100 | $2.5 | $250,00 |
| 500 | $2.18 | $1.090,00 |
| 1.000 | $1.92 | $1.920,00 |
PIC16LC67T-04I/PQ Visão geral
What is a microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory (here One-Time-Programmable EPROM), volatile data memory (RAM), peripherals, and I/O. The PIC16LC67 sits inside the PIC16C sub-family and shares the baseline PIC instruction set with PIC16C6X devices, putting it in the broader hierarchy of 8-bit microcontroller -> embedded controller -> integrated circuit. The architecture's hallmark is deterministic instruction timing and code density - one 14-bit instruction per clock cycle - which simplifies real-time firmware development versus accumulator-based 8-bit cores.
Key features include 33 digital I/O lines across five ports (PORTA-PORTE), three timer/counter modules (Timer0, Timer1, Timer2), a 5-channel 8-bit ADC, two PWM modules, and a Watchdog Timer with its own on-chip RC oscillator for reliable operation. Communication peripherals include USART/SCI, SPI, and I2C (Master/Slave) plus a Parallel Slave Port (PSP), making the device suitable for both sensor and host-bus interfacing. On-chip safety features include Brown-Out Detect (BOD), Power-On Reset (POR), and a programmable code-protection scheme that supports partial and full memory lock.
Typical applications include industrial control panels, smart instrumentation, sensor hubs with serial reporting, low-power battery-powered metering, and white-goods motor control where the ADC plus PWM combination eliminates external analog/driver ICs. The MQFP-44 footprint gives the same generous ground/power pinout that has been standard across PIC16C6X since the late 1990s, easing PCB reuse for designers migrating between PIC16C6X variants.
Designers should treat the OTP memory as truly one-time - any firmware update requires a new device - and budget at least 1 uF of decoupling on VDD with a 0.1 uF ceramic placed within 5 mm of the package. The clock input requires careful routing to avoid coupling noise into the ADC analog channel. This page consolidates distributor pricing, drop-in alternatives, and design considerations not available on the manufacturer landing page.
Alternativas drop-in para PIC16LC67T-04I/PQ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16LC67T-04I/PQ (mesmo formato e footprint) — diferindo em Program Memory Size, Package, ADC, Program Memory Type, Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16LC67-04I/PQ
✅ Drop-In✓ Em estoque
$7.05 / unidade
Ver ficha técnica →PIC16LC65BT-04I/PQ
✅ Drop-In✓ Em estoque
$5.45 / unidade
Ver ficha técnica →PIC16LC65B-04/PQ
✅ Drop-In✓ Em estoque
$2.5 / unidade
Ver ficha técnica →PIC16LC65A-04I/PQ
✅ Drop-In✓ Em estoque
$5.3 / unidade
Ver ficha técnica →PIC16LC67T-04I/PQ Classificações máximas e características elétricas
| Product Family | PIC16C6X (PIC16LC67) |
| Core Architecture | 8-bit RISC PIC |
| Program Memory Size | 14 KB (8K x 14) OTP/EPROM |
| RAM Size | 368 bytes |
| Frequência máxima de clock | 4 MHz |
| Instruction Set | 35 single-word instructions |
| Supply Voltage Range | 3.0 V to 6.0 V |
| Number of I/O Pins | 33 |
| Number of Timers | 3 |
| PWM Modules | 2 |
| ADC | 5 channels x 8-bit |
| Communication Peripherals | USART, SPI, I2C, PSP |
| Faixa de temperatura de operação | -40 C to +85 C (Industrial) |
| Encapsulamento | 44-pin MQFP (10x10 mm), Tape & Reel |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 |
Configuração de pinos do PIC16LC67T-04I/PQ
| Pino 1 | MCLR — Master Clear (Reset) input, active low |
| Pino 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Pino 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Pino 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 / VREF- |
| Pino 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / VREF+ |
| Pino 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Pino 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI slave select |
| Pino 8 | OSC1/CLKIN — Oscillator input / external clock input |
| Pino 9 | OSC2/CLKOUT — Oscillator output / clock output |
| Pino 10 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / clock input |
| Pino 11 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 PWM output |
| Pino 12 | RC2/CCP1 — PORTC bit 2 / CCP1 PWM output |
| Pino 13 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Pino 14 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Pino 15 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pino 16 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| Pino 17 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| Pino 18 | VSS — Ground |
| Pino 19 | VDD — Positive supply voltage (3.0V to 6.0V) |
| Pino 20 | RB0/INT — PORTB bit 0 / External interrupt |
| Pino 21 | RB1 — PORTB bit 1 |
| Pino 22 | RB2 — PORTB bit 2 |
| Pino 23 | RB3/PGM — PORTB bit 3 / Low-voltage programming |
| Pino 24 | RB4 — PORTB bit 4 |
| Pino 25 | RB5 — PORTB bit 5 |
| Pino 26 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pino 27 | RB7/PGD — PORTB bit 7 / ICSP data |
| Pino 28 | VSS — Ground |
| Pino 29 | VDD — Positive supply voltage |
| Pino 30 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| Pino 31 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| Pino 32 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| Pino 33 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| Pino 34 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| Pino 35 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| Pino 36 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port bit 6 |
| Pino 37 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port bit 7 |
| Pino 38 | RE0/RD — PORTE bit 0 / Parallel Slave Port read strobe |
| Pino 39 | RE1/WR — PORTE bit 1 / Parallel Slave Port write strobe |
| Pino 40 | RE2/CS — PORTE bit 2 / Parallel Slave Port chip select |
| Pino 41 | VSS — Ground |
| Pino 42 | VDD — Positive supply voltage |
| Pino 43 | NC — Not connected (per datasheet) |
| Pino 44 | NC — Not connected (per datasheet) |
Aplicações típicas
PIC16LC67T-04I/PQ é adequado para 6 aplicaçãos: Industrial Control Panels, Smart Sensor Hubs, Battery-Powered Metering, White-Goods Motor Control, Serial-Reporting Data Loggers, Human-Machine Interface Boards.
Industrial Control Panels
The PIC16LC67T-04I/PQ's 33 I/O pins and 5-channel 8-bit ADC make it well suited for industrial control-panel front-ends that read multiple potentiometers, panel buttons, and discrete sensors while driving relays and indicator LEDs. The 14 KB OTP holds full state-machine plus Modbus-RTU protocol stacks for a panel-mounted HMI. Wide-voltage 3.0V to 6.0V operation tolerates unregulated 24V-derived rails after a buck stage, and the -40 C to +85 C industrial range supports factory-floor enclosures. The 44-MQFP footprint keeps the design in an industry-standard package with broad second-source alternatives like PIC16LC67-04I/PQ.
Recomendado
Smart Sensor Hubs
The PIC16LC67T-04I/PQ integrates ADC, I2C, SPI, and USART peripherals, allowing one device to aggregate data from multiple sensor front-ends (temperature, pressure, flow) over I2C/SPI and report over a UART link to a host controller. Its 14 KB OTP holds custom calibration tables and a lightweight RTOS-style scheduler, while 368 bytes of RAM is enough for buffering a few sensor frames. The 4 MHz clock provides adequate throughput for polling loops in the 100 Hz range typical of environmental monitoring. Power consumption in the low-MA range at 3.3V suits battery-backed sensor nodes.
Recomendado
Battery-Powered Metering
Battery-powered metering benefits from the PIC16LC67T-04I/PQ's low-power CMOS process and 3.0V minimum supply, which enables 2xAA alkaline operation with a switching boost converter. Brown-Out Detect reliably resets the device when cells deplete, protecting EEPROM-style user logs from corruption. The ADC and PWM channels drive a multiplexed LCD segment driver or a low-cost LED bargraph display. The 14 KB OTP fits a metrology algorithm plus LCD-segment rendering tables, and the Watchdog Timer plus on-chip RC oscillator keep the system alive during brown-out events.
Recomendado
White-Goods Motor Control
Appliance motor control boards use the PIC16LC67T-04I/PQ's two PWM modules plus 5-channel ADC to drive a single BLDC or universal motor with closed-loop current and speed feedback. The 33 I/O lines interface Hall sensors, quadrature encoders, and discrete switches, while USART/SPI ports feed back telemetry to a higher-level appliance controller. Industrial -40 to +85 C operation covers refrigerator and washer environments, and the 44-MQFP provides good thermal dissipation at moderate PWM switching frequencies up to 25 kHz. The 14 KB OTP accommodates lookup tables for sinusoidal commutation.
Recomendado
Serial-Reporting Data Loggers
Data loggers that periodically sample analog inputs and transmit over RS-232 or RS-485 benefit from the PIC16LC67T-04I/PQ's USART peripheral and 5-channel ADC. The 14 KB OTP holds a small file system driver for external I2C EEPROM or SPI flash, plus a Modbus-RTU frame parser. Brown-Out Detect and Watchdog Timer protect long unattended deployments, and the 3.0V to 6.0V range supports both 3.3V and 5V transceivers. Industrial temperature range allows outdoor or factory cabinet mounting.
Recomendado
Human-Machine Interface Boards
HMI front-end boards with keypads, rotary encoders, and small character LCDs can be built around the PIC16LC67T-04I/PQ, using its 33 I/O to scan 4x4 key matrices and drive HD44780-style LCDs in 4-bit mode. The 14 KB OTP holds custom menu trees, while 368 bytes RAM is enough for key debounce buffers and active-screen state. The PSP (Parallel Slave Port) interfaces to a host CPU that renders graphics, offloading the scan/keyboard logic to the PIC. Wide 3.0-6.0V supply matches both 3.3V and 5V system rails.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16LC67T-04I/PQ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16LC67-04I/PQ | PIC16LC65BT-04I/PQ | PIC16LC65B-04/PQ | PIC16LC65A-04I/PQ |
|---|---|---|---|---|---|
| Package | 44-MQFP (10x10 mm), T&R | 44-MQFP (10x10 mm), Tray | 44-MQFP (10x10 mm), T&R | 44-MQFP (10x10 mm), T&R | 44-MQFP (10x10 mm), T&R |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (KB OTP) | 14 KB | 14 KB | 7 KB | 7 KB | 7 KB |
| Maximum Clock | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| I/O Pins | 33 | 33 | 33 | 33 | 33 |
| Operating Voltage | 3.0V to 6.0V | 3.0V to 6.0V | 3.0V to 6.0V | 3.0V to 6.0V | 3.0V to 6.0V |
| Temperature Grade | Industrial -40 C to +85 C | Industrial -40 C to +85 C | Industrial -40 C to +85 C | Commercial 0 C to +70 C | Industrial -40 C to +85 C |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- Highest-density PIC16LC6X variant in MQFP-44 (vs PIC16LC65BT-04I/PQ)
- Industrial temperature grade with full memory (vs PIC16LC65B-04/PQ)
- Tape & Reel format for SMT high-volume (vs PIC16LC67-04I/PQ (Tray))
Notas de projeto
Place a 1 uF tantalum and a 0.1 uF ceramic decoupling capacitor as close as physically possible to each VDD/SS pin pair (pins 19/18, 29/28, 42/41). The PIC16LC67T-04I/PQ has three VDD pins distributed across the 44-MQFP package and each must be decoupled locally to prevent logic errors during high-current ADC or PWM switching events. Add a 10 uF bulk capacitor at the regulator output to handle transient loads during ADC conversions.
Route the analog inputs (RA0-RA5) away from digital switching traces, especially the PWM outputs on RC1/RC2. The 8-bit ADC does not include dedicated guard traces; physical separation is the primary isolation method. Keep the crystal/oscillator traces short and symmetric, surrounded by a ground pour on the same layer. MCLR should be pulled up to VDD through a 10 kohm resistor with a 100 nF cap to ground to allow in-circuit serial programming without spurious resets.
Because the PIC16LC67T-04I/PQ uses OTP EPROM, firmware bugs cannot be patched in-circuit - a new OTP window must be erased under UV light (for windowed variants) or a fresh part must be ordered (for OTP-only variants). Always validate firmware on a windowed PIC16C67 or a flash-based PIC16F877A equivalent before committing to OTP production. Additionally, code-protect bits cannot be reset on OTP parts without a full erase cycle, so set them only after final firmware verification.
Estimated: At VDD=5V, clock=4 MHz, and all 33 I/O lines sourcing 20 mA, the PIC16LC67T-04I/PQ dissipates roughly 100 mA * 5V + CMOS core current, yielding an estimated 0.6W junction dissipation. The 44-MQFP has theta_JA around 50 C/W on a 4-layer JEDEC test board, giving an estimated junction rise of 30 C above ambient - well within the 125 C max junction. Designers should still verify worst-case dissipation if all I/O lines are simultaneously sourcing full current.
Informações de conformidade
Lifecycle status: obsolete. RoHS/REACH compliance not confirmed for this mature OTP variant - Microchip legacy datasheets typically predate RoHS transition. AEC-Q100 not applicable for PIC16C6X family.
