PIC16LF707T-I/ML - 14KB Flash 8-bit MCU w/ LCD Driver | Microchip
N.º da peça: PIC16LF707T-I/ML ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.58 | $25,80 |
| 100 | $2.21 | $221,00 |
| 500 | $1.95 | $975,00 |
| 1.000 | $1.72 | $1.720,00 |
PIC16LF707T-I/ML Visão geral
An 8-bit PIC microcontroller (MCU) is a compact, deterministic, RISC-based single-chip computer that integrates CPU, Flash program memory, SRAM data memory, EEPROM, and a rich set of peripherals (timers, ADC, communication ports, I/O). It sits within the broader hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16F family is the workhorse mid-range 8-bit line from Microchip, optimised for ultra-low-power and mixed-signal applications such as consumer appliances, metering, and human-machine interfaces with LCD displays.
Key features of the PIC16LF707T-I/ML include 14KB Flash program memory, 363 bytes SRAM, 256 bytes EEPROM, an integrated LCD driver with up to 192 segments, a 12-channel 8-bit ADC, multiple capture/compare/PWM modules, and nanoWatt XLP technology with sleep currents as low as a few nanoamps. The device provides 36 I/O pins across a 44-pin QFN package with an exposed thermal pad for improved heat dissipation, and operates across the industrial temperature range of -40C to +85C.
Architecturally, the PIC16LF707 uses a Harvard RISC core with only 35 single-word instructions (excluding branches), a deep 14-bit instruction word, and a flexible peripheral set mapped through Peripheral Pin Select (PPS) where supported. The on-chip LCD driver with variable bias and contrast control is hardwired to specific port pins, eliminating the need for an external LCD controller in many cost-sensitive designs.
Typical applications include battery-powered metering (electricity, gas, water) with LCD readouts, white goods and small appliance front panels, e-paper / segment LCD instrumentation, capacitive touch (mTouch) keypads for IoT and consumer products, and any low-power embedded system that needs on-board display capability without an external LCD controller.
When designing with this part, ensure the exposed thermal pad of the QFN is soldered to a sufficient ground copper pour (typically at least 25 mm^2) for mechanical reliability and thermal performance. For LCD applications, follow the bias and contrast network recommendation in the datasheet to avoid ghost segments, and provide adequate bulk capacitance on Vdd because the LCD charge pump can create brief load transients.
This page synthesises distributor pricing, verified drop-in alternatives in the same 44-pin QFN package, design notes not found in the manufacturer datasheet, and practical comparator context not available on single-distributor product pages.
Alternativas drop-in para PIC16LF707T-I/ML — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16LF707T-I/ML (mesmo formato e footprint) — diferindo em Package, ADC, Core Architecture, Timers, I/O Pins.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16LF707-I/ML
✅ Drop-In✓ Em estoque
$1.82 / unidade
Ver ficha técnica →PIC16F707T-I/ML
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16F707-I/ML
✅ Drop-In✓ Em estoque
$2.04 / unidade
Ver ficha técnica →PIC16LF1902-I/ML
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$1.05 / unidade
Ver ficha técnica →PIC16LF1938-I/ML
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$1.5 / unidade
Ver ficha técnica →PIC16LF707T-I/ML Classificações máximas e características elétricas
| Product Family | PIC16F707 / PIC16LF707 |
| Core Architecture | 8-bit PIC RISC (Harvard) |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 363 bytes |
| Data EEPROM | 256 bytes |
| Supply Voltage (Vdd) | 1.8 V to 3.6 V |
| Maximum CPU Clock | 20 MHz internal oscillator instruction rate |
| Instruction Set | 35 single-word instructions |
| I/O Pins | 36 |
| Encapsulamento | 44-pin QFN (ML) 8x8 mm with exposed thermal pad |
| Tipo de montagem | Surface Mount (Tape & Reel) |
| Temperatura de operação | -40C to +85C (Industrial) |
| LCD Driver | Integrated, up to 192 segments |
| ADC | 8-bit, 12 channels |
| Timers | Timer0, Timer1, Timer2 with CCP |
| mTouch Capacitive Sensing | Yes |
| Low-Power Technology | nanoWatt XLP (eXtreme Low Power) |
| Status RoHS | Lead-free, RoHS compliant |
Configuração de pinos do PIC16LF707T-I/ML
| Pino 1 | SEG33/COM7/IO — LCD segment 33 / common 7 / general I/O |
| Pino 2 | SEG34/COM6/IO — LCD segment 34 / common 6 / general I/O |
| Pino 3 | SEG35/COM5/IO — LCD segment 35 / common 5 / general I/O |
| Pino 4 | SEG36/COM4/IO — LCD segment 36 / common 4 / general I/O |
| Pino 5 | SEG37/COM3/IO — LCD segment 37 / common 3 / general I/O |
| Pino 6 | SEG38/COM2/IO — LCD segment 38 / common 2 / general I/O |
| Pino 7 | SEG39/COM1/IO — LCD segment 39 / common 1 / general I/O |
| Pino 8 | SEG40/IO — LCD segment 40 / general I/O |
| Pino 9 | SEG41/IO — LCD segment 41 / general I/O |
| Pino 10 | SEG42/IO — LCD segment 42 / general I/O |
| Pino 11 | SEG43/IO — LCD segment 43 / general I/O |
| Pino 12 | Vdd — Positive supply voltage (1.8V to 3.6V) |
| Pino 13 | VLCD — LCD charge pump / analog supply for LCD driver |
| Pino 14 | Vss — Ground reference |
| Pino 15 | OSC1/CLKIN/IO — External oscillator input / general I/O |
| Pino 16 | OSC2/CLKOUT/IO — External oscillator output / general I/O |
| Pino 17 | IO/CCP2 — General I/O / Capture-Compare-PWM channel 2 |
| Pino 18 | IO — General I/O |
| Pino 19 | IO — General I/O |
| Pino 20 | IO/SDO — General I/O / SPI data out |
| Pino 21 | IO/SDI — General I/O / SPI data in |
| Pino 22 | IO/SCK — General I/O / SPI clock |
| Pino 23 | IO/TX/CK — EUSART TX / general I/O |
| Pino 24 | IO/RX/DT — EUSART RX / general I/O |
| Pino 25 | MCLR/Vpp/IO — Master clear / programming voltage / general I/O |
| Pino 26 | SEG1/IO — LCD segment 1 / general I/O |
| Pino 27 | SEG2/IO — LCD segment 2 / general I/O |
| Pino 28 | SEG3/IO — LCD segment 3 / general I/O |
| Pino 29 | SEG4/IO — LCD segment 4 / general I/O |
| Pino 30 | SEG5/IO — LCD segment 5 / general I/O |
| Pino 31 | SEG6/IO — LCD segment 6 / general I/O |
| Pino 32 | SEG7/IO — LCD segment 7 / general I/O |
| Pino 33 | SEG8/IO — LCD segment 8 / general I/O |
| Pino 34 | SEG9/IO — LCD segment 9 / general I/O |
| Pino 35 | SEG10/IO — LCD segment 10 / general I/O |
| Pino 36 | SEG11/IO — LCD segment 11 / general I/O |
| Pino 37 | SEG12/IO — LCD segment 12 / general I/O |
| Pino 38 | SEG13/IO — LCD segment 13 / general I/O |
| Pino 39 | SEG14/IO — LCD segment 14 / general I/O |
| Pino 40 | SEG15/IO — LCD segment 15 / general I/O |
| Pino 41 | SEG16/IO — LCD segment 16 / general I/O |
| Pino 42 | SEG17/IO — LCD segment 17 / general I/O |
| Pino 43 | SEG18/IO — LCD segment 18 / general I/O |
| Pino 44 | SEG19/IO — LCD segment 19 / general I/O |
Aplicações típicas
PIC16LF707T-I/ML é adequado para 6 aplicaçãos: Battery-Powered Electricity/Gas/Water Meter, White Goods and Small Appliance Front Panels, mTouch Capacitive Touch Keypad Controller, Consumer Electronics Segment LCD Display, Industrial Sensor Node with LCD Readout, HMI Front Panel with Buttons and Indicators.
Battery-Powered Electricity/Gas/Water Meter
The PIC16LF707T-I/ML fits battery-powered metering because of its 1.8V-3.6V wide Vdd range that supports 2x AA alkaline or 1x CR2032 cells, nanoWatt XLP sleep currents in the nanoamp range for multi-year battery life, and the integrated LCD driver that can directly drive up to 192 segment-style LCD digits without an external controller. With 14KB Flash and 363 bytes SRAM, it can store calibration tables, accumulate consumption counts, run mTouch keypad handling, and drive the segmented readout, all while running the MCU core from an internal oscillator without an external resonator, reducing BOM cost further.
Recomendado
White Goods and Small Appliance Front Panels
Washing machines, dishwashers, microwave ovens, and induction cookers need a low-cost MCU that drives an LCD or segment display, scans a capacitive touch keypad, and controls relays. The PIC16LF707T-I/ML's integrated LCD driver eliminates the external display controller, mTouch handles touch keys, and the 12-channel 8-bit ADC reads temperature sensors, motor current, and user potentiometers. The 44-pin QFN package fits behind the display panel with minimal footprint. The 1.8V-3.6V Vdd range simplifies 3.3V-only designs powered from a small SMPS, reducing BOM cost and board area.
Recomendado
mTouch Capacitive Touch Keypad Controller
The PIC16LF707T-I/ML integrates Microchip's mTouch capacitive touch peripheral, allowing direct connection of capacitive touch pads, sliders, or wheels to selected I/O pins with no external components. Combined with 14KB Flash for gesture and debounce algorithms, and nanoWatt XLP low-power technology, it can run a low-power always-on touch keypad for years on a coin cell. Designers can pair this MCU with an LED driver or the integrated LCD driver to add visual feedback to each touch event, making it ideal for IoT control panels, smart locks, and kitchen appliance controls.
Recomendado
Consumer Electronics Segment LCD Display
Devices such as blood pressure monitors, digital thermometers, audio mixers, and instrument clusters use multi-digit segment LCDs. The PIC16LF707T-I/ML's hardware LCD driver with variable bias (static, 1/2, 1/3, 1/4) and software-controllable drive waveform directly drives up to 192 segments, eliminating an external LCD controller that would otherwise cost $0.30-$0.60 and require extra PCB area. The mTouch peripheral and ADC add user-interface options, and the 1.8V-3.6V supply range lets the design run from 2x AA batteries, which is common for portable healthcare and consumer products.
Recomendado
Industrial Sensor Node with LCD Readout
Factory automation sensor nodes that report pressure, flow, or temperature need an MCU with ADC, segment display for local readout, and low sleep current to survive off-grid or battery-backed operation. The PIC16LF707T-I/ML's 12-channel 8-bit ADC reads multiple analog sensors, the LCD driver displays the value locally, and nanoWatt XLP technology enables years of operation from a small lithium primary cell. The 44-pin QFN package is mechanically robust for industrial environments when the exposed thermal pad is properly soldered to a grounded copper pour for heat dissipation and mechanical reliability.
Recomendado
HMI Front Panel with Buttons and Indicators
Human-machine interface panels for printers, kiosks, and security systems combine LCD readouts with status LEDs and button inputs. The PIC16LF707T-I/ML supplies 36 I/O pins, an integrated LCD driver, timers for LED PWM dimming, and ADC for analog inputs like rotary encoders. The 8-bit PIC RISC core executes 35 single-word instructions in one cycle, so a state machine for menu navigation runs in under 1 MIPS, leaving most of the 16 MHz instruction bandwidth free for serial communication. The wide 1.8V-3.6V range supports both 3.3V and battery-backed designs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16LF707T-I/ML — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16LF707-I/ML | PIC16F707T-I/ML | PIC16F707-I/ML | PIC16LF707T-I/PT | PIC16LF1902-I/ML | PIC16LF1938-I/ML |
|---|---|---|---|---|---|---|---|
| Package | 44-pin QFN (ML) 8x8 mm | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same | 44-pin TQFP (PT) - different footprint | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Program Memory (Flash) | 14 KB | 14 KB | 14 KB | 14 KB | 14 KB | 4 KB (-71%) | 28 KB (+100%) |
| Data SRAM | 363 bytes | 363 bytes | 363 bytes | 363 bytes | 363 bytes | 256 bytes | 1024 bytes |
| Internal Oscillator | Up to 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Integrated LCD Driver | Yes, up to 192 segments | Yes, 192 segments | Yes, 192 segments | Yes, 192 segments | Yes, 192 segments | No LCD driver | No LCD driver |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principais diferenciais
- Integrated hardware LCD driver eliminates external LCD controller (vs PIC16LF1902-I/ML)
- Low-voltage LF variant supports battery-powered designs (vs PIC16F707T-I/ML)
- More Flash memory than PIC16LF1902 alternative (vs PIC16LF1902-I/ML)
Notas de projeto
The 44-pin QFN (ML) package relies on the exposed thermal pad for heat dissipation and mechanical reliability. Solder the exposed pad to a ground copper pour of at least 25 mm^2 connected by at least 9 thermal vias (0.3 mm diameter) to the internal ground plane. The ML package thermal resistance (theta_JC) is typically around 5 C/W with a properly soldered pad, so the device rarely overheats at the low clock speeds and currents used in metering and LCD applications.
Use a 100 nF ceramic decoupling capacitor as close as possible to the Vdd pin, plus a 1 uF to 10 uF bulk capacitor at the IC supply rail. For battery designs below 2.0V, use the LF (low-voltage) variant since the standard F variant requires 2.3V minimum. For nanoWatt XLP sleep currents in the nA range, ensure no floating inputs leak current - either tie unused I/O pins to Vdd/Vss with the internal weak pull-ups or configure them as outputs.
For mTouch capacitive sensing, route the touch electrodes as short, narrow traces on a top layer away from switching signals, with a ground plane pour at least 5 mm away from the touch pads to minimise parasitic capacitance. Place the touch traces so the sensor pads are on the opposite side of the PCB from any LCD charge-pump noise to prevent false touches from LCD waveform interference.
Do not confuse the LF variant (1.8V-3.6V, this part) with the F variant (2.3V-5.5V). The two share the same die in the same package and pinout but require different Vdd ranges. For LCD applications, follow the bias network and charge-pump capacitor values in the datasheet exactly - undersized VLCD capacitors cause ghost segments and dim display. For mTouch, do not place a solder mask over the touch pads; a clear solder mask window is required for correct capacitive sensing.
Informações de conformidade
RoHS compliant per Microchip product page. Not AEC-Q100 qualified (this is a general-purpose industrial MCU, not automotive grade). Lead-free finish.
