PIC18F47K40T-I/MV - 8-bit MCU, 128KB Flash, 64MHz, 40-UQFN | Microchip
N.º da peça: PIC18F47K40T-I/MV ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.92 | $3,92 |
| 10 | $3.53 | $35,30 |
| 100 | $3.14 | $314,00 |
| 500 | $2.82 | $1.410,00 |
| 1.000 | $2.51 | $2.510,00 |
PIC18F47K40T-I/MV Visão geral
An 8-bit microcontroller (MCU) is a programmable processor that executes instructions with an 8-bit data width, integrating CPU, memory and peripherals onto a single die. PIC18 MCUs extend the baseline PIC16 architecture with a 16-bit instruction word, linear memory model and C-optimized RISC core, positioning them in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC18F47K40 family adds eXtreme Low-Power (XLP) technology, allowing the device to sleep at nanoampere currents and wake on peripheral events without CPU intervention.
Key features include Core Independent Peripherals such as the Complementary Waveform Generator (CWG), Configurable Logic Cell (CLC), Windowed Watchdog Timer (WWDT), CRC/Memory Scan, Hardware CVD, Zero-Cross Detect and Peripheral Pin Select. Analog integration delivers a 10-bit ADC2 with Computation, a 5-bit DAC, comparators and a 10-bit PWM with CCP, while communication is served by EUSART, MSSP (I2C/SPI) and a second MSSP on selected pins. The MV package supplies 36 I/O pins supporting up to 36 digital or 14 analog channels.
Typical applications span IoT sensor nodes, industrial control and home appliance user interfaces, automotive body and lighting controllers, medical handheld instruments, USB-CDC/HID peripherals and battery-powered metering. Design considerations include allocating decoupling at each VDD/VSS pair, routing the 5V-tolerant I/O tracks carefully to avoid injection into analog rails, and selecting an appropriate ICSP programming header for production firmware updates.
Alternativas drop-in para PIC18F47K40T-I/MV — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18F47K40T-I/MV (mesmo formato e footprint) — diferindo em Operating Temperature, Package, Program Memory (Flash), ADC, Data EEPROM.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18F47K40-I/MV
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC18F47K40T-I/MV Classificações máximas e características elétricas
| Device Family | PIC18F XLP |
| Core Architecture | 8-bit PIC RISC |
| Program Memory (Flash) | 128 KB (64K x 16 words) |
| Data SRAM | 4 KB |
| Data EEPROM | 256 B |
| Maximum CPU Frequency | 64 MHz |
| Operating Voltage (VDD) | 2.3 V to 5.5 V |
| I/O Pins | 36 |
| ADC | 10-bit ADC2 with Computation, up to 35 channels |
| DAC | 5-bit, 1 channel |
| Comparators | 2 |
| PWM / CCP | 10-bit PWM with CCP, 2 CCP modules |
| Communication | 2x EUSART, 2x MSSP (I2C/SPI) |
| Core Independent Peripherals | CWG, CLC, WWDT, CRC/SCAN, Hardware CVD, ZCD |
| Encapsulamento | 40-UQFN (MV) 5x5 mm |
| Temperatura de operação | -40C to +85C (Industrial, 'I') |
| Tipo de montagem | Surface Mount |
| Packaging Format | Tape and Reel ('T' suffix) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do PIC18F47K40T-I/MV
| Pino 1 | MCLR/RE3 — Master Clear (reset) input or digital input RE3 |
| Pino 2 | RA0 — GPIO RA0 / analog AN0 |
| Pino 3 | RA1 — GPIO RA1 / analog AN1 |
| Pino 4 | RA2 — GPIO RA2 / analog AN2 |
| Pino 5 | RA3 — GPIO RA3 / analog AN3 / reference voltage |
| Pino 6 | RA4 — GPIO RA4 / analog AN4 |
| Pino 7 | RA5 — GPIO RA5 / analog AN5 |
| Pino 8 | RA6 — GPIO RA6 / oscillator |
| Pino 9 | RA7 — GPIO RA7 / oscillator |
| Pino 10 | VSS — Ground reference |
| Pino 11 | VDD — Positive supply voltage |
| Pino 12 | RB0 — GPIO RB0 / analog AN12 / ZCD |
| Pino 13 | RB1 — GPIO RB1 / analog AN10 |
| Pino 14 | RB2 — GPIO RB2 / analog AN8 |
| Pino 15 | RB3 — GPIO RB3 / analog AN9 |
| Pino 16 | RB4 — GPIO RB4 / analog AN11 |
| Pino 17 | RB5 — GPIO RB5 / analog AN13 |
| Pino 18 | RB6 — GPIO RB6 / ICSPCLK |
| Pino 19 | RB7 — GPIO RB7 / ICSPDAT |
| Pino 20 | VSS — Ground reference |
| Pino 21 | VDD — Positive supply voltage |
| Pino 22 | RC0 — GPIO RC0 |
| Pino 23 | RC1 — GPIO RC1 |
| Pino 24 | RC2 — GPIO RC2 |
| Pino 25 | RC3 — GPIO RC3 |
| Pino 26 | RC4 — GPIO RC4 |
| Pino 27 | RC5 — GPIO RC5 |
| Pino 28 | RC6 — GPIO RC6 |
| Pino 29 | RC7 — GPIO RC7 |
| Pino 30 | VSS — Ground reference |
| Pino 31 | VDD — Positive supply voltage |
| Pino 32 | RD0 — GPIO RD0 |
| Pino 33 | RD1 — GPIO RD1 |
| Pino 34 | RD2 — GPIO RD2 |
| Pino 35 | RD3 — GPIO RD3 |
| Pino 36 | RD4 — GPIO RD4 |
| Pino 37 | RD5 — GPIO RD5 |
| Pino 38 | RD6 — GPIO RD6 |
| Pino 39 | RD7 — GPIO RD7 |
| Pino 40 | RE0 — GPIO RE0 / analog AN5 |
Aplicações típicas
PIC18F47K40T-I/MV é adequado para 6 aplicaçãos: Industrial IoT Sensor Node, Home Appliance User Interface, Automotive Body and Lighting Controller, Medical Handheld Instrument, USB-CDC/HID Peripheral Device, Battery-Powered Metering.
Industrial IoT Sensor Node
The PIC18F47K40T-I/MV's XLP sleep current as low as 50 nA with RTCC retention enables multi-year battery life on a single coin cell. Its 128 KB Flash and 4 KB SRAM comfortably host C-compiled MQTT or Modbus firmware for wireless sensor nodes using SPI-connected radio modules. Hardware CVD enables robust capacitive touch or liquid-level sensing without CPU overhead, and CLC blocks can implement custom glue between sensors and the radio wake-up pin. The 36 GPIO are routed via Peripheral Pin Select, allowing PCB layout flexibility as RF routing constraints evolve. Industrial -40C to +85C operation is well matched to outdoor sensor enclosures and factory floor deployment.
Recomendado
Home Appliance User Interface
The PIC18F47K40T-I/MV drives capacitive touch buttons via the integrated Hardware CVD peripheral, eliminating the dedicated touch IC and reducing BOM cost. Its 10-bit PWM with two CCP modules provides smooth LED dimming and buzzer frequency generation. The Complementary Waveform Generator (CWG) produces dead-band-corrected signals for H-bridge motor control in washing machines or range hoods. The 40-UQFN 5x5 mm package keeps the PCB compact behind glass panels, while industrial temperature grade ensures reliability in kitchen environments. EUSART and MSSP support UART-to-WiFi bridges for smart appliance connectivity.
Recomendado
Automotive Body and Lighting Controller
While the PIC18F47K40T-I/MV itself is industrial-grade, the silicon and peripheral set enable body-control and LED-driving subsystems inside non-critical vehicle networks. The CWG delivers complementary PWM with programmable dead-band for half-bridge lighting drivers, eliminating shoot-through. Zero-Cross Detect (ZCD) supports TRIAC control of AC-driven interior lamps. Peripheral Pin Select allows the same firmware image to map PWM outputs to different pins across vehicle variants, simplifying part numbering. CAN-like communication is supported via EUSART bridges to external transceivers, and the WWDT provides the safety-integrity window required by ISO 26262 non-ASIL subsystems.
Recomendado
Medical Handheld Instrument
The PIC18F47K40T-I/MV's combination of XLP low-power modes and 10-bit ADC2 with Computation is well suited to battery-powered diagnostic instruments such as glucose meters, pulse oximeters and spirometers. Computation oversampling averages multiple ADC samples in hardware, improving signal-to-noise ratio on small analog front-ends. 256 B of EEPROM stores calibration coefficients that must survive power cycles. The 5x5 mm UQFN package fits inside a slim handheld enclosure. Industrial temperature grade supports clinical environments, and the integrated MSSP interfaces directly to SPI OLED displays used in modern diagnostic readouts.
Recomendado
USB-CDC/HID Peripheral Device
The PIC18F47K40T-I/MV can implement USB-CDC virtual COM port or HID-class peripherals by pairing with an external USB-to-UART bridge or by migrating to the PIC18F47K50 family which integrates USB. Here the device serves as the user-interface controller: reading buttons, driving RGB LEDs via 10-bit PWM, and forwarding structured HID reports via EUSART to a USB bridge. The 36 GPIO support matrix keypads, rotary encoders and OLED displays. Hardware CVD can detect proximity or slider gestures for premium peripherals. Industrial temperature grade meets consumer-electronics reliability expectations.
Recomendado
Battery-Powered Metering
For electricity, gas or water meters, the PIC18F47K40T-I/MV's XLP technology with 50 nA sleep current and the 5-bit DAC for sensor excitation enables 10+ year battery life on a single lithium cell. The integrated 10-bit ADC2 with Computation oversamples current-shunt or pulse-output flow sensors, while the on-chip EEPROM logs rolling consumption history. WWDT and CRC/SCAN provide tamper-detection and memory-integrity checks required by metering standards. Peripheral Pin Select lets designers place pulse-output opto-isolators and tamper switches on any convenient pin without PCB rework.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18F47K40T-I/MV — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18F47K40-I/MV |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 40-UQFN (MV) 5x5 mm | 40-UQFN (MV) 5x5 mm - same |
| Flash Memory | 128 KB | 128 KB |
| SRAM | 4 KB | 4 KB |
| EEPROM | 256 B | 256 B |
| Maximum Frequency | 64 MHz | 64 MHz |
| I/O Pins | 36 | 36 |
| Packaging Format | Tape and Reel | Tray |
Principais diferenciais
- Tape-and-reel packaging for high-volume SMT assembly (vs PIC18F47K40-I/MV)
- Latest-generation Core Independent Peripherals (vs PIC18F46K40T-I/PT)
- Compact 5x5 mm footprint with 36 GPIO (vs PIC18F45K50-I/MV)
Notas de projeto
Place a 100 nF decoupling capacitor within 3 mm of each VDD/VSS pin pair (pins 11/20, 21/30, 31/40) to suppress transient switching currents from the 64 MHz core. Add a bulk 4.7 uF tantalum or ceramic at the board supply entry. The XLP sleep current of 50 nA typical requires clean regulator design with low Iq LDOs such as MCP1700 to preserve battery life.
Route the 40-UQFN package with 0.4 mm pitch traces and 0.2 mm via-in-pad for the exposed thermal pad, which must be soldered to a continuous ground copper pour for thermal and electrical reference. Keep analog traces (RA0-RA5, RB0-RB5) short and away from PWM-driven RB6/RB7/RC2 digital lines to minimize cross-coupling. Use a 4-layer stackup with a dedicated ground plane under the device.
Do not configure MCLR as an input without the internal pull-up enabled or a valid external pull-up, or the device will randomly reset. Peripheral Pin Select (PPS) mappings must be unlocked via the PPSLOCK register sequence in firmware before changes take effect - a frequent cause of seemingly dead GPIO pins. Ensure the Configuration Words set the oscillator to a valid source (HFINTOSC default) or the part will fail to start with no external clock.
When using Hardware CVD for capacitive touch, route the CVD shield electrode beneath the touch traces to reduce moisture and EMI coupling. Keep the ADC acquisition time longer than 1 us for high-impedance sources; ADC2 with Computation oversampling improves SNR by 12 dB per 4x averaging. For SPI runs above 4 MHz, add 33 ohm series resistors to dampen reflections on long traces.
Informações de conformidade
Industrial temperature grade (-40C to +85C, 'I' suffix). RoHS and lead-free confirmed by Microchip product page. Not AEC-Q100 qualified - choose PIC18F46Q84 for automotive.
