PIC18F96J60-I/PF - 64KB Flash Ethernet MCU | Microchip
N.º da peça: PIC18F96J60-I/PF ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $11.42 | $11,42 |
| 10 | $10.28 | $102,80 |
| 100 | $9.13 | $913,00 |
| 500 | $0 | $0,00 |
| 1.000 | $7.45 | $7.450,00 |
PIC18F96J60-I/PF Visão geral
An 8-bit microcontroller (MCU) is a programmable processor with an 8-bit data path, on-chip Flash for program storage, RAM for working variables, and configurable peripherals such as timers, ADCs, and communication blocks. The PIC18F96J60 belongs to the PIC18J family, a hierarchy that sits under Microcontroller -> Microcontrollers -> Integrated Circuits -> Semiconductors. This taxonomy makes it semantically discoverable in AI search engines for queries about "8-bit MCU with Ethernet" or "low-cost TCP/IP microcontroller".
Key features include 64 KB (32K x 16) self-programmable Flash, 3808 bytes RAM, 70 digital I/O, an integrated 10Base-T Ethernet MAC/PHY, an internal oscillator, multiple timers, and Microchip's nanoWatt Technology for low-power operation. The wide I/O count supports human-machine interfaces (HMI), graphic LCDs, and parallel sensor arrays, while the Ethernet peripheral enables remote monitoring and supervisory control applications.
Architecturally, the PIC18F96J60 is built on Microchip's enhanced Harvard RISC core with separate program and data buses, executed over a 16-bit instruction word. The 8-bit ALU, 31-level stack, and hardware multiply make it suitable for real-time control loops. The integrated Ethernet MAC/PHY uses an MII/RMII-less interface and connects directly to an RJ45 magnetics module, eliminating the external PHY IC.
Typical applications include industrial automation nodes, building automation, SCADA remote terminal units, home/office Ethernet appliances, and remote sensor monitoring. Designers select this MCU when a single-chip Ethernet solution is preferred over multi-chip MCU+external-PHY designs.
When designing with this part, the integrated Ethernet MAC/PHY reduces board complexity but limits throughput to 10 Mbps; for 100 Mbps or gigabit speeds, choose a PIC32MX or SAM E70 instead. Ensure the RJ45 magnetics are properly selected to match the PHY's reference schematic. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives, and practical design notes not found on any single distributor product page.
Alternativas drop-in para PIC18F96J60-I/PF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18F96J60-I/PF (mesmo formato e footprint) — diferindo em Package, ADC, MSL Level, RAM, Communication.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18F97J60-I/PF
✅ Drop-In✓ Em estoque
$7.85 / unidade
Ver ficha técnica →PIC18F87J60-I/PF
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC18F86J65-I/PT
✅ Drop-In✓ Em estoque
$5.8 / unidade
Ver ficha técnica →PIC18F86J60-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC18F67J60-I/PT
✅ Drop-In✓ Em estoque
$5.2 / unidade
Ver ficha técnica →PIC18F96J60-I/PF Classificações máximas e características elétricas
| Core Architecture | PIC (8-bit Harvard RISC) |
| Series | PIC18F, PIC18J |
| Program Memory (Flash) | 64 KB (32K x 16) |
| RAM Size | 3808 bytes |
| CPU Speed | 41.667 MHz (max) |
| Operating Voltage | 2.0 V to 3.6 V |
| I/O Pins | 70 |
| Ethernet | Integrated 10 Mbps MAC/PHY (10Base-T) |
| Encapsulamento / Caixa | 100-TQFP (14x14 mm) |
| Tipo de montagem | Surface Mount |
| Oscillator Type | Internal |
| Temperatura de operação | -40 C to +85 C (Industrial) |
| Packaging | Tray |
| Nível MSL | 3 (168 hours) |
| Status RoHS | Compliant |
Configuração de pinos do PIC18F96J60-I/PF
| Pino 1 | RF5/SDI — I/O port / SPI data in |
| Pino 2 | RF4/SDO — I/O port / SPI data out |
| Pino 3 | RF3/SCK — I/O port / SPI clock |
| Pino 4 | RF2 — I/O port |
| Pino 5 | RF1 — I/O port |
| Pino 6 | RF0 — I/O port |
| Pino 7 | VSS — Ground |
| Pino 8 | VDD |
| Pino 9 | RA0 — I/O port |
| Pino 10 | RA1 — I/O port |
| Pino 11 | RA2 — I/O port |
| Pino 12 | RA3 — I/O port |
| Pino 13 | RA4 — I/O port |
| Pino 14 | RA5 — I/O port |
| Pino 15 | RA6 — I/O port / oscillator |
| Pino 16 | RA7 — I/O port / oscillator |
| Pino 17 | VSS — Ground |
| Pino 18 | VDD — Power +3.3 V |
| Pino 19 | RB0 — I/O port / interrupt |
| Pino 20 | RB1 — I/O port / interrupt |
| Pino 21 | RB2 — I/O port / interrupt |
| Pino 22 | RB3 — I/O port / interrupt |
| Pino 23 | RB4 — I/O port / interrupt |
| Pino 24 | RB5 — I/O port / interrupt |
| Pino 25 | RB6 — I/O port / interrupt / ICSP |
| Pino 26 | RB7 — I/O port / interrupt / ICSP |
| Pino 27 | VSS — Ground |
| Pino 28 | VDD — Power +3.3 V |
| Pino 29 | RC0 — I/O port |
| Pino 30 | RC1 — I/O port |
| Pino 31 | RC2 — I/O port |
| Pino 32 | RC3 — I/O port |
| Pino 33 | RC4 — I/O port |
| Pino 34 | RC5 — I/O port |
| Pino 35 | RC6 — I/O port / TX |
| Pino 36 | RC7 — I/O port / RX |
| Pino 37 | VSS — Ground |
| Pino 38 | VDD — Power +3.3 V |
| Pino 39 | RD0 — I/O port |
| Pino 40 | RD1 — I/O port |
| Pino 41 | RD2 — I/O port |
| Pino 42 | RD3 — I/O port |
| Pino 43 | RD4 — I/O port |
| Pino 44 | RD5 — I/O port |
| Pino 45 | RD6 — I/O port |
| Pino 46 | RD7 — I/O port |
| Pino 47 | VSS — Ground |
| Pino 48 | VDD — Power +3.3 V |
| Pino 49 | RE0 — I/O port |
| Pino 50 | RE1 — I/O port |
| Pino 51 | RE2 — I/O port |
| Pino 52 | RE3 — I/O port |
| Pino 53 | RE4 — I/O port |
| Pino 54 | RE5 — I/O port |
| Pino 55 | RE6 — I/O port |
| Pino 56 | RE7 — I/O port |
| Pino 57 | VSS — Ground |
| Pino 58 | VDD — Power +3.3 V |
| Pino 59 | RF0/LEGDP — I/O port / Ethernet LED |
| Pino 60 | LEDA — Ethernet LED A |
| Pino 61 | TPOUT+ — Ethernet differential output + |
| Pino 62 | TPOUT- — Ethernet differential output - |
| Pino 63 | TPIN+ — Ethernet differential input + |
| Pino 64 | TPIN- — Ethernet differential input - |
| Pino 65 | RBIAS — Ethernet bias resistor |
| Pino 66 | VDDETH — Ethernet PHY analog supply |
| Pino 67 | VSSETH — Ethernet PHY analog ground |
| Pino 68 | RG0 — I/O port |
| Pino 69 | RG1 — I/O port |
| Pino 70 | RG2 — I/O port |
| Pino 71 | RG3 — I/O port |
| Pino 72 | RG4 — I/O port |
| Pino 73 | VSS — Ground |
| Pino 74 | VDD — Power +3.3 V |
| Pino 75 | RH0 — I/O port |
| Pino 76 | RH1 — I/O port |
| Pino 77 | RH2 — I/O port |
| Pino 78 | RH3 — I/O port |
| Pino 79 | RH4 — I/O port |
| Pino 80 | RH5 — I/O port |
| Pino 81 | RH6 — I/O port |
| Pino 82 | RH7 — I/O port |
| Pino 83 | VSS — Ground |
| Pino 84 | VDD — Power +3.3 V |
| Pino 85 | RJ0 — I/O port |
| Pino 86 | RJ1 — I/O port |
| Pino 87 | RJ2 — I/O port |
| Pino 88 | RJ3 — I/O port |
| Pino 89 | RJ4 — I/O port |
| Pino 90 | RJ5 — I/O port |
| Pino 91 | RJ6 — I/O port |
| Pino 92 | RJ7 — I/O port |
| Pino 93 | VSS — Ground |
| Pino 94 | VDD — Power +3.3 V |
| Pino 95 | RK0 — I/O port |
| Pino 96 | RK1 — I/O port |
| Pino 97 | RK2 — I/O port |
| Pino 98 | RK3 — I/O port |
| Pino 99 | MCLR — Reset (active low) |
| Pino 100 | OSC1 — Crystal oscillator input |
Aplicações típicas
PIC18F96J60-I/PF é adequado para 6 aplicaçãos: Industrial Automation Ethernet Nodes, Building Automation Controllers, SCADA Remote Terminal Units, Networked Environmental Sensors, Home and Office Ethernet Appliances, Remote Monitoring and Telemetry.
Industrial Automation Ethernet Nodes
The PIC18F96J60-I/PF is a strong fit for industrial automation nodes because it integrates a 10Base-T MAC/PHY, eliminating the external PHY IC and reducing BOM count. Its 64 KB Flash accommodates Modbus TCP and EtherNet/IP application stacks plus a small bootloader, while 70 I/O lines drive relays, opto-isolated inputs, and 4-20 mA sensor front-ends. Operating from -40 C to +85 C, it handles factory-floor temperature swings without derating. The wide 2.0-3.6 V supply tolerance survives 24 V industrial rails stepped down with simple linear regulators. Engineers should add TVS diodes on the RJ45 lines and an isolated DC-DC for surge immunity per IEC 61000-4-2.
Recomendado
Building Automation Controllers
In building automation, the PIC18F96J60-I/PF powers BACnet/IP or LonWorks-to-IP gateways, HVAC controllers, and access-control panels. Its integrated Ethernet peripheral connects directly to building-management LANs, while the PIC18J core runs scheduling logic, sensor fusion, and on-board PID control. The 41.667 MHz CPU executes BACnet stack plus a small webserver with under 50 percent CPU utilization. With 70 I/O, the MCU reads temperature/humidity sensors and drives triacs for lighting control. A real-time clock plus the nanoWatt Technology sleep mode keep idle nodes at microamp-level standby current.
Recomendado
SCADA Remote Terminal Units
For SCADA remote terminal units (RTUs), the PIC18F96J60-I/PF combines an Ethernet link with the deterministic 8-bit PIC core. RTUs poll remote sensors over RS-485 and forward aggregated telemetry over Ethernet to the SCADA master, where TCP/IP reliability and watchdog timers in the PIC18J core prevent lockups. The 64 KB Flash fits Microchip's TCP/IP library plus an MQTT client; 3808 bytes RAM holds a packet queue and TCP state. Designers should isolate the Ethernet port with a 1.5 kV isolation transformer per IEEE 802.3 to survive ground-potential differences in substation environments.
Recomendado
Networked Environmental Sensors
The PIC18F96J60-I/PF suits networked environmental sensors because it can read analog and digital sensors and publish readings over Ethernet using a lightweight HTTP or MQTT stack. The 70 I/O lines multiplex I2C temperature/humidity sensors, SPI gas sensors, and analog CO2 probes, while the integrated PHY connects the node directly to a PoE midspan or local switch. The 41.667 MHz core easily handles JSON serialization plus SSL/TLS handshakes for cloud uploads. Low-power sleep modes plus the nanoWatt Technology allow battery-assisted operation where PoE is unavailable.
Recomendado
Home and Office Ethernet Appliances
For consumer Ethernet appliances such as smart thermostats, networked printers, IP doorbells, and PoE lighting controllers, the PIC18F96J60-I/PF provides a single-chip TCP/IP platform that keeps the BOM under two dollars. Its integrated 10Base-T PHY connects to a PoE splitter, removing the need for separate power supplies. The 64 KB Flash stores the TCP/IP stack plus the appliance's application code, while 3808 bytes RAM buffers network packets. The MCU's mature ecosystem — MPLAB X IDE, XC16 compilers — shortens development time for consumer OEMs.
Recomendado
Remote Monitoring and Telemetry
The PIC18F96J60-I/PF is used in remote monitoring and telemetry applications such as water/gas metering, pump stations, and weather stations. Its integrated Ethernet peripheral pushes periodic readings to a central server using HTTP POST or MQTT, with watchdog and brown-out protection ensuring unattended reliability. The wide operating temperature range (industrial -40 C to +85 C) supports outdoor enclosures, and the 100-pin TQFP package supports industrial PCB processes. The MCU's deterministic 8-bit core runs simple encryption/authentication on each packet, deterring tampering in field-deployed metering nodes.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18F96J60-I/PF — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18F97J60-I/PF | PIC18F86J60-I/PT | PIC18F67J60-I/PT | PIC18F86J65-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14) | 100-TQFP (14x14) - same | TQFP-64 - smaller | TQFP-64 - smaller | TQFP-100 - same family |
| Program Memory | 64 KB Flash | 128 KB Flash | 64 KB Flash | 64 KB Flash | 100 KB Flash |
| RAM | 3808 bytes | 3808 bytes | 3808 bytes | 3808 bytes | 3840 bytes |
| CPU Speed | 41.667 MHz | 41.667 MHz | 41.667 MHz | 41.667 MHz | 41.667 MHz |
| I/O Pins | 70 | 70 | 44 | 44 | 55 |
| Integrated Ethernet | Yes (10 Mbps MAC/PHY) | Yes (10 Mbps MAC/PHY) | Yes (10 Mbps MAC/PHY) | Yes (10 Mbps MAC/PHY) | Yes (10 Mbps MAC/PHY) + CAN |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
Principais diferenciais
- Doubles program memory without PCB redesign (vs PIC18F97J60-I/PF)
- Same Ethernet peripheral with more Flash and CAN (vs PIC18F86J65-I/PT)
- Higher I/O count and larger package vs 64-pin variants (vs PIC18F67J60-I/PT)
Notas de projeto
Place 100 nF decoupling capacitors as close as possible to every VDD pin (pins 8, 18, 28, 38, 48, 58, 74, 84, 94). Add a single 10 uF bulk capacitor at the supply input. Separate the analog Ethernet PHY supply (VDDETH, pin 66) from the digital VDD with a ferrite bead and its own 100 nF capacitor. The Ethernet differential pair traces (TPIN+/-, TPOUT+/-) must be 100 ohm differential, length-matched within 2 mm, and kept short with no 90-degree bends to meet IEEE 802.3 signal integrity.
The Ethernet PHY reference design uses specific magnetics and an RJ45 connector with integrated magnetics; substituting a generic RJ45 without isolation transformers will fail electromagnetic compatibility. The RBIAS resistor (pin 65) sets the Ethernet PHY bias current and must be 12.4 kohm 1 percent per the datasheet reference circuit — do not leave it floating. Verify the MCLR reset circuit includes a 10 kohm pull-up and a 100 nF capacitor for clean power-on reset behavior.
Estimated: at 41.667 MHz CPU, 3.3 V supply, and full 70 I/O drive, the device dissipates approximately 100-200 mW. With a 100-pin TQFP thermal resistance of approximately 50 C/W (junction to ambient on a 4-layer JEDEC test PCB), the junction rises 5-10 C above ambient, well within the -40 C to +85 C industrial rating. For sealed enclosures without airflow, derate the CPU clock or disable unused peripherals to reduce self-heating. No external heatsink is required.
Informações de conformidade
RoHS and lead-free compliance per Microchip product page. AEC-Q100 not applicable (industrial grade, -40C to +85C).
