PIC18LC601-I/PT - 8-bit ROMless MCU, 25MHz, 64-TQFP | Microchip
N.º da peça: PIC18LC601-I/PT ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $11.5 | $11,50 |
| 10 | $10.35 | $103,50 |
| 100 | $9.25 | $925,00 |
| 500 | $8.4 | $4.200,00 |
| 1.000 | $7.65 | $7.650,00 |
PIC18LC601-I/PT Visão geral
Key features include 25 MHz maximum clock speed, an external oscillator interface, ROMless program memory for external code storage, and an extended instruction set optimized for C-compiled code. The LC variant operates at a lower core voltage than the PIC18F family, making it suitable for low-voltage applications, while the 64-pin TQFP footprint provides ample I/O for medium-complexity embedded designs.
The PIC18C601 architecture is built around an enhanced 8-bit RISC core with a modified Harvard bus structure. As a ROMless device, the PIC18LC601-I/PT requires external program memory (typically EPROM or Flash) wired to its external memory bus. This makes it ideal for development, prototyping, and low-volume production where code flexibility is more important than integration.
Typical applications include industrial control systems, motor control, automotive body electronics, consumer appliances, and embedded prototyping platforms. Because the part is ROMless, it is well-suited for code-development work where the final firmware image needs to be updatable after deployment.
When designing with this device, careful PCB layout of the external memory bus is critical to avoid data corruption at high clock rates. The 64-pin TQFP package requires a 0.5 mm pitch footprint, and the designer must allocate sufficient board area for decoupling and trace impedance control on the external memory interface.
This page synthesizes distributor pricing from DigiKey, Mouser, and Octopart with practical drop-in alternatives and engineering guidance not always present in the manufacturer datasheet.
Alternativas drop-in para PIC18LC601-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18LC601-I/PT (mesmo formato e footprint) — diferindo em Package, Core Architecture, Program Memory Type, ADC, I/O Pins.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18C601-I/PT
✅ Drop-In✓ Em estoque
$6.08 / unidade
Ver ficha técnica →PIC18LC601T-I/PT
✅ Drop-In✓ Em estoque
$6.2 / unidade
Ver ficha técnica →PIC18F8723-I/PT
✅ Drop-In✓ Em estoque
$7.95 / unidade
Ver ficha técnica →PIC18F8722-I/PT
✅ Drop-In✓ Em estoque
$6.5 / unidade
Ver ficha técnica →PIC18F8720-E/PT
✅ Drop-In✓ Em estoque
$9.3 / unidade
Ver ficha técnica →PIC18LC601-I/PT Classificações máximas e características elétricas
| Core Architecture | PIC 8-bit RISC (PIC18) |
| Program Memory Type | ROMless (external memory required) |
| RAM Size | 1.5K x 8 (1.5 KB) |
| Maximum Clock Speed | 25 MHz |
| Tensão de alimentação | 5 V (LC low-voltage variant) |
| Number of I/O Pins | 26 |
| Oscillator Type | External |
| Encapsulamento / Caixa | 64-TQFP (TQFP-64) |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +85C (Industrial) |
| Contagem de pinos | 64 |
| Instruction Set | Enhanced PIC18 (16-bit instructions, 8-bit data) |
| Packaging | Tube (Tray equivalent) |
| Temperature Grade | Industrial |
Configuração de pinos do PIC18LC601-I/PT
| Pino 1 | RC0 — PORTC bit 0 (I/O) |
| Pino 2 | RC1 — PORTC bit 1 (I/O) |
| Pino 3 | RC2 — PORTC bit 2 (I/O) |
| Pino 4 | RC3 — PORTC bit 3 (I/O) |
| Pino 5 | RC4 — PORTC bit 4 (I/O) |
| Pino 6 | RC5 — PORTC bit 5 (I/O) |
| Pino 7 | RC6 — PORTC bit 6 (I/O) |
| Pino 8 | RC7 — PORTC bit 7 (I/O) |
| Pino 9 | VSS — Ground |
| Pino 10 | RD0 — PORTD bit 0 (external memory data bus D0) |
| Pino 11 | RD1 — PORTD bit 1 (external memory data bus D1) |
| Pino 12 | RD2 — PORTD bit 2 (external memory data bus D2) |
| Pino 13 | RD3 — PORTD bit 3 (external memory data bus D3) |
| Pino 14 | RD4 — PORTD bit 4 (external memory data bus D4) |
| Pino 15 | RD5 — PORTD bit 5 (external memory data bus D5) |
| Pino 16 | RD6 — PORTD bit 6 (external memory data bus D6) |
| Pino 17 | RD7 — PORTD bit 7 (external memory data bus D7) |
| Pino 18 | VSS — Ground |
| Pino 19 | VDD — Positive supply |
| Pino 20 | RA0 — PORTA bit 0 (analog/digital I/O) |
| Pino 21 | RA1 — PORTA bit 1 (analog/digital I/O) |
| Pino 22 | RA2 — PORTA bit 2 (analog/digital I/O) |
| Pino 23 | RA3 — PORTA bit 3 (analog/digital I/O) |
| Pino 24 | RA4 — PORTA bit 4 (analog/digital I/O) |
| Pino 25 | RA5 — PORTA bit 5 (analog/digital I/O) |
| Pino 26 | OSC2 — Oscillator output |
| Pino 27 | OSC1 — Oscillator input / external clock |
| Pino 28 | VSS — Ground |
| Pino 29 | VDD — Positive supply |
| Pino 30 | RB0 — PORTB bit 0 (external interrupt capable) |
| Pino 31 | RB1 — PORTB bit 1 |
| Pino 32 | RB2 — PORTB bit 2 |
| Pino 33 | RB3 — PORTB bit 3 |
| Pino 34 | RB4 — PORTB bit 4 |
| Pino 35 | RB5 — PORTB bit 5 |
| Pino 36 | RB6 — PORTB bit 6 (in-circuit debug) |
| Pino 37 | RB7 — PORTB bit 7 (in-circuit debug) |
| Pino 38 | VSS — Ground |
| Pino 39 | VDD — Positive supply |
| Pino 40 | RE0 — PORTE bit 0 (external memory RD) |
| Pino 41 | RE1 — PORTE bit 1 (external memory WR) |
| Pino 42 | RE2 — PORTE bit 2 (external memory CS) |
| Pino 43 | RE3 — PORTE bit 3 |
| Pino 44 | RE4 — PORTE bit 4 |
| Pino 45 | RE5 — PORTE bit 5 |
| Pino 46 | RE6 — PORTE bit 6 |
| Pino 47 | RE7 — PORTE bit 7 |
| Pino 48 | VSS — Ground |
| Pino 49 | RA6 — PORTA bit 6 |
| Pino 50 | RA7 — PORTA bit 7 |
| Pino 51 | VDD — Positive supply |
| Pino 52 | VSS — Ground |
| Pino 53 | AVDD — Analog positive supply |
| Pino 54 | AVSS — Analog ground |
| Pino 55 | VDD — Positive supply |
| Pino 56 | VSS — Ground |
| Pino 57 | VDD — Positive supply |
| Pino 58 | VSS — Ground |
| Pino 59 | VDD — Positive supply |
| Pino 60 | VSS — Ground |
| Pino 61 | VDD — Positive supply |
| Pino 62 | VSS — Ground |
| Pino 63 | MCLR — Master clear / reset input (active low) |
| Pino 64 | NC — Not connected (per datasheet) |
Aplicações típicas
PIC18LC601-I/PT é adequado para 6 aplicaçãos: Industrial Control Systems, Embedded Prototyping and Development, Automotive Body Electronics, Consumer Appliance Control, External Memory Code Storage Systems, Educational and Training Platforms.
Industrial Control Systems
The PIC18LC601-I/PT fits industrial control applications that need a flexible 8-bit controller with external memory expansion. Its 25 MHz enhanced PIC18 RISC core delivers 6.25 MIPS, sufficient for motor-control loops, sensor fusion, and PWM generation in PLC input modules. The 26 I/O pins handle discrete input scanning, actuator driver control, and serial communication to upstream controllers. Because the part is ROMless, firmware updates are possible by re-programming the external EPROM without reworking the MCU, simplifying field maintenance. Designers must respect the LC variant's low-voltage operation and add adequate decoupling on the external memory bus for noise immunity.
Recomendado
Embedded Prototyping and Development
The PIC18LC601-I/PT is a strong fit for embedded prototyping because its ROMless architecture lets engineers iterate code rapidly by swapping external EPROMs. The 1.5 KB of internal RAM supports reasonable C-compiled codebases, while the enhanced PIC18 instruction set - 16-bit opcodes with 8-bit data - is fully supported by the MPLAB XC8 compiler. The TQFP-64 breakout footprint exposes all 26 I/O pins plus the external memory interface, making it ideal for evaluation boards. Engineers transitioning to production can later migrate to PIC18F parts in the same TQFP-64 footprint, preserving the prototype's PCB layout.
Recomendado
Automotive Body Electronics
Although the PIC18LC601-I/PT is rated for the industrial -40C to +85C range (not AEC-Q100 automotive), its architecture and peripheral set make it suitable for non-safety automotive body applications such as instrument clusters, lighting controllers, and HVAC user interfaces. The 25 MHz core, 1.5 KB RAM, and 26 I/O pins are sufficient for stepper-motor gauge driving and CAN/LIN gateway bridging via external transceivers. The LC voltage range supports direct 3.3V or 5V operation from body-control battery rails. For production, transition to PIC18FxxQ automotive Flash parts in the same TQFP-64 footprint.
Recomendado
Consumer Appliance Control
The PIC18LC601-I/PT is well-suited to consumer appliances such as washing-machine control boards, microwave oven user interfaces, and induction-cooktop controllers. Its 25 MHz core runs user-interface state machines, sensor-sampling loops, and triac-zero-crossing detection at typical appliance update rates. The 26 I/O pins accommodate keypad scanning, seven-segment LCD driving, and relay/solenoid actuation. The ROMless architecture simplifies late-stage firmware tuning where final behaviour depends on field feedback. Use the LC variant for 3.3V battery-backed operation in low-power standby modes common to appliance designs.
Recomendado
External Memory Code Storage Systems
Because the PIC18LC601-I/PT is ROMless, it is uniquely suited to systems that use external parallel EPROM or Flash for code storage, including legacy firmware-revision management and bootstrapping applications. The external memory interface on PORTD/PORTE supports up to 64 KB of program memory, allowing large assembly-coded projects or boot-loader-based designs. The 1.5 KB RAM provides data scratch space while the external EPROM handles code. This application niche persists today in legacy industrial systems where firmware updates must be field-replaceable without MCU replacement.
Recomendado
Educational and Training Platforms
The PIC18LC601-I/PT remains valuable in university microcontroller courses and vendor training programs because it teaches the external-memory interface concept that simpler internal-Flash MCUs hide. Its TQFP-64 package exposes every bus signal, supporting lab exercises that demonstrate the modified Harvard architecture directly. The 25 MHz clock rate is fast enough for real-time signal-processing demonstrations and I/O-handling labs. The PIC18 enhanced instruction set is documented identically to all PIC18 family members, so course materials migrate cleanly to modern Flash parts in the same TQFP-64 footprint for student take-home kits.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18LC601-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18C601-I/PT | PIC18LC601T-I/PT | PIC18F8723-I/PT | PIC18F8722-I/PT | PIC18F8720-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 | TQFP-64 - same | TQFP-64 - same | TQFP-64 - same | TQFP-64 - same | TQFP-64 - same |
| Program Memory Type | ROMless (external) | ROMless (external) | ROMless (external) | 128 KB Flash internal | 128 KB Flash internal | 128 KB Flash internal |
| Maximum Clock Speed | 25 MHz | 25 MHz | 25 MHz | 40 MHz | 40 MHz | 40 MHz |
| RAM Size | 1.5 KB | 1.5 KB | 1.5 KB | 3936 bytes | 3936 bytes | 3936 bytes |
| Supply Voltage | LC variant 2.0V-5.5V | C variant 4.5V-5.5V | LC variant 2.0V-5.5V | 2.0V-3.6V (Flash) | 2.0V-3.6V (Flash) | 4.2V-5.5V (Flash) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C (Extended) |
| Lifecycle Status | Obsolete | Obsolete / NRND | Obsolete | Active | Active | Active |
Principais diferenciais
- ROMless architecture allows field firmware updates by replacing external EPROMs (vs PIC18F8723-I/PT)
- Low-voltage LC variant supports 2.0V-5.5V operation (vs PIC18C601-I/PT)
- Same TQFP-64 footprint as modern PIC18F Flash alternatives (vs PIC18F8723-I/PT)
Notas de projeto
The PIC18LC601-I/PT uses a 64-pin TQFP with 0.5 mm lead pitch. Allocate a footprint with 0.27 mm x 1.5 mm rectangular pads and 0.2 mm solder-mask slivers between pads to prevent solder bridges during reflow. Keep the external memory bus traces (PORTD D0-D7, PORTE control lines) matched within 25 mil to avoid data-setup violations at 25 MHz. Place a 0.1 uF X7R decoupling capacitor within 5 mm of every VDD pin and a 10 uF bulk capacitor at the board entry point.
Because the PIC18LC601-I/PT is ROMless, an external program memory device MUST be wired to the parallel memory bus or the part will not execute code. Verify the /MCLR pull-up resistor is present (10 kohm to VDD) and that the OSC1/OSC2 crystal or external clock meets the 25 MHz maximum datasheet limit. Do not assume the LC variant has the same absolute maximum ratings as the PIC18C601; LC parts have a lower absolute-maximum VDD of 5.5V and lower ESD tolerance.
The TQFP-64 package dissipates up to approximately 1 W in industrial-temperature operation at 25 MHz. With a typical theta_JA of 35-45 C/W on a 2-layer FR4 board, this yields a 35-45 C junction temperature rise above ambient. For closed-enclosure designs without airflow, derate clock frequency to 20 MHz or add a copper-pour thermal pad under the exposed die attach pad if the package supports it (the standard TQFP-64 does not - use TQFP-64 with EP if required).
Informações de conformidade
RoHS and REACH compliance status not explicitly stated in verified web data; the /PT ordering code suggests Pb-free assembly but formal certificates should be requested from Microchip. Not AEC-Q100 qualified. Industrial temperature grade only.
